{
	"type": "filament",
	"name": "re3D PC @0.8 nozzle",
	"from": "system",
	"instantiation": "true",
	"inherits": "fdm_filament_pc",
	"filament_id": "GFG99",
	"setting_id": "re3d_pc_08",
	"filament_settings_id": [
		"re3D PC @0.8 nozzle"
	],
	"compatible_printers": [
		"re3D Gigabot 4 0.8 nozzle",
		"re3D Gigabot 4 XLT 0.8 nozzle",
		"re3D Terabot 4 0.8 nozzle"
	],
	"filament_vendor": [
		"re3D"
	],
	"filament_density": [
		"1.19"
	],
	"filament_diameter": [
		"2.85"
	],
	"filament_flow_ratio": [
		"0.99"
	],
	"filament_max_volumetric_speed": [
		"11.5"
	],
	"nozzle_temperature": [
		"265"
	],
	"nozzle_temperature_initial_layer": [
		"265"
	],
	"nozzle_temperature_range_low": [
		"250"
	],
	"nozzle_temperature_range_high": [
		"270"
	],
	"hot_plate_temp": [
		"115"
	],
	"hot_plate_temp_initial_layer": [
		"113"
	],
	"cool_plate_temp": [
		"115"
	],
	"cool_plate_temp_initial_layer": [
		"113"
	],
	"eng_plate_temp": [
		"115"
	],
	"eng_plate_temp_initial_layer": [
		"113"
	],
	"textured_plate_temp": [
		"115"
	],
	"textured_plate_temp_initial_layer": [
		"113"
	],
	"fan_max_speed": [
		"80"
	],
	"fan_min_speed": [
		"30"
	],
	"fan_cooling_layer_time": [
		"20"
	],
	"close_fan_the_first_x_layers": [
		"2"
	],
	"overhang_fan_threshold": [
		"50%"
	],
	"overhang_fan_speed": [
		"40"
	],
	"enable_overhang_bridge_fan": [
		"1"
	],
	"slow_down_for_layer_cooling": [
		"1"
	],
	"slow_down_layer_time": [
		"30"
	],
	"slow_down_min_speed": [
		"30"
	],
	"pressure_advance": [
		"0.096"
	],
	"enable_pressure_advance": [
		"1"
	],
	"reduce_fan_stop_start_freq": [
		"0"
	],
	"filament_retraction_length": [
		"0.8"
	],
	"filament_soluble": [
		"0"
	],
	"support_material_interface_fan_speed": [
		"100"
	],
	"filament_multitool_ramming": [
		"1"
	],
	"filament_multitool_ramming_volume": [
		"20"
	],
	"filament_multitool_ramming_flow": [
		"10.5"
	],
	"filament_minimal_purge_on_wipe_tower": [
		"15"
	],
	"filament_tower_interface_pre_extrusion_dist": [
		"0"
	],
	"filament_tower_interface_pre_extrusion_length": [
		"0"
	],
	"filament_tower_ironing_area": [
		"0"
	],
	"filament_tower_interface_purge_volume": [
		"0"
	],
	"filament_tower_interface_print_temp": [
		"0"
	],
	"filament_loading_speed_start": [
		"0"
	],
	"filament_loading_speed": [
		"0"
	],
	"filament_unloading_speed_start": [
		"0"
	],
	"filament_unloading_speed": [
		"0"
	],
	"filament_toolchange_delay": [
		"0"
	],
	"filament_cooling_moves": [
		"0"
	],
	"filament_cooling_initial_speed": [
		"0"
	],
	"filament_cooling_final_speed": [
		"0"
	],
	"filament_stamping_loading_speed": [
		"0"
	],
	"filament_stamping_distance": [
		"0"
	]
}