{
	"type": "process",
	"name": "0.20 Strength @Snapmaker U1 (0.4 nozzle)",
	"renamed_from": "0.20 Strength Snapmaker U1 (0.4 nozzle);0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle);0.20 Strength Snapmaker U1 (0.4 High Flow nozzle)",
	"inherits": "fdm_process_U1_0.20",
	"from": "system",
	"setting_id": "bYnMOZxTq83EwIyd",
	"instantiation": "true",
	"description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
	"outer_wall_speed": [
		"60",
		"500",
		"60",
		"500",
		"60",
		"500",
		"60",
		"500"
	],
	"sparse_infill_density": "25%",
	"wall_loops": "6",
	"compatible_printers": [
		"Snapmaker U1 (0.4 nozzle)"
	],
	"ooze_prevention": "1",
	"prime_tower_width": "30",
	"prime_volume": "45",
	"slowdown_for_curled_perimeters": [
		"0",
		"0",
		"0",
		"0",
		"0",
		"0",
		"0",
		"0"
	],
	"standby_temperature_delta": "-150",
	"wipe_tower_filament": "0",
	"prime_tower_brim_width": "5",
	"wipe_tower_cone_angle": "15",
	"wipe_tower_extra_spacing": "120%",
	"enable_arc_fitting": "0",
	"precise_outer_wall": "1",
	"support_type": "tree(auto)",
	"wipe_tower_extra_rib_length": "8",
	"wipe_tower_wall_type": "rib",
	"gap_fill_target": "topbottom",
	"print_extruder_id": [
		"1",
		"1",
		"2",
		"2",
		"3",
		"3",
		"4",
		"4"
	],
	"print_extruder_variant": [
		"Direct Drive Standard",
		"Direct Drive High Flow",
		"Direct Drive Standard",
		"Direct Drive High Flow",
		"Direct Drive Standard",
		"Direct Drive High Flow",
		"Direct Drive Standard",
		"Direct Drive High Flow"
	],
	"internal_solid_infill_speed": [
		"250",
		"600",
		"250",
		"600",
		"250",
		"600",
		"250",
		"600"
	],
	"inner_wall_speed": [
		"300",
		"600",
		"300",
		"600",
		"300",
		"600",
		"300",
		"600"
	],
	"sparse_infill_speed": [
		"270",
		"600",
		"270",
		"600",
		"270",
		"600",
		"270",
		"600"
	]
}