[Profiles] Fix bed_exclude_area excluding the whole bed on Anycubic Kobra 3 (#10914)

update de

localization/i18n/OrcaSlicer.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -5846,6 +5846,17 @@ msgstr ""
 msgid "Load 3mf"
 msgstr ""
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr ""
+
 #, possible-c-format, possible-boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -8224,10 +8235,10 @@ msgstr ""
 msgid "Global shortcuts"
 msgstr ""
 
-msgid "Rotate View"
+msgid "Pan View"
 msgstr ""
 
-msgid "Pan View"
+msgid "Rotate View"
 msgstr ""
 
 msgid "Zoom View"

localization/i18n/ca/OrcaSlicer_ca.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "PO-Revision-Date: 2025-03-15 10:55+0100\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6291,6 +6291,17 @@ msgstr ""
 msgid "Load 3mf"
 msgstr "Carregar 3mf"
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -8987,12 +8998,12 @@ msgstr "Mostrar la llista de dreceres de teclat"
 msgid "Global shortcuts"
 msgstr "Dreceres Globals"
 
-msgid "Rotate View"
-msgstr "Rotar la vista"
-
 msgid "Pan View"
 msgstr "Vista Panoràmica"
 
+msgid "Rotate View"
+msgstr "Rotar la vista"
+
 msgid "Zoom View"
 msgstr "Vista amb Zoom"
 

localization/i18n/cs/OrcaSlicer_cs.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "PO-Revision-Date: 2024-11-03 20:59+0100\n"
 "Last-Translator: René Mošner <Renemosner@seznam.cz>\n"
 "Language-Team: \n"
@@ -6170,6 +6170,17 @@ msgstr ""
 msgid "Load 3mf"
 msgstr "Načíst 3mf"
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -8733,12 +8744,12 @@ msgstr "Zobrazit přehled klávesových zkratek"
 msgid "Global shortcuts"
 msgstr "Globální zkratky"
 
-msgid "Rotate View"
-msgstr "Otočit pohled"
-
 msgid "Pan View"
 msgstr "Zobrazení panorama"
 
+msgid "Rotate View"
+msgstr "Otočit pohled"
+
 msgid "Zoom View"
 msgstr "Zvětšit zobrazení"
 

localization/i18n/de/OrcaSlicer_de.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
 "Language-Team: \n"
@@ -4296,8 +4296,8 @@ msgid ""
 "Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per "
 "entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18."
 msgstr ""
-"Ungültiges Muster. Verwenden Sie N, N#K oder eine durch Kommas getrennte Liste "
+"Ungültiges Muster. Verwenden Sie N, N#K oder eine durch Kommas getrennte "
-"mit optionalem #K pro Eintrag. Beispiele: 5, 5#2, 1,7,9, 5,9#2,18."
+"Liste mit optionalem #K pro Eintrag. Beispiele: 5, 5#2, 1,7,9, 5,9#2,18."
 
 #, boost-format
 msgid "Invalid format. Expected vector format: \"%1%\""
@@ -6361,6 +6361,23 @@ msgstr "Der 3mf stammt nicht vom OrcaSlicer, lade nur die Geometriedaten."
 msgid "Load 3mf"
 msgstr "Lade 3mf"
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+"Dieses Projekt wurde mit einem OrcaSlicer 2.3.1-alpha erstellt und verwendet "
+"Vorlageneinstellungen für die Infill-Rotation, die möglicherweise nicht "
+"richtig mit Ihrem aktuellen Infill-Muster funktionieren. Dies könnte zu "
+"schwacher Unterstützung oder Druckqualitätsproblemen führen."
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr ""
+"Möchten Sie, dass OrcaSlicer dies automatisch behebt, indem die "
+"Vorlageneinstellungen für die Rotation gelöscht werden?"
+
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -7212,7 +7229,9 @@ msgid "Maximum count of recent files"
 msgstr "Maximale Anzahl der zuletzt verwendeten Dateien"
 
 msgid "Add model files (stl/step) to recent file list."
-msgstr "Modell-Dateien (stl/step) zur Liste der zuletzt verwendeten Dateien hinzufügen."  
+msgstr ""
+"Modell-Dateien (stl/step) zur Liste der zuletzt verwendeten Dateien "
+"hinzufügen."
 
 msgid "Clear my choice on the unsaved projects."
 msgstr "Meine Auswahl für nicht gespeicherte Projekte löschen."
@@ -9110,12 +9129,12 @@ msgstr "Liste der Tastaturkürzel anzeigen"
 msgid "Global shortcuts"
 msgstr "Globale Tastaturkürzel"
 
-msgid "Rotate View"
-msgstr "Drehen der Ansicht"
-
 msgid "Pan View"
 msgstr "Pan-Ansicht"
 
+msgid "Rotate View"
+msgstr "Drehen der Ansicht"
+
 msgid "Zoom View"
 msgstr "Ansicht zoomen"
 
@@ -12355,11 +12374,11 @@ msgid ""
 "'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at "
 "explicit layers. Layers are 1-based."
 msgstr ""
-"Fügt an bestimmten Schichten massive Füllung ein. Verwenden Sie N, um jede "
+"Fügt an bestimmten Schichten massive Füllung ein. Verwenden Sie N, um jede N-"
-"N-te Schicht einzufügen, N#K, um K aufeinanderfolgende massive Schichten alle N "
+"te Schicht einzufügen, N#K, um K aufeinanderfolgende massive Schichten alle "
-"Schichten einzufügen (K ist optional, z.B. '5#' entspricht '5#1'), oder eine "
+"N Schichten einzufügen (K ist optional, z.B. '5#' entspricht '5#1'), oder "
-"kommagetrennte Liste (z.B. 1,7,9), um sie in expliziten Schichten einzufügen. "
+"eine kommagetrennte Liste (z.B. 1,7,9), um sie in expliziten Schichten "
-"Schichten sind 1-basiert." 
+"einzufügen. Schichten sind 1-basiert."
 
