{
	"activate_chamber_temp_control": [
		"1"
	],
	"chamber_temperature": [
		"50"
	],
	"compatible_printers": [
		"Flashforge Creator 5 Pro 0.4 nozzle",
		"Flashforge Creator 5 Pro 0.6 nozzle",
		"Flashforge Creator 5 Pro 0.8 nozzle"
	],
	"complete_print_exhaust_fan_speed": [
		"40"
	],
	"cool_plate_temp": [
		"0"
	],
	"cool_plate_temp_initial_layer": [
		"0"
	],
	"during_print_exhaust_fan_speed": [
		"40"
	],
	"enable_pressure_advance": [
		"1"
	],
	"eng_plate_temp": [
		"100"
	],
	"eng_plate_temp_initial_layer": [
		"100"
	],
	"fan_cooling_layer_time": [
		"5"
	],
	"fan_max_speed": [
		"30"
	],
	"fan_min_speed": [
		"10"
	],
	"filament_density": [
		"1.29"
	],
	"filament_max_volumetric_speed": [
		"7"
	],
	"filament_settings_id": [
		"Flashforge PET-CF @FF C5P"
	],
	"filament_start_gcode": [
		"; filament start gcode"
	],
	"filament_type": [
		"PET-CF"
	],
	"from": "system",
	"hot_plate_temp": [
		"100"
	],
	"hot_plate_temp_initial_layer": [
		"100"
	],
	"inherits": "Generic PETG-CF @System",
	"instantiation": "true",
	"is_custom_defined": "0",
	"name": "Flashforge PET-CF @FF C5P",
	"nozzle_temperature": [
		"270"
	],
	"nozzle_temperature_initial_layer": [
		"270"
	],
	"nozzle_temperature_range_high": [
		"290"
	],
	"nozzle_temperature_range_low": [
		"260"
	],
	"overhang_fan_speed": [
		"40"
	],
	"overhang_fan_threshold": [
		"0%"
	],
	"pressure_advance": [
		"0.0325"
	],
	"slow_down_layer_time": [
		"2"
	],
	"supertack_plate_temp": [
		"80"
	],
	"supertack_plate_temp_initial_layer": [
		"80"
	],
	"textured_cool_plate_temp": [
		"0"
	],
	"textured_cool_plate_temp_initial_layer": [
		"0"
	],
	"textured_plate_temp": [
		"100"
	],
	"textured_plate_temp_initial_layer": [
		"100"
	],
	"version": "2.3.0.3"
}