{
    "type": "filament",
    "name": "SUNLU PLA+ 2.0 @BBL X1",
    "inherits": "SUNLU PLA+ 2.0 @base",
    "from": "system",
    "setting_id": "GFSNLS04_00",
    "instantiation": "true",
    "filament_flow_ratio": [
        "1.0",
        "1.0"
    ],
    "filament_long_retractions_when_cut": [
        "1",
        "1"
    ],
    "filament_max_volumetric_speed": [
        "22",
        "22"
    ],
    "filament_retraction_distances_when_cut": [
        "18",
        "18"
    ],
    "filament_ramming_travel_time": [
        "0",
        "0"
    ],
    "include": [
        "fdm_filament_template_direct_dual"
    ],
    "long_retractions_when_ec": [
        "0",
        "0"
    ],
    "nozzle_temperature": [
        "220",
        "220"
    ],
    "nozzle_temperature_initial_layer": [
        "220",
        "220"
    ],
    "retraction_distances_when_ec": [
        "0",
        "0"
    ],
    "slow_down_layer_time": [
        "10"
    ],
    "slow_down_min_speed": [
        "20",
        "20"
    ],
    "compatible_printers": [
        "Bambu Lab X1 0.4 nozzle",
        "Bambu Lab X1 0.6 nozzle",
        "Bambu Lab X1 0.8 nozzle"
    ],
    "filament_start_gcode": [
        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
    ]
}