 msgid "Fill Multiline"
 msgstr "Mehrzeilige Füllung"
@@ -13229,12 +13248,12 @@ msgid ""
 msgstr ""
 "Drehen Sie die Richtung der spärlichen Füllung pro Schicht mit einer Vorlage "
 "von Winkeln. Geben Sie durch Kommas getrennte Grad ein (z.B. '0,30,60,90'). "
-"Winkel werden schichtweise in der Reihenfolge angewendet und wiederholt, wenn "
+"Winkel werden schichtweise in der Reihenfolge angewendet und wiederholt, "
-"die Liste endet. Erweiterte Syntax wird unterstützt: '+5' dreht +5° jede "
+"wenn die Liste endet. Erweiterte Syntax wird unterstützt: '+5' dreht +5° "
-"Schicht; '+5#5' dreht +5° alle 5 Schichten. Siehe das Wiki für Details. Wenn eine "
+"jede Schicht; '+5#5' dreht +5° alle 5 Schichten. Siehe das Wiki für Details. "
-"Vorlage festgelegt ist, wird die Standardfüllrichtungseinstellung ignoriert. "
+"Wenn eine Vorlage festgelegt ist, wird die Standardfüllrichtungseinstellung "
-"Beachten Sie: Einige Füllmuster (z.B. Gyroid) steuern die Rotation selbst; "
+"ignoriert. Beachten Sie: Einige Füllmuster (z.B. Gyroid) steuern die "
-"verwenden Sie sie mit Vorsicht."
+"Rotation selbst; verwenden Sie sie mit Vorsicht."
 
 msgid "°"
 msgstr "°"

localization/i18n/en/OrcaSlicer_en.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "PO-Revision-Date: 2025-05-18 09:32-0300\n"
 "Last-Translator: Alexandre Folle de Menezes\n"
 "Language-Team: \n"
@@ -5938,6 +5938,17 @@ msgstr "The 3mf is not supported by OrcaSlicer, loading geometry data only."
 msgid "Load 3mf"
 msgstr ""
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -8389,10 +8400,10 @@ msgstr ""
 msgid "Global shortcuts"
 msgstr ""
 
-msgid "Rotate View"
+msgid "Pan View"
 msgstr ""
 
-msgid "Pan View"
+msgid "Rotate View"
 msgstr ""
 
 msgid "Zoom View"

localization/i18n/es/OrcaSlicer_es.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Carlos Fco. Caruncho Serrano <puzzlero@gmail.com>\n"
 "Language-Team: \n"
@@ -6309,6 +6309,17 @@ msgstr "El 3mf no es de Orca Slicer, cargando sólo datos de geometría."
 msgid "Load 3mf"
 msgstr "Cargar 3mf"
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -9004,12 +9015,12 @@ msgstr "Muestra lista de atajos de teclado"
 msgid "Global shortcuts"
 msgstr "Atajos globales"
 
-msgid "Rotate View"
-msgstr "Rotar Vista"
-
 msgid "Pan View"
 msgstr "Desplazar vista"
 
+msgid "Rotate View"
+msgstr "Rotar Vista"
+
 msgid "Zoom View"
 msgstr "Hacer Zoom"
 

localization/i18n/fr/OrcaSlicer_fr.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: Guislain Cyril, Thomas Lété\n"
@@ -6334,6 +6334,17 @@ msgstr ""
 msgid "Load 3mf"
 msgstr "Charger 3mf"
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -9100,12 +9111,12 @@ msgstr "Afficher la liste des raccourcis clavier"
 msgid "Global shortcuts"
 msgstr "Raccourcis globaux"
 
-msgid "Rotate View"
-msgstr "Rotation de la vue"
-
 msgid "Pan View"
 msgstr "Déplacement de vue"
 
+msgid "Rotate View"
+msgstr "Rotation de la vue"
+
 msgid "Zoom View"
 msgstr "Vue agrandie"
 

localization/i18n/hu/OrcaSlicer_hu.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -6082,6 +6082,17 @@ msgstr ""
 msgid "Load 3mf"
 msgstr "3mf betöltése"
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -8629,12 +8640,12 @@ msgstr "Gyorsgombok listájának megjelenítése"
 msgid "Global shortcuts"
 msgstr "Globális gyorsbillentyűk"
 
-msgid "Rotate View"
-msgstr "Nézet elforgatása"
-
 msgid "Pan View"
 msgstr "Pásztázó nézet"
 
+msgid "Rotate View"
+msgstr "Nézet elforgatása"
+
 msgid "Zoom View"
 msgstr "Nagyítás nézet"
 

localization/i18n/it/OrcaSlicer_it.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6312,6 +6312,17 @@ msgstr ""
 msgid "Load 3mf"
 msgstr "Carica 3mf"
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -9030,12 +9041,12 @@ msgstr "Mostra elenco scorciatoie da tastiera"
 msgid "Global shortcuts"
 msgstr "Scorciatoie globali"
 
-msgid "Rotate View"
-msgstr "Ruota vista"
-
 msgid "Pan View"
 msgstr "Vista panoramica"
 
+msgid "Rotate View"
+msgstr "Ruota vista"
+
 msgid "Zoom View"
 msgstr "Ingrandimento vista"
 

localization/i18n/ja/OrcaSlicer_ja.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -5964,6 +5964,17 @@ msgstr ""
 msgid "Load 3mf"
 msgstr "3mfを読込み"
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -8423,12 +8434,12 @@ msgstr "ショートカット一覧を表示"
 msgid "Global shortcuts"
 msgstr "ショートカット"
 
-msgid "Rotate View"
-msgstr "回転"
-
 msgid "Pan View"
 msgstr "移動"
 
