{
	"type": "filament",
	"name": "Generic PLA @BabyBelt Pro",
	"inherits": "Generic PLA @System",
	"from": "system",
	"setting_id": "24PpcnhVx9v5f4fD",
	"instantiation": "true",
	"compatible_printers": [
		"BabyBelt Pro 0.4 nozzle"
	],
	"filament_type": [
		"PLA"
	],
	"filament_vendor": [
		"Generic"
	],
	"filament_settings_id": [
		"Generic PLA @BabyBelt Pro"
	],
	"filament_diameter": [
		"1.75"
	],
	"filament_density": [
		"1.24"
	],
	"filament_flow_ratio": [
		"0.98"
	],
	"filament_cost": [
		"20"
	],
	"filament_max_volumetric_speed": [
		"12"
	],
	"nozzle_temperature": [
		"215"
	],
	"nozzle_temperature_initial_layer": [
		"220"
	],
	"nozzle_temperature_range_low": [
		"190"
	],
	"nozzle_temperature_range_high": [
		"240"
	],
	"temperature_vitrification": [
		"45"
	],
	"hot_plate_temp": [
		"75"
	],
	"hot_plate_temp_initial_layer": [
		"75"
	],
	"cool_plate_temp": [
		"75"
	],
	"cool_plate_temp_initial_layer": [
		"75"
	],
	"textured_plate_temp": [
		"75"
	],
	"textured_plate_temp_initial_layer": [
		"75"
	],
	"fan_min_speed": [
		"100"
	],
	"fan_max_speed": [
		"100"
	],
	"overhang_fan_threshold": [
		"50%"
	],
	"overhang_fan_speed": [
		"100"
	],
	"close_fan_the_first_x_layers": [
		"3"
	],
	"full_fan_speed_layer": [
		"8"
	],
	"slow_down_min_speed": [
		"20"
	],
	"slow_down_layer_time": [
		"4"
	],
	"fan_cooling_layer_time": [
		"100"
	],
	"reduce_fan_stop_start_freq": [
		"1"
	],
	"filament_retraction_length": [
		"1.5"
	],
	"filament_retraction_speed": [
		"35"
	],
	"filament_deretraction_speed": [
		"30"
	],
	"filament_z_hop": [
		"0.4"
	],
	"filament_start_gcode": [
		"; Generic PLA @BabyBelt Pro — belt PLA, bed 75C"
	]
}