{
	"type": "filament",
	"name": "Prusament ASA @XL",
	"renamed_from": "Prusament ASA XL;Prusament ASA @XL 5T;Prusament ASA XL 5T",
	"inherits": "fdm_filament_asa",
	"from": "system",
	"setting_id": "RaEoFoZdXkkOz9yh",
	"filament_id": "OFmFwUWM",
	"instantiation": "true",
	"filament_vendor": [
		"Prusa Polymers"
	],
	"nozzle_temperature": "260",
	"hot_plate_temp_initial_layer": "100",
	"hot_plate_temp": "105",
	"filament_flow_ratio": [
		"1"
	],
	"fan_max_speed": [
		"10"
	],
	"fan_min_speed": [
		"10"
	],
	"overhang_fan_speed": [
		"30"
	],
	"close_fan_the_first_x_layers": [
		"4"
	],
	"slow_down_min_speed": [
		"15"
	],
	"slow_down_layer_time": [
		"15"
	],
	"filament_max_volumetric_speed": [
		"12"
	],
	"filament_loading_speed_start": "19",
	"filament_loading_speed": "14",
	"filament_unloading_speed_start": "100",
	"filament_unloading_speed": "20",
	"filament_cooling_moves": "5",
	"filament_cooling_initial_speed": "10",
	"filament_cooling_final_speed": "50",
	"filament_retract_lift_below": "1.5",
	"filament_start_gcode": [
		"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
	],
	"compatible_printers": [
		"Prusa XL 0.25 nozzle",
		"Prusa XL 0.3 nozzle",
		"Prusa XL 0.4 nozzle",
		"Prusa XL 0.5 nozzle",
		"Prusa XL 0.6 nozzle",
		"Prusa XL 0.8 nozzle",
		"Prusa XL 5T 0.25 nozzle",
		"Prusa XL 5T 0.3 nozzle",
		"Prusa XL 5T 0.4 nozzle",
		"Prusa XL 5T 0.5 nozzle",
		"Prusa XL 5T 0.6 nozzle",
		"Prusa XL 5T 0.8 nozzle"
	],
	"filament_multitool_ramming": [
		"1"
	],
	"filament_multitool_ramming_flow": [
		"40"
	],
	"filament_multitool_ramming_volume": [
		"5"
	],
	"filament_stamping_distance": [
		"45"
	],
	"filament_stamping_loading_speed": [
		"29"
	],
	"nozzle_temperature_initial_layer": [
		"260"
	]
}