{
    "type": "filament",
    "name": "Bambu PETG HF @BBL H2S",
    "inherits": "Bambu PETG HF @base",
    "from": "system",
    "setting_id": "GFSG02_10",
    "instantiation": "true",
    "counter_coef_2": [
        "0.0058"
    ],
    "counter_coef_3": [
        "0.0107"
    ],
    "counter_limit_min": [
        "0.01"
    ],
    "counter_limit_max": [
        "0.15"
    ],
    "fan_cooling_layer_time": [
        "20"
    ],
    "fan_max_speed": [
        "50"
    ],
    "fan_min_speed": [
        "20"
    ],
    "filament_change_length": [
        "4"
    ],
    "filament_cooling_before_tower": [
        "10",
        "10",
        "10"
    ],
    "filament_tower_ironing_area": [
        "8"
    ],
    "filament_max_volumetric_speed": [
        "25",
        "40",
        "25"
    ],
    "filament_retraction_length": [
        "0.4",
        "0.4",
        "0.4"
    ],
    "filament_wipe": [
        "1",
        "1",
        "1"
    ],
    "filament_wipe_distance": [
        "1",
        "1",
        "1"
    ],
    "filament_z_hop_types": [
        "Spiral Lift",
        "Spiral Lift",
        "Spiral Lift"
    ],
    "filament_ramming_travel_time": [
        "0",
        "0",
        "0"
    ],
    "hole_coef_2": [
        "-0.0042"
    ],
    "hole_coef_3": [
        "0.2006"
    ],
    "hole_limit_min": [
        "0.09"
    ],
    "hole_limit_max": [
        "0.2"
    ],
    "include": [
        "fdm_filament_template_direct_dual_e3d"
    ],
    "long_retractions_when_ec": [
        "0",
        "0",
        "0"
    ],
    "nozzle_temperature": [
        "245",
        "245",
        "245"
    ],
    "nozzle_temperature_initial_layer": [
        "245",
        "245",
        "245"
    ],
    "overhang_fan_speed": [
        "100"
    ],
    "pre_start_fan_time": [
        "2"
    ],
    "retraction_distances_when_ec": [
        "0",
        "0",
        "0"
    ],
    "supertack_plate_temp": [
        "60"
    ],
    "supertack_plate_temp_initial_layer": [
        "60"
    ],
    "slow_down_layer_time": [
        "10"
    ],
    "slow_down_min_speed": [
        "20",
        "20",
        "20"
    ],
    "compatible_printers": [
        "Bambu Lab H2S 0.4 nozzle"
    ],
    "filament_start_gcode": [
        "; filament start gcode\n"
    ],
    "filament_end_gcode": [
        "; filament end gcode \n"
    ]
}