{
	"type": "process",
	"name": "0.20mm MMU @LH Stinger",
	"inherits": "fdm_process_lh_common",
	"from": "system",
	"setting_id": "LHS_P_mmu",
	"instantiation": "true",
	"compatible_printers": [
		"LH Stinger MMU 0.4 nozzle"
	],
	"bottom_surface_pattern": "monotonicline",
	"bridge_acceleration": "7000",
	"default_jerk": "10",
	"detect_narrow_internal_solid_infill": "0",
	"filter_out_gap_fill": "1",
	"gap_infill_speed": "220",
	"infill_jerk": "10",
	"infill_wall_overlap": "8%",
	"initial_layer_infill_speed": "120",
	"initial_layer_jerk": "10",
	"initial_layer_line_width": "0.4",
	"inner_wall_acceleration": "15000",
	"inner_wall_jerk": "10",
	"inner_wall_speed": "220",
	"internal_solid_infill_acceleration": "15000",
	"internal_solid_infill_speed": "220",
	"only_one_wall_first_layer": "1",
	"outer_wall_jerk": "10",
	"outer_wall_speed": "220",
	"prime_tower_width": "80",
	"print_extruder_id": [
		"1"
	],
	"print_extruder_variant": [
		"Direct Drive Standard"
	],
	"raft_first_layer_density": "50%",
	"small_perimeter_threshold": "2",
	"sparse_infill_acceleration": "15000",
	"sparse_infill_pattern": "rectilinear",
	"sparse_infill_speed": "220",
	"top_bottom_infill_wall_overlap": "8%",
	"top_surface_jerk": "10",
	"top_surface_speed": "150",
	"wall_generator": "arachne",
	"sparse_infill_density": "15%",
	"travel_jerk": "10"
}