{
    "type": "filament",
    "name": "Bambu TPU 85A @BBL H2S",
    "inherits": "Bambu TPU 85A @base",
    "from": "system",
    "setting_id": "GFSU04_07",
    "instantiation": "true",
    "additional_cooling_fan_speed": [
        "100",
        "100",
        "100"
    ],
    "eng_plate_temp": [
        "35"
    ],
    "eng_plate_temp_initial_layer": [
        "35"
    ],
    "filament_cooling_before_tower": [
        "10",
        "10",
        "10"
    ],
    "filament_deretraction_speed": [
        "10",
        "10",
        "10"
    ],
    "filament_flow_ratio": [
        "1",
        "1",
        "1"
    ],
    "filament_max_volumetric_speed": [
        "3",
        "3",
        "3"
    ],
    "filament_ramming_volumetric_speed": [
        "0.55",
        "0.55",
        "0.55"
    ],
    "filament_retraction_length": [
        "2",
        "2",
        "2"
    ],
    "filament_retraction_speed": [
        "10",
        "10",
        "10"
    ],
    "filament_wipe": [
        "1",
        "1",
        "1"
    ],
    "filament_wipe_distance": [
        "1",
        "1",
        "1"
    ],
    "filament_z_hop_types": [
        "Spiral Lift",
        "Spiral Lift",
        "Spiral Lift"
    ],
    "filament_ramming_travel_time": [
        "0",
        "0",
        "0"
    ],
    "include": [
        "fdm_filament_template_direct_dual_e3d"
    ],
    "long_retractions_when_ec": [
        "0",
        "0",
        "0"
    ],
    "nozzle_temperature": [
        "225",
        "225",
        "225"
    ],
    "nozzle_temperature_initial_layer": [
        "225",
        "225",
        "225"
    ],
    "pre_start_fan_time": [
        "2"
    ],
    "retraction_distances_when_ec": [
        "0",
        "0",
        "0"
    ],
    "slow_down_min_speed": [
        "30",
        "30",
        "30"
    ],
    "volumetric_speed_coefficients": [
        "-72.1736 -8.8086 10.6201 29.6592 9.9286 -3.3920",
        "-72.1736 -8.8086 10.6201 29.6592 9.9286 -3.3920",
        "-72.1736 -8.8086 10.6201 29.6592 9.9286 -3.3920"
    ],
    "compatible_printers": [
        "Bambu Lab H2S 0.4 nozzle"
    ],
    "filament_start_gcode": [
        "; filament start gcode\n"
    ],
    "filament_end_gcode": [
        "; filament end gcode \n"
    ]
}