+msgid "Rotate View"
+msgstr "回転"
+
 msgid "Zoom View"
 msgstr "ズーム"
 

localization/i18n/ko/OrcaSlicer_ko.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "PO-Revision-Date: 2025-06-02 17:12+0900\n"
 "Last-Translator: crwusiz <crwusiz@gmail.com>\n"
 "Language-Team: \n"
@@ -6122,6 +6122,17 @@ msgstr "이 3mf는 OrcaSlicer에서 지원되지 않습니다. 형상 데이터
 msgid "Load 3mf"
 msgstr "3mf 불러오기"
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -8707,12 +8718,12 @@ msgstr "키보드 단축키 목록 보기"
 msgid "Global shortcuts"
 msgstr "전역 단축키"
 
-msgid "Rotate View"
-msgstr "시점 회전"
-
 msgid "Pan View"
 msgstr "시점 이동"
 
+msgid "Rotate View"
+msgstr "시점 회전"
+
 msgid "Zoom View"
 msgstr "시점 확대/축소"
 

localization/i18n/lt/OrcaSlicer_lt.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "PO-Revision-Date: 2025-03-21 21:00+0200\n"
 "Last-Translator: Gintaras Kučinskas <sharanchius@gmail.com>\n"
 "Language-Team: \n"
@@ -6256,6 +6256,17 @@ msgstr "3MF nepalaikomas Orca Slicer. Įkeliami tik geometrijos duomenys."
 msgid "Load 3mf"
 msgstr "Įkelti 3MF"
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -8945,12 +8956,12 @@ msgstr "Rodyti sparčiųjų klavišų sąrašą"
 msgid "Global shortcuts"
 msgstr "Bendrieji spartieji klavišai"
 
-msgid "Rotate View"
-msgstr "Pasukti vaizdą"
-
 msgid "Pan View"
 msgstr "Judinti vaizdą"
 
+msgid "Rotate View"
+msgstr "Pasukti vaizdą"
+
 msgid "Zoom View"
 msgstr "Padidinti vaizdą"
 

localization/i18n/nl/OrcaSlicer_nl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6144,6 +6144,17 @@ msgstr ""
 msgid "Load 3mf"
 msgstr "Laad 3mf"
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -8772,10 +8783,10 @@ msgstr "Toon lijst met sneltoetsen"
 msgid "Global shortcuts"
 msgstr "Globale snelkoppelingen"
 
-msgid "Rotate View"
+msgid "Pan View"
 msgstr ""
 
-msgid "Pan View"
+msgid "Rotate View"
 msgstr ""
 
 msgid "Zoom View"

localization/i18n/pl/OrcaSlicer_pl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer 2.3.0-rc\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Krzysztof Morga <<tlumaczeniebs@gmail.com>>\n"
 "Language-Team: \n"
@@ -6275,6 +6275,17 @@ msgstr ""
 msgid "Load 3mf"
 msgstr "Wczytaj 3MF"
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -8944,12 +8955,12 @@ msgstr "Pokaż listę skrótów klawiszowych"
 msgid "Global shortcuts"
 msgstr "Globalne skróty"
 
-msgid "Rotate View"
-msgstr "Obróć widok"
-
 msgid "Pan View"
 msgstr "Przesuń widok"
 
+msgid "Rotate View"
+msgstr "Obróć widok"
+
 msgid "Zoom View"
 msgstr "Przybliż widok"
 

localization/i18n/pt_BR/OrcaSlicer_pt_BR.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "PO-Revision-Date: 2025-08-13 10:05-0300\n"
 "Last-Translator: Alexandre Folle de Menezes\n"
 "Language-Team: Portuguese, Brazilian\n"
@@ -1568,8 +1568,8 @@ msgid ""
 "features.\n"
 "Click Yes to install it now."
 msgstr ""
-"O OrcaSlicer requer o Microsoft WebView2 Runtime para operar "
+"O OrcaSlicer requer o Microsoft WebView2 Runtime para operar determinados "
-"determinados recursos.\n"
+"recursos.\n"
 "Clique em Sim para instalá-lo agora."
 
 msgid "WebView2 Runtime"
@@ -4245,8 +4245,8 @@ msgid ""
 "Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per "
 "entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18."
 msgstr ""
-"Padrão inválido. Use N, N#K, ou uma lista separa por vírgulas com #K opcional "
+"Padrão inválido. Use N, N#K, ou uma lista separa por vírgulas com #K "
-"por entrada. Examplos: 5, 5#2, 1,7,9, 5,9#2,18."
+"opcional por entrada. Examplos: 5, 5#2, 1,7,9, 5,9#2,18."
 
 #, boost-format
 msgid "Invalid format. Expected vector format: \"%1%\""
@@ -6216,8 +6216,8 @@ msgid ""
 "presets."
 msgstr ""
 "Alguns filamentos desconhecidos foram mapeados para a predefinição genérica. "
-"Por favor, atualize o OrcaSlicer ou reinicie o OrcaSlicer para verificar "
+"Por favor, atualize o OrcaSlicer ou reinicie o OrcaSlicer para verificar se "
-"se há uma atualização para as predefinições do sistema."
+"há uma atualização para as predefinições do sistema."
 
 #, boost-format
 msgid "Do you want to save changes to \"%1%\"?"
@@ -6286,6 +6286,17 @@ msgstr ""
 msgid "Load 3mf"
 msgstr "Carregar 3mf"
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -6985,8 +6996,9 @@ msgid "Orbit speed multiplier"
 msgstr "Multiplicador de velocidade de órbita"
 
 msgid "Multiplies the orbit speed for finer or coarser camera movement."
-msgstr "Multiplica a velocidade da órbita para um movimento de câmera "
+msgstr ""
-"mais fino ou mais grosseiro."
+"Multiplica a velocidade da órbita para um movimento de câmera mais fino ou "
+"mais grosseiro."
 
 msgid "Show splash screen"
 msgstr "Mostrar tela de abertura"
@@ -7869,9 +7881,9 @@ msgid ""
 "A prime tower is required for smooth timelapse. There may be flaws on the "
 "model without prime tower. Are you sure you want to disable prime tower?"
 msgstr ""
-"Uma torre de preparo é necessária para um timelapse suave. Pode haver "
+"Uma torre de preparo é necessária para um timelapse suave. Pode haver falhas "
-"falhas no modelo sem a torre de preparo. Tem certeza de que deseja "
+"no modelo sem a torre de preparo. Tem certeza de que deseja desativar a "
-"desativar a torre de preparo?"
+"torre de preparo?"
 
