{
    "type": "machine",
    "name": "kinarb_2hb_machine_common",
    "inherits": "kinarb_machine_common",
    "from": "system",
    "instantiation": "false",
    "extruder_offset": [
        "0x0",
        "0x0"
    ],
    "extruder_colour": [
        "#FCE94F",
        "#3465A4"
    ],
    "retraction_length": [
        "1.6",
        "1.6"
    ],
    "retract_length_toolchange": [
        "2",
        "2"
    ],
    "retraction_speed": [
        "45",
        "45"
    ],
    "deretraction_speed": [
        "45",
        "45"
    ],
    "retraction_minimum_travel": [
        "1",
        "1"
    ],
    "retract_before_wipe": [
        "70%",
        "70%"
    ],
    "retract_when_changing_layer": [
        "0",
        "0"
    ],
    "retract_restart_extra": [
        "0",
        "0"
    ],
    "retract_restart_extra_toolchange": [
        "0",
        "0"
    ],
    "wipe": [
        "0",
        "0"
    ],
    "wipe_distance": [
        "1",
        "1"
    ],
    "z_hop": [
        "0.2",
        "0.2"
    ],
    "z_hop_types": [
        "Spiral Lift",
        "Spiral Lift"
    ],
    "retract_lift_above": [
        "0",
        "0"
    ],
    "retract_lift_below": [
        "0",
        "0"
    ],
    "retract_lift_enforce": [
        "All Surfaces",
        "All Surfaces"
    ],
    "retraction_distances_when_cut": [
        "18",
        "18"
    ],
    "long_retractions_when_cut": [
        "0",
        "0"
    ],
    "travel_slope": [
        "3",
        "3"
    ],
    "single_extruder_multi_material": [
        "0"
    ],
    "printable_area": [
        "0x0",
        "540x0",
        "540x450",
        "0x450"
    ],
    "extruder_printable_area": [
        "0x0,540x0,540x450,0x450",
        "0x0,540x0,540x450,0x450"
    ],
    "extruder_printable_height": [
        "500",
        "500"
    ],
    "nozzle_count": "2",
    "machine_tool_change_time": "5",
    "machine_start_gcode": "; --- DUAL-HEAD START G-CODE (placeholder, please verify with your RRF config) ---\nM104 S[nozzle_temperature_initial_layer_0] T0 ; preheat T0 (no tool select)\nM104 S[nozzle_temperature_initial_layer_1] T1 ; preheat T1 (no tool select)\nM116 ; wait for all temps\nG1 Z10 F6000 ;Move the platform down 10mm\nG1 X60 Y10 F10000\nG1 Z0.25 F6000 ;Move the platform down 0,25mm\nG92 E0\nG1 X200 E20 F1000\nG1 X450 E40 F1000\nG92 E0",
    "change_filament_gcode": "; --- TOOL CHANGE (placeholder) ---\nT[next_extruder]\nG92 E0",
    "extruders_count": "2",
    "parking_pos_retraction": "0",
    "cooling_tube_length": "0",
    "cooling_tube_retraction": "0",
    "extra_loading_move": "0",
    "enable_filament_ramming": "0",
    "high_current_on_filament_swap": "0",
    "purge_in_prime_tower": "0"
}