{
	"type": "filament",
	"name": "Generic TPU @Prusa CORE One",
	"renamed_from": "Prusa Generic TPU @CORE One;Prusa Generic TPU CORE One;Generic TPU @Prusa CORE One MMU3;Generic TPU @MMU3",
	"inherits": "Generic TPU @Prusa base",
	"from": "system",
	"setting_id": "jsXqf9CeaXCvsrWM",
	"instantiation": "true",
	"chamber_temperature": [
		"30"
	],
	"close_fan_the_first_x_layers": [
		"3"
	],
	"compatible_printers": [
		"Prusa CORE One 0.25 nozzle",
		"Prusa CORE One 0.3 nozzle",
		"Prusa CORE One 0.4 nozzle",
		"Prusa CORE One 0.5 nozzle",
		"Prusa CORE One HF 0.4 nozzle",
		"Prusa CORE One HF 0.5 nozzle",
		"Prusa CORE One MMU3 0.4 nozzle",
		"Prusa CORE One MMU3 0.25 nozzle",
		"Prusa CORE One MMU3 0.3 nozzle",
		"Prusa CORE One MMU3 0.6 nozzle"
	],
	"fan_max_speed": [
		"50"
	],
	"fan_min_speed": [
		"30"
	],
	"filament_cost": [
		"82"
	],
	"filament_density": [
		"1.22"
	],
	"filament_deretraction_speed": [
		"20"
	],
	"filament_end_gcode": [
		"; Filament-specific end gcode"
	],
	"filament_flow_ratio": [
		"1.08"
	],
	"filament_max_volumetric_speed": [
		"2.5"
	],
	"filament_retraction_length": [
		"2.5"
	],
	"filament_retraction_minimum_travel": [
		"2"
	],
	"filament_retraction_speed": [
		"60"
	],
	"filament_start_gcode": [
		"M900 K0 ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
	],
	"filament_wipe": [
		"0"
	],
	"filament_z_hop": [
		"0"
	],
	"hot_plate_temp": [
		"50"
	],
	"hot_plate_temp_initial_layer": [
		"50"
	],
	"idle_temperature": [
		"150"
	],
	"nozzle_temperature": [
		"230"
	],
	"nozzle_temperature_initial_layer": [
		"230"
	],
	"overhang_fan_speed": [
		"70"
	],
	"slow_down_layer_time": [
		"10"
	],
	"slow_down_min_speed": [
		"15"
	],
	"eng_plate_temp_initial_layer": [
		"60"
	],
	"eng_plate_temp": [
		"60"
	],
	"cool_plate_temp": [
		"60"
	],
	"nozzle_temperature_range_low": [
		"190"
	],
	"temperature_vitrification": [
		"100"
	],
	"cool_plate_temp_initial_layer": [
		"60"
	],
	"nozzle_temperature_range_high": [
		"240"
	]
}