Various profile improvments (#4775)

* Add Prusa MINI profiles & fix image extension

* Add MINI & MK3S to generic filaments

* Change 0.2 to 0.25

* Change this one

* Fix this

* Fix nozzle diameters

* Forgot this...

localization/i18n/OrcaSlicer.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-23 13:08+0800\n"
+"POT-Creation-Date: 2024-03-29 21:10+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -10407,6 +10407,10 @@ msgstr ""
 msgid "Disable set remaining print time"
 msgstr ""
 
+msgid ""
+"Disable generating of the M73: Set remaining print time in the final gcode"
+msgstr ""
+
 msgid "Seam position"
 msgstr ""
 
@@ -10468,6 +10472,18 @@ msgid ""
 "The default value is 155°."
 msgstr ""
 
+msgid "Conditional overhang threshold"
+msgstr ""
+
+#, no-c-format, no-boost-format
+msgid ""
+"This option determines the overhang threshold for the application of scarf "
+"joint seams. If the unsupported portion of the perimeter is less than this "
+"threshold, scarf joint seams will be applied. The default threshold is set "
+"at 40% of the external wall's width. Due to performance considerations, the "
+"degree of overhang is estimated."
+msgstr ""
+
 msgid "Scarf joint speed"
 msgstr ""
 
@@ -13156,6 +13172,47 @@ msgid ""
 "Error: \"%2%\""
 msgstr ""
 
+msgid "Connected to Obico successfully!"
+msgstr ""
+
+msgid "Could not connect to Obico"
+msgstr ""
+
+msgid "Connected to SimplyPrint successfully!"
+msgstr ""
+
+msgid "Could not connect to SimplyPrint"
+msgstr ""
+
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
+msgid ""
+"File size exceeds the 100MB upload limit. Please upload your file through "
+"the panel."
+msgstr ""
+
+msgid "Unknown error"
+msgstr ""
+
+msgid "Connection to Flashforge works correctly."
+msgstr ""
+
+msgid "Could not connect to Flashforge"
+msgstr ""
+
+msgid "The provided state is not correct."
+msgstr ""
+
+msgid "Please give the required permissions when authorizing this application."
+msgstr ""
+
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr ""
+
+msgid "User cancelled."
+msgstr ""
+
 #: resources/data/hints.ini: [hint:Precise wall]
 msgid "Precise wall\nDid you know that turning on precise wall can improve precision and layer consistency?"
 msgstr ""

localization/i18n/ca/OrcaSlicer_ca.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-23 13:08+0800\n"
+"POT-Creation-Date: 2024-03-29 21:10+0800\n"
 "PO-Revision-Date: 2024-03-17 22:08+0100\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -11824,6 +11824,10 @@ msgstr "Mostra les marques de calibratge automàtic"
 msgid "Disable set remaining print time"
 msgstr "Desactivar el temps d'impressió restant"
 
+msgid ""
+"Disable generating of the M73: Set remaining print time in the final gcode"
+msgstr ""
+
 msgid "Seam position"
 msgstr "Posició de la costura"
 
@@ -11901,6 +11905,18 @@ msgstr ""
 "l'absència de cantonades afilades), s'utilitzarà una Unió en Bisell. El "
 "valor per defecte és de 155°."
 
+msgid "Conditional overhang threshold"
+msgstr ""
+
+#, no-c-format, no-boost-format
+msgid ""
+"This option determines the overhang threshold for the application of scarf "
+"joint seams. If the unsupported portion of the perimeter is less than this "
+"threshold, scarf joint seams will be applied. The default threshold is set "
+"at 40% of the external wall's width. Due to performance considerations, the "
+"degree of overhang is estimated."
+msgstr ""
+
 msgid "Scarf joint speed"
 msgstr "Velocitat d'Unió en Bisell"
 
@@ -15168,6 +15184,47 @@ msgstr ""
 "Cos del missatge: \"%1%\"\n"
 "Error: \"%2%\""
 
+msgid "Connected to Obico successfully!"
+msgstr ""
+
+msgid "Could not connect to Obico"
+msgstr ""
+
+msgid "Connected to SimplyPrint successfully!"
+msgstr ""
+
+msgid "Could not connect to SimplyPrint"
+msgstr ""
+
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
+msgid ""
+"File size exceeds the 100MB upload limit. Please upload your file through "
+"the panel."
+msgstr ""
+
+msgid "Unknown error"
+msgstr ""
+
+msgid "Connection to Flashforge works correctly."
+msgstr ""
+
+msgid "Could not connect to Flashforge"
+msgstr ""
+
+msgid "The provided state is not correct."
+msgstr ""
+
+msgid "Please give the required permissions when authorizing this application."
+msgstr ""
+
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr ""
+
+msgid "User cancelled."
+msgstr ""
+
 #: resources/data/hints.ini: [hint:Precise wall]
 msgid ""
 "Precise wall\n"

localization/i18n/cs/OrcaSlicer_cs.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-23 13:08+0800\n"
+"POT-Creation-Date: 2024-03-29 21:10+0800\n"
 "PO-Revision-Date: 2023-09-30 15:15+0200\n"
 "Last-Translator: René Mošner <Renemosner@seznam.cz>\n"
 "Language-Team: \n"
@@ -11350,6 +11350,10 @@ msgstr "Zobrazit automatické kalibrační značky"
 msgid "Disable set remaining print time"
 msgstr ""
 
+msgid ""
+"Disable generating of the M73: Set remaining print time in the final gcode"
+msgstr ""
+
 msgid "Seam position"
 msgstr "Pozice švu"
 
@@ -11417,6 +11421,18 @@ msgid ""
 "The default value is 155°."
 msgstr ""
 
+msgid "Conditional overhang threshold"
+msgstr ""
+
+#, no-c-format, no-boost-format
+msgid ""
+"This option determines the overhang threshold for the application of scarf "
+"joint seams. If the unsupported portion of the perimeter is less than this "
+"threshold, scarf joint seams will be applied. The default threshold is set "
+"at 40% of the external wall's width. Due to performance considerations, the "
+"degree of overhang is estimated."
+msgstr ""
+
 msgid "Scarf joint speed"
 msgstr ""
 
@@ -14430,6 +14446,47 @@ msgid ""
 "Error: \"%2%\""
 msgstr ""
 
+msgid "Connected to Obico successfully!"
+msgstr ""
+
+msgid "Could not connect to Obico"
+msgstr ""
+
+msgid "Connected to SimplyPrint successfully!"
+msgstr ""
+
+msgid "Could not connect to SimplyPrint"
+msgstr ""
+
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
+msgid ""
+"File size exceeds the 100MB upload limit. Please upload your file through "
+"the panel."
+msgstr ""
+
+msgid "Unknown error"
+msgstr ""
+
+msgid "Connection to Flashforge works correctly."
+msgstr ""
+
+msgid "Could not connect to Flashforge"
+msgstr ""
+
+msgid "The provided state is not correct."
+msgstr ""
+
+msgid "Please give the required permissions when authorizing this application."
+msgstr ""
+
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr ""
+
+msgid "User cancelled."
+msgstr ""
+
 #: resources/data/hints.ini: [hint:Precise wall]
 msgid ""
 "Precise wall\n"

localization/i18n/de/OrcaSlicer_de.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-23 13:08+0800\n"
+"POT-Creation-Date: 2024-03-29 21:10+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
 "Language-Team: \n"
@@ -8951,10 +8951,12 @@ msgid "Printer preset names"
 msgstr "Drucker Profilname"
 
 msgid "Use 3rd-party print host"
-msgstr ""
+msgstr "Benutze Drittanbieter-Druck-Hosts"
 
 msgid "Allow controlling BambuLab's printer through 3rd party print hosts"
 msgstr ""
+"Erlauben Sie die Steuerung von BambuLab-Druckern durch Drittanbieter-Druck-"
+"Hosts"
 
 msgid "Hostname, IP or URL"
 msgstr "Hostname, IP oder URL"
@@ -11901,6 +11903,12 @@ msgstr "Zeige automatische Kalibrierungsmarkierungen"
 msgid "Disable set remaining print time"
 msgstr "Deaktiviere die verbleibende Druckzeit"
 
+msgid ""
+"Disable generating of the M73: Set remaining print time in the final gcode"
+msgstr ""
+"Deaktiviert das Generieren von M73: Setze die verbleibende Druckzeit im "
+"endgültigen G-Code"
+
 msgid "Seam position"
 msgstr "Nahtposition"
 
@@ -11947,15 +11955,15 @@ msgstr ""
 "um das endgültige Produkt glatter und nahtloser aussehen zu lassen."
 
 msgid "Scarf joint seam (beta)"
-msgstr "Schaltnaht (Beta)"
+msgstr "Schrägnaht (Beta)"
 
 msgid "Use scarf joint to minimize seam visibility and increase seam strength."
 msgstr ""
-"Benutze Schaltnaht um die Sichtbarkeit der Naht zu minimieren und die "
+"Benutze die Schrägnaht um die Sichtbarkeit der Naht zu minimieren und die "
 "Nahtstärke zu erhöhen."
 
 msgid "Conditional scarf joint"
-msgstr "Bedingte Schaltnaht"
+msgstr "Bedingte Schrägnaht"
 
 msgid ""
 "Apply scarf joints only to smooth perimeters where traditional seams do not "
@@ -11975,13 +11983,25 @@ msgid ""
 "The default value is 155°."
 msgstr ""
 "Diese Option legt den Schwellenwinkel für das Anwenden einer bedingten "
-"Schaltnaht fest.\n"
+"Schrägnaht fest.\n"
 "Wenn der maximale Winkel innerhalb der Umfangsschleife diesen Wert "
 "überschreitet (was auf das Fehlen von scharfen Ecken hinweist), wird eine "
-"Schaltnaht verwendet. Der Standardwert beträgt 155°."
+"Schrägnaht verwendet. Der Standardwert beträgt 155°."
+
+msgid "Conditional overhang threshold"
+msgstr ""
+
+#, no-c-format, no-boost-format
+msgid ""
+"This option determines the overhang threshold for the application of scarf "
+"joint seams. If the unsupported portion of the perimeter is less than this "
+"threshold, scarf joint seams will be applied. The default threshold is set "
+"at 40% of the external wall's width. Due to performance considerations, the "
+"degree of overhang is estimated."
+msgstr ""
 
 msgid "Scarf joint speed"
-msgstr "Schaltnaht Geschwindigkeit"
+msgstr "Schrägnaht Geschwindigkeit"
 
 msgid ""
 "This option sets the printing speed for scarf joints. It is recommended to "
@@ -12006,7 +12026,7 @@ msgstr ""
 "ist auf 100% eingestellt."
 
 msgid "Scarf joint flow ratio"
-msgstr "Schaltnaht Flussverhältnis"
+msgstr "Schrägnaht Flussverhältnis"
 
 msgid "This factor affects the amount of material for scarf joints."
 msgstr "Dieser Faktor beeinflusst die Menge an Material für Schaltnähte."
@@ -12019,38 +12039,38 @@ msgid ""
 "This amount can be specified in millimeters or as a percentage of the "
 "current layer height. The default value for this parameter is 0."
 msgstr ""
-"Start Höhe des Schaltnaht.\n"
+"Start Höhe der Schrägnaht.\n"
 "Diese Menge kann in Millimetern oder als Prozentsatz der aktuellen "
 "Schichthöhe angegeben werden.\n"
 "Der Standardwert für diesen Parameter beträgt 0."
 
 msgid "Scarf around entire wall"
-msgstr "Schaltnaht um die gesamte Wand"
+msgstr "Schrägnaht um die gesamte Wand"
 
 msgid "The scarf extends to the entire length of the wall."
-msgstr "Die Schaltnaht erstreckt sich über die gesamte Länge der Wand."
+msgstr "Die Schrägnaht erstreckt sich über die gesamte Länge der Wand."
 
 msgid "Scarf length"
-msgstr "Länge der Schaltnaht"
+msgstr "Länge der Schrägnaht"
 
 msgid ""
 "Length of the scarf. Setting this parameter to zero effectively disables the "
 "scarf."
 msgstr ""
-"Länge der Schaltnaht. Das Einstellen dieses Parameters auf Null deaktiviert "
+"Länge der Schrägnaht. Das Einstellen dieses Parameters auf Null deaktiviert "
-"effektiv die Schaltnaht."
+"effektiv die Schrägnaht."
 
