{
	"type": "filament",
	"name": "Prusament PETG @XL",
	"renamed_from": "Prusament PETG XL;Prusament PETG @XL 5T;Prusament PETG XL 5T",
	"inherits": "Prusament PETG @base",
	"from": "system",
	"setting_id": "vPPD8EkKFy5j8pg5",
	"instantiation": "true",
	"nozzle_temperature": "250",
	"hot_plate_temp_initial_layer": "80",
	"hot_plate_temp": "80",
	"full_fan_speed_layer": "5",
	"slow_down_min_speed": "15",
	"filament_flow_ratio": [
		"1"
	],
	"filament_max_volumetric_speed": [
		"9.5"
	],
	"slow_down_layer_time": [
		"9"
	],
	"fan_max_speed": [
		"50"
	],
	"fan_min_speed": [
		"30"
	],
	"overhang_fan_speed": [
		"50"
	],
	"close_fan_the_first_x_layers": [
		"3"
	],
	"filament_loading_speed_start": "50",
	"filament_loading_speed": "10",
	"filament_unloading_speed_start": "100",
	"filament_unloading_speed": "100",
	"filament_cooling_moves": "3",
	"filament_cooling_initial_speed": "5",
	"filament_cooling_final_speed": "2.5",
	"filament_retract_lift_below": "1.5",
	"filament_wipe": "1",
	"filament_retract_before_wipe": "20%",
	"filament_start_gcode": [
		"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.053{elsif nozzle_diameter[0]==0.5}0.042{elsif nozzle_diameter[0]==0.6}0.032{elsif nozzle_diameter[0]==0.8}0.018{elsif nozzle_diameter[0]==0.25}0.18{elsif nozzle_diameter[0]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
	],
	"compatible_printers": [
		"Prusa XL 0.25 nozzle",
		"Prusa XL 0.3 nozzle",
		"Prusa XL 0.4 nozzle",
		"Prusa XL 0.5 nozzle",
		"Prusa XL 0.6 nozzle",
		"Prusa XL 0.8 nozzle",
		"Prusa XL 5T 0.25 nozzle",
		"Prusa XL 5T 0.3 nozzle",
		"Prusa XL 5T 0.4 nozzle",
		"Prusa XL 5T 0.5 nozzle",
		"Prusa XL 5T 0.6 nozzle",
		"Prusa XL 5T 0.8 nozzle"
	],
	"filament_multitool_ramming": [
		"1"
	],
	"filament_multitool_ramming_flow": [
		"40"
	],
	"filament_multitool_ramming_volume": [
		"10"
	],
	"filament_stamping_distance": [
		"45"
	],
	"filament_stamping_loading_speed": [
		"29"
	],
	"nozzle_temperature_initial_layer": [
		"240"
	]
}