{
	"type": "filament",
	"name": "Generic PETG @Sovol Zero",
	"renamed_from": "Sovol Zero PETG",
	"inherits": "fdm_filament_pet",
	"from": "system",
	"setting_id": "i4OW2eAtXOKdtVNj",
	"filament_id": "OFYPdQJh",
	"instantiation": "true",
	"filament_flow_ratio": [
		"1.0348"
	],
	"enable_pressure_advance": [
		"1"
	],
	"pressure_advance": [
		"0.046"
	],
	"filament_max_volumetric_speed": [
		"15"
	],
	"nozzle_temperature_initial_layer": [
		"265"
	],
	"nozzle_temperature": [
		"245"
	],
	"nozzle_temperature_range_low": [
		"230"
	],
	"nozzle_temperature_range_high": [
		"280"
	],
	"hot_plate_temp": [
		"85"
	],
	"hot_plate_temp_initial_layer": [
		"85"
	],
	"fan_min_speed": [
		"10"
	],
	"fan_max_speed": [
		"40"
	],
	"fan_cooling_layer_time": [
		"50"
	],
	"full_fan_speed_layer": [
		"3"
	],
	"slow_down_layer_time": [
		"10"
	],
	"slow_down_min_speed": [
		"10"
	],
	"overhang_fan_speed": [
		"70"
	],
	"overhang_fan_threshold": [
		"10%"
	],
	"temperature_vitrification": [
		"60"
	],
	"close_fan_the_first_x_layers": [
		"1"
	],
	"filament_retraction_length": [
		"0.5"
	],
	"filament_z_hop": [
		"0.4"
	],
	"activate_air_filtration": [
		"1"
	],
	"during_print_exhaust_fan_speed": [
		"50"
	],
	"complete_print_exhaust_fan_speed": [
		"50"
	],
	"compatible_printers": [
		"Sovol Zero 0.2 nozzle",
		"Sovol Zero 0.4 nozzle",
		"Sovol Zero 0.6 nozzle",
		"Sovol Zero 0.8 nozzle",
		"Sovol Zero 1.0 nozzle"
	],
	"cool_plate_temp": [
		"85"
	],
	"eng_plate_temp": [
		"85"
	],
	"textured_plate_temp": [
		"85"
	],
	"cool_plate_temp_initial_layer": [
		"85"
	],
	"eng_plate_temp_initial_layer": [
		"85"
	],
	"textured_plate_temp_initial_layer": [
		"85"
	],
	"filament_end_gcode": [
		"; filament end gcode \n"
	],
	"filament_start_gcode": [
		"; filament start gcode\n"
	]
}