{
	"type": "process",
	"name": "0.20mm Solid @LH Stinger",
	"inherits": "fdm_process_lh_common",
	"from": "system",
	"setting_id": "LHS_P_solid",
	"instantiation": "true",
	"compatible_printers": [
		"LH Stinger 0.4 nozzle",
		"LH Stinger MMU 0.4 nozzle"
	],
	"accel_to_decel_factor": "90%",
	"bottom_shell_layers": "2",
	"bridge_acceleration": "5000",
	"bridge_density": "97%",
	"brim_object_gap": "0.04",
	"default_acceleration": "15000",
	"default_jerk": "10",
	"detect_narrow_internal_solid_infill": "0",
	"enable_support": "1",
	"ensure_vertical_shell_thickness": "none",
	"filter_out_gap_fill": "2",
	"gap_infill_speed": "200",
	"infill_jerk": "10",
	"infill_wall_overlap": "18%",
	"initial_layer_jerk": "10",
	"initial_layer_line_width": "0.45",
	"initial_layer_print_height": "0.25",
	"inner_wall_acceleration": "15000",
	"inner_wall_jerk": "10",
	"internal_solid_infill_acceleration": "15000",
	"outer_wall_jerk": "10",
	"outer_wall_speed": "200",
	"overhang_1_4_speed": "60%",
	"overhang_2_4_speed": "40",
	"overhang_3_4_speed": "20",
	"print_extruder_id": [
		"1"
	],
	"print_extruder_variant": [
		"Direct Drive Standard"
	],
	"raft_first_layer_density": "60%",
	"small_perimeter_threshold": "7",
	"sparse_infill_acceleration": "15000",
	"sparse_infill_density": "98%",
	"sparse_infill_pattern": "rectilinear",
	"support_interface_speed": "200",
	"support_speed": "200",
	"top_shell_layers": "2",
	"top_shell_thickness": "0.6",
	"top_solid_infill_flow_ratio": "0.96",
	"top_surface_acceleration": "5000",
	"top_surface_jerk": "10",
	"top_surface_speed": "150",
	"inner_wall_speed": "200",
	"sparse_infill_speed": "200",
	"internal_solid_infill_speed": "200",
	"internal_bridge_density": "95%",
	"internal_bridge_speed": "150",
	"gap_fill_target": "nowhere",
	"wall_loops": "3",
	"travel_jerk": "10"
}