{
	"type": "machine",
	"name": "Creality CR-20 Pro 0.4 nozzle",
	"inherits": "fdm_creality_common",
	"from": "system",
	"setting_id": "CQgwdo8OEISIMGmT",
	"instantiation": "true",
	"printer_model": "Creality CR-20 Pro",
	"printer_structure": "i3",
	"adaptive_bed_mesh_margin": "0",
	"auxiliary_fan": "0",
	"bbl_use_printhost": "0",
	"bed_exclude_area": "0x0",
	"bed_mesh_max": "99999,99999",
	"bed_mesh_min": "-99999,-99999",
	"bed_mesh_probe_distance": "50,50",
	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
	"best_object_pos": "0.5,0.5",
	"cooling_tube_length": "5",
	"cooling_tube_retraction": "91.5",
	"default_print_profile": "0.20mm Standard @Creality CR-20 Pro 0.4 nozzle",
	"disable_m73": "0",
	"emit_machine_limits_to_gcode": "1",
	"enable_filament_ramming": "0",
	"enable_long_retraction_when_cut": "0",
	"extra_loading_move": "-2",
	"extruder_clearance_height_to_lid": "250",
	"extruder_clearance_height_to_rod": "35",
	"extruder_clearance_radius": "60",
	"fan_kickstart": "0",
	"fan_speedup_overhangs": "1",
	"fan_speedup_time": "0",
	"gcode_flavor": "marlin",
	"high_current_on_filament_swap": "0",
	"host_type": "octoprint",
	"machine_LED_light_exist": "0",
	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
	"machine_load_filament_time": "0",
	"machine_max_acceleration_e": ["5000", "5000"],
	"machine_max_acceleration_extruding": ["500", "500"],
	"machine_max_acceleration_retracting": ["500", "500"],
	"machine_max_acceleration_travel": ["500", "500"],
	"machine_max_acceleration_x": ["500", "500"],
	"machine_max_acceleration_y": ["500", "500"],
	"machine_max_acceleration_z": ["100", "100"],
	"machine_max_jerk_e": ["5", "5"],
	"machine_max_jerk_x": ["10", "10"],
	"machine_max_jerk_y": ["10", "10"],
	"machine_max_jerk_z": ["0.4", "0.4"],
	"machine_max_speed_e": ["50", "50"],
	"machine_max_speed_x": ["500", "500"],
	"machine_max_speed_y": ["500", "500"],
	"machine_max_speed_z": ["10", "10"],
	"machine_min_extruding_rate": "0,0",
	"machine_min_travel_rate": "0,0",
	"machine_pause_gcode": "M25",
	"machine_platform_motion_enable": "0",
	"machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp  \nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp  \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize  \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize  \nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0  ;Reset Extruder\nG1 E-5.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800",
	"machine_tool_change_time": "0",
	"machine_unload_filament_time": "0",
	"manual_filament_change": "0",
	"nozzle_height": "4",
	"nozzle_hrc": "0",
	"nozzle_type": "brass",
	"nozzle_volume": "0",
	"parking_pos_retraction": "92",
	"pellet_modded_printer": "0",
	"preferred_orientation": "0",
	"prime_tower_position_type": "Middle Upper",
	"printable_area": "0x0,220x0,220x220,0x220",
	"printable_height": "250",
	"printer_technology": "FFF",
	"printer_variant": "0.4",
	"printhost_authorization_type": "key",
	"printhost_ssl_ignore_revoke": "0",
	"purge_in_prime_tower": "0",
	"scan_first_layer": "0",
	"single_extruder_multi_material": "1",
	"support_air_filtration": "0",
	"support_chamber_temp_control": "0",
	"support_multi_bed_types": "1",
	"thumbnails": "300x300/PNG",
	"thumbnails_format": "PNG",
	"time_cost": "0",
	"use_firmware_retraction": "0",
	"use_relative_e_distances": "1",
	"z_offset": "0",
	"default_filament_profile": [
		"Generic PLA @CR-20 Pro-all"
	],
	"deretraction_speed": "40",
	"extruder_colour": "#FCE94F",
	"extruder_offset": "0x0",
	"long_retractions_when_cut": "0",
	"max_layer_height": "0.2",
	"min_layer_height": "0.08",
	"nozzle_diameter": [
		"0.4"
	],
	"retract_before_wipe": "90%",
	"retract_length_toolchange": "0",
	"retract_lift_above": "0",
	"retract_lift_below": "0",
	"retract_lift_enforce": "All Surfaces",
	"retract_restart_extra": "0",
	"retract_restart_extra_toolchange": "0",
	"retract_when_changing_layer": "1",
	"retraction_distances_when_cut": "18",
	"retraction_length": "5",
	"retraction_minimum_travel": "2",
	"retraction_speed": "50",
	"travel_slope": "3",
	"wipe": "1",
	"wipe_distance": "2",
	"z_hop": "0.4",
	"z_hop_types": "Normal Lift"
}