{
	"type": "filament",
	"name": "Generic PLA SPEEDBENCHY @Sovol Zero",
	"inherits": "fdm_filament_pla",
	"from": "system",
	"setting_id": "MC2InZ7iKDjIGike",
	"filament_id": "OFIUkWYN",
	"instantiation": "true",
	"filament_flow_ratio": [
		"1"
	],
	"filament_max_volumetric_speed": [
		"50"
	],
	"compatible_printers": [
		"Sovol Zero 0.4 nozzle",
		"Sovol Zero 0.4 Hardened Steel nozzle"
	],
	"nozzle_temperature_initial_layer": [
		"245"
	],
	"nozzle_temperature": [
		"225"
	],
	"nozzle_temperature_range_low": [
		"190"
	],
	"nozzle_temperature_range_high": [
		"250"
	],
	"hot_plate_temp": [
		"65"
	],
	"hot_plate_temp_initial_layer": [
		"65"
	],
	"enable_pressure_advance": [
		"1"
	],
	"pressure_advance": [
		"0.032"
	],
	"fan_min_speed": [
		"100"
	],
	"fan_max_speed": [
		"100"
	],
	"fan_cooling_layer_time": [
		"30"
	],
	"full_fan_speed_layer": [
		"3"
	],
	"slow_down_layer_time": [
		"1.7"
	],
	"slow_down_min_speed": [
		"40"
	],
	"overhang_fan_speed": [
		"100"
	],
	"overhang_fan_threshold": [
		"75%"
	],
	"additional_cooling_fan_speed": [
		"100"
	],
	"filament_z_hop": [
		"0"
	],
	"filament_retraction_length": [
		"0.35"
	],
	"filament_retraction_speed": [
		"90"
	],
	"filament_deretraction_speed": [
		"90"
	],
	"filament_retract_before_wipe": [
		"0%"
	],
	"filament_wipe_distance": [
		"2"
	],
	"filament_retract_when_changing_layer": [
		"0"
	],
	"filament_diameter": [
		"1.75"
	],
	"cool_plate_temp": [
		"60"
	],
	"eng_plate_temp": [
		"60"
	],
	"textured_plate_temp": [
		"60"
	],
	"cool_plate_temp_initial_layer": [
		"55"
	],
	"eng_plate_temp_initial_layer": [
		"55"
	],
	"filament_end_gcode": [
		"; filament end gcode \n"
	],
	"filament_start_gcode": [
		"; filament start gcode\n"
	],
	"temperature_vitrification": [
		"100"
	]
}