{
    "type": "filament",
    "name": "Bambu PET-CF @BBL H2C 0.4 nozzle",
    "inherits": "Bambu PET-CF @base",
    "from": "system",
    "setting_id": "GFST01_08",
    "instantiation": "true",
    "chamber_temperatures": [
        "50"
    ],
    "counter_coef_2": [
        "-0.0004"
    ],
    "counter_coef_3": [
        "-0.0156"
    ],
    "counter_limit_max": [
        "-0.015"
    ],
    "counter_limit_min": [
        "-0.025"
    ],
    "eng_plate_temp": [
        "100"
    ],
    "eng_plate_temp_initial_layer": [
        "100"
    ],
    "fan_cooling_layer_time": [
        "80"
    ],
    "fan_max_speed": [
        "80"
    ],
    "fan_min_speed": [
        "1"
    ],
    "filament_change_length": [
        "4"
    ],
    "filament_change_length_nc": [
        "4"
    ],
    "filament_cooling_before_tower": [
        "10",
        "10",
        "10"
    ],
    "filament_flow_ratio": [
        "0.9555",
        "1",
        "1"
    ],
    "filament_max_volumetric_speed": [
        "5",
        "5",
        "5"
    ],
    "filament_overhang_2_4_speed": [
        "35",
        "50",
        "50"
    ],
    "filament_overhang_3_4_speed": [
        "35",
        "30",
        "30"
    ],
    "filament_pre_cooling_temperature_nc": [
        "230",
        "230",
        "230"
    ],
    "filament_preheat_temperature_delta": [
        "20",
        "20",
        "20"
    ],
    "filament_prime_volume": [
        "30"
    ],
    "filament_prime_volume_nc": [
        "30"
    ],
    "filament_ramming_travel_time": [
        "0",
        "0",
        "0"
    ],
    "filament_ramming_travel_time_nc": [
        "1",
        "1",
        "1"
    ],
    "first_x_layer_fan_speed": [
        "0"
    ],
    "hole_coef_2": [
        "-0.0003"
    ],
    "hole_coef_3": [
        "0.1741"
    ],
    "hole_limit_max": [
        "0.174"
    ],
    "hole_limit_min": [
        "0.167"
    ],
    "include": [
        "fdm_filament_template_direct_dual_e3d"
    ],
    "nozzle_temperature": [
        "270",
        "270",
        "270"
    ],
    "nozzle_temperature_initial_layer": [
        "270",
        "270",
        "270"
    ],
    "overhang_fan_speed": [
        "75"
    ],
    "override_process_overhang_speed": [
        "1",
        "0",
        "0"
    ],
    "slow_down_layer_time": [
        "1"
    ],
    "slow_down_min_speed": [
        "35",
        "10",
        "10"
    ],
    "temperature_vitrification": [
        "150"
    ],
    "compatible_printers": [
        "Bambu Lab H2C 0.4 nozzle"
    ],
    "filament_start_gcode": [
        "; filament start gcode\n"
    ],
    "filament_end_gcode": [
        "; filament end gcode \n"
    ]
}