{
	"type": "filament",
	"name": "fdm_filament_pps",
	"inherits": "fdm_filament_common",
	"from": "system",
	"instantiation": "false",
	"chamber_temperatures": [
		"60"
	],
	"cool_plate_temp": [
		"0"
	],
	"cool_plate_temp_initial_layer": [
		"0"
	],
	"eng_plate_temp": [
		"110"
	],
	"eng_plate_temp_initial_layer": [
		"110"
	],
	"fan_cooling_layer_time": [
		"5"
	],
	"fan_max_speed": [
		"50"
	],
	"fan_min_speed": [
		"0"
	],
	"filament_density": [
		"1.36"
	],
	"filament_flow_ratio": [
		"0.96"
	],
	"filament_max_volumetric_speed": [
		"4"
	],
	"filament_type": [
		"PPS"
	],
	"filament_adhesiveness_category": [
		"801"
	],
    "filament_dev_chamber_drying_bed_temperature": [
        "100"
    ],
    "filament_dev_ams_drying_time": [
        "12",
        "12",
        "12",
        "12"
    ],
    "filament_dev_ams_drying_ams_limitations": [],
    "filament_dev_ams_drying_heat_distortion_temperature": [
        "165"
    ],
    "filament_dev_drying_cooling_temperature": [
        "150"
    ],
    "filament_dev_ams_drying_temperature": [
        "65",
        "85",
        "65",
        "85"
    ],
    "filament_dev_drying_softening_temperature": [
        "150"
    ],
	"hot_plate_temp": [
		"110"
	],
	"hot_plate_temp_initial_layer": [
		"110"
	],
	"nozzle_temperature": [
		"320"
	],
	"nozzle_temperature_initial_layer": [
		"320"
	],
	"nozzle_temperature_range_high": [
		"340"
	],
	"nozzle_temperature_range_low": [
		"300"
	],
	"overhang_fan_speed": [
		"30"
	],
	"overhang_fan_threshold": [
		"0%"
	],
	"slow_down_layer_time": [
		"2"
	],
	"supertack_plate_temp": [
		"0"
	],
	"supertack_plate_temp_initial_layer": [
		"0"
	],
	"temperature_vitrification": [
		"125"
	],
	"textured_plate_temp": [
		"110"
	],
	"textured_plate_temp_initial_layer": [
		"110"
	],
	"filament_end_gcode": [
		"; filament end gcode \n\n"
	]
}