 msgid "Scarf steps"
-msgstr "Schaltnaht Schritte"
+msgstr "Schrägnaht Schritte"
 
 msgid "Minimum number of segments of each scarf."
-msgstr "Mindestanzahl von Segmenten jeder Schaltnaht."
+msgstr "Mindestanzahl von Segmenten jeder Schrägnaht."
 
 msgid "Scarf joint for inner walls"
-msgstr "Schaltnaht für innere Wände"
+msgstr "Schrägnaht für innere Wände"
 
 msgid "Use scarf joint for inner walls as well."
-msgstr "Verwenden Sie Schaltnaht auch für innere Wände."
+msgstr "Verwenden Sie Schrägnaht auch für innere Wände."
 
 msgid "Role base wipe speed"
 msgstr "Rollenbasierte Wipe Geschwindigkeit"
@@ -15081,7 +15101,7 @@ msgid "Success!"
 msgstr "Erfolgreich!"
 
 msgid "Are you sure to log out?"
-msgstr ""
+msgstr "Sind Sie sicher, dass Sie sich abmelden möchten?"
 
 msgid "Refresh Printers"
 msgstr "Drucker aktualisieren"
@@ -15115,7 +15135,7 @@ msgstr ""
 "CA-Datei in den Zertifikatspeicher / das Schlüsselbund."
 
 msgid "Login/Test"
-msgstr ""
+msgstr "Login/Test"
 
 msgid "Connection to printers connected via the print host failed."
 msgstr ""
@@ -15256,6 +15276,55 @@ msgstr ""
 "Nachrichtentext: \"%1%\"\n"
 "Fehler: \"%2%\""
 
+msgid "Connected to Obico successfully!"
+msgstr "Erfolgreich mit Obico verbunden!"
+
+msgid "Could not connect to Obico"
+msgstr "Konnte keine Verbindung zu Obico herstellen"
+
+msgid "Connected to SimplyPrint successfully!"
+msgstr "Erfolgreich mit SimplyPrint verbunden!"
+
+msgid "Could not connect to SimplyPrint"
+msgstr "Konnte keine Verbindung zu SimplyPrint herstellen"
+
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+"SimplyPrint-Konto nicht verknüpft. Gehen Sie zu den Verbindungsoptionen, um "
+"es einzurichten."
+
+msgid ""
+"File size exceeds the 100MB upload limit. Please upload your file through "
+"the panel."
+msgstr ""
+"Die Dateigröße überschreitet das 100-MB-Upload-Limit. Bitte laden Sie Ihre "
+"Datei über das Panel hoch."
+
+msgid "Unknown error"
+msgstr "Unbekannter Fehler"
+
+msgid "Connection to Flashforge works correctly."
+msgstr "Verbindung zu Flashforge funktioniert korrekt."
+
+msgid "Could not connect to Flashforge"
+msgstr "Konnte keine Verbindung zu Flashforge herstellen"
+
+msgid "The provided state is not correct."
+msgstr "Der bereitgestellte Status ist nicht korrekt."
+
+msgid "Please give the required permissions when authorizing this application."
+msgstr ""
+"Bitte geben Sie die erforderlichen Berechtigungen an, wenn Sie diese "
+"Anwendung autorisieren."
+
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr ""
+"Es ist etwas Unerwartetes passiert, als Sie versucht haben, sich anzumelden. "
+"Bitte versuchen Sie es erneut."
+
+msgid "User cancelled."
+msgstr "Benutzer abgebrochen."
+
 #: resources/data/hints.ini: [hint:Precise wall]
 msgid ""
 "Precise wall\n"
@@ -15649,6 +15718,9 @@ msgstr ""
 "wie z.B. ABS, durch eine entsprechende Erhöhung der Heizbetttemperatur die "
 "Wahrscheinlichkeit von Verwerfungen verringert werden kann."
 
+#~ msgid "Timeout when authenticating with the account server."
+#~ msgstr "Zeitüberschreitung bei der Authentifizierung mit dem Kontoserver."
+
 #~ msgid "Studio Version:"
 #~ msgstr "Studio Version:"
 

localization/i18n/en/OrcaSlicer_en.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-23 13:08+0800\n"
+"POT-Creation-Date: 2024-03-29 21:10+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -10985,6 +10985,10 @@ msgstr ""
 msgid "Disable set remaining print time"
 msgstr ""
 
+msgid ""
+"Disable generating of the M73: Set remaining print time in the final gcode"
+msgstr ""
+
 msgid "Seam position"
 msgstr "Seam position"
 
@@ -11046,6 +11050,18 @@ msgid ""
 "The default value is 155°."
 msgstr ""
 
+msgid "Conditional overhang threshold"
+msgstr ""
+
+#, no-c-format, no-boost-format
+msgid ""
+"This option determines the overhang threshold for the application of scarf "
+"joint seams. If the unsupported portion of the perimeter is less than this "
+"threshold, scarf joint seams will be applied. The default threshold is set "
+"at 40% of the external wall's width. Due to performance considerations, the "
+"degree of overhang is estimated."
+msgstr ""
+
 msgid "Scarf joint speed"
 msgstr ""
 
@@ -13865,6 +13881,47 @@ msgid ""
 "Error: \"%2%\""
 msgstr ""
 
+msgid "Connected to Obico successfully!"
+msgstr ""
+
+msgid "Could not connect to Obico"
+msgstr ""
+
+msgid "Connected to SimplyPrint successfully!"
+msgstr ""
+
+msgid "Could not connect to SimplyPrint"
+msgstr ""
+
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
+msgid ""
+"File size exceeds the 100MB upload limit. Please upload your file through "
+"the panel."
+msgstr ""
+
+msgid "Unknown error"
+msgstr ""
+
+msgid "Connection to Flashforge works correctly."
+msgstr ""
+
+msgid "Could not connect to Flashforge"
+msgstr ""
+
+msgid "The provided state is not correct."
+msgstr ""
+
+msgid "Please give the required permissions when authorizing this application."
+msgstr ""
+
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr ""
+
+msgid "User cancelled."
+msgstr ""
+
 #: resources/data/hints.ini: [hint:Precise wall]
 msgid ""
 "Precise wall\n"

localization/i18n/es/OrcaSlicer_es.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-23 13:08+0800\n"
+"POT-Creation-Date: 2024-03-29 21:10+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Carlos Fco. Caruncho Serrano <puzzlero@gmail.com>\n"
 "Language-Team: \n"
@@ -3436,6 +3436,8 @@ msgid ""
 "Alternate extra wall does't work well when ensure vertical shell thickness "
 "is set to All. "
 msgstr ""
+"La pared adicional alternativa no funciona bien cuando el grosor del "
+"perímetro vertical se establece en Todos."
 
 msgid ""
 "Change these settings automatically? \n"
@@ -3443,6 +3445,10 @@ msgid ""
 "alternate extra wall\n"
 "No  - Dont use alternate extra wall"
 msgstr ""
+"¿Cambiar estos ajustes automáticamente?\n"
+"Sí - Cambie el grosor del perímetro vertical a Moderado y active la pared "
+"adicional alternativa\n"
+"No - No utilizar la pared adicional alternativa"
 
 msgid ""
 "Prime tower does not work when Adaptive Layer Height or Independent Support "
@@ -3493,6 +3499,8 @@ msgid ""
 "seam_slope_start_height need to be smaller than layer_height.\n"
 "Reset to 0."
 msgstr ""
+"seam_slope_start_height debe ser menor que layer_height.\n"
+"Restablecer a 0."
 
 msgid "Auto bed leveling"
 msgstr "Nivelación de cama automática"
@@ -6196,7 +6204,7 @@ msgid "Stealth Mode"
 msgstr "Modo invisible"
 
 msgid "Enable network plugin"
-msgstr ""
+msgstr "Activar el plugin de red"
 
 msgid "Check for stable updates only"
 msgstr "Buscar sólo actualizaciones estables"
@@ -6256,7 +6264,7 @@ msgid "If enabled, auto-calculate everytime the color changed."
 msgstr "Si está activado, auto calcula en cada cambio de color."
 
 msgid "Network"
-msgstr ""
+msgstr "Red"
 
 msgid "Auto sync user presets(Printer/Filament/Process)"
 msgstr ""
@@ -8800,6 +8808,12 @@ msgid ""
 "You can adjust the machine_max_acceleration_travel value in your printer's "
 "configuration to get higher speeds."
 msgstr ""
+"El ajuste de aceleración de desplazamiento supera la aceleración máxima de "
+"desplazamiento de la impresora (machine_max_acceleration_travel).\n"
+"Orca limitará automáticamente la velocidad de aceleración de desplazamiento "
+"para garantizar que no supere las capacidades de la impresora.\n"
+"Puede ajustar el valor de machine_max_acceleration_travel en la "
+"configuración de la impresora para obtener velocidades más altas."
 
 msgid "Generating skirt & brim"
 msgstr "Generando falda y borde de adherencia"
@@ -8886,10 +8900,12 @@ msgid "Printer preset names"
 msgstr "Nombres de perfiles de la impresora"
 
 msgid "Use 3rd-party print host"
-msgstr ""
+msgstr "Utilizar host de impresión de terceros"
 
 msgid "Allow controlling BambuLab's printer through 3rd party print hosts"
 msgstr ""
+"Permitir el control de la impresora de BambuLab a través de hosts de "
+"impresión de terceros"
 
 msgid "Hostname, IP or URL"
 msgstr "Nombre de host, IP o URL"
@@ -11851,6 +11867,10 @@ msgstr "Muestra marcas de autocalibración"
 msgid "Disable set remaining print time"
 msgstr "Desactivar tiempo de impresión restante"
 
+msgid ""
+"Disable generating of the M73: Set remaining print time in the final gcode"
+msgstr ""
+
 msgid "Seam position"
 msgstr "Posición de la costura"
 
@@ -11894,15 +11914,15 @@ msgstr ""
 "diámetro actual del extrusor. El valor por defecto de este parámetro es 10%."
 
 msgid "Scarf joint seam (beta)"
-msgstr "Costura de unión de espiga (beta)"
+msgstr "Costura de unión de bufanda (beta)"
 
 msgid "Use scarf joint to minimize seam visibility and increase seam strength."
 msgstr ""
-"Utilice la unión de espiga para minimizar la visibilidad de la costura y "
+"Utilice la unión de bufanda para minimizar la visibilidad de la costura y "
 "aumentar su resistencia."
 
 msgid "Conditional scarf joint"
-msgstr "Unión de espiga condicional"
+msgstr "Unión de bufanda condicional"
 
 msgid ""
 "Apply scarf joints only to smooth perimeters where traditional seams do not "
@@ -11922,12 +11942,24 @@ msgid ""
 "The default value is 155°."
 msgstr ""
 "Esta opción establece el ángulo umbral para aplicar una costura de unión de "
-"espiga condicional. Si el ángulo máximo dentro del bucle perimetral supera "
+"bufanda condicional. Si el ángulo máximo dentro del bucle perimetral supera "
 "este valor (indicando la ausencia de esquinas finas), se utilizará una "
-"costura de unión de espiga. El valor por defecto es 155°."
+"costura de unión de bufanda. El valor por defecto es 155°."
+
+msgid "Conditional overhang threshold"
+msgstr ""
+
+#, no-c-format, no-boost-format
+msgid ""
+"This option determines the overhang threshold for the application of scarf "
+"joint seams. If the unsupported portion of the perimeter is less than this "
+"threshold, scarf joint seams will be applied. The default threshold is set "
+"at 40% of the external wall's width. Due to performance considerations, the "
+"degree of overhang is estimated."
+msgstr ""
 
 msgid "Scarf joint speed"
-msgstr "Velocidad de unión de espiga"
+msgstr "Velocidad de unión de bufanda"
 
 msgid ""
 "This option sets the printing speed for scarf joints. It is recommended to "
@@ -11939,8 +11971,8 @@ msgid ""
 "percentage (e.g., 80%), the speed is calculated based on the respective "
 "outer or inner wall speed. The default value is set to 100%."
 msgstr ""
-"Esta opción ajusta la velocidad de impresión para las uniones de espiga. Se "
+"Esta opción ajusta la velocidad de impresión para las uniones de bufanda. Se "
-"recomienda imprimir las uniones de espiga a una velocidad lenta (inferior a "
+"recomienda imprimir las uniones de bufanda a una velocidad lenta (inferior a "
 "100 mm/s).  También es aconsejable activar la opción \"Suavizado de la "
 "velocidad de extrusión\" si la velocidad ajustada varía significativamente "
 "de la velocidad de las paredes exteriores o interiores. Si la velocidad "
@@ -11951,21 +11983,21 @@ msgstr ""
 "predeterminado es 100%."
 
 msgid "Scarf joint flow ratio"
-msgstr "Relación de caudal de la unión de espiga"
+msgstr "Relación de caudal de la unión de bufanda"
 
 msgid "This factor affects the amount of material for scarf joints."
 msgstr ""
-"Este factor afecta a la cantidad de material para las uniones de espiga."
+"Este factor afecta a la cantidad de material para las uniones de bufanda."
 
 msgid "Scarf start height"
-msgstr "Altura de inicio de la espiga"
+msgstr "Altura de inicio de la bufanda"
 
 msgid ""
 "Start height of the scarf.\n"
 "This amount can be specified in millimeters or as a percentage of the "
 "current layer height. The default value for this parameter is 0."
 msgstr ""
-"Altura inicial de la espiga . Esta cantidad puede especificarse en "
+"Altura inicial de la bufanda . Esta cantidad puede especificarse en "
 "milímetros o como porcentaje de la altura actual de la capa. El valor por "
 "defecto de este parámetro es 0."
 
