{
	"type": "process",
	"name": "0.20mm Quiet @LH Stinger",
	"inherits": "fdm_process_lh_common",
	"from": "system",
	"setting_id": "LHS_P_quiet",
	"instantiation": "true",
	"compatible_printers": [
		"LH Stinger 0.4 nozzle",
		"LH Stinger MMU 0.4 nozzle"
	],
	"accel_to_decel_factor": "75%",
	"bridge_acceleration": "5000",
	"bridge_speed": "40",
	"default_acceleration": "10000",
	"default_jerk": "5",
	"filter_out_gap_fill": "10",
	"gap_infill_speed": "200",
	"infill_jerk": "5",
	"infill_wall_overlap": "10%",
	"initial_layer_infill_speed": "100",
	"initial_layer_jerk": "5",
	"initial_layer_travel_speed": "180",
	"inner_wall_acceleration": "10000",
	"inner_wall_jerk": "5",
	"internal_bridge_speed": "60",
	"internal_solid_infill_acceleration": "10000",
	"outer_wall_acceleration": "5000",
	"outer_wall_jerk": "5",
	"outer_wall_speed": "200",
	"print_extruder_id": [
		"1"
	],
	"print_extruder_variant": [
		"Direct Drive Standard"
	],
	"raft_first_layer_density": "60%",
	"sparse_infill_acceleration": "10000",
	"sparse_infill_pattern": "rectilinear",
	"support_interface_speed": "170",
	"support_speed": "170",
	"top_surface_jerk": "5",
	"top_surface_speed": "200",
	"inner_wall_speed": "200",
	"sparse_infill_speed": "200",
	"internal_solid_infill_speed": "200",
	"travel_acceleration": "10000",
	"travel_jerk": "5",
	"sparse_infill_density": "15%",
	"accel_to_decel_enable": "1",
	"gap_fill_target": "nowhere",
	"travel_speed": "200"
}