 msgid ""
 "Enabling both precise Z height and the prime tower may cause the size of "
@@ -7884,9 +7896,8 @@ msgid ""
 "A prime tower is required for smooth timelapse. There may be flaws on the "
 "model without prime tower. Do you want to enable prime tower?"
 msgstr ""
-"Uma torre de preparo é necessária para um timelapse suave. Pode haver "
+"Uma torre de preparo é necessária para um timelapse suave. Pode haver falhas "
-"falhas no modelo sem a torre de preparo. Deseja ativar a torre de "
+"no modelo sem a torre de preparo. Deseja ativar a torre de preparo?"
-"preparo?"
 
 msgid "Still print by object?"
 msgstr "Ainda imprimir por objeto?"
@@ -9009,12 +9020,12 @@ msgstr "Mostrar lista de atalhos de teclado"
 msgid "Global shortcuts"
 msgstr "Atalhos globais"
 
-msgid "Rotate View"
-msgstr "Rotacionar vista"
-
 msgid "Pan View"
 msgstr "Movimentar vista"
 
+msgid "Rotate View"
+msgstr "Rotacionar vista"
+
 msgid "Zoom View"
 msgstr "Aproximar vista"
 
@@ -9280,8 +9291,7 @@ msgstr "Conecte a impressora usando IP e código de acesso"
 
 msgid ""
 "Step 1. Please confirm Orca Slicer and your printer are in the same LAN."
-msgstr ""
+msgstr "Passo 1. Confirme se o OrcaSlicer e sua impressora estão na mesma LAN."
-"Passo 1. Confirme se o OrcaSlicer e sua impressora estão na mesma LAN."
 
 msgid ""
 "Step 2. If the IP and Access Code below are different from the actual values "
@@ -9782,8 +9792,8 @@ msgid ""
 "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, "
 "RepRapFirmware and Repetier G-code flavors."
 msgstr ""
-"A torre de preparo atualmente só é suportada para os G-code do tipo "
+"A torre de preparo atualmente só é suportada para os G-code do tipo Marlin, "
-"Marlin, RepRap/Sprinter, RepRapFirmware e Repetier."
+"RepRap/Sprinter, RepRapFirmware e Repetier."
 
 msgid "The prime tower is not supported in \"By object\" print."
 msgstr "A torre de preparo não é suportada na impressão \"Por objeto\"."
@@ -9792,26 +9802,26 @@ msgid ""
 "The prime tower is not supported when adaptive layer height is on. It "
 "requires that all objects have the same layer height."
 msgstr ""
-"A torre de preparo não é suportada quando a altura de camada adaptativa "
+"A torre de preparo não é suportada quando a altura de camada adaptativa está "
-"está ativa. Isso requer que todos os objetos tenham a mesma altura de camada."
+"ativa. Isso requer que todos os objetos tenham a mesma altura de camada."
 
 msgid ""
 "The prime tower requires \"support gap\" to be multiple of layer height."
 msgstr ""
-"A torre de preparo requer que o \"vão de suporte\" seja múltiplo da "
+"A torre de preparo requer que o \"vão de suporte\" seja múltiplo da altura "
-"altura da camada."
+"da camada."
 
 msgid "The prime tower requires that all objects have the same layer heights."
 msgstr ""
-"A torre de preparo requer que todos os objetos tenham as mesmas alturas "
+"A torre de preparo requer que todos os objetos tenham as mesmas alturas de "
-"de camada."
+"camada."
 
 msgid ""
 "The prime tower requires that all objects are printed over the same number "
 "of raft layers."
 msgstr ""
-"A torre de preparo requer que todos os objetos sejam impressos sobre o "
+"A torre de preparo requer que todos os objetos sejam impressos sobre o mesmo "
-"mesmo número de camadas da jangada."
+"número de camadas da jangada."
 
 msgid ""
 "The prime tower is only supported for multiple objects if they are printed "
@@ -9824,15 +9834,15 @@ msgid ""
 "The prime tower requires that all objects are sliced with the same layer "
 "heights."
 msgstr ""
-"A torre de preparo requer que todos os objetos sejam fatiados com as "
+"A torre de preparo requer que todos os objetos sejam fatiados com as mesmas "
-"mesmas alturas de camada."
+"alturas de camada."
 
 msgid ""
 "The prime tower is only supported if all objects have the same variable "
 "layer height."
 msgstr ""
-"A torre de preparo só é suportada se todos os objetos tiverem a mesma "
+"A torre de preparo só é suportada se todos os objetos tiverem a mesma altura "
-"altura de camada variável."
+"de camada variável."
 
 msgid ""
 "One or more object were assigned an extruder that the printer does not have."
@@ -10308,7 +10318,8 @@ msgstr "Tipo de placa padrão"
 
 msgid ""
 "Default bed type for the printer (supports both numeric and string format)."
-msgstr "Tipo de placa padrão para a impressora (suporta formato numérico ou string)."
+msgstr ""
+"Tipo de placa padrão para a impressora (suporta formato numérico ou string)."
 
