{
    "type": "filament",
    "name": "Bambu PAHT-CF @BBL X2D 0.4 nozzle",
    "inherits": "Bambu PAHT-CF @base",
    "from": "system",
    "setting_id": "GFSN04_04",
    "instantiation": "true",
    "chamber_temperatures": [
        "60"
    ],
    "counter_coef_2": [
        "0.002"
    ],
    "counter_coef_3": [
        "-0.055"
    ],
    "counter_limit_max": [
        "-0.005"
    ],
    "counter_limit_min": [
        "-0.055"
    ],
    "fan_max_speed": [
        "45"
    ],
    "fan_min_speed": [
        "25"
    ],
    "filament_cooling_before_tower": [
        "10",
        "10",
        "10",
        "10",
        "10",
        "10"
    ],
    "filament_flow_ratio": [
        "0.96",
        "0.96",
        "0.96",
        "0.96",
        "0.96",
        "0.96"
    ],
    "filament_max_volumetric_speed": [
        "8",
        "8",
        "8",
        "8",
        "8",
        "8"
    ],
    "filament_ramming_travel_time": [
        "0",
        "0",
        "0",
        "0",
        "0",
        "0"
    ],
    "filament_tower_interface_print_temp": [
        "290"
    ],
    "hole_coef_2": [
        "0.0009"
    ],
    "hole_coef_3": [
        "0.1686"
    ],
    "hole_limit_max": [
        "0.19"
    ],
    "hole_limit_min": [
        "0.1686"
    ],
    "include": [
        "fdm_filament_template_direct_bowden_e3d"
    ],
    "nozzle_temperature": [
        "290",
        "290",
        "290",
        "290",
        "290",
        "290"
    ],
    "nozzle_temperature_initial_layer": [
        "290",
        "290",
        "290",
        "290",
        "290",
        "290"
    ],
    "overhang_fan_speed": [
        "60"
    ],
    "retraction_distances_when_ec": [
        "3",
        "3",
        "3",
        "4",
        "4",
        "4"
    ],
    "slow_down_min_speed": [
        "20",
        "20",
        "20",
        "20",
        "20",
        "20"
    ],
    "compatible_printers": [
        "Bambu Lab X2D 0.4 nozzle"
    ],
    "filament_start_gcode": [
        "; filament start gcode\n"
    ]
}