{
  "type": "process",
  "name": "0.20mm Standard @Goofoo GP1",
  "inherits": "fdm_process_klipper_common",
  "from": "system",
  "setting_id": "zrscQBUxp6L7BlQ9",
  "instantiation": "true",
  "compatible_printers": [
    "Goofoo GP1 0.4 nozzle"
  ],
  "layer_height": "0.2",
  "accel_to_decel_enable": "0",
  "bridge_acceleration": "100%",
  "bridge_speed": "100",
  "brim_type": "no_brim",
  "gap_infill_speed": "250",
  "initial_layer_acceleration": "1000",
  "initial_layer_infill_speed": "100",
  "initial_layer_speed": "70",
  "inner_wall_speed": "250",
  "internal_bridge_speed": "200%",
  "internal_solid_infill_speed": "250",
  "outer_wall_acceleration": "5000",
  "outer_wall_speed": "100",
  "overhang_4_4_speed": "0",
  "reduce_crossing_wall": "1",
  "skirt_distance": "6",
  "skirt_height": "1",
  "skirt_loops": "1",
  "sparse_infill_pattern": "grid",
  "sparse_infill_speed": "250",
  "top_surface_acceleration": "5000",
  "top_surface_speed": "200",
  "travel_acceleration": "5000"
}