 msgid "First layer print sequence"
 msgstr "Sequência de impressão da primeira camada"
@@ -10635,10 +10646,9 @@ msgid ""
 "layer consistency. NOTE: This option will be ignored for outer-inner or "
 "inner-outer-inner wall sequences."
 msgstr ""
-"Melhora a precisão da casca ajustando o espaçamento da parede externa. "
+"Melhora a precisão da casca ajustando o espaçamento da parede externa. Isso "
-"Isso também melhora a consistência da camada. Nota: Esta opção será ignorada "
+"também melhora a consistência da camada. Nota: Esta opção será ignorada se a "
-"se a sequência da parede for externa-interna ou interna-externa-interna."
+"sequência da parede for externa-interna ou interna-externa-interna."
-
 
 msgid "Only one wall on top surfaces"
 msgstr "Parede única em superfícies superiores"
@@ -12216,8 +12226,8 @@ msgstr ""
 "Insere preenchimento sólido em camadas específicas. Use N para inserir a "
 "cada enésima camada, N#K para inserir K camadas sólidas consecutivas a cada "
 "enésima camada (K é opcional, ou seja, '5#' é igual a '5#1'), ou uma lista "
-"separada por vírgulas (Ex. 1,7,9) para inserir em camadas esplícitas. Camadas "
+"separada por vírgulas (Ex. 1,7,9) para inserir em camadas esplícitas. "
-"são baseadas em 1."
+"Camadas são baseadas em 1."
 
 msgid "Fill Multiline"
 msgstr "Multilinhas de Preenchimento"
@@ -13468,10 +13478,10 @@ msgid ""
 "semicolon, in the following format: \"1.234, 5.678;\""
 msgstr ""
 "Modelo de Compensação de Fluxo, usado para ajustar o fluxo para áreas de "
-"preenchimento pequenas. O modelo é expresso como um par de valores "
+"preenchimento pequenas. O modelo é expresso como um par de valores separados "
-"separados por vírgula para o comprimento de extrusão e o fator de "
+"por vírgula para o comprimento de extrusão e o fator de correção de fluxo. "
-"correção de fluxo. Cada par em uma linha separeada, seguido por "
+"Cada par em uma linha separeada, seguido por ponto-e-vírgula, no seguinte "
-"ponto-e-vírgula, no seguinte formato: \"1.234, 5.678;\""
+"formato: \"1.234, 5.678;\""
 
 msgid "Maximum speed X"
 msgstr "Velocidade máxima X"
@@ -15093,8 +15103,7 @@ msgid ""
 msgstr ""
 "A camada de suporte usa uma altura de camada independente da camada do "
 "objeto. Isso é para suportar a personalização do vão-Z e economizar tempo de "
-"impressão. Esta opção será inválida quando a torre de preparo estiver "
+"impressão. Esta opção será inválida quando a torre de preparo estiver ativa."
-"ativa."
 
 msgid "Threshold angle"
 msgstr "Ângulo limiar"
@@ -15272,8 +15281,8 @@ msgid ""
 "the surface."
 msgstr ""
 "A quantidade de material a extrudar durante o passar a ferro. Relativo ao "
-"fluxo da altura normal da camada de interface. Um valor muito alto resulta em "
+"fluxo da altura normal da camada de interface. Um valor muito alto resulta "
-"superextrusão na superfície."
+"em superextrusão na superfície."
 
 msgid "Support Ironing line spacing"
 msgstr ""
@@ -16911,8 +16920,8 @@ msgstr ""
 "Agora adicionamos a auto-calibração para diferentes filamentos, que é "
 "totalmente automatizada e o resultado será salvo na impressora para uso "
 "futuro. Você só precisa fazer a calibração nos seguintes casos limitados:\n"
-"1. Se você introduzir um novo filamento de marcas/modelos diferentes ou "
+"1. Se você introduzir um novo filamento de marcas/modelos diferentes ou se o "
-"se o filamento estiver úmido;\n"
+"filamento estiver úmido;\n"
 "2. Se o bico estiver desgastado ou for substituído por um novo;\n"
 "3. Se o fluxo volumétrico máximo ou a temperatura de impressão forem "
 "alteradas na configuração do filamento."
@@ -19749,8 +19758,8 @@ msgstr ""
 #~ msgid ""
 #~ "Ooze prevention is currently not supported with the prime tower enabled."
 #~ msgstr ""
-#~ "A prevenção de vazamento atualmente não é suportada com a torre de "
+#~ "A prevenção de vazamento atualmente não é suportada com a torre de prepao "
-#~ "prepao ativa."
+#~ "ativa."
 
 #~ msgid ""
 #~ "Interlocking depth of a segmented region. Zero disables this feature."

localization/i18n/ru/OrcaSlicer_ru.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer V2.3.0 Official Release\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "PO-Revision-Date: 2025-07-06 21:08+0700\n"
 "Last-Translator: \n"
 "Language-Team: Andylg <andylg@yandex.ru>\n"
@@ -6350,6 +6350,17 @@ msgstr ""
 msgid "Load 3mf"
 msgstr "Загрузка 3mf"
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -9099,12 +9110,12 @@ msgstr "Показать список сочетаний клавиш"
 msgid "Global shortcuts"
 msgstr "Глобальные горячие клавиши"
 
-msgid "Rotate View"
-msgstr "Вращение камеры"
-
 msgid "Pan View"
 msgstr "Перемещение камеры"
 
+msgid "Rotate View"
+msgstr "Вращение камеры"
+
 msgid "Zoom View"
 msgstr "Масштабирование вида"
 

localization/i18n/sv/OrcaSlicer_sv.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -6070,6 +6070,17 @@ msgstr "3mf kommer inte från Orca Slicer, laddar endast geometri data."
 msgid "Load 3mf"
 msgstr "Ladda 3mf"
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -8618,12 +8629,12 @@ msgstr "Visa tangentbordets genvägs lista"
 msgid "Global shortcuts"
 msgstr "Övergripande genvägar"
 
-msgid "Rotate View"
-msgstr "Rotera vy"
-
 msgid "Pan View"
 msgstr "Panoreringsvy"
 
+msgid "Rotate View"
+msgstr "Rotera vy"
+
 msgid "Zoom View"
 msgstr "Zoomvy"
 

localization/i18n/tr/OrcaSlicer_tr.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "PO-Revision-Date: 2025-09-14 23:43+0300\n"
 "Last-Translator: GlauTech\n"
 "Language-Team: \n"
@@ -6235,6 +6235,17 @@ msgstr ""
 msgid "Load 3mf"
 msgstr "3mf yükle"
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -8914,12 +8925,12 @@ msgstr "Klavye kısayolları listesini göster"
 msgid "Global shortcuts"
 msgstr "Genel kısayollar"
 
