{
	"bed_exclude_area": [
		"0x0"
	],
	"instantiation": "false",
	"type": "machine",
	"deretraction_speed": [
		"30",
		"30"
	],
	"enable_filament_ramming": "1",
	"extruder_offset": [
		"0x0",
		"0x0"
	],
	"extruders_count": [
		"2"
	],
	"inherits": "fdm_machine_common",
	"machine_end_gcode": "G92 E0\nTURN_OFF_HEATERS\nG28 X Y\nM18\nM107",
	"machine_start_gcode": "M83  ; Use relative extrusion distances\nG28  ; Home all axes\nM140 S{first_layer_bed_temperature[initial_tool]}  ; Start heating bed\nM190 S{first_layer_bed_temperature[initial_tool]}  ; Wait for bed to reach temperature\n\nT{initial_tool}\n\n\n; ---------------------------\n; HEAT THE USED TOOL\n; ---------------------------\n{if is_extruder_used[initial_tool]}\nM104 T{initial_tool} S{first_layer_temperature[initial_tool]}  ; Preheat active extruder to first layer temperature\nM109 T{initial_tool} S{first_layer_temperature[initial_tool]}  ; Wait for active extruder to reach temperature\n{endif}\n\nG1 F18000\nG4 S0\nG92 E0",
	"machine_tool_change_time": [
		"90"
	],
	"name": "fdm_re3D_common",
	"printer_technology": "FFF",
	"retract_before_wipe": [
		"70%",
		"70%"
	],
	"retract_length_toolchange": [
		"12",
		"12"
	],
	"retract_restart_extra": [
		"0",
		"0"
	],
	"retract_restart_extra_toolchange": [
		"-0.08",
		"-0.08"
	],
	"retract_when_changing_layer": [
		"1",
		"1"
	],
	"retraction_length": [
		"1.0",
		"1.0"
	],
	"retraction_minimum_travel": [
		"1",
		"1"
	],
	"retraction_speed": [
		"30",
		"30"
	],
	"single_extruder_multi_material": "0",
	"wipe": [
		"1",
		"1"
	],
	"z_hop": [
		"0",
		"0"
	],
	"z_hop_types": [
		"Normal Lift",
		"Normal Lift"
	],
	"bed_temperature_formula": "by_first_filament",
	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
	"best_object_pos": "0.5,0.5",
	"cooling_tube_length": "0",
	"cooling_tube_retraction": "0",
	"default_nozzle_volume_type": [
		"Standard",
		"Standard"
	],
	"disable_m73": "0",
	"extruder_colour": [
		"#FCE94F",
		"#FCE94F"
	],
	"extruder_type": [
		"Direct Drive",
		"Direct Drive"
	],
	"extruder_variant_list": [
		"Direct Drive Standard",
		"Direct Drive Standard"
	],
	"fan_kickstart": "0",
	"fan_speedup_overhangs": "1",
	"fan_speedup_time": "0",
	"host_type": "octoprint",
	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
	"machine_pause_gcode": "PAUSE",
	"machine_unload_filament_time": "0",
	"manual_filament_change": "0",
	"master_extruder_id": "1",
	"physical_extruder_map": [
		"0"
	],
	"preferred_orientation": "0",
	"printer_extruder_id": [
		"1",
		"2"
	],
	"printer_extruder_variant": [
		"Direct Drive Standard",
		"Direct Drive Standard"
	],
	"support_air_filtration": "0",
	"support_chamber_temp_control": "0",
	"thumbnails": "48x48/PNG, 300x300/PNG",
	"thumbnails_format": "PNG",
	"travel_slope": [
		"3",
		"3"
	],
	"use_firmware_retraction": "0",
	"use_relative_e_distances": "1",
	"wipe_distance": [
		"1",
		"1"
	],
	"wipe_tower_type": "type2",
	"z_offset": "0"
}