{
  "type": "process",
  "name": "0.20mm Standard @Goofoo TurboM",
  "inherits": "fdm_process_klipper_common",
  "from": "system",
  "setting_id": "LVXxUtAcYGCY6irA",
  "instantiation": "true",
  "compatible_printers": [
    "Goofoo TurboM 0.4 nozzle"
  ],
  "layer_height": "0.2",
  "bridge_acceleration": "2000",
  "bridge_speed": "60",
  "brim_type": "no_brim",
  "default_acceleration": "10000",
  "enable_support": "1",
  "exclude_object": "0",
  "gap_infill_speed": "200",
  "infill_anchor": "600%",
  "infill_combination": "1",
  "infill_wall_overlap": "15%",
  "initial_layer_acceleration": "1000",
  "initial_layer_line_width": "0.45",
  "initial_layer_speed": "60",
  "inner_wall_acceleration": "3000",
  "inner_wall_line_width": "0.42",
  "inner_wall_speed": "150",
  "internal_solid_infill_acceleration": "3000",
  "internal_solid_infill_line_width": "0.42",
  "internal_solid_infill_speed": "150",
  "line_width": "0.42",
  "min_skirt_length": "0",
  "minimum_sparse_infill_area": "70",
  "only_one_wall_top": "1",
  "outer_wall_acceleration": "2500",
  "outer_wall_line_width": "0.42",
  "outer_wall_speed": "100",
  "reduce_crossing_wall": "1",
  "skirt_distance": "6",
  "skirt_height": "1",
  "skirt_loops": "4",
  "small_perimeter_speed": "200",
  "sparse_infill_acceleration": "3000",
  "sparse_infill_line_width": "0.42",
  "sparse_infill_pattern": "grid",
  "sparse_infill_speed": "150",
  "support_base_pattern": "rectilinear",
  "support_interface_bottom_layers": "-1",
  "support_interface_pattern": "rectilinear",
  "support_interface_spacing": "0",
  "support_interface_speed": "100",
  "support_interface_top_layers": "3",
  "support_line_width": "0.35",
  "support_object_xy_distance": "0.21",
  "support_speed": "100",
  "thick_bridges": "1",
  "top_shell_layers": "6",
  "top_shell_thickness": "0",
  "top_surface_acceleration": "2500",
  "top_surface_line_width": "0.42",
  "top_surface_speed": "150",
  "travel_acceleration": "10000",
  "travel_speed": "200",
  "wall_generator": "classic",
  "wall_loops": "2",
  "wall_sequence": "outer wall/inner wall"
}