{
	"type": "process",
	"setting_id": "u9PNexqDf7jWUnnH",
	"name": "0.2 Fine",
	"renamed_from": "0.2mm Fine @re3D fdm 0.4",
	"from": "system",
	"inherits": "fdm_process_re3D_common",
	"instantiation": "true",
	"compatible_printers": [
		"re3D Gigabot 4 0.4 nozzle",
		"re3D Gigabot 4 XLT 0.4 nozzle",
		"re3D Terabot 4 0.4 nozzle"
	],
	"layer_height": "0.2",
	"initial_layer_print_height": "0.4",
	"line_width": "0.44",
	"outer_wall_line_width": "0.44",
	"inner_wall_line_width": "0.44",
	"initial_layer_line_width": "0.6",
	"sparse_infill_line_width": "0.48",
	"internal_solid_infill_line_width": "0.48",
	"top_surface_line_width": "0.44",
	"support_line_width": "0.48",
	"support_top_z_distance": "0.2",
	"support_bottom_z_distance": "0.2",
	"outer_wall_speed": "60",
  	"initial_layer_speed": "50",
  	"gap_infill_speed": "60",
  	"sparse_infill_speed": "80",
  	"inner_wall_speed": "80",
  	"internal_solid_infill_speed": "80",
  	"support_interface_speed": "30",
  	"support_speed": "90",
  	"top_surface_speed": "50",
  	"travel_speed": "300",
  	"top_surface_acceleration": "2500",
  	"initial_layer_acceleration": "1000",
  	"travel_acceleration": "5000",
  	"inner_wall_acceleration": "5000",
  	"ironing_speed": "25",
  	"overhang_1_4_speed": "0",
  	"overhang_2_4_speed": "50",
  	"overhang_3_4_speed": "30",
  	"overhang_4_4_speed": "10",
  	"initial_layer_infill_speed": "50",
  	"outer_wall_acceleration": "2500",
  	"bridge_acceleration": "3500",
  	"sparse_infill_acceleration": "5000",
  	"internal_solid_infill_acceleration": "5000",
  	"initial_layer_travel_speed": "100%",
  	"small_perimeter_speed": "50%",
	"filename_format": "{input_filename_base}_{\"E\"}{initial_tool}_{filament_type[initial_tool]}_{print_time}.gcode"
}