{
	"type": "process",
	"name": "0.20 Support W @Snapmaker U1 (0.4 nozzle)",
	"renamed_from": "0.20 Support W Snapmaker U1 (0.4 nozzle);0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle);0.20 Support W Snapmaker U1 (0.4 High Flow nozzle)",
	"inherits": "fdm_process_U1_0.20",
	"from": "system",
	"setting_id": "M9JhI2roLcP4jYks",
	"instantiation": "true",
	"enable_support": "1",
	"support_interface_top_layers": "3",
	"support_top_z_distance": "0.2",
	"support_interface_loop_pattern": "1",
	"support_interface_spacing": "0",
	"support_interface_speed": [
		"80",
		"80",
		"80",
		"80",
		"80",
		"80",
		"80",
		"80"
	],
	"support_filament": "0",
	"support_interface_filament": "0",
	"enable_prime_tower": "1",
	"compatible_printers": [
		"Snapmaker U1 (0.4 nozzle)"
	],
	"ooze_prevention": "1",
	"prime_tower_width": "50",
	"prime_volume": "38",
	"slowdown_for_curled_perimeters": [
		"0",
		"0",
		"0",
		"0",
		"0",
		"0",
		"0",
		"0"
	],
	"standby_temperature_delta": "-150",
	"print_extruder_id": [
		"1",
		"1",
		"2",
		"2",
		"3",
		"3",
		"4",
		"4"
	],
	"print_extruder_variant": [
		"Direct Drive Standard",
		"Direct Drive High Flow",
		"Direct Drive Standard",
		"Direct Drive High Flow",
		"Direct Drive Standard",
		"Direct Drive High Flow",
		"Direct Drive Standard",
		"Direct Drive High Flow"
	],
	"internal_solid_infill_speed": [
		"250",
		"600",
		"250",
		"600",
		"250",
		"600",
		"250",
		"600"
	],
	"inner_wall_speed": [
		"300",
		"600",
		"300",
		"600",
		"300",
		"600",
		"300",
		"600"
	],
	"sparse_infill_speed": [
		"270",
		"600",
		"270",
		"600",
		"270",
		"600",
		"270",
		"600"
	],
	"outer_wall_speed": [
		"200",
		"500",
		"200",
		"500",
		"200",
		"500",
		"200",
		"500"
	]
}