{
    "type": "process",
    "name": "0.06 Standard @Snapmaker U1 (0.2 nozzle)",
    "inherits": "fdm_process_U1_0.2_common",
    "from": "system",
    "instantiation": "true",
    "layer_height": "0.06",
    "initial_layer_print_height": "0.1",
    "wall_loops": "4",
    "bottom_shell_layers": "5",
    "top_shell_layers": "7",
    "bridge_flow": "1",
    "initial_layer_speed": "40",
    "initial_layer_infill_speed": "70",
    "sparse_infill_speed": "100",
    "top_surface_speed": "150",
    "support_top_z_distance": "0.06",
    "support_bottom_z_distance": "0.06",
    "setting_id": "997RaiNHd2YhpaRB",
    "description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
    "elefant_foot_compensation": "0.15",
    "smooth_coefficient": "150",
    "overhang_totally_speed": "50",
    "compatible_printers": [
        "Snapmaker U1 (0.2 nozzle)"
    ],
    "enable_arc_fitting": "0",
    "ooze_prevention": "1",
    "precise_outer_wall": "0",
    "prime_tower_brim_width": "5",
    "prime_tower_width": "30",
    "prime_volume": "13.5",
    "slowdown_for_curled_perimeters": "0",
    "standby_temperature_delta": "-150",
    "support_type": "tree(auto)",
    "wipe_tower_extra_rib_length": "8",
    "wipe_tower_extra_spacing": "120%",
    "wipe_tower_wall_type": "rib"
}