{
	"type": "process",
	"name": "0.14mm Detail Strength @LH Stinger",
	"inherits": "fdm_process_lh_common",
	"from": "system",
	"setting_id": "LHS_P_detail_strength",
	"instantiation": "true",
	"compatible_printers": [
		"LH Stinger 0.4 nozzle",
		"LH Stinger MMU 0.4 nozzle"
	],
	"bottom_shell_layers": "6",
	"bottom_shell_thickness": "0.8",
	"bridge_acceleration": "7500",
	"bridge_flow": "1.2",
	"brim_width": "3",
	"default_acceleration": "15000",
	"default_jerk": "10",
	"gap_infill_speed": "200",
	"infill_anchor": "1000",
	"infill_anchor_max": "1000",
	"infill_jerk": "10",
	"initial_layer_infill_speed": "90",
	"initial_layer_jerk": "10",
	"initial_layer_travel_speed": "250",
	"inner_wall_acceleration": "10000",
	"inner_wall_speed": "200",
	"inner_wall_jerk": "10",
	"internal_solid_infill_acceleration": "15000",
	"internal_solid_infill_speed": "200",
	"layer_height": "0.14",
	"max_travel_detour_distance": "50",
	"outer_wall_acceleration": "7500",
	"outer_wall_jerk": "10",
	"outer_wall_speed": "200",
	"print_extruder_id": [
		"1"
	],
	"print_extruder_variant": [
		"Direct Drive Standard"
	],
	"reduce_crossing_wall": "1",
	"skirt_loops": "2",
	"slow_down_layers": "2",
	"small_perimeter_speed": "75%",
	"small_perimeter_threshold": "3",
	"sparse_infill_acceleration": "15000",
	"sparse_infill_speed": "200",
	"sparse_infill_density": "40%",
	"sparse_infill_pattern": "gyroid",
	"support_base_pattern_spacing": "1.5",
	"support_bottom_interface_spacing": "0.3",
	"support_bottom_z_distance": "0.15",
	"support_interface_speed": "300",
	"support_speed": "200",
	"support_type": "normal(manual)",
	"top_shell_layers": "7",
	"top_shell_thickness": "1",
	"top_surface_acceleration": "7500",
	"top_surface_jerk": "10",
	"top_surface_speed": "200",
	"travel_jerk": "10",
	"wall_generator": "arachne",
	"wall_sequence": "inner wall/outer wall",
	"top_bottom_infill_wall_overlap": "25%",
	"wall_loops": "4"
}