{
	"type": "filament",
	"name": "Bambu TPU 90A @BBL H2DP 0.8 nozzle",
	"inherits": "Bambu TPU 90A @base",
	"from": "system",
	"setting_id": "GFSU03_27",
	"instantiation": "true",
	"additional_cooling_fan_speed": [
		"100"
	],
	"eng_plate_temp": [
		"35"
	],
	"eng_plate_temp_initial_layer": [
		"35"
	],
	"filament_adaptive_volumetric_speed": [
		"0",
		"0"
	],
	"filament_cooling_before_tower": [
		"10",
		"10"
	],
	"filament_density": [
		"1.22"
	],
	"filament_deretraction_speed": [
		"25",
		"25"
	],
	"filament_extruder_variant": [
		"Direct Drive Standard",
		"Direct Drive High Flow"
	],
	"filament_flow_ratio": [
		"1.05",
		"1.05"
	],
	"filament_flush_temp": [
		"0",
		"0"
	],
	"filament_flush_volumetric_speed": [
		"0",
		"0"
	],
	"filament_long_retractions_when_cut": [
		"nil",
		"nil"
	],
	"filament_max_volumetric_speed": [
		"2.8",
		"2.8"
	],
	"filament_pre_cooling_temperature": [
		"195",
		"195"
	],
	"filament_pre_cooling_temperature_nc": [
		"0",
		"0"
	],
	"filament_preheat_temperature_delta": [
		"10",
		"10"
	],
	"filament_ramming_travel_time": [
		"20",
		"20"
	],
	"filament_ramming_travel_time_nc": [
		"0",
		"0"
	],
	"filament_ramming_volumetric_speed": [
		"0.7",
		"0.7"
	],
	"filament_ramming_volumetric_speed_nc": [
		"-1",
		"-1"
	],
	"filament_retract_before_wipe": [
		"nil",
		"nil"
	],
	"filament_retract_length_nc": [
		"14",
		"14"
	],
	"filament_retract_restart_extra": [
		"nil",
		"nil"
	],
	"filament_retract_when_changing_layer": [
		"nil",
		"nil"
	],
	"filament_retraction_distances_when_cut": [
		"nil",
		"nil"
	],
	"filament_retraction_length": [
		"0.2",
		"0.2"
	],
	"filament_retraction_minimum_travel": [
		"nil",
		"nil"
	],
	"filament_retraction_speed": [
		"10",
		"10"
	],
	"filament_wipe": [
		"nil",
		"nil"
	],
	"filament_wipe_distance": [
		"nil",
		"nil"
	],
	"filament_z_hop": [
		"nil",
		"nil"
	],
	"filament_z_hop_types": [
		"Spiral Lift",
		"Spiral Lift"
	],
	"impact_strength_z": [
		"88.7"
	],
	"long_retractions_when_ec": [
		"1",
		"1"
	],
	"nozzle_temperature": [
		"220",
		"220"
	],
	"nozzle_temperature_initial_layer": [
		"220",
		"220"
	],
	"nozzle_temperature_range_high": [
		"250"
	],
	"retraction_distances_when_ec": [
		"0",
		"0"
	],
	"slow_down_min_speed": [
		"25",
		"25"
	],
	"volumetric_speed_coefficients": [
		"0 0 0 0 0 0",
		"0 0 0 0 0 0"
	],
	"compatible_printers": [
		"Bambu Lab H2D Pro 0.8 nozzle"
	],
	"filament_start_gcode": [
		"; filament start gcode\n"
	],
	"filament_end_gcode": [
		"; filament end gcode \n"
	]
}