{
	"type": "process",
	"setting_id": "GP010",
	"name": "0.30mm Standard @X-Max 4 0.6 nozzle",
	"from": "system",
	"instantiation": "true",
	"inherits": "fdm_process_n_common",
	"bridge_flow": "1",
	"bridge_speed": [
		"30"
	],
	"default_acceleration": [
		"10000"
	],
	"elefant_foot_compensation": "0.15",
	"enable_arc_fitting": "0",
	"gap_infill_speed": [
		"50"
	],
	"initial_layer_infill_speed": [
		"55"
	],
	"initial_layer_line_width": "0.62",
	"initial_layer_print_height": "0.3",
	"initial_layer_speed": [
		"35"
	],
	"inner_wall_acceleration": [
		"5000"
	],
	"inner_wall_line_width": "0.62",
	"inner_wall_speed": [
		"150"
	],
	"internal_solid_infill_line_width": "0.62",
	"internal_solid_infill_speed": [
		"150"
	],
	"layer_height": "0.3",
	"line_width": "0.62",
	"outer_wall_acceleration": [
		"3000"
	],
	"outer_wall_line_width": "0.62",
	"outer_wall_speed": [
		"120"
	],
	"overhang_3_4_speed": [
		"15"
	],
	"skin_infill_line_width": "0.62",
	"skeleton_infill_line_width": "0.62",
	"small_perimeter_threshold": [
		"4"
	],
	"smooth_coefficient": "4",
	"sparse_infill_line_width": "0.62",
	"sparse_infill_speed": [
		"100"
	],
	"support_line_width": "0.62",
	"top_surface_line_width": "0.62",
	"top_surface_speed": [
		"150"
	],
	"travel_speed": [
		"1000"
	],
	"compatible_printers": [
		"Qidi X-Max 4 0.6 nozzle"
	]
}