{
	"type": "machine",
	"name": "fdm_elegoo_common",
	"from": "system",
	"instantiation": "false",
	"inherits": "fdm_machine_common",
	"gcode_flavor": "marlin",
	"printer_technology": "FFF",
	"nozzle_diameter": [
		"0.4"
	],
	"printer_variant": "0.4",
	"printable_area": [
		"0x0",
		"235x0",
		"235x235",
		"0x235"
	],
	"auxiliary_fan": "0",
	"bed_exclude_area": [
		"0x0"
	],
	"default_filament_profile": [
		"Generic PLA @Elegoo"
	],
	"default_print_profile": "",
	"extruder_colour": [
		"#018001"
	],
	"machine_max_acceleration_e": [
		"1000",
		"1000"
	],
	"machine_max_acceleration_extruding": [
		"1000",
		"1000"
	],
	"machine_max_acceleration_retracting": [
		"1000",
		"1000"
	],
	"machine_max_acceleration_travel": [
		"1000",
		"1000"
	],
	"machine_max_acceleration_x": [
		"1000",
		"1000"
	],
	"machine_max_acceleration_y": [
		"1000",
		"1000"
	],
	"machine_max_acceleration_z": [
		"100",
		"100"
	],
	"machine_max_speed_e": [
		"70",
		"70"
	],
	"machine_max_speed_x": [
		"300",
		"300"
	],
	"machine_max_speed_y": [
		"300",
		"300"
	],
	"machine_max_speed_z": [
		"20",
		"20"
	],
	"machine_max_jerk_e": [
		"2.5",
		"2.5"
	],
	"machine_max_jerk_x": [
		"9",
		"9"
	],
	"machine_max_jerk_y": [
		"9",
		"9"
	],
	"machine_max_jerk_z": [
		"3",
		"3"
	],
	"machine_min_extruding_rate": [
		"0",
		"0"
	],
	"machine_min_travel_rate": [
		"0",
		"0"
	],
	"printable_height": "250",
	"retract_lift_below": [
		"249"
	],
	"extruder_clearance_max_radius": "68",
	"extruder_clearance_height_to_rod": "34",
	"extruder_clearance_height_to_lid": "34",
	"nozzle_volume": "90",
	"best_object_pos": "0.5x0.5",
	"retraction_minimum_travel": [
		"0.8"
	],
	"retract_before_wipe": [
		"0%"
	],
	"retract_when_changing_layer": [
		"1"
	],
	"wipe_distance": [
		"1.2"
	],
	"retraction_length": [
		"5"
	],
	"retract_length_toolchange": [
		"2"
	],
	"z_hop": [
		"0.4"
	],
	"retraction_speed": [
		"60"
	],
	"deretraction_speed": [
		"60"
	],
	"z_hop_types": [
		"Auto Lift"
	],
	"thumbnails": [
		"320x320",
		"160x160"
	],
	"thumbnails_format": "PNG",
	"nozzle_type": "brass",
	"machine_end_gcode": "G90 ;Absolute positionning\nM83 ; extruder relative mode\nG1 X10 Y{print_bed_max[1]*0.8} Z{min(max_layer_z+100, printable_height)} E-8 F{travel_speed*60} ; Move print head up\nG1 Z{min(max_layer_z+100, printable_height-2)} F600\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM84 ;Disable all steppers",
	"silent_mode": "0",
	"single_extruder_multi_material": "1",
	"change_filament_gcode": "",
	"machine_pause_gcode": "M600",
	"wipe": [
		"1"
	],
	"machine_start_gcode": "\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0\n",
	"layer_change_gcode": ";LAYER:{layer_num+1}\n",
	"scan_first_layer": "0"
}