{
	"type": "machine",
	"name": "fdm_machine_eryone_ER20_common",
	"from": "system",
	"instantiation": "false",
	"auxiliary_fan": "0",
	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n",
	"best_object_pos": "0.5,0.5",
	"change_extrusion_role_gcode": "",
	"change_filament_gcode": "",
	"deretraction_speed": [
		"30"
	],
	"enable_filament_ramming": "0",
	"extruder_clearance_height_to_lid": "190",
	"extruder_clearance_height_to_rod": "36",
	"extruder_clearance_max_radius": "68",
	"extruder_colour": [
		"#FCE94F"
	],
	"extruder_offset": [
		"0x0"
	],
	"gcode_flavor": "marlin2",
	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
	"machine_end_gcode": "G91 ;Relative positioning\nG1 Z5 F720 ;Raise Z\nG1 E-5 F300 ;Retract a bit to protect nozzle\nM104 S0 ;Turn off extruder\nM140 S0 ;Turn off bed\nM107 ;Turn off all fans\nG90 ;Absolute positioning\nG1 X200 Y200 F4800 ;Parking the hotend\nM84 X Y E ;All steppers off but left Z\n",
	"machine_max_acceleration_e": [
		"1000"
	],
	"machine_max_acceleration_extruding": [
		"500"
	],
	"machine_max_acceleration_retracting": [
		"500"
	],
	"machine_max_acceleration_travel": [
		"1800"
	],
	"machine_max_acceleration_x": [
		"1500"
	],
	"machine_max_acceleration_y": [
		"1500"
	],
	"machine_max_acceleration_z": [
		"100"
	],
	"machine_max_jerk_e": [
		"5"
	],
	"machine_max_jerk_x": [
		"12"
	],
	"machine_max_jerk_y": [
		"12"
	],
	"machine_max_jerk_z": [
		"0.4"
	],
	"machine_max_speed_e": [
		"25"
	],
	"machine_max_speed_x": [
		"150"
	],
	"machine_max_speed_y": [
		"150"
	],
	"machine_max_speed_z": [
		"10"
	],
	"machine_min_extruding_rate": [
		"0"
	],
	"machine_min_travel_rate": [
		"0"
	],
	"machine_pause_gcode": "M25 ;pause print",
	"machine_start_gcode": "G21 ;Metric values\nG90 ;Absolute positioning\nM82 ;Set extruder to absolute mode\nM107 ;Start with the fan off\nM140 S[bed_temperature_initial_layer] ; set bed temperature\nM190 S[bed_temperature_initial_layer] ; wait for bed to reach target temperature\nG28 ;Homing the hotend\nG29 ;Auto bed leveling detecting\nM104 S[nozzle_temperature_initial_layer] ; set nozzle temperature\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle to reach target temperature\nG92 E0 ;Reset the extruded length\nG1 F200 E3 ;Extrude 3mm of filament\nG92 E0 ;Reset the extruded length again\nG1 Y2.0 F1200 ;Move y axis to prime\nG1 X150 F6000 ;Move x axis to prime\nG1 Z0.2 F720 ;Move z axis to prime\nG1 X80.0 E8.0 F900 ;Prime line\nG1 X20.0 E10.0 F700 ;Prime line\nG92 E0 ;Reset the extruded length\nG5 ;Enable resume from power failure\nM117 Printing...\n",
	"max_layer_height": [
		"0.32"
	],
	"min_layer_height": [
		"0.08"
	],
	"nozzle_diameter": [
		"0.4"
	],
	"nozzle_type": "stainless_steel",
	"printable_area": [
		"0x0",
		"243x0",
		"243x220",
		"0x220"
	],
	"printable_height": "200",
	"printer_settings_id": "Eryone ER20 common",
	"printer_technology": "FFF",
	"printer_variant": "0.4",
	"purge_in_prime_tower": "1",
	"retract_before_wipe": [
		"0%"
	],
	"retract_length_toolchange": [
		"5"
	],
	"retract_lift_above": [
		"0"
	],
	"retract_lift_below": [
		"200"
	],
	"retract_lift_enforce": [
		"All Surfaces"
	],
	"retract_restart_extra": [
		"0"
	],
	"retract_restart_extra_toolchange": [
		"0"
	],
	"retract_when_changing_layer": [
		"0"
	],
	"retraction_length": [
		"5"
	],
	"retraction_minimum_travel": [
		"1"
	],
	"retraction_speed": [
		"50"
	],
	"scan_first_layer": "0",
	"silent_mode": "0",
	"single_extruder_multi_material": "0",
	"support_air_filtration": "0",
	"support_chamber_temp_control": "0",
	"template_custom_gcode": "",
	"thumbnails": "48x48/PNG, 300x300/PNG",
	"thumbnails_format": "PNG",
	"use_firmware_retraction": "0",
	"use_relative_e_distances": "0",
	"wipe": [
		"1"
	],
	"wipe_distance": [
		"1"
	],
	"z_hop": [
		"0.4"
	],
	"z_hop_types": [
		"Auto Lift"
	]
}