{
	"type": "process",
	"name": "0.40mm Standard @Elegoo Neptune 0.8 nozzle",
	"inherits": "fdm_process_elegoo_08040",
	"from": "system",
	"setting_id": "PEN208040",
	"instantiation": "true",
	"filename_format": "{nozzle_diameter[0]}{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode",
	"default_acceleration": "1000",
	"gap_infill_speed": "30",
	"initial_layer_infill_speed": "50",
	"initial_layer_speed": "30",
	"inner_wall_speed": "60",
	"internal_bridge_speed": "100%",
	"internal_solid_infill_speed": "60",
	"outer_wall_acceleration": "500",
	"outer_wall_speed": "30",
	"overhang_2_4_speed": "20",
	"overhang_3_4_speed": "10",
	"skirt_speed": "30",
	"sparse_infill_speed": "60",
	"support_interface_speed": "30",
	"support_speed": "60",
	"top_surface_acceleration": "1000",
	"top_surface_speed": "30",
	"only_one_wall_top": "0",
	"enable_arc_fitting": "0",
	"compatible_printers": [
		"Elegoo Neptune 2 0.8 nozzle",
		"Elegoo Neptune 3 0.8 nozzle",
		"Elegoo Neptune X 0.8 nozzle",
		"Elegoo Neptune 2S 0.8 nozzle",
		"Elegoo Neptune 2D 0.8 nozzle",
		"Elegoo Neptune 0.8 nozzle"
	]
}