-msgid "Rotate View"
-msgstr "Görüntüyü döndür"
-
 msgid "Pan View"
 msgstr "Pan Görünümü"
 
+msgid "Rotate View"
+msgstr "Görüntüyü döndür"
+
 msgid "Zoom View"
 msgstr "Zoom Görünümü"
 
@@ -12475,6 +12486,7 @@ msgstr "İlk katmana pütürlü yüzey uygulanıp uygulanmayacağı."
 msgid "Fuzzy skin generator mode"
 msgstr "Pütürlü yüzey oluşturma modu"
 
+#, fuzzy, c-format, boost-format
 msgid ""
 "Fuzzy skin generation mode. Works only with Arachne!\n"
 "Displacement: Сlassic mode when the pattern is formed by shifting the nozzle "

localization/i18n/uk/OrcaSlicer_uk.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: orcaslicerua\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "PO-Revision-Date: 2025-03-07 09:30+0200\n"
 "Last-Translator: \n"
 "Language-Team: Ukrainian\n"
@@ -6294,6 +6294,17 @@ msgstr "3mf не від Orca Slicer, завантажуйте лише дані
 msgid "Load 3mf"
 msgstr "Завантажити 3mf"
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -8972,12 +8983,12 @@ msgstr "Показати список клавіш"
 msgid "Global shortcuts"
 msgstr "Глобальні ярлики"
 
-msgid "Rotate View"
-msgstr "Повернути вигляд"
-
 msgid "Pan View"
 msgstr "Панорамний вигляд"
 
+msgid "Rotate View"
+msgstr "Повернути вигляд"
+
 msgid "Zoom View"
 msgstr "Перегляд масштабу"
 

localization/i18n/zh_CN/OrcaSlicer_zh_CN.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "PO-Revision-Date: 2024-07-28 07:12+0000\n"
 "Last-Translator: Handle <mail@bysb.net>\n"
 "Language-Team: \n"
@@ -6001,6 +6001,19 @@ msgstr "该3mf文件不是来自Orca Slicer，将只加载几何数据。"
 msgid "Load 3mf"
 msgstr "加载3mf"
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+"该项目由 OrcaSlicer 2.3.1-alpha 创建，并使用了填充旋转模板设置，这些设置可能"
+"无法与您当前的填充模式正常配合，可能导致支撑不足或打印质量问题。"
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr "您是否希望 OrcaSlicer 清除旋转模板设置以自动修复此问题？"
+
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -8503,12 +8516,12 @@ msgstr "显示键盘快捷键列表"
 msgid "Global shortcuts"
 msgstr "全局快捷键"
 
-msgid "Rotate View"
-msgstr "旋转视角"
-
 msgid "Pan View"
 msgstr "移动视角"
 
+msgid "Rotate View"
+msgstr "旋转视角"
+
 msgid "Zoom View"
 msgstr "缩放视角"
 

localization/i18n/zh_TW/OrcaSlicer_zh_TW.po

@@ -9,7 +9,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-11 21:06+0800\n"
+"POT-Creation-Date: 2025-09-28 18:44+0800\n"
 "PO-Revision-Date: 2025-03-27 19:32+0800\n"
 "Last-Translator: 5idereal <hi@5idereal.cc>\n"
 "Language-Team: \n"
@@ -6017,6 +6017,17 @@ msgstr "該 3mf 檔案不是來自 Orca Slicer，將只載入幾何資料。"
 msgid "Load 3mf"
 msgstr "載入 3mf"
 
+msgid ""
+"This project was created with an OrcaSlicer 2.3.1-alpha and uses infill "
+"rotation template settings that may not work properly with your current "
+"infill pattern. This could result in weak support or print quality issues."
+msgstr ""
+
+msgid ""
+"Would you like OrcaSlicer to automatically fix this by clearing the rotation "
+"template settings?"
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, found following "
@@ -8525,12 +8536,12 @@ msgstr "顯示鍵盤快捷鍵清單"
 msgid "Global shortcuts"
 msgstr "全域快捷鍵"
 
-msgid "Rotate View"
-msgstr "旋轉視角"
-
 msgid "Pan View"
 msgstr "移動視角"
 
+msgid "Rotate View"
+msgstr "旋轉視角"
+
 msgid "Zoom View"
 msgstr "縮放視角"
 

resources/profiles/Afinia.json

@@ -1,6 +1,6 @@
 {
     "name": "Afinia",
-    "version": "02.03.01.01",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Afinia configurations",
     "machine_model_list": [

resources/profiles/Anker.json

@@ -1,6 +1,6 @@
 {
     "name": "Anker",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Anker configurations",
     "machine_model_list": [

resources/profiles/Anycubic.json

@@ -1,6 +1,6 @@
 {
     "name": "Anycubic",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Anycubic configurations",
     "machine_model_list": [

resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.2 nozzle.json

@@ -36,21 +36,15 @@
     "bed_custom_texture": "",
     "bed_exclude_area": [
         "0x0",
-        "2.5x0",
-        "2.5x255",
-        "0x255",
-        "0x255",
-        "255x255",
-        "255x252.5",
-        "0x252.5",
-        "255x255",
-        "252.5x255",
-        "252.5x0",
         "255x0",
+        "255x255",
+        "0x255",
         "0x0",
-        "0x2.5",
+        "2x2",
-        "255x2.5",
+        "2x253",
-        "255x0"
+        "253x253",
+        "253x2",
+        "2x2"
     ],
     "bed_mesh_max": "0,0",
     "bed_mesh_min": "0,0",

resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.4 nozzle.json

@@ -36,21 +36,15 @@
     "bed_custom_texture": "",
     "bed_exclude_area": [
         "0x0",
-        "2.5x0",
-        "2.5x255",
-        "0x255",
-        "0x255",
-        "255x255",
-        "255x252.5",
-        "0x252.5",
-        "255x255",
-        "252.5x255",
-        "252.5x0",
         "255x0",
+        "255x255",
+        "0x255",
         "0x0",
-        "0x2.5",
+        "2x2",
-        "255x2.5",
+        "2x253",
-        "255x0"
+        "253x253",
+        "253x2",
+        "2x2"
     ],
     "bed_mesh_max": "0,0",
     "bed_mesh_min": "0,0",

resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.6 nozzle.json

@@ -36,21 +36,15 @@
     "bed_custom_texture": "",
     "bed_exclude_area": [
         "0x0",
-        "2.5x0",
-        "2.5x255",
-        "0x255",
-        "0x255",
-        "255x255",
-        "255x252.5",
-        "0x252.5",
-        "255x255",
-        "252.5x255",
-        "252.5x0",
         "255x0",
+        "255x255",
+        "0x255",
         "0x0",
-        "0x2.5",
+        "2x2",
-        "255x2.5",
+        "2x253",
-        "255x0"
+        "253x253",
+        "253x2",
+        "2x2"
     ],
     "bed_mesh_max": "0,0",
     "bed_mesh_min": "0,0",

resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.8 nozzle.json

@@ -36,21 +36,15 @@
     "bed_custom_texture": "",
     "bed_exclude_area": [
         "0x0",
-        "2.5x0",
-        "2.5x255",
-        "0x255",
-        "0x255",
-        "255x255",
-        "255x252.5",
-        "0x252.5",
-        "255x255",
-        "252.5x255",
-        "252.5x0",
         "255x0",
+        "255x255",
+        "0x255",
         "0x0",
-        "0x2.5",
+        "2x2",
-        "255x2.5",
+        "2x253",
-        "255x0"
+        "253x253",
+        "253x2",
+        "2x2"
     ],
     "bed_mesh_max": "0,0",
     "bed_mesh_min": "0,0",

resources/profiles/Artillery.json

@@ -1,6 +1,6 @@
 {
     "name": "Artillery",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Artillery configurations",
     "machine_model_list": [

resources/profiles/BIQU.json

@@ -1,6 +1,6 @@
 {
     "name": "BIQU",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "BIQU configurations",
     "machine_model_list": [

resources/profiles/Blocks.json

@@ -1,6 +1,6 @@
 {
     "name": "Blocks",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Blocks configurations",
     "machine_model_list": [

resources/profiles/CONSTRUCT3D.json

@@ -1,6 +1,6 @@
 {
     "name": "CONSTRUCT3D",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Construct3D configurations",
     "machine_model_list": [

resources/profiles/Chuanying.json

@@ -1,7 +1,7 @@
 {
     "name": "Chuanying",
     "url": "",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Chuanying configurations",
     "machine_model_list": [

resources/profiles/Co Print.json

@@ -1,6 +1,6 @@
 {
     "name": "Co Print",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "CoPrint configurations",
     "machine_model_list": [

resources/profiles/CoLiDo.json

@@ -1,6 +1,6 @@
 {
     "name": "CoLiDo",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "CoLiDo configurations",
     "machine_model_list": [

resources/profiles/Comgrow.json

@@ -1,6 +1,6 @@
 {
     "name": "Comgrow",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Comgrow configurations",
     "machine_model_list": [

resources/profiles/Creality.json

@@ -1,6 +1,6 @@
 {
     "name": "Creality",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Creality configurations",
     "machine_model_list": [

resources/profiles/Cubicon.json

@@ -1,6 +1,6 @@
 {
     "name": "Cubicon",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Cubicon configurations",
     "machine_model_list": [

resources/profiles/Custom.json

@@ -1,6 +1,6 @@
 {
     "name": "Custom Printer",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "My configurations",
     "machine_model_list": [

resources/profiles/DeltaMaker.json

@@ -1,7 +1,7 @@
 {
     "name": "DeltaMaker",
     "url": "",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "DeltaMaker configurations",
     "machine_model_list": [

resources/profiles/Dremel.json

@@ -1,6 +1,6 @@
 {
     "name": "Dremel",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Dremel configurations",
     "machine_model_list": [

resources/profiles/Elegoo.json

@@ -1,6 +1,6 @@
 {
     "name": "Elegoo",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Elegoo configurations",
     "machine_model_list": [

resources/profiles/Eryone.json

@@ -1,6 +1,6 @@
 {
     "name": "Thinker X400",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Eryone  configurations",
     "machine_model_list": [

resources/profiles/FLSun.json

@@ -1,6 +1,6 @@
 {
     "name": "FLSun",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "FLSun configurations",
     "machine_model_list": [

resources/profiles/Flashforge.json

@@ -1,7 +1,7 @@
 {
     "name": "Flashforge",
     "url": "",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Flashforge configurations",
     "machine_model_list": [

resources/profiles/FlyingBear.json

@@ -1,6 +1,6 @@
 {
     "name": "FlyingBear",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "1",
     "description": "FlyingBear configurations",
     "machine_model_list": [

resources/profiles/Folgertech.json

@@ -1,6 +1,6 @@
 {
     "name": "Folgertech",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Folgertech configurations",
     "machine_model_list": [

resources/profiles/Geeetech.json

@@ -1,6 +1,6 @@
 {
     "name": "Geeetech",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Geeetech configurations",
     "machine_model_list": [

resources/profiles/Ginger Additive.json

@@ -1,6 +1,6 @@
 {
     "name": "Ginger Additive",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "1",
     "description": "Ginger configuration",
     "machine_model_list": [

resources/profiles/InfiMech.json

@@ -1,6 +1,6 @@
 {
     "name": "InfiMech",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "1",
     "description": "InfiMech configurations",
     "machine_model_list": [

resources/profiles/Kingroon.json

@@ -1,7 +1,7 @@
 {
     "name": "Kingroon",
     "url": "https://kingroon.com/",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "1",
     "description": "Kingroon configuration files",
     "machine_model_list": [

