{
	"type": "process",
	"name": "0.20mm SPEED @MK4 MMU3 HF0.4",
	"inherits": "fdm_process_mk4_mmu3",
	"from": "system",
	"setting_id": "PlmSFc1gykexEIfc",
	"instantiation": "true",
	"bridge_speed": [
		"50"
	],
	"default_acceleration": [
		"4000"
	],
	"outer_wall_acceleration": [
		"4000"
	],
	"outer_wall_line_width": "0.45",
	"outer_wall_speed": [
		"200"
	],
	"line_width": "0.45",
	"initial_layer_line_width": "0.5",
	"initial_layer_infill_speed": [
		"100"
	],
	"gap_infill_speed": [
		"120"
	],
	"resolution": "0.008",
	"infill_anchor": "2",
	"infill_anchor_max": "12",
	"sparse_infill_line_width": "0.45",
	"sparse_infill_speed": [
		"250"
	],
	"overhang_3_4_speed": [
		"25"
	],
	"overhang_2_4_speed": [
		"30"
	],
	"overhang_1_4_speed": [
		"70%"
	],
	"inner_wall_acceleration": [
		"4000"
	],
	"inner_wall_line_width": "0.45",
	"inner_wall_speed": [
		"250"
	],
	"raft_contact_distance": "0.15",
	"small_perimeter_speed": [
		"170"
	],
	"internal_solid_infill_acceleration": [
		"4000"
	],
	"internal_solid_infill_line_width": "0.45",
	"internal_solid_infill_speed": [
		"250"
	],
	"support_line_width": "0.4",
	"support_interface_spacing": "0.2",
	"support_interface_speed": [
		"50%"
	],
	"support_speed": [
		"120"
	],
	"top_surface_line_width": "0.42",
	"top_surface_acceleration": [
		"2000"
	],
	"top_surface_speed": [
		"100"
	],
	"top_shell_layers": "5",
	"top_shell_thickness": "0.7",
	"bottom_shell_thickness": "0.5",
	"wipe_tower_extra_flow": "250%",
	"compatible_printers": [
		"Prusa MK4 MMU3 HF0.4 nozzle"
	]
}