{
	"type": "process",
	"name": "0.10 Standard @Snapmaker U1 (0.2 nozzle)",
	"renamed_from": "0.10 Standard Snapmaker U1 (0.2 nozzle);0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle);0.10 Standard Snapmaker U1 (0.2 High Flow nozzle)",
	"inherits": "fdm_process_U1_0.10_nozzle_0.2",
	"from": "system",
	"setting_id": "SOq962UWv1ml1Mk0",
	"instantiation": "true",
	"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
	"elefant_foot_compensation": "0.15",
	"compatible_printers": [
		"Snapmaker U1 (0.2 nozzle)"
	],
	"enable_arc_fitting": "0",
	"ooze_prevention": "1",
	"precise_outer_wall": "1",
	"preheat_time": "31",
	"prime_tower_brim_width": "6",
	"prime_tower_width": "28",
	"prime_volume": "25",
	"standby_temperature_delta": "-150",
	"support_threshold_angle": "35",
	"support_type": "tree(auto)",
	"wipe_tower_extra_rib_length": "8",
	"wipe_tower_extra_spacing": "120%",
	"wipe_tower_wall_type": "rib",
	"slowdown_for_curled_perimeters": [
		"0",
		"0",
		"0",
		"0",
		"0",
		"0",
		"0",
		"0"
	],
	"print_extruder_id": [
		"1",
		"1",
		"2",
		"2",
		"3",
		"3",
		"4",
		"4"
	],
	"print_extruder_variant": [
		"Direct Drive Standard",
		"Direct Drive High Flow",
		"Direct Drive Standard",
		"Direct Drive High Flow",
		"Direct Drive Standard",
		"Direct Drive High Flow",
		"Direct Drive Standard",
		"Direct Drive High Flow"
	],
	"internal_solid_infill_speed": [
		"150",
		"600",
		"150",
		"600",
		"150",
		"600",
		"150",
		"600"
	],
	"inner_wall_speed": [
		"150",
		"600",
		"150",
		"600",
		"150",
		"600",
		"150",
		"600"
	],
	"sparse_infill_speed": [
		"100",
		"600",
		"100",
		"600",
		"100",
		"600",
		"100",
		"600"
	],
	"outer_wall_speed": [
		"120",
		"500",
		"120",
		"500",
		"120",
		"500",
		"120",
		"500"
	]
}