resources/profiles/Lulzbot.json

@@ -1,7 +1,7 @@
 {
     "name": "Lulzbot",
     "url": "https://ohai.lulzbot.com/group/taz-6/",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Lulzbot configurations",
     "machine_model_list": [

resources/profiles/MagicMaker.json

@@ -1,6 +1,6 @@
 {
     "name": "MagicMaker",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "MagicMaker configurations",
     "machine_model_list": [

resources/profiles/Mellow.json

@@ -1,6 +1,6 @@
 {
     "name": "Mellow",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Mellow Printer Profiles",
     "machine_model_list": [

resources/profiles/OrcaArena.json

@@ -1,7 +1,7 @@
 {
     "name": "Orca Arena Printer",
     "url": "",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Orca Arena configuration files",
     "machine_model_list": [

resources/profiles/OrcaFilamentLibrary.json

@@ -1,6 +1,6 @@
 {
     "name": "OrcaFilamentLibrary",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Orca Filament Library",
     "filament_list": [

resources/profiles/Peopoly.json

@@ -1,6 +1,6 @@
 {
     "name": "Peopoly",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Peopoly configurations",
     "machine_model_list": [

resources/profiles/Phrozen.json

@@ -1,6 +1,6 @@
 {
     "name": "Phrozen",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Phrozen configurations",
     "machine_model_list": [

resources/profiles/Positron3D.json

@@ -1,6 +1,6 @@
 {
     "name": "Positron 3D",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Positron 3D Printer Profile",
     "machine_model_list": [

resources/profiles/Prusa.json

@@ -1,6 +1,6 @@
 {
     "name": "Prusa",
-    "version": "02.03.01.01",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Prusa configurations",
     "machine_model_list": [

resources/profiles/Qidi.json

@@ -1,6 +1,6 @@
 {
     "name": "Qidi",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Qidi configurations",
     "machine_model_list": [

resources/profiles/Raise3D.json

@@ -1,7 +1,7 @@
 {
     "name": "Raise3D",
     "url": "",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Raise3D configurations",
     "machine_model_list": [

resources/profiles/Ratrig.json

@@ -1,6 +1,6 @@
 {
     "name": "RatRig",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "RatRig configurations",
     "machine_model_list": [

resources/profiles/SecKit.json

@@ -1,6 +1,6 @@
 {
     "name": "SecKit",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "SecKit configurations",
     "machine_model_list": [

resources/profiles/Snapmaker.json

@@ -1,6 +1,6 @@
 {
     "name": "Snapmaker",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Snapmaker configurations",
     "machine_model_list": [

resources/profiles/Sovol.json

@@ -1,7 +1,7 @@
 {
     "name": "Sovol",
     "url": "",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Sovol configurations",
     "machine_model_list": [

resources/profiles/Tiertime.json

@@ -1,6 +1,6 @@
 {
     "name": "Tiertime",
-    "version": "02.03.01.01",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Tiertime configurations",
     "machine_model_list": [

resources/profiles/Tronxy.json

@@ -1,6 +1,6 @@
 {
     "name": "Tronxy",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Tronxy configurations",
     "machine_model_list": [

resources/profiles/TwoTrees.json

@@ -1,6 +1,6 @@
 {
     "name": "TwoTrees",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "1",
     "description": "TwoTrees configurations",
     "machine_model_list": [

resources/profiles/UltiMaker.json

@@ -1,7 +1,7 @@
 {
     "name": "UltiMaker",
     "url": "",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "UltiMaker configurations",
     "machine_model_list": [

resources/profiles/Vivedino.json

@@ -1,6 +1,6 @@
 {
     "name": "Vivedino",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Vivedino configurations",
     "machine_model_list": [

resources/profiles/Volumic.json

@@ -1,6 +1,6 @@
 {
     "name": "Volumic",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "1",
     "description": "VOLUMIC configurations",
     "machine_model_list": [

resources/profiles/Voron.json

@@ -1,6 +1,6 @@
 {
     "name": "Voron",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Voron configurations",
     "machine_model_list": [

resources/profiles/Voxelab.json

@@ -1,7 +1,7 @@
 {
     "name": "Voxelab",
     "url": "",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Voxelab configurations",
     "machine_model_list": [

resources/profiles/Vzbot.json

@@ -1,6 +1,6 @@
 {
     "name": "Vzbot",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Vzbot configurations",
     "machine_model_list": [

resources/profiles/Wanhao France.json

@@ -1,6 +1,6 @@
 {
     "name": "Wanhao France",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Wanhao France D12 configurations",
     "machine_model_list": [

resources/profiles/Wanhao.json

@@ -1,6 +1,6 @@
 {
     "name": "Wanhao",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Wanhao configurations",
     "machine_model_list": [

resources/profiles/WonderMaker.json

@@ -1,7 +1,7 @@
 {
     "name": "WonderMaker",
     "url": "",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "WonderMaker configurations",
     "machine_model_list": [

resources/profiles/Z-Bolt.json

@@ -1,7 +1,7 @@
 {
     "name": "Z-Bolt",
     "url": "",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "0",
     "description": "Z-Bolt configurations",
     "machine_model_list": [

resources/profiles/iQ.json

@@ -1,6 +1,6 @@
 {
     "name": "innovatiQ",
-    "version": "02.03.01.00",
+    "version": "02.03.01.10",
     "force_update": "1",
     "description": "innovatiQ configuration",
     "machine_model_list": [

version.inc

@@ -10,7 +10,7 @@ endif()
 if(NOT DEFINED BBL_INTERNAL_TESTING)
 set(BBL_INTERNAL_TESTING "0")
 endif()
-set(SoftFever_VERSION "2.3.1-beta")
+set(SoftFever_VERSION "2.3.1")
 string(REGEX MATCH "^([0-9]+)\\.([0-9]+)\\.([0-9]+)"
        SoftFever_VERSION_MATCH ${SoftFever_VERSION})
 set(ORCA_VERSION_MAJOR ${CMAKE_MATCH_1})