{
    "type": "filament",
    "name": "Bambu PLA Basic @BBL H2C 0.6 nozzle",
    "inherits": "Bambu PLA Basic @base",
    "from": "system",
    "setting_id": "GFSA00_31",
    "instantiation": "true",
    "additional_cooling_fan_speed": [
        "75"
    ],
    "counter_coef_2": [
        "0.0025"
    ],
    "counter_coef_3": [
        "0.014"
    ],
    "counter_limit_min": [
        "0.014"
    ],
    "counter_limit_max": [
        "0.076"
    ],
    "eng_plate_temp": [
        "55"
    ],
    "eng_plate_temp_initial_layer": [
        "55"
    ],
    "fan_max_speed": [
        "80"
    ],
    "fan_min_speed": [
        "60"
    ],
    "filament_cooling_before_tower": [
        "10",
        "10",
        "10"
    ],
    "filament_flow_ratio": [
        "0.99",
        "0.99",
        "0.99"
    ],
    "filament_max_volumetric_speed": [
        "30",
        "40",
        "30"
    ],
    "filament_retraction_length": [
        "0.4",
        "0.4",
        "0.4"
    ],
    "filament_wipe": [
        "1",
        "1",
        "1"
    ],
    "filament_wipe_distance": [
        "1",
        "1",
        "1"
    ],
    "filament_prime_volume_nc": [
        "30"
    ],
    "filament_z_hop_types": [
        "Spiral Lift",
        "Spiral Lift",
        "Spiral Lift"
    ],
    "filament_pre_cooling_temperature_nc": [
        "180",
        "180",
        "180"
    ],
    "filament_ramming_travel_time": [
        "0",
        "0",
        "0"
    ],
    "filament_ramming_travel_time_nc": [
        "1",
        "1",
        "1"
    ],
    "filament_retract_length_nc": [
        "18",
        "18",
        "18"
    ],
    "filament_change_length": [
        "4"
    ],
    "filament_change_length_nc": [
        "4"
    ],
    "first_x_layer_fan_speed": [
        "0"
    ],
    "hole_coef_2": [
        "-0.0028"
    ],
    "hole_coef_3": [
        "0.12"
    ],
    "hole_limit_min": [
        "0.05"
    ],
    "hole_limit_max": [
        "0.12"
    ],
    "filament_preheat_temperature_delta": [
        "20",
        "20",
        "20"
    ],
    "include": [
        "fdm_filament_template_direct_dual_e3d"
    ],
    "nozzle_temperature": [
        "220",
        "220",
        "220"
    ],
    "nozzle_temperature_initial_layer": [
        "220",
        "220",
        "220"
    ],
    "pre_start_fan_time": [
        "2"
    ],
    "supertack_plate_temp": [
        "40"
    ],
    "supertack_plate_temp_initial_layer": [
        "40"
    ],
    "slow_down_min_speed": [
        "20",
        "20",
        "20"
    ],
    "compatible_printers": [
        "Bambu Lab H2C 0.6 nozzle"
    ],
    "filament_start_gcode": [
        "; filament start gcode\n"
    ],
    "filament_end_gcode": [
        "; filament end gcode \n"
    ]
}