{
	"type": "machine",
	"name": "fgf_re3D_common",
	"from": "system",
	"instantiation": "false",
	"inherits": "fdm_machine_common",
	"gcode_flavor": "klipper",
	"machine_max_acceleration_e": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_extruding": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_retracting": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_travel": [
		"20000",
		"5000"
	],
	"machine_max_acceleration_x": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_y": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_z": [
		"2000",
		"2000"
	],
	"machine_max_speed_e": [
		"60",
		"60"
	],
	"machine_max_speed_x": [
		"500",
		"500"
	],
	"machine_max_speed_y": [
		"500",
		"500"
	],
	"machine_max_speed_z": [
		"20",
		"20"
	],
	"machine_max_jerk_e": [
		"2.5",
		"2.5"
	],
	"machine_max_jerk_x": [
		"9",
		"9"
	],
	"machine_max_jerk_y": [
		"9",
		"9"
	],
	"machine_max_jerk_z": [
		"0.2",
		"0.2"
	],
	"machine_min_extruding_rate": [
		"0",
		"0"
	],
	"machine_min_travel_rate": [
		"0",
		"0"
	],
	"max_layer_height": [
		"2.25"
	],
	"min_layer_height": [
		"0.3"
	],
	"extruder_clearance_radius": "70",
	"printer_settings_id": "",
	"printer_technology": "FFF",
	"purge_in_prime_tower": "0",
	"enable_filament_ramming": "0",
	"retraction_minimum_travel": [
		"1"
	],
	"retract_before_wipe": [
		"70%"
	],
	"retract_when_changing_layer": [
		"1"
	],
	"retraction_length": [
		"0"
	],
	"retract_length_toolchange": [
		"2"
	],
	"z_hop": [
		"0.4"
	],
	"retract_restart_extra": [
		"0"
	],
	"retract_restart_extra_toolchange": [
		"0"
	],
	"retraction_speed": [
		"40"
	],
	"deretraction_speed": [
		"30"
	],
	"z_hop_types": "Normal Lift",
	"silent_mode": "0",
	"single_extruder_multi_material": "1",
	"change_filament_gcode": "M600",
	"machine_pause_gcode": "PAUSE",
	"wipe": [
		"1"
	],
	"default_filament_profile": [
		"re3D Greengate rPETG"
	],
	"default_print_profile": "1.0mm Standard @re3D fgf 1.75",
	"bed_exclude_area": [
		"0x0"
	],
	"machine_start_gcode": "M220 S100\nM221 S100\nG28\nG92 E0\nG1 Z0.3 F200\n",
	"machine_end_gcode": "M104 S0 T0\nM104 S0 T1\nM104 S0 T2\nM140 S0\n\nG28 X Y\nM18\nM107\n",
	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
	"scan_first_layer": "0",
	"nozzle_type": "undefine",
	"auxiliary_fan": "0"
}