@@ -11973,29 +12005,29 @@ msgid "Scarf around entire wall"
 msgstr "Espiga alrededor de toda la pared"
 
 msgid "The scarf extends to the entire length of the wall."
-msgstr "La espiga se extiende a lo largo de toda la pared."
+msgstr "La bufanda se extiende a lo largo de toda la pared."
 
 msgid "Scarf length"
-msgstr "Largo de la espiga"
+msgstr "Largo de la bufanda"
 
 msgid ""
 "Length of the scarf. Setting this parameter to zero effectively disables the "
 "scarf."
 msgstr ""
-"Longitud de la espiga. Si este parámetro se pone a cero, se desactiva la "
+"Longitud de la bufanda. Si este parámetro se pone a cero, se desactiva la "
-"espiga."
+"bufanda."
 
 msgid "Scarf steps"
 msgstr "Pasos de la bufanda"
 
 msgid "Minimum number of segments of each scarf."
-msgstr "Número mínimo de segmentos de cada espiga."
+msgstr "Número mínimo de segmentos de cada bufanda."
 
 msgid "Scarf joint for inner walls"
-msgstr "Junta de espiga para paredes interiores"
+msgstr "Junta de bufanda para paredes interiores"
 
 msgid "Use scarf joint for inner walls as well."
-msgstr "Utilice también una junta de espiga para las paredes interiores."
+msgstr "Utilice también una junta de bufanda para las paredes interiores."
 
 msgid "Role base wipe speed"
 msgstr "Velocidad de limpieza según tipo de línea"
@@ -14469,7 +14501,7 @@ msgid "Export Log"
 msgstr "Exportar Registro"
 
 msgid "OrcaSlicer Version:"
-msgstr ""
+msgstr "OrcaSlicer Versión:"
 
 msgid "System Version:"
 msgstr "Versión de Sistema:"
@@ -14478,10 +14510,10 @@ msgid "DNS Server:"
 msgstr "Servidor DNS:"
 
 msgid "Test OrcaSlicer(GitHub)"
-msgstr ""
+msgstr "Prueba OrcaSlicer(GitHub)"
 
 msgid "Test OrcaSlicer(GitHub):"
-msgstr ""
+msgstr "Prueba OrcaSlicer(GitHub):"
 
 msgid "Test Bing.com"
 msgstr "Prueba Bing.com"
@@ -15030,7 +15062,7 @@ msgid "Success!"
 msgstr "¡Exitoso!"
 
 msgid "Are you sure to log out?"
-msgstr ""
+msgstr "¿Estás seguro de cerrar la sesión?"
 
 msgid "Refresh Printers"
 msgstr "Refrescar Impresoras"
@@ -15065,7 +15097,7 @@ msgstr ""
 "Almacén de certificados / Llavero."
 
 msgid "Login/Test"
-msgstr ""
+msgstr "Inicio de sesión/Prueba"
 
 msgid "Connection to printers connected via the print host failed."
 msgstr ""
@@ -15206,6 +15238,47 @@ msgstr ""
 "Cuerpo del mensaje: \"%1%\" \n"
 "Error: \"%2%\""
 
+msgid "Connected to Obico successfully!"
+msgstr ""
+
+msgid "Could not connect to Obico"
+msgstr ""
+
+msgid "Connected to SimplyPrint successfully!"
+msgstr ""
+
+msgid "Could not connect to SimplyPrint"
+msgstr ""
+
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
+msgid ""
+"File size exceeds the 100MB upload limit. Please upload your file through "
+"the panel."
+msgstr ""
+
+msgid "Unknown error"
+msgstr ""
+
+msgid "Connection to Flashforge works correctly."
+msgstr ""
+
+msgid "Could not connect to Flashforge"
+msgstr ""
+
+msgid "The provided state is not correct."
+msgstr ""
+
+msgid "Please give the required permissions when authorizing this application."
+msgstr ""
+
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr ""
+
+msgid "User cancelled."
+msgstr ""
+
 #: resources/data/hints.ini: [hint:Precise wall]
 msgid ""
 "Precise wall\n"

localization/i18n/fr/OrcaSlicer_fr.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-23 13:08+0800\n"
+"POT-Creation-Date: 2024-03-29 21:10+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: Guislain Cyril, Thomas Lété\n"
@@ -7208,8 +7208,8 @@ msgstr "Ignorer"
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
+"by right-click the empty position of build plate and choose \"Add Primitive"
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Lorsque vous enregistrez un timelapse sans tête d’outil, il est recommandé "
 "d’ajouter une \"Tour d’essuyage timelapse\".\n"
@@ -7361,9 +7361,9 @@ msgid ""
 "Bed temperature when cool plate is installed. Value 0 means the filament "
 "does not support to print on the Cool Plate"
 msgstr ""
-"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool "
+"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool plate"
-"plate\") est installé. Une valeur à 0 signifie que ce filament ne peut pas "
+"\") est installé. Une valeur à 0 signifie que ce filament ne peut pas être "
-"être imprimé sur le plateau froid."
+"imprimé sur le plateau froid."
 
 msgid "Engineering plate"
 msgstr "Plaque Engineering"
@@ -10811,10 +10811,10 @@ msgstr "Ventilateur à pleine vitesse à la couche"
 
 msgid ""
 "Fan speed will be ramped up linearly from zero at layer "
-"\"close_fan_the_first_x_layers\" to maximum at layer "
+"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
-"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
+"\". \"full_fan_speed_layer\" will be ignored if lower than "
-"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
+"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
-"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
+"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
 msgstr ""
 "La vitesse du ventilateur augmentera de manière linéaire à partir de zéro à "
 "la couche \"close_fan_the_first_x_layers\" jusqu’au maximum à la couche "
@@ -11989,6 +11989,10 @@ msgstr "Afficher les marques de calibration"
 msgid "Disable set remaining print time"
 msgstr "Désactiver le réglage du temps d’impression restant"
 
+msgid ""
+"Disable generating of the M73: Set remaining print time in the final gcode"
+msgstr ""
+
 msgid "Seam position"
 msgstr "Position de la couture"
 
@@ -12067,6 +12071,18 @@ msgstr ""
 "valeur (indiquant l’absence d’angles vifs), une couture en biseau sera "
 "utilisée. La valeur par défaut est de 155°."
 
+msgid "Conditional overhang threshold"
+msgstr ""
+
+#, no-c-format, no-boost-format
+msgid ""
+"This option determines the overhang threshold for the application of scarf "
+"joint seams. If the unsupported portion of the perimeter is less than this "
+"threshold, scarf joint seams will be applied. The default threshold is set "
+"at 40% of the external wall's width. Due to performance considerations, the "
+"degree of overhang is estimated."
+msgstr ""
+
 msgid "Scarf joint speed"
 msgstr "Vitesse de la couture en biseau"
 
@@ -14003,9 +14019,9 @@ msgstr ""
 "Wiki.\n"
 "\n"
 "Habituellement, la calibration est inutile. Lorsque vous démarrez une "
-"impression d'une seule couleur/matériau, avec l'option \"Calibration du "
+"impression d'une seule couleur/matériau, avec l'option \"Calibration du débit"
-"débit\" cochée dans le menu de démarrage de l'impression, l'imprimante "
+"\" cochée dans le menu de démarrage de l'impression, l'imprimante suivra "
-"suivra l'ancienne méthode de calibration du filament avant l'impression.\n"
+"l'ancienne méthode de calibration du filament avant l'impression.\n"
 "Lorsque vous démarrez une impression multi-couleurs/matériaux, l'imprimante "
 "utilise le paramètre de compensation par défaut pour le filament lors de "
 "chaque changement de filament, ce qui donne un bon résultat dans la plupart "
@@ -14762,8 +14778,8 @@ msgstr ""
 "Voulez-vous le réécrire ?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"selected\". \n"
+"\". \n"
 "To add preset for more printers, Please go to printer selection"
 msgstr ""
 "Nous renommerions les préréglages en « Vendor Type Serial @printer you "
@@ -15380,6 +15396,47 @@ msgstr ""
 "Corps du message : « %1% »\n"
 "Erreur : « %2% »"
 
+msgid "Connected to Obico successfully!"
+msgstr ""
+
+msgid "Could not connect to Obico"
+msgstr ""
+
+msgid "Connected to SimplyPrint successfully!"
+msgstr ""
+
+msgid "Could not connect to SimplyPrint"
+msgstr ""
+
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
+msgid ""
+"File size exceeds the 100MB upload limit. Please upload your file through "
+"the panel."
+msgstr ""
+
+msgid "Unknown error"
+msgstr ""
+
+msgid "Connection to Flashforge works correctly."
+msgstr ""
+
+msgid "Could not connect to Flashforge"
+msgstr ""
+
+msgid "The provided state is not correct."
+msgstr ""
+
+msgid "Please give the required permissions when authorizing this application."
+msgstr ""
+
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr ""
+
+msgid "User cancelled."
+msgstr ""
+
 #: resources/data/hints.ini: [hint:Precise wall]
 msgid ""
 "Precise wall\n"
@@ -15853,8 +15910,8 @@ msgstr ""
 #~ "thickness (top+bottom solid layers)"
 #~ msgstr ""
 #~ "Ajoutez du remplissage solide à proximité des surfaces inclinées pour "
-#~ "garantir l'épaisseur verticale de la coque (couches solides "
+#~ "garantir l'épaisseur verticale de la coque (couches solides supérieure"
-#~ "supérieure+inférieure)."
+#~ "+inférieure)."
 
