{
	"type": "machine",
	"name": "fdm_belt_common",
	"inherits": "fdm_klipper_common",
	"from": "system",
	"instantiation": "false",
	"gcode_flavor": "klipper",
	"single_extruder_multi_material": "0",
	"default_filament_profile": [
		"Generic PLA @System"
	],
	"default_print_profile": "0.20mm Standard @System",
	"max_layer_height": [
		"0.32"
	],
	"min_layer_height": [
		"0.08"
	],
	"deretraction_speed": [
		"30"
	],
	"extruder_colour": [
		"#FCE94F"
	],
	"extruder_offset": [
		"0x0"
	],
	"long_retractions_when_cut": [
		"0"
	],
	"nozzle_diameter": [
		"0.4"
	],
	"retract_before_wipe": [
		"70%"
	],
	"retract_length_toolchange": [
		"2"
	],
	"retract_lift_above": [
		"0"
	],
	"retract_lift_below": [
		"0"
	],
	"retract_lift_enforce": [
		"All Surfaces"
	],
	"retract_restart_extra": [
		"0"
	],
	"retract_restart_extra_toolchange": [
		"0"
	],
	"retract_when_changing_layer": [
		"1"
	],
	"retraction_distances_when_cut": [
		"18"
	],
	"retraction_length": [
		"0.8"
	],
	"retraction_minimum_travel": [
		"1"
	],
	"retraction_speed": [
		"30"
	],
	"travel_slope": [
		"3"
	],
	"wipe": [
		"1"
	],
	"wipe_distance": [
		"1"
	],
	"z_hop": [
		"0.4"
	],
	"z_hop_types": [
		"Normal Lift"
	],
	"gcode_remap_x": "rev_x",
	"gcode_remap_y": "pos_z",
	"gcode_remap_z": "pos_y",
	"printer_extruder_id": [
		"1"
	],
	"belt_printer": "1",
	"belt_slice_rotation": "x",
	"belt_slice_rotation_angle": "45",
	"belt_slice_rotation_global": "1",
	"build_plate_tilt_x": "45",
	"purge_in_prime_tower": "0",
	"scan_first_layer": "0",
	"auxiliary_fan": "0"
}