{
    "type": "process",
    "name": "0.25mm PP Draft @Pragostroj 0.5",
    "inherits": "process_common_kinarb",
    "from": "system",
    "setting_id": "uotzhmSKiQosuOpK",
    "instantiation": "true",
    "layer_height": "0.25",
    "initial_layer_print_height": "0.25",
    "line_width": "0.5",
    "outer_wall_line_width": "0.5",
    "inner_wall_line_width": "0.5",
    "internal_solid_infill_line_width": "0.5",
    "top_surface_line_width": "0.5",
    "sparse_infill_line_width": "0.5",
    "support_line_width": "0.5",
    "initial_layer_line_width": "0.65",
    "brim_type": "no_brim",
    "skirt_loops": "2",
    "wall_sequence": "outer wall/inner wall",
    "sparse_infill_density": "5%",
    "gap_fill_target": "everywhere",
    "enable_arc_fitting": "1",
    "ooze_prevention": "1",
    "small_perimeter_speed": "30%",
    "small_perimeter_threshold": "5",
    "slow_down_layers": "3",
    "default_acceleration": "3000",
    "outer_wall_acceleration": "1000",
    "inner_wall_acceleration": "3000",
    "top_surface_acceleration": "2000",
    "travel_acceleration": "2000",
    "default_jerk": "5",
    "initial_layer_jerk": "5",
    "infill_jerk": "5",
    "inner_wall_jerk": "5",
    "outer_wall_jerk": "5",
    "top_surface_jerk": "5",
    "travel_jerk": "5",
    "initial_layer_speed": "30",
    "initial_layer_infill_speed": "30",
    "outer_wall_speed": "50",
    "inner_wall_speed": "60",
    "internal_solid_infill_speed": "50",
    "sparse_infill_speed": "60",
    "top_surface_speed": "50",
    "gap_infill_speed": "50",
    "travel_speed": "300",
    "enable_support": "1",
    "support_threshold_angle": "45",
    "support_speed": "50",
    "support_interface_speed": "30",
    "support_top_z_distance": "0.25",
    "support_bottom_z_distance": "0.25",
    "support_object_xy_distance": "0.6",
    "support_filament": "1",
    "support_interface_filament": "1",
    "support_interface_pattern": "concentric",
    "support_interface_spacing": "0",
    "support_bottom_interface_spacing": "0",
    "support_interface_top_layers": "3",
    "support_interface_bottom_layers": "3",
    "independent_support_layer_height": "0",
    "raft_layers": "4",
    "raft_contact_distance": "0.25",
    "compatible_printers": [
        "KINARB 1HB 0.5 nozzle",
        "KINARB 2HB 0.5 nozzle"
    ]
}