 #~ msgid "Further reduce solid infill on walls (beta)"
 #~ msgstr "Réduire davantage le remplissage solide des parois (expérimental)"

localization/i18n/hu/OrcaSlicer_hu.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-23 13:08+0800\n"
+"POT-Creation-Date: 2024-03-29 21:10+0800\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -11064,6 +11064,10 @@ msgstr ""
 msgid "Disable set remaining print time"
 msgstr ""
 
+msgid ""
+"Disable generating of the M73: Set remaining print time in the final gcode"
+msgstr ""
+
 msgid "Seam position"
 msgstr "Varrat pozíció"
 
@@ -11125,6 +11129,18 @@ msgid ""
 "The default value is 155°."
 msgstr ""
 
+msgid "Conditional overhang threshold"
+msgstr ""
+
+#, no-c-format, no-boost-format
+msgid ""
+"This option determines the overhang threshold for the application of scarf "
+"joint seams. If the unsupported portion of the perimeter is less than this "
+"threshold, scarf joint seams will be applied. The default threshold is set "
+"at 40% of the external wall's width. Due to performance considerations, the "
+"degree of overhang is estimated."
+msgstr ""
+
 msgid "Scarf joint speed"
 msgstr ""
 
@@ -13957,6 +13973,47 @@ msgid ""
 "Error: \"%2%\""
 msgstr ""
 
+msgid "Connected to Obico successfully!"
+msgstr ""
+
+msgid "Could not connect to Obico"
+msgstr ""
+
+msgid "Connected to SimplyPrint successfully!"
+msgstr ""
+
+msgid "Could not connect to SimplyPrint"
+msgstr ""
+
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
+msgid ""
+"File size exceeds the 100MB upload limit. Please upload your file through "
+"the panel."
+msgstr ""
+
+msgid "Unknown error"
+msgstr ""
+
+msgid "Connection to Flashforge works correctly."
+msgstr ""
+
+msgid "Could not connect to Flashforge"
+msgstr ""
+
+msgid "The provided state is not correct."
+msgstr ""
+
+msgid "Please give the required permissions when authorizing this application."
+msgstr ""
+
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr ""
+
+msgid "User cancelled."
+msgstr ""
+
 #: resources/data/hints.ini: [hint:Precise wall]
 msgid ""
 "Precise wall\n"

localization/i18n/ja/OrcaSlicer_ja.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-23 13:08+0800\n"
+"POT-Creation-Date: 2024-03-29 21:10+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -10749,6 +10749,10 @@ msgstr ""
 msgid "Disable set remaining print time"
 msgstr ""
 
+msgid ""
+"Disable generating of the M73: Set remaining print time in the final gcode"
+msgstr ""
+
 msgid "Seam position"
 msgstr "継ぎ目位置"
 
@@ -10810,6 +10814,18 @@ msgid ""
 "The default value is 155°."
 msgstr ""
 
+msgid "Conditional overhang threshold"
+msgstr ""
+
+#, no-c-format, no-boost-format
+msgid ""
+"This option determines the overhang threshold for the application of scarf "
+"joint seams. If the unsupported portion of the perimeter is less than this "
+"threshold, scarf joint seams will be applied. The default threshold is set "
+"at 40% of the external wall's width. Due to performance considerations, the "
+"degree of overhang is estimated."
+msgstr ""
+
 msgid "Scarf joint speed"
 msgstr ""
 
@@ -13582,6 +13598,47 @@ msgid ""
 "Error: \"%2%\""
 msgstr ""
 
+msgid "Connected to Obico successfully!"
+msgstr ""
+
+msgid "Could not connect to Obico"
+msgstr ""
+
+msgid "Connected to SimplyPrint successfully!"
+msgstr ""
+
+msgid "Could not connect to SimplyPrint"
+msgstr ""
+
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
+msgid ""
+"File size exceeds the 100MB upload limit. Please upload your file through "
+"the panel."
+msgstr ""
+
+msgid "Unknown error"
+msgstr ""
+
+msgid "Connection to Flashforge works correctly."
+msgstr ""
+
+msgid "Could not connect to Flashforge"
+msgstr ""
+
+msgid "The provided state is not correct."
+msgstr ""
+
+msgid "Please give the required permissions when authorizing this application."
+msgstr ""
+
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr ""
+
+msgid "User cancelled."
+msgstr ""
+
 #: resources/data/hints.ini: [hint:Precise wall]
 msgid ""
 "Precise wall\n"

localization/i18n/ko/OrcaSlicer_ko.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-23 13:08+0800\n"
+"POT-Creation-Date: 2024-03-29 21:10+0800\n"
 "PO-Revision-Date: 2024-03-15 23:12+0900\n"
 "Last-Translator: Hotsolidinfill <138652683+Hotsolidinfill@users.noreply."
 "github.com>, crwusiz <crwusiz@naver.com>\n"
@@ -11358,6 +11358,10 @@ msgstr "자동 교정 기호 표시"
 msgid "Disable set remaining print time"
 msgstr "설정된 남은 출력 시간 비활성화"
 
+msgid ""
+"Disable generating of the M73: Set remaining print time in the final gcode"
+msgstr ""
+
 msgid "Seam position"
 msgstr "솔기 위치"
 
@@ -11431,6 +11435,18 @@ msgstr ""
 "주변 루프 내의 최대 각도가 이 값을 초과하는 경우(뾰족한 모서리가 없음을 나타"
 "냄) 스카프 조인트 솔기가 사용됩니다. 기본값은 155°입니다."
 
+msgid "Conditional overhang threshold"
+msgstr ""
+
+#, no-c-format, no-boost-format
+msgid ""
+"This option determines the overhang threshold for the application of scarf "
+"joint seams. If the unsupported portion of the perimeter is less than this "
+"threshold, scarf joint seams will be applied. The default threshold is set "
+"at 40% of the external wall's width. Due to performance considerations, the "
+"degree of overhang is estimated."
+msgstr ""
+
 msgid "Scarf joint speed"
 msgstr "스카프 조인트 속도"
 
@@ -14508,6 +14524,47 @@ msgstr ""
 "메시지 본문: \"%1%\"\n"
 "오류: \"%2%\""
 
+msgid "Connected to Obico successfully!"
+msgstr ""
+
+msgid "Could not connect to Obico"
+msgstr ""
+
+msgid "Connected to SimplyPrint successfully!"
+msgstr ""
+
+msgid "Could not connect to SimplyPrint"
+msgstr ""
+
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
+msgid ""
+"File size exceeds the 100MB upload limit. Please upload your file through "
+"the panel."
+msgstr ""
+
+msgid "Unknown error"
+msgstr ""
+
+msgid "Connection to Flashforge works correctly."
+msgstr ""
+
+msgid "Could not connect to Flashforge"
+msgstr ""
+
+msgid "The provided state is not correct."
+msgstr ""
+
+msgid "Please give the required permissions when authorizing this application."
+msgstr ""
+
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr ""
+
+msgid "User cancelled."
+msgstr ""
+
 #: resources/data/hints.ini: [hint:Precise wall]
 msgid ""
 "Precise wall\n"

localization/i18n/list.txt

@@ -159,3 +159,8 @@ src/slic3r/Utils/FlashAir.cpp
 src/slic3r/Utils/MKS.cpp
 src/slic3r/Utils/OctoPrint.cpp
 src/slic3r/Utils/Repetier.cpp
+src/slic3r/Utils/Obico.cpp
+src/slic3r/Utils/SimplyPrint.cpp
+src/slic3r/Utils/Flashforge.cpp
+src/slic3r/GUI/Jobs/OAuthJob.cpp
+src/slic3r/GUI/BackgroundSlicingProcess.cpp

localization/i18n/nl/OrcaSlicer_nl.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-23 13:08+0800\n"
+"POT-Creation-Date: 2024-03-29 21:10+0800\n"
 "Language: nl\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -11169,6 +11169,10 @@ msgstr ""
 msgid "Disable set remaining print time"
 msgstr ""
 
+msgid ""
+"Disable generating of the M73: Set remaining print time in the final gcode"
+msgstr ""
+
 msgid "Seam position"
 msgstr "Naad positie"
 
@@ -11230,6 +11234,18 @@ msgid ""
 "The default value is 155°."
 msgstr ""
 
+msgid "Conditional overhang threshold"
+msgstr ""
+
+#, no-c-format, no-boost-format
+msgid ""
+"This option determines the overhang threshold for the application of scarf "
+"joint seams. If the unsupported portion of the perimeter is less than this "
+"threshold, scarf joint seams will be applied. The default threshold is set "
+"at 40% of the external wall's width. Due to performance considerations, the "
+"degree of overhang is estimated."
+msgstr ""
+
 msgid "Scarf joint speed"
 msgstr ""
 
@@ -14071,6 +14087,47 @@ msgid ""
 "Error: \"%2%\""
 msgstr ""
 
+msgid "Connected to Obico successfully!"
+msgstr ""
+
+msgid "Could not connect to Obico"
+msgstr ""
+
+msgid "Connected to SimplyPrint successfully!"
+msgstr ""
+
+msgid "Could not connect to SimplyPrint"
+msgstr ""
+
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
+msgid ""
+"File size exceeds the 100MB upload limit. Please upload your file through "
+"the panel."
+msgstr ""
+
+msgid "Unknown error"
+msgstr ""
+
+msgid "Connection to Flashforge works correctly."
+msgstr ""
+
+msgid "Could not connect to Flashforge"
+msgstr ""
+
+msgid "The provided state is not correct."
+msgstr ""
+
+msgid "Please give the required permissions when authorizing this application."
+msgstr ""
+
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr ""
+
+msgid "User cancelled."
+msgstr ""
+
 #: resources/data/hints.ini: [hint:Precise wall]
 msgid ""
 "Precise wall\n"

localization/i18n/pl/OrcaSlicer_pl.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-23 13:08+0800\n"
+"POT-Creation-Date: 2024-03-29 21:10+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Krzysztof Morga <tlumaczeniebs@gmail.com>\n"
 "Language-Team: \n"
@@ -3226,7 +3226,7 @@ msgid "Succeed to export G-code to %1%"
 msgstr "Pomyślnie wyeksportowano G-code do %1%"
 
 msgid "Running post-processing scripts"
-msgstr "Uruchamianie skryptów po obróbce"
+msgstr "Uruchamianie skryptu post-procesingu"
 
 msgid "Copying of the temporary G-code to the output G-code failed"
 msgstr "Kopiowanie tymczasowego kodu G do kodu G wynikowego nie powiodło się"
@@ -7109,8 +7109,8 @@ msgstr "Ignoruj"
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
+"by right-click the empty position of build plate and choose \"Add Primitive"
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Podczas nagrywania timelapse'a bez głowicy narzędziowej zaleca się dodanie "
 "\"Timelaps - Wieża Czyszcząca\" \n"
@@ -8957,10 +8957,10 @@ msgid ""
 msgstr ""
 "Unikaj ruchów nad obrysami-\n"
 "Maksymalna długość objazdu przy unikaniu przejeżdżania nad obrysami. Jeśli "
-"objazd miałby wykroczyć poza tę wartość, funkcja \"unikaj ruchów nad "
+"objazd miałby wykroczyć poza tę wartość, funkcja \"unikaj ruchów nad obrysami"
-"obrysami\" zostanie zignorowana dla tej ścieżki. Długość objazdu można "
+"\" zostanie zignorowana dla tej ścieżki. Długość objazdu można zdefiniować "
-"zdefiniować jako wartość absolutna lub obliczona procentowo (np. 50%) z "
+"jako wartość absolutna lub obliczona procentowo (np. 50%) z długości ruchu "
-"długości ruchu bezpośredniego."
+"bezpośredniego."
 
 msgid "mm or %"
 msgstr "mm lub %"
@@ -9520,9 +9520,9 @@ msgid ""
 "quality for needle and small details"
 msgstr ""
 "Włącz tę opcję, aby zwolnić prędkość druku, aby czas końcowej warstwy nie "
-"był krótszy niż próg czasu warstwy w \"Próg maksymalnej prędkości "
+"był krótszy niż próg czasu warstwy w \"Próg maksymalnej prędkości wentylatora"
-"wentylatora\", tak aby warstwa mogła być chłodzona przez dłuższy czas. Może "
+"\", tak aby warstwa mogła być chłodzona przez dłuższy czas. Może to poprawić "
-"to poprawić jakość chłodzenia dla igieł i małych detali"
+"jakość chłodzenia dla igieł i małych detali"
 
 msgid "Normal printing"
 msgstr "Normalne drukowanie"
@@ -10649,10 +10649,10 @@ msgstr "Pełna prędkość wentylatora na warstwie"
 
 msgid ""
 "Fan speed will be ramped up linearly from zero at layer "
-"\"close_fan_the_first_x_layers\" to maximum at layer "
+"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
-"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
+"\". \"full_fan_speed_layer\" will be ignored if lower than "
-"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
+"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
-"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
+"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
 msgstr ""
 "Prędkość wentylatora będzie stopniowo zwiększana liniowo od zera na warstwie "
 "\"close_fan_the_first_x_layers\" do maksymalnej na warstwie "
@@ -11809,6 +11809,12 @@ msgstr "Pokaż znaczniki autokalibracji"
 msgid "Disable set remaining print time"
 msgstr "Wyłącz ustawianie pozostałego czasu druku"
 
+msgid ""
+"Disable generating of the M73: Set remaining print time in the final gcode"
+msgstr ""
+"Zablokuj generowanie polecenia M73: Ustaw pozostały czas druku w końcowym "
+"kodzie G-code"
+
 msgid "Seam position"
 msgstr "Pozycja szwu"
 
@@ -11884,6 +11890,18 @@ msgstr ""
 "wskazuje na brak ostrych narożników), zostanie użyty szew ukośny. Domyślna "
 "wartość to 155°."
 
+msgid "Conditional overhang threshold"
+msgstr ""
+
+#, no-c-format, no-boost-format
+msgid ""
+"This option determines the overhang threshold for the application of scarf "
+"joint seams. If the unsupported portion of the perimeter is less than this "
+"threshold, scarf joint seams will be applied. The default threshold is set "
+"at 40% of the external wall's width. Due to performance considerations, the "
+"degree of overhang is estimated."
+msgstr ""
+
 msgid "Scarf joint speed"
 msgstr "Prędkość szwu ukośnego"
 
@@ -12122,8 +12140,8 @@ msgstr ""
 "poklatkowy po zakończeniu drukowania. Jeśli wybrany jest tryb \"Wygładź\", "
 "głowica narzędziowa przesunie się nad wieżę po wydrukowaniu każdej warstwy, "
 "a następnie zrobi zdjęcie. Ponieważ stopiony filament może wyciekać z dyszy "
-"podczas robienia zdjęcia, wieża czyszcząca jest wymagana w trybie "
+"podczas robienia zdjęcia, wieża czyszcząca jest wymagana w trybie \"Wygładź"
-"\"Wygładź\" do czyszczenia dyszy."
+"\" do czyszczenia dyszy."
 
 msgid "Traditional"
 msgstr "Tradycyjny"
@@ -12203,10 +12221,10 @@ msgid ""
 "triangle mesh slicing. The gap closing operation may reduce the final print "
 "resolution, therefore it is advisable to keep the value reasonably low."
 msgstr ""
-"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania "
+"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania szpar"
-"szpar\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może "
+"\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może zmniejszyć "
-"zmniejszyć finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej "
+"finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej wartości na "
-"wartości na rozsądnie niskim poziomie."
+"rozsądnie niskim poziomie."
 
 msgid "Slicing Mode"
 msgstr "Tryb cięcia"
@@ -14509,8 +14527,8 @@ msgstr ""
 "Czy chcesz go zastąpić?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"selected\". \n"
+"\". \n"
 "To add preset for more printers, Please go to printer selection"
 msgstr ""
 "Nazwa profilu zostanie zmieniona na \"Producent Typ Rodzaj @nazwa drukarki, "
@@ -15111,6 +15129,52 @@ msgstr ""
 "Treść wiadomości: \"%1%\"\n"
 "Błąd: \"%2%\""
 
+msgid "Connected to Obico successfully!"
+msgstr "Pomyślnie połączono z SimplyPrint!"
+
+msgid "Could not connect to Obico"
+msgstr "Nie można połączyć się z Obico"
+
+msgid "Connected to SimplyPrint successfully!"
+msgstr "Pomyślnie połączono z SimplyPrint!"
+
+msgid "Could not connect to SimplyPrint"
+msgstr "Nie można połączyć się z SimplyPrint"
+
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+"Nie połączono z kontem SimplyPrint. Przejdź do opcji Połącz, aby go "
+"skonfigurować."
+
+msgid ""
+"File size exceeds the 100MB upload limit. Please upload your file through "
+"the panel."
+msgstr ""
+"Rozmiar pliku przekracza limit przesyłania 100 MB. Proszę przesłać plik za "
+"pomocą panelu."
+
+msgid "Unknown error"
+msgstr "Nieznany błąd"
+
+msgid "Connection to Flashforge works correctly."
+msgstr "Połączenie z Flashforge działa poprawnie."
+
+msgid "Could not connect to Flashforge"
+msgstr "Nie można połączyć się z Flashforge"
+
+msgid "The provided state is not correct."
+msgstr "Podany stan nie jest właściwy"
+
+msgid "Please give the required permissions when authorizing this application."
+msgstr ""
+"Proszę udzielić wymaganych uprawnień podczas autoryzacji tej aplikacji."
+
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "Wystąpił problem podczas próby logowania, proszę spróbować ponownie."
+
+msgid "User cancelled."
+msgstr "Anulowane przez użytkownika."
+
 #: resources/data/hints.ini: [hint:Precise wall]
 msgid ""
 "Precise wall\n"
@@ -15498,6 +15562,17 @@ msgstr ""
 "takimi jak ABS, odpowiednie zwiększenie temperatury podgrzewanej płyty może "
 "zmniejszyć prawdopodobieństwo odkształceń."
 
+#~ msgid "Timeout when authenticating with the account server."
+#~ msgstr "Przekroczono limit czasu serwera podczas uwierzytelniania."
+
+#~ msgid ""
+#~ "Air filtration/Exhuast Fan\n"
+#~ "Did you know that OrcaSlicer can support Air filtration/Exhuast Fan?"
+#~ msgstr ""
+#~ "Filtracja powietrza/Wentylator wyciągowy\n"
+#~ "Czy wiesz, że OrcaSlicer może obsługiwać filtrację powietrza/wentylator "
+#~ "wyciągowy?"
+
 #~ msgid "Studio Version:"
 #~ msgstr "Wersja Studio:"
 
@@ -15624,14 +15699,6 @@ msgstr ""
 #~ "ograniczona, upewnij się, że używasz odpowiedniej liczby ścian do "
 #~ "podparcia części na nachylonych powierzchniach."
 
-#~ msgid ""
-#~ "Air filtration/Exhuast Fan\n"
-#~ "Did you know that OrcaSlicer can support Air filtration/Exhuast Fan?"
-#~ msgstr ""
-#~ "Filtracja powietrza/Wentylator wyciągowy\n"
-#~ "Czy wiesz, że OrcaSlicer może obsługiwać filtrację powietrza/wentylator "
-#~ "wyciągowy?"
-
 #~ msgid "Scarf joint seam"
 #~ msgstr "Szew szalikowy (beta)"
 
@@ -16383,8 +16450,8 @@ msgstr ""
 #~ "Elevation is too low for object. Use the \"Pad around object\" feature to "
 #~ "print the object without elevation."
 #~ msgstr ""
-#~ "Podniesienie zbyt małe dla modelu. Użyj funkcji \"Podkładka wokół "
+#~ "Podniesienie zbyt małe dla modelu. Użyj funkcji \"Podkładka wokół modelu"
-#~ "modelu\", aby wydrukować model bez podniesienia."
+#~ "\", aby wydrukować model bez podniesienia."
 
 #~ msgid ""
 #~ "The endings of the support pillars will be deployed on the gap between "
@@ -16627,12 +16694,6 @@ msgstr ""
 #~ "masz na następnej warstwie jakieś cienkie elementy, na przykład litery. "
 #~ "Ustaw tę opcję na 0, aby usunąć te artefakty."
 
-#~ msgid ""
-#~ "Disable generating of the M73: Set remaining print time in the final gcode"
-#~ msgstr ""
-#~ "Zablokuj generowanie polecenia M73: Ustaw pozostały czas druku w końcowym "
-#~ "kodzie G-code"
-
 #~ msgid "Layer order"
 #~ msgstr "Kolejność warstw"
 

localization/i18n/ru/OrcaSlicer_ru.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer V2.0.0 beta\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-23 13:08+0800\n"
+"POT-Creation-Date: 2024-03-29 21:10+0800\n"
 "PO-Revision-Date: 2024-03-17 18:48+0700\n"
 "Last-Translator: \n"
 "Language-Team: andylg@yandex.ru\n"
@@ -11848,6 +11848,12 @@ msgstr "Отображать на столе линии автокалибров
 msgid "Disable set remaining print time"
 msgstr "Откл. генерацию оставшегося времени печати"
 
+msgid ""
+"Disable generating of the M73: Set remaining print time in the final gcode"
+msgstr ""
+"Отключение генерации команды M73 - вывода оставшегося времени печати в "
+"конечный G-код."
+
 msgid "Seam position"
 msgstr "Позиция шва"
 
@@ -11926,6 +11932,18 @@ msgstr ""
 "указывает на отсутствие острых углов), будет использован клиновидный шов. "
 "Значение по умолчанию - 155°."
 
+msgid "Conditional overhang threshold"
+msgstr ""
+
+#, no-c-format, no-boost-format
+msgid ""
+"This option determines the overhang threshold for the application of scarf "
+"joint seams. If the unsupported portion of the perimeter is less than this "
+"threshold, scarf joint seams will be applied. The default threshold is set "
+"at 40% of the external wall's width. Due to performance considerations, the "
+"degree of overhang is estimated."
+msgstr ""
+
 msgid "Scarf joint speed"
 msgstr "Скорость клиновидного шва"
 
@@ -15171,6 +15189,47 @@ msgstr ""
 "Текст сообщения: \"%1%\"\n"
 "Ошибка: \"%2%\""
 
+msgid "Connected to Obico successfully!"
+msgstr ""
+
+msgid "Could not connect to Obico"
+msgstr ""
+
+msgid "Connected to SimplyPrint successfully!"
+msgstr ""
+
+msgid "Could not connect to SimplyPrint"
+msgstr ""
+
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
+msgid ""
+"File size exceeds the 100MB upload limit. Please upload your file through "
+"the panel."
+msgstr ""
+
+msgid "Unknown error"
+msgstr ""
+
+msgid "Connection to Flashforge works correctly."
+msgstr ""
+
+msgid "Could not connect to Flashforge"
+msgstr ""
+
+msgid "The provided state is not correct."
+msgstr ""
+
+msgid "Please give the required permissions when authorizing this application."
+msgstr ""
+
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr ""
+
+msgid "User cancelled."
+msgstr ""
+
 #: resources/data/hints.ini: [hint:Precise wall]
 msgid ""
 "Precise wall\n"
@@ -15640,12 +15699,6 @@ msgstr ""
 #~ msgid "Test Storage Upload"
 #~ msgstr "Тест накопителя (отправка)"
 
-#~ msgid ""
-#~ "Disable generating of the M73: Set remaining print time in the final gcode"
-#~ msgstr ""
-#~ "Отключение генерации команды M73 - вывода оставшегося времени печати в "
-#~ "конечный G-код."
-
 #~ msgid "AMS %s"
 #~ msgstr "АСПП №%s"
 

localization/i18n/sv/OrcaSlicer_sv.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-23 13:08+0800\n"
+"POT-Creation-Date: 2024-03-29 21:10+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -11001,6 +11001,10 @@ msgstr ""
 msgid "Disable set remaining print time"
 msgstr ""
 
+msgid ""
+"Disable generating of the M73: Set remaining print time in the final gcode"
+msgstr ""
+
 msgid "Seam position"
 msgstr "Söm position"
 
@@ -11062,6 +11066,18 @@ msgid ""
 "The default value is 155°."
 msgstr ""
 
+msgid "Conditional overhang threshold"
+msgstr ""
+
+#, no-c-format, no-boost-format
+msgid ""
+"This option determines the overhang threshold for the application of scarf "
+"joint seams. If the unsupported portion of the perimeter is less than this "
+"threshold, scarf joint seams will be applied. The default threshold is set "
+"at 40% of the external wall's width. Due to performance considerations, the "
+"degree of overhang is estimated."
+msgstr ""
+
 msgid "Scarf joint speed"
 msgstr ""
 
@@ -13883,6 +13899,47 @@ msgid ""
 "Error: \"%2%\""
 msgstr ""
 
+msgid "Connected to Obico successfully!"
+msgstr ""
+
+msgid "Could not connect to Obico"
+msgstr ""
+
+msgid "Connected to SimplyPrint successfully!"
+msgstr ""
+
+msgid "Could not connect to SimplyPrint"
+msgstr ""
+
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
+msgid ""
+"File size exceeds the 100MB upload limit. Please upload your file through "
+"the panel."
+msgstr ""
+
+msgid "Unknown error"
+msgstr ""
+
+msgid "Connection to Flashforge works correctly."
+msgstr ""
+
+msgid "Could not connect to Flashforge"
+msgstr ""
+
+msgid "The provided state is not correct."
+msgstr ""
+
+msgid "Please give the required permissions when authorizing this application."
+msgstr ""
+
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr ""
+
+msgid "User cancelled."
+msgstr ""
+
 #: resources/data/hints.ini: [hint:Precise wall]
 msgid ""
 "Precise wall\n"

localization/i18n/tr/OrcaSlicer_tr.po

@@ -6,8 +6,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-23 13:08+0800\n"
+"POT-Creation-Date: 2024-03-29 21:10+0800\n"
-"PO-Revision-Date: 2024-03-14 22:00+0300\n"
+"PO-Revision-Date: 2024-03-29 21:50+0300\n"
 "Last-Translator: Olcay ÖREN\n"
 "Language-Team: Türkçe\n"
 "Language: tr_TR\n"
@@ -3446,6 +3446,8 @@ msgid ""
 "seam_slope_start_height need to be smaller than layer_height.\n"
 "Reset to 0."
 msgstr ""
+"Dikiş eğimi başlangıç ​​yüksekliğinin katman yüksekliğinden daha küçük olması gerekir.\n"
+"0 a sıfırla."
 
 msgid "Auto bed leveling"
 msgstr "Otomatik yatak tesviyesi"
@@ -6121,7 +6123,7 @@ msgid "Stealth Mode"
 msgstr "Gizli mod"
 
 msgid "Enable network plugin"
-msgstr ""
+msgstr "Ağ eklentisini etkinleştir"
 
 msgid "Check for stable updates only"
 msgstr "Yalnızca kararlı güncellemeleri kontrol edin"
@@ -6181,7 +6183,7 @@ msgid "If enabled, auto-calculate everytime the color changed."
 msgstr "Etkinleştirilirse, renk her değiştiğinde otomatik hesapla."
 
 msgid "Network"
-msgstr ""
+msgstr "Ağ"
 
 msgid "Auto sync user presets(Printer/Filament/Process)"
 msgstr "Kullanıcı ön ayarları otomatik senkronizasyon (Yazıcı/Filament/İşlem)"
@@ -8766,10 +8768,10 @@ msgid "Printer preset names"
 msgstr "Yazıcı ön ayar adları"
 
 msgid "Use 3rd-party print host"
-msgstr ""
+msgstr "3. taraf yazdırma ana bilgisayarını kullanın"
 
 msgid "Allow controlling BambuLab's printer through 3rd party print hosts"
-msgstr ""
+msgstr "BambuLab yazıcısının 3. taraf yazdırma ana bilgisayarları aracılığıyla kontrol edilmesine izin ver"
 
 msgid "Hostname, IP or URL"
 msgstr "Ana bilgisayar adı, IP veya URL"
@@ -11650,6 +11652,11 @@ msgstr "Otomatik kalibrasyon işaretlerini göster"
 msgid "Disable set remaining print time"
 msgstr "Kalan yazdırma süresini ayarlamayı devre dışı bırak"
 
+msgid ""
+"Disable generating of the M73: Set remaining print time in the final gcode"
+msgstr ""
+"M73'ün oluşturulmasını devre dışı bırakın: Son gcode'da kalan yazdırma süresini ayarlayın"
+
 msgid "Seam position"
 msgstr "Dikiş konumu"
 
@@ -11726,6 +11733,23 @@ msgstr ""
 "bulunmadığını gösterir), bir atkı birleştirme dikişi kullanılacaktır. "
 "Varsayılan değer 155°'dir."
 
+msgid "Conditional overhang threshold"
+msgstr "Koşullu çıkıntı eşiği"
+
+#, no-c-format, no-boost-format
+msgid ""
+"This option determines the overhang threshold for the application of scarf "
+"joint seams. If the unsupported portion of the perimeter is less than this "
+"threshold, scarf joint seams will be applied. The default threshold is set "
+"at 40% of the external wall's width. Due to performance considerations, the "
+"degree of overhang is estimated."
+msgstr ""
+"Bu seçenek, atkı bağlantı dikişlerinin uygulanması için sarkma "
+"eşiğini belirler. Çevrenin desteklenmeyen kısmı bu eşikten az ise atkı "
+"birleştirme dikişleri uygulanacaktır. Varsayılan eşik, dış duvar genişliğinin "
+"%40'ına ayarlanmıştır. Performans değerlendirmeleri nedeniyle çıkıntının "
+"derecesi tahmin edilir."
+
 msgid "Scarf joint speed"
 msgstr "Atkı birleşim hızı"
 
@@ -14208,7 +14232,7 @@ msgid "Export Log"
 msgstr "Logu Dışa Aktar"
 
 msgid "OrcaSlicer Version:"
-msgstr ""
+msgstr "OrcaSlicer Sürümü:"
 
 msgid "System Version:"
 msgstr "Sistem Versiyonu:"
@@ -14217,10 +14241,10 @@ msgid "DNS Server:"
 msgstr "Dns sunucusu:"
 
 msgid "Test OrcaSlicer(GitHub)"
-msgstr ""
+msgstr "OrcaSlicer'ı (GitHub) test edin"
 
 msgid "Test OrcaSlicer(GitHub):"
-msgstr ""
+msgstr "OrcaSlicer'ı (GitHub) test edin:"
 
 msgid "Test Bing.com"
 msgstr "Bing.com'u test edin"
@@ -14746,7 +14770,7 @@ msgid "Success!"
 msgstr "Başarılı!"
 
 msgid "Are you sure to log out?"
-msgstr ""
+msgstr "Çıkış yaptığınızdan emin misiniz?"
 
 msgid "Refresh Printers"
 msgstr "Yazıcıları Yenile"
@@ -14780,7 +14804,7 @@ msgstr ""
 "Anahtarlığa aktarın."
 
 msgid "Login/Test"
-msgstr ""
+msgstr "Giriş/Test"
 
 msgid "Connection to printers connected via the print host failed."
 msgstr ""
@@ -14919,6 +14943,49 @@ msgstr ""
 "Mesaj gövdesi: \"%1%\"\n"
 "Hata: \"%2%\""
 
+msgid "Connected to Obico successfully!"
+msgstr "Obico'ya başarıyla bağlanıldı!"
+
+msgid "Could not connect to Obico"
+msgstr "Obico'ya bağlanılamadı"
+
+msgid "Connected to SimplyPrint successfully!"
+msgstr "SimplyPrint'e başarıyla bağlanıldı!"
+
+msgid "Could not connect to SimplyPrint"
+msgstr "SimplyPrint'e bağlanılamadı"
+
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr "SimplyPrint hesabı bağlı değil. Ayarlamak için Bağlantı seçeneklerine gidin."
+
+msgid ""
+"File size exceeds the 100MB upload limit. Please upload your file through "
+"the panel."
+msgstr ""
+"Dosya boyutu 100 MB yükleme sınırını aşıyor. Lütfen dosyanızı panel "
+"üzerinden yükleyiniz."
+
+msgid "Unknown error"
+msgstr "Bilinmeyen hata"
+
+msgid "Connection to Flashforge works correctly."
+msgstr "Flashforge bağlantısı düzgün çalışıyor."
+
+msgid "Could not connect to Flashforge"
+msgstr "Flashforge'a bağlanılamadı"
+
+msgid "The provided state is not correct."
+msgstr "Sağlanan durum doğru değil."
+
+msgid "Please give the required permissions when authorizing this application."
+msgstr "Lütfen bu uygulamaya yetki verirken gerekli izinleri verin."
+
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "Giriş yapmaya çalışırken beklenmeyen bir şey oldu, lütfen tekrar deneyin."
+
+msgid "User cancelled."
+msgstr "Kullanıcı iptal edildi."
+
 #: resources/data/hints.ini: [hint:Precise wall]
 msgid ""
 "Precise wall\n"

localization/i18n/uk/OrcaSlicer_uk.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-23 13:08+0800\n"
+"POT-Creation-Date: 2024-03-29 21:10+0800\n"
 "PO-Revision-Date: 2023-08-10 20:25-0400\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -11159,6 +11159,10 @@ msgstr "Показати мітки автоматичного калібрув
 msgid "Disable set remaining print time"
 msgstr ""
 
+msgid ""
+"Disable generating of the M73: Set remaining print time in the final gcode"
+msgstr ""
+
 msgid "Seam position"
 msgstr "Положення шва"
 
@@ -11225,6 +11229,18 @@ msgid ""
 "The default value is 155°."
 msgstr ""
 
+msgid "Conditional overhang threshold"
+msgstr ""
+
+#, no-c-format, no-boost-format
+msgid ""
+"This option determines the overhang threshold for the application of scarf "
+"joint seams. If the unsupported portion of the perimeter is less than this "
+"threshold, scarf joint seams will be applied. The default threshold is set "
+"at 40% of the external wall's width. Due to performance considerations, the "
+"degree of overhang is estimated."
+msgstr ""
+
 msgid "Scarf joint speed"
 msgstr ""
 
@@ -14058,6 +14074,47 @@ msgid ""
 "Error: \"%2%\""
 msgstr ""
 
+msgid "Connected to Obico successfully!"
+msgstr ""
+
+msgid "Could not connect to Obico"
+msgstr ""
+
+msgid "Connected to SimplyPrint successfully!"
+msgstr ""
+
+msgid "Could not connect to SimplyPrint"
+msgstr ""
+
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
+msgid ""
+"File size exceeds the 100MB upload limit. Please upload your file through "
+"the panel."
+msgstr ""
+
+msgid "Unknown error"
+msgstr ""
+
+msgid "Connection to Flashforge works correctly."
+msgstr ""
+
+msgid "Could not connect to Flashforge"
+msgstr ""
+
+msgid "The provided state is not correct."
+msgstr ""
+
+msgid "Please give the required permissions when authorizing this application."
+msgstr ""
+
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr ""
+
+msgid "User cancelled."
+msgstr ""
+
 #: resources/data/hints.ini: [hint:Precise wall]
 msgid ""
 "Precise wall\n"

localization/i18n/zh_CN/OrcaSlicer_zh_CN.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-23 13:08+0800\n"
+"POT-Creation-Date: 2024-03-29 21:10+0800\n"
 "PO-Revision-Date: 2023-04-01 13:21+0800\n"
 "Last-Translator: SoftFever <softfeverever@gmail.com>\n"
 "Language-Team: \n"
@@ -10867,6 +10867,10 @@ msgstr "显示雷达标定线"
 msgid "Disable set remaining print time"
 msgstr "禁用M73剩余打印时间"
 
+msgid ""
+"Disable generating of the M73: Set remaining print time in the final gcode"
+msgstr ""
+
 msgid "Seam position"
 msgstr "接缝位置"
 
@@ -10931,6 +10935,20 @@ msgstr ""
 "如果围墙环内的最大角度超过了这个值（表示没有足够锐的角），则使用斜拼接缝接"
 "缝。默认值为155°。"
 
+msgid "Conditional overhang threshold"
+msgstr "悬垂阈值"
+
+#, no-c-format, no-boost-format
+msgid ""
+"This option determines the overhang threshold for the application of scarf "
+"joint seams. If the unsupported portion of the perimeter is less than this "
+"threshold, scarf joint seams will be applied. The default threshold is set "
+"at 40% of the external wall's width. Due to performance considerations, the "
+"degree of overhang is estimated."
+msgstr ""
+"此选项设置斜拼接缝应用的悬垂阈值。如果围墙的未支撑部分小于此阈值，则应用斜拼"
+"接缝接缝。默认阈值设置为外墙宽度的40%。由于性能考虑，悬垂程度是粗略估算。"
+
 msgid "Scarf joint speed"
 msgstr "斜拼接缝速度"
 
@@ -11965,13 +11983,12 @@ msgid ""
 "top-surface. 'One wall threshold' is only visibile if this setting is set "
 "above the default value of 0.5, or if single-wall top surfaces is enabled."
 msgstr ""
-"调整这个值以省略打印短的、未闭合的墙，这些可能会增加打印时间。设置较高的值将移除更"
+"调整这个值以省略打印短的、未闭合的墙，这些可能会增加打印时间。设置较高的值将"
-"多和更长的墙。\n"
+"移除更多和更长的墙。\n"
 "\n"
-"注意：底部和顶部表面不会受到这个值的影响，以防止模型外部出现肉眼可见间隙。调整下面"
+"注意：底部和顶部表面不会受到这个值的影响，以防止模型外部出现肉眼可见间隙。调"
-"的高级设置中的“单层墙阈值”来调整什么被认为是顶部表面的敏感度。只有当这个设置高"
+"整下面的高级设置中的“单层墙阈值”来调整什么被认为是顶部表面的敏感度。只有当这"
-"于默认值0.5，或者启用了单层顶部表面时，“单层墙阈值”才会显示。"
+"个设置高于默认值0.5，或者启用了单层顶部表面时，“单层墙阈值”才会显示。"
-
 
 msgid "First layer minimum wall width"
 msgstr "首层墙最小线宽"
@@ -13831,6 +13848,47 @@ msgid ""
 "Error: \"%2%\""
 msgstr "主机打印机的枚举失败。消息体：\"%1%\"错误：\"%2%\""
 
+msgid "Connected to Obico successfully!"
+msgstr ""
+
+msgid "Could not connect to Obico"
+msgstr ""
+
+msgid "Connected to SimplyPrint successfully!"
+msgstr ""
+
+msgid "Could not connect to SimplyPrint"
+msgstr ""
+
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
+msgid ""
+"File size exceeds the 100MB upload limit. Please upload your file through "
+"the panel."
+msgstr ""
+
+msgid "Unknown error"
+msgstr ""
+
+msgid "Connection to Flashforge works correctly."
+msgstr ""
+
+msgid "Could not connect to Flashforge"
+msgstr ""
+
+msgid "The provided state is not correct."
+msgstr ""
+
+msgid "Please give the required permissions when authorizing this application."
+msgstr ""
+
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr ""
+
+msgid "User cancelled."
+msgstr ""
+
 #: resources/data/hints.ini: [hint:Precise wall]
 msgid ""
 "Precise wall\n"

localization/i18n/zh_TW/OrcaSlicer_zh_TW.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-23 13:08+0800\n"
+"POT-Creation-Date: 2024-03-29 21:10+0800\n"
 "PO-Revision-Date: 2023-11-06 14:37+0800\n"
 "Last-Translator: ablegods <ablegods@gmail.com>\n"
 "Language-Team: \n"
@@ -11315,6 +11315,10 @@ msgstr "顯示雷達校準線"
 msgid "Disable set remaining print time"
 msgstr ""
 
+msgid ""
+"Disable generating of the M73: Set remaining print time in the final gcode"
+msgstr ""
+
 msgid "Seam position"
 msgstr "接縫位置"
 
@@ -11376,6 +11380,18 @@ msgid ""
 "The default value is 155°."
 msgstr ""
 
+msgid "Conditional overhang threshold"
+msgstr ""
+
+#, no-c-format, no-boost-format
+msgid ""
+"This option determines the overhang threshold for the application of scarf "
+"joint seams. If the unsupported portion of the perimeter is less than this "
+"threshold, scarf joint seams will be applied. The default threshold is set "
+"at 40% of the external wall's width. Due to performance considerations, the "
+"degree of overhang is estimated."
+msgstr ""
+
 msgid "Scarf joint speed"
 msgstr ""
 
@@ -14312,6 +14328,47 @@ msgid ""
 "Error: \"%2%\""
 msgstr ""
 
+msgid "Connected to Obico successfully!"
+msgstr ""
+
+msgid "Could not connect to Obico"
+msgstr ""
+
+msgid "Connected to SimplyPrint successfully!"
+msgstr ""
+
+msgid "Could not connect to SimplyPrint"
+msgstr ""
+
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
+msgid ""
+"File size exceeds the 100MB upload limit. Please upload your file through "
+"the panel."
+msgstr ""
+
+msgid "Unknown error"
+msgstr ""
+
+msgid "Connection to Flashforge works correctly."
+msgstr ""
+
+msgid "Could not connect to Flashforge"
+msgstr ""
+
+msgid "The provided state is not correct."
+msgstr ""
+
+msgid "Please give the required permissions when authorizing this application."
+msgstr ""
+
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr ""
+
+msgid "User cancelled."
+msgstr ""
+
 #: resources/data/hints.ini: [hint:Precise wall]
 msgid ""
 "Precise wall\n"

resources/profiles/Anker.json

@@ -1,6 +1,6 @@
 {
     "name": "Anker",
-    "version": "02.00.01.00",
+    "version": "02.00.02.00",
     "force_update": "0",
     "description": "Anker configurations",
     "machine_model_list": [

resources/profiles/Anycubic.json

@@ -1,6 +1,6 @@
 {
     "name": "Anycubic",
-    "version": "02.00.01.00",
+    "version": "02.00.02.00",
     "force_update": "0",
     "description": "Anycubic configurations",
     "machine_model_list": [

resources/profiles/Artillery.json

@@ -1,6 +1,6 @@
 {
     "name": "Artillery",
-    "version": "02.00.01.00",
+    "version": "02.00.02.00",
     "force_update": "0",
     "description": "Artillery configurations",
     "machine_model_list": [

resources/profiles/Artillery/machine/Artillery Sidewinder X1 0.4 nozzle.json

@@ -43,8 +43,8 @@
 		"960"
 	],
 	"machine_max_acceleration_z": [
-		"1000",
+		"100",
-		"1000"
+		"100"
 	],
 	"machine_max_speed_e": [
 		"120",

resources/profiles/BIQU.json

@@ -1,6 +1,6 @@
 {
     "name": "BIQU",
-    "version": "02.00.01.00",
+    "version": "02.00.02.00",
     "force_update": "0",
     "description": "BIQU configurations",
     "machine_model_list": [

resources/profiles/CONSTRUCT3D.json

@@ -1,6 +1,6 @@
 {
     "name": "CONSTRUCT3D",
-    "version": "02.00.01.00",
+    "version": "02.00.02.00",
     "force_update": "0",
     "description": "Construct3D configurations",
     "machine_model_list": [

resources/profiles/Comgrow.json

@@ -1,6 +1,6 @@
 {
 	"name": "Comgrow",
-	"version": "02.00.01.00",
+	"version": "02.00.02.00",
 	"force_update": "0",
 	"description": "Comgrow configurations",
 	"machine_model_list": [

resources/profiles/Creality.json

@@ -1,6 +1,6 @@
 {
 	"name": "Creality",
-	"version": "02.00.01.00",
+	"version": "02.00.02.00",
 	"force_update": "0",
 	"description": "Creality configurations",
 	"machine_model_list": [
@@ -12,6 +12,10 @@
 			"name": "Creality CR-10 Max",
 			"sub_path": "machine/Creality CR-10 Max.json"
 		},
+		{
+			"name": "Creality CR-10 SE",
+			"sub_path": "machine/Creality CR-10 SE.json"
+		},
 		{
 			"name": "Creality CR-6 SE",
 			"sub_path": "machine/Creality CR-6 SE.json"
@@ -44,6 +48,10 @@
 			"name": "Creality Ender-3 S1 Pro",
 			"sub_path": "machine/Creality Ender-3 S1 Pro.json"
 		},
+		{
+			"name": "Creality Ender-3 S1 Plus",
+			"sub_path": "machine/Creality Ender-3 S1 Plus.json"
+		},
 		{
 			"name": "Creality Ender-3 V3 SE",
 			"sub_path": "machine/Creality Ender-3 V3 SE.json"
@@ -278,13 +286,25 @@
 			"name": "0.12mm Fine @Creality Ender3V2Neo",
 			"sub_path": "process/0.12mm Fine @Creality Ender3V2Neo.json"
 		},
+		{
+			"name": "0.12mm Fine @Creality Ender3V3KE",
+			"sub_path": "process/0.12mm Fine @Creality Ender3V3KE.json"
+		},
+		{
+			"name": "0.12mm Fine @Creality Ender3V3SE 0.2",
+			"sub_path": "process/0.12mm Fine @Creality Ender3V3SE 0.2.json"
+		},
 		{
 			"name": "0.12mm Fine @Creality Ender3V3SE",
 			"sub_path": "process/0.12mm Fine @Creality Ender3V3SE.json"
 		},
 		{
-			"name": "0.12mm Fine @Creality Ender3V3KE",
+			"name": "0.12mm Fine @Creality Ender3V3SE 0.6",
-			"sub_path": "process/0.12mm Fine @Creality Ender3V3KE.json"
+			"sub_path": "process/0.12mm Fine @Creality Ender3V3SE 0.6.json"
+		},
+		{
+			"name": "0.12mm Fine @Creality Ender3V3SE 0.8",
+			"sub_path": "process/0.12mm Fine @Creality Ender3V3SE 0.8.json"
 		},
 		{
 			"name": "0.12mm Detail @Creality Ender5Pro (2019) 0.2",
@@ -359,13 +379,41 @@
 			"sub_path": "process/0.16mm Optimal @Creality Ender3S1Pro.json"
 		},
 		{
-			"name": "0.16mm Optimal @Creality Ender3V3SE",
+			"name": "0.16mm Optimal @Creality Ender3S1Plus 0.2",
-			"sub_path": "process/0.16mm Optimal @Creality Ender3V3SE.json"
+			"sub_path": "process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality Ender3S1Plus 0.4",
+			"sub_path": "process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality Ender3S1Plus 0.6",
+			"sub_path": "process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality Ender3S1Plus 0.8",
+			"sub_path": "process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json"
 		},
 		{
 			"name": "0.16mm Optimal @Creality Ender3V3KE",
 			"sub_path": "process/0.16mm Optimal @Creality Ender3V3KE.json"
 		},
+		{
+			"name": "0.16mm Optimal @Creality Ender3V3SE 0.2",
+			"sub_path": "process/0.16mm Optimal @Creality Ender3V3SE 0.2.json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality Ender3V3SE",
+			"sub_path": "process/0.16mm Optimal @Creality Ender3V3SE.json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality Ender3V3SE 0.6",
+			"sub_path": "process/0.16mm Optimal @Creality Ender3V3SE 0.6.json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality Ender3V3SE 0.8",
+			"sub_path": "process/0.16mm Optimal @Creality Ender3V3SE 0.8.json"
+		},
 		{
 			"name": "0.16mm Optimal @Creality Ender5",
 			"sub_path": "process/0.16mm Optimal @Creality Ender5.json"
@@ -430,6 +478,22 @@
 			"name": "0.20mm Standard @Creality CR10Max",
 			"sub_path": "process/0.20mm Standard @Creality CR10Max.json"
 		},
+		{
+			"name": "0.20mm Standard @Creality CR10SE 0.2",
+			"sub_path": "process/0.20mm Standard @Creality CR10SE 0.2.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality CR10SE 0.4",
+			"sub_path": "process/0.20mm Standard @Creality CR10SE 0.4.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality CR10SE 0.6",
+			"sub_path": "process/0.20mm Standard @Creality CR10SE 0.6.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality CR10SE 0.8",
+			"sub_path": "process/0.20mm Standard @Creality CR10SE 0.8.json"
+		},
 		{
 			"name": "0.20mm Standard @Creality CR-6 0.4",
 			"sub_path": "process/0.20mm Standard @Creality CR-6 0.4.json"
@@ -475,13 +539,41 @@
 			"sub_path": "process/0.20mm Standard @Creality Ender3S1Pro.json"
 		},
 		{
-			"name": "0.20mm Standard @Creality Ender3V3SE",
+			"name": "0.20mm Standard @Creality Ender3S1Plus 0.2",
-			"sub_path": "process/0.20mm Standard @Creality Ender3V3SE.json"
+			"sub_path": "process/0.20mm Standard @Creality Ender3S1Plus 0.2.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality Ender3S1Plus 0.4",
+			"sub_path": "process/0.20mm Standard @Creality Ender3S1Plus 0.4.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality Ender3S1Plus 0.6",
+			"sub_path": "process/0.20mm Standard @Creality Ender3S1Plus 0.6.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality Ender3S1Plus 0.8",
+			"sub_path": "process/0.20mm Standard @Creality Ender3S1Plus 0.8.json"
 		},
 		{
 			"name": "0.20mm Standard @Creality Ender3V3KE",
 			"sub_path": "process/0.20mm Standard @Creality Ender3V3KE.json"
 		},
+		{
+			"name": "0.20mm Standard @Creality Ender3V3SE 0.2",
+			"sub_path": "process/0.20mm Standard @Creality Ender3V3SE 0.2.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality Ender3V3SE",
+			"sub_path": "process/0.20mm Standard @Creality Ender3V3SE.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality Ender3V3SE 0.6",
+			"sub_path": "process/0.20mm Standard @Creality Ender3V3SE 0.6.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality Ender3V3SE 0.8",
+			"sub_path": "process/0.20mm Standard @Creality Ender3V3SE 0.8.json"
+		},
 		{
 			"name": "0.20mm Standard @Creality Ender5",
 			"sub_path": "process/0.20mm Standard @Creality Ender5.json"
@@ -578,13 +670,41 @@
 			"name": "0.24mm Draft @Creality Ender3V2Neo",
 			"sub_path": "process/0.24mm Draft @Creality Ender3V2Neo.json"
 		},
+		{
+			"name": "0.24mm Draft @Creality Ender3V3KE",
+			"sub_path": "process/0.24mm Draft @Creality Ender3V3KE.json"
+		},
+		{
+			"name": "0.24mm Draft @Creality Ender3V3SE 0.2",
+			"sub_path": "process/0.24mm Draft @Creality Ender3V3SE 0.2.json"
+		},
 		{
 			"name": "0.24mm Draft @Creality Ender3V3SE",
 			"sub_path": "process/0.24mm Draft @Creality Ender3V3SE.json"
 		},
 		{
-			"name": "0.24mm Draft @Creality Ender3V3KE",
+			"name": "0.24mm Draft @Creality Ender3V3SE 0.6",
-			"sub_path": "process/0.24mm Draft @Creality Ender3V3KE.json"
+			"sub_path": "process/0.24mm Draft @Creality Ender3V3SE 0.6.json"
+		},
+		{
+			"name": "0.24mm Draft @Creality Ender3V3SE 0.8",
+			"sub_path": "process/0.24mm Draft @Creality Ender3V3SE 0.8.json"
+		},
+		{
+			"name": "0.24mm Draft @Creality Ender3S1Plus 0.2",
+			"sub_path": "process/0.24mm Draft @Creality Ender3S1Plus 0.2.json"
+		},
+		{
+			"name": "0.24mm Draft @Creality Ender3S1Plus 0.4",
+			"sub_path": "process/0.24mm Draft @Creality Ender3S1Plus 0.4.json"
+		},
+		{
+			"name": "0.24mm Draft @Creality Ender3S1Plus 0.6",
+			"sub_path": "process/0.24mm Draft @Creality Ender3S1Plus 0.6.json"
+		},
+		{
+			"name": "0.24mm Draft @Creality Ender3S1Plus 0.8",
+			"sub_path": "process/0.24mm Draft @Creality Ender3S1Plus 0.8.json"
 		},
 		{
 			"name": "0.24mm Draft @Creality Ender5Pro (2019) 0.3",
@@ -946,6 +1066,22 @@
 			"name": "Creality CR-10 Max 0.4 nozzle",
 			"sub_path": "machine/Creality CR-10 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "Creality CR-10 SE 0.2 nozzle",
+			"sub_path": "machine/Creality CR-10 SE 0.2 nozzle.json"
+		},
+		{
+			"name": "Creality CR-10 SE 0.4 nozzle",
+			"sub_path": "machine/Creality CR-10 SE 0.4 nozzle.json"
+		},
+		{
+			"name": "Creality CR-10 SE 0.6 nozzle",
+			"sub_path": "machine/Creality CR-10 SE 0.6 nozzle.json"
+		},
+		{
+			"name": "Creality CR-10 SE 0.8 nozzle",
+			"sub_path": "machine/Creality CR-10 SE 0.8 nozzle.json"
+		},
 		{
 			"name": "Creality Ender-6 0.4 nozzle",
 			"sub_path": "machine/Creality Ender-6 0.4 nozzle.json"
@@ -1030,10 +1166,38 @@
 			"name": "Creality Ender-3 S1 Pro 0.4 nozzle",
 			"sub_path": "machine/Creality Ender-3 S1 Pro 0.4 nozzle.json"
 		},
+		{
+			"name": "Creality Ender-3 S1 Plus 0.2 nozzle",
+			"sub_path": "machine/Creality Ender-3 S1 Plus 0.2 nozzle.json"
+		},
+		{
+			"name": "Creality Ender-3 S1 Plus 0.4 nozzle",
+			"sub_path": "machine/Creality Ender-3 S1 Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "Creality Ender-3 S1 Plus 0.6 nozzle",
+			"sub_path": "machine/Creality Ender-3 S1 Plus 0.6 nozzle.json"
+		},
+		{
+			"name": "Creality Ender-3 S1 Plus 0.8 nozzle",
+			"sub_path": "machine/Creality Ender-3 S1 Plus 0.8 nozzle.json"
+		},
+		{
+			"name": "Creality Ender-3 V3 SE 0.2 nozzle",
+			"sub_path": "machine/Creality Ender-3 V3 SE 0.2 nozzle.json"
+		},
 		{
 			"name": "Creality Ender-3 V3 SE 0.4 nozzle",
 			"sub_path": "machine/Creality Ender-3 V3 SE 0.4 nozzle.json"
 		},
+		{
+			"name": "Creality Ender-3 V3 SE 0.6 nozzle",
+			"sub_path": "machine/Creality Ender-3 V3 SE 0.6 nozzle.json"
+		},
+		{
+			"name": "Creality Ender-3 V3 SE 0.8 nozzle",
+			"sub_path": "machine/Creality Ender-3 V3 SE 0.8 nozzle.json"
+		},
 		{
 			"name": "Creality Ender-3 V3 KE 0.4 nozzle",
 			"sub_path": "machine/Creality Ender-3 V3 KE 0.4 nozzle.json"

resources/profiles/Creality/filament/Creality Generic ABS @Ender-3V3-all.json

@@ -8,7 +8,10 @@
 	"filament_max_volumetric_speed": ["9"],
 	"slow_down_layer_time": ["5"],
 	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle",
 		"Creality Ender-3 V3 SE 0.4 nozzle",
+		"Creality Ender-3 V3 SE 0.6 nozzle",
+		"Creality Ender-3 V3 SE 0.8 nozzle",
 		"Creality Ender-3 V3 KE 0.4 nozzle"
 	]
 }

resources/profiles/Creality/filament/Creality Generic ABS.json

@@ -31,6 +31,10 @@
 		"Creality Ender-3 V2 Neo 0.4 nozzle",
 		"Creality Ender-3 S1 0.4 nozzle",
 		"Creality Ender-3 S1 Pro 0.4 nozzle",
+		"Creality Ender-3 S1 Plus 0.2 nozzle",
+		"Creality Ender-3 S1 Plus 0.4 nozzle",
+		"Creality Ender-3 S1 Plus 0.6 nozzle",
+		"Creality Ender-3 S1 Plus 0.8 nozzle",
 		"Creality Ender-5 0.4 nozzle",
 		"Creality Ender-5 Plus 0.4 nozzle",
 		"Creality Ender-5 Pro (2019) 0.2 nozzle",
@@ -49,7 +53,10 @@
 		"Creality K1 (0.8 nozzle)",
 		"Creality K1 Max (0.4 nozzle)",
 		"Creality K1 Max (0.6 nozzle)",
-		"Creality K1 Max (0.8 nozzle)"
+		"Creality K1 Max (0.8 nozzle)",
-		
+		"Creality CR-10 SE 0.2 nozzle",
+		"Creality CR-10 SE 0.4 nozzle",
+		"Creality CR-10 SE 0.6 nozzle",
+		"Creality CR-10 SE 0.8 nozzle"
 	]
 }

resources/profiles/Creality/filament/Creality Generic ASA @Ender-3V3-all.json

@@ -8,7 +8,10 @@
 	"filament_max_volumetric_speed": ["9"],
 	"slow_down_layer_time": ["5"],
 	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle",
 		"Creality Ender-3 V3 SE 0.4 nozzle",
+		"Creality Ender-3 V3 SE 0.6 nozzle",
+		"Creality Ender-3 V3 SE 0.8 nozzle",
 		"Creality Ender-3 V3 KE 0.4 nozzle"
 	]
 }

resources/profiles/Creality/filament/Creality Generic PETG @Ender-3V3-all.json

@@ -18,7 +18,10 @@
     "nozzle_temperature_initial_layer": ["250"],
     "nozzle_temperature": ["250"],
 	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle",
 		"Creality Ender-3 V3 SE 0.4 nozzle",
+		"Creality Ender-3 V3 SE 0.6 nozzle",
+		"Creality Ender-3 V3 SE 0.8 nozzle",
 		"Creality Ender-3 V3 KE 0.4 nozzle"
 	]
 }

resources/profiles/Creality/filament/Creality Generic PETG.json

@@ -41,6 +41,10 @@
 		"Creality Ender-3 V2 Neo 0.4 nozzle",
 		"Creality Ender-3 S1 0.4 nozzle",
 		"Creality Ender-3 S1 Pro 0.4 nozzle",
+		"Creality Ender-3 S1 Plus 0.2 nozzle",
+		"Creality Ender-3 S1 Plus 0.4 nozzle",
+		"Creality Ender-3 S1 Plus 0.6 nozzle",
+		"Creality Ender-3 S1 Plus 0.8 nozzle",
 		"Creality Ender-5 0.4 nozzle",
 		"Creality Ender-5 Plus 0.4 nozzle",
 		"Creality Ender-5 Pro (2019) 0.2 nozzle",
@@ -59,7 +63,10 @@
 		"Creality K1 (0.8 nozzle)",
 		"Creality K1 Max (0.4 nozzle)",
 		"Creality K1 Max (0.6 nozzle)",
-		"Creality K1 Max (0.8 nozzle)"
+		"Creality K1 Max (0.8 nozzle)",
-		
+		"Creality CR-10 SE 0.2 nozzle",
+		"Creality CR-10 SE 0.4 nozzle",
+		"Creality CR-10 SE 0.6 nozzle",
+		"Creality CR-10 SE 0.8 nozzle"		
 	]
 }

resources/profiles/Creality/filament/Creality Generic PLA @Ender-3V3-all.json

@@ -16,7 +16,10 @@
     "hot_plate_temp_initial_layer" : ["55"],
     "textured_plate_temp_initial_layer" : ["55"],
 	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle",
 		"Creality Ender-3 V3 SE 0.4 nozzle",
+		"Creality Ender-3 V3 SE 0.6 nozzle",
+		"Creality Ender-3 V3 SE 0.8 nozzle",
 		"Creality Ender-3 V3 KE 0.4 nozzle"
 	]
 }

resources/profiles/Creality/filament/Creality Generic PLA High Speed @Ender-3V3-all.json

@@ -9,7 +9,10 @@
         "23"
     ],
 	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle",
 		"Creality Ender-3 V3 SE 0.4 nozzle",
+		"Creality Ender-3 V3 SE 0.6 nozzle",
+		"Creality Ender-3 V3 SE 0.8 nozzle",
 		"Creality Ender-3 V3 KE 0.4 nozzle"
 	]
 }

resources/profiles/Creality/filament/Creality Generic PLA Matte @Ender-3V3-all.json

@@ -7,7 +7,10 @@
 	"inherits": "Creality Generic PLA @Ender-3V3-all",
 	"filament_max_volumetric_speed": ["18"],
 	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle",
 		"Creality Ender-3 V3 SE 0.4 nozzle",
+		"Creality Ender-3 V3 SE 0.6 nozzle",
+		"Creality Ender-3 V3 SE 0.8 nozzle",
 		"Creality Ender-3 V3 KE 0.4 nozzle"
 	]
 }

resources/profiles/Creality/filament/Creality Generic PLA Silk @Ender-3V3-all.json

@@ -7,7 +7,10 @@
 	"inherits": "Creality Generic PLA @Ender-3V3-all",
 	"filament_max_volumetric_speed": ["7.5"],
 	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle",
 		"Creality Ender-3 V3 SE 0.4 nozzle",
+		"Creality Ender-3 V3 SE 0.6 nozzle",
+		"Creality Ender-3 V3 SE 0.8 nozzle",
 		"Creality Ender-3 V3 KE 0.4 nozzle"
 	]
 }

resources/profiles/Creality/filament/Creality Generic PLA.json

@@ -32,6 +32,10 @@
 		"Creality Ender-3 V2 Neo 0.4 nozzle",
 		"Creality Ender-3 S1 0.4 nozzle",
 		"Creality Ender-3 S1 Pro 0.4 nozzle",
+		"Creality Ender-3 S1 Plus 0.2 nozzle",
+		"Creality Ender-3 S1