{
	"type": "filament",
	"name": "Prusament PC Blend @XL",
	"renamed_from": "Prusament PC Blend XL;Prusament PC Blend @XL 5T;Prusament PC Blend XL 5T",
	"inherits": "fdm_filament_pc",
	"from": "system",
	"setting_id": "DLTlxt04GREtOiec",
	"filament_id": "OFvDbkFq",
	"instantiation": "true",
	"filament_vendor": [
		"Prusa Polymers"
	],
	"nozzle_temperature": "275",
	"hot_plate_temp_initial_layer": "100",
	"hot_plate_temp": "105",
	"filament_flow_ratio": [
		"1"
	],
	"fan_max_speed": [
		"10"
	],
	"fan_min_speed": [
		"10"
	],
	"overhang_fan_speed": [
		"30"
	],
	"close_fan_the_first_x_layers": [
		"4"
	],
	"slow_down_min_speed": [
		"15"
	],
	"slow_down_layer_time": [
		"20"
	],
	"filament_max_volumetric_speed": [
		"9"
	],
	"filament_loading_speed_start": "19",
	"filament_loading_speed": "14",
	"filament_unloading_speed_start": "100",
	"filament_unloading_speed": "20",
	"filament_cooling_moves": "5",
	"filament_cooling_initial_speed": "10",
	"filament_cooling_final_speed": "50",
	"filament_retract_lift_below": "1.5",
	"filament_start_gcode": [
		"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"
	],
	"compatible_printers": [
		"Prusa XL 0.25 nozzle",
		"Prusa XL 0.3 nozzle",
		"Prusa XL 0.4 nozzle",
		"Prusa XL 0.5 nozzle",
		"Prusa XL 0.6 nozzle",
		"Prusa XL 0.8 nozzle",
		"Prusa XL 5T 0.25 nozzle",
		"Prusa XL 5T 0.3 nozzle",
		"Prusa XL 5T 0.4 nozzle",
		"Prusa XL 5T 0.5 nozzle",
		"Prusa XL 5T 0.6 nozzle",
		"Prusa XL 5T 0.8 nozzle"
	],
	"filament_multitool_ramming": [
		"1"
	],
	"filament_multitool_ramming_flow": [
		"40"
	],
	"filament_multitool_ramming_volume": [
		"5"
	],
	"filament_stamping_distance": [
		"45"
	],
	"filament_stamping_loading_speed": [
		"29"
	],
	"nozzle_temperature_initial_layer": [
		"275"
	]
}