{
	"type": "filament",
	"name": "Snapmaker PETG Translucent @U1 0.2 nozzle",
	"inherits": "Snapmaker PETG Translucent @U1 base",
	"from": "system",
	"setting_id": "UTpedqYJysaoe3OI",
	"instantiation": "true",
	"compatible_printers": [
		"Snapmaker U1 (0.2 nozzle)"
	],
	"additional_cooling_fan_speed": [
		"20",
		"20"
	],
	"close_fan_the_first_x_layers": [
		"3"
	],
	"complete_print_exhaust_fan_speed": [
		"70",
		"70"
	],
	"during_print_exhaust_fan_speed": [
		"70",
		"70"
	],
	"fan_max_speed": [
		"40",
		"40"
	],
	"fan_min_speed": [
		"20",
		"20"
	],
	"filament_cooling_moves": [
		"4"
	],
	"filament_cost": [
		"25"
	],
	"filament_density": [
		"1.25"
	],
	"filament_flow_ratio": [
		"0.98",
		"0.98"
	],
	"filament_loading_speed": [
		"28"
	],
	"filament_max_volumetric_speed": [
		"1",
		"1"
	],
	"filament_minimal_purge_on_wipe_tower": [
		"15",
		"15"
	],
	"filament_multitool_ramming": [
		"1",
		"1"
	],
	"filament_multitool_ramming_flow": [
		"5",
		"5"
	],
	"filament_multitool_ramming_volume": [
		"5",
		"5"
	],
	"filament_retract_length_toolchange": [
		"10",
		"10"
	],
	"filament_retraction_length": [
		"1",
		"1"
	],
	"filament_retraction_minimum_travel": [
		"nil",
		"nil"
	],
	"filament_retraction_speed": [
		"50",
		"50"
	],
	"filament_unloading_speed": [
		"90"
	],
	"filament_unloading_speed_start": [
		"100"
	],
	"filament_z_hop_types": [
		"Slope Lift",
		"Slope Lift"
	],
	"hot_plate_temp": [
		"80"
	],
	"nozzle_temperature": [
		"245",
		"245"
	],
	"nozzle_temperature_initial_layer": [
		"250",
		"250"
	],
	"nozzle_temperature_range_low": [
		"230",
		"230"
	],
	"overhang_fan_threshold": [
		"10%"
	],
	"pressure_advance": [
		"0.23",
		"0.2875"
	],
	"slow_down_min_speed": [
		"10"
	],
	"textured_plate_temp": [
		"80"
	],
	"textured_plate_temp_initial_layer": [
		"80"
	],
	"enable_pressure_advance": [
		"0",
		"1"
	],
	"filament_extruder_variant": [
		"Direct Drive Standard",
		"Direct Drive High Flow"
	]
}