{
	"type": "filament",
	"name": "Generic PLA @Prusa CORE One",
	"renamed_from": "Prusa Generic PLA @CORE One;Prusa Generic PLA CORE One;Generic PLA @Prusa CORE One MMU3;Generic PLA @MMU3",
	"inherits": "Generic PLA @Prusa base",
	"from": "system",
	"setting_id": "r2i4c7DsYXYIMVCX",
	"instantiation": "true",
	"include": [
		"fdm_filament_template_nextruder_pla"
	],
	"chamber_temperature": [
		"20"
	],
	"compatible_printers": [
		"Prusa CORE One 0.25 nozzle",
		"Prusa CORE One 0.3 nozzle",
		"Prusa CORE One 0.4 nozzle",
		"Prusa CORE One 0.5 nozzle",
		"Prusa CORE One L 0.4 nozzle",
		"Prusa CORE One MMU3 0.4 nozzle",
		"Prusa CORE One MMU3 0.25 nozzle",
		"Prusa CORE One MMU3 0.3 nozzle"
	],
	"fan_cooling_layer_time": [
		"40"
	],
	"fan_min_speed": [
		"85"
	],
	"filament_cost": [
		"25.4"
	],
	"filament_end_gcode": [
		"; Filament-specific end gcode"
	],
	"filament_max_volumetric_speed": [
		"15"
	],
	"filament_start_gcode": [
		"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{elsif nozzle_diameter[filament_extruder_id]==0.35}0.06{elsif nozzle_diameter[filament_extruder_id]==0.6}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|COREONE).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
	],
	"filament_z_hop": [
		"0.6"
	],
	"filament_z_hop_types": [
		"Slope Lift"
	],
	"full_fan_speed_layer": [
		"3"
	],
	"idle_temperature": [
		"170"
	],
	"nozzle_temperature_initial_layer": [
		"230"
	],
	"slow_down_layer_time": [
		"8"
	],
	"slow_down_min_speed": [
		"20"
	]
}