{
    "type": "filament",
    "name": "Generic TPU for AMS @BBL H2C",
    "inherits": "Generic TPU for AMS @base",
    "from": "system",
    "setting_id": "GFSU98_11",
    "instantiation": "true",
    "additional_cooling_fan_speed": [
        "100"
    ],
    "eng_plate_temp": [
        "35"
    ],
    "eng_plate_temp_initial_layer": [
        "35"
    ],
    "fan_cooling_layer_time": [
        "40"
    ],
    "fan_max_speed": [
        "50"
    ],
    "fan_min_speed": [
        "10"
    ],
    "filament_cooling_before_tower": [
        "10",
        "10",
        "10"
    ],
    "filament_flow_ratio": [
        "1",
        "1",
        "1"
    ],
    "filament_max_volumetric_speed": [
        "10.5",
        "10.5",
        "10.5"
    ],
    "filament_ramming_volumetric_speed": [
        "2.63",
        "2.63",
        "2.63"
    ],
    "filament_ramming_volumetric_speed_nc": [
        "2.63",
        "2.63",
        "2.63"
    ],
    "filament_prime_volume": [
        "30"
    ],
    "filament_prime_volume_nc": [
        "30"
    ],
    "filament_pre_cooling_temperature": [
        "200",
        "200",
        "200"
    ],
    "filament_pre_cooling_temperature_nc": [
        "190",
        "190",
        "190"
    ],
    "filament_ramming_travel_time": [
        "20",
        "20",
        "20"
    ],
    "filament_ramming_travel_time_nc": [
        "20",
        "20",
        "20"
    ],
    "filament_change_length": [
        "4"
    ],
    "first_x_layer_fan_speed": [
        "0"
    ],
    "filament_change_length_nc": [
        "4"
    ],
    "filament_preheat_temperature_delta": [
        "20",
        "20",
        "20"
    ],
    "include": [
        "fdm_filament_template_direct_dual_e3d"
    ],
    "nozzle_temperature": [
        "230",
        "230",
        "230"
    ],
    "nozzle_temperature_initial_layer": [
        "230",
        "230",
        "230"
    ],
    "overhang_fan_threshold": [
        "25%"
    ],
    "pre_start_fan_time": [
        "2"
    ],
    "slow_down_layer_time": [
        "10"
    ],
    "slow_down_min_speed": [
        "20",
        "20",
        "20"
    ],
    "compatible_printers": [
        "Bambu Lab H2C 0.6 nozzle",
        "Bambu Lab H2C 0.8 nozzle"
    ],
    "filament_start_gcode": [
        "; filament start gcode\n"
    ],
    "filament_end_gcode": [
        "; filament end gcode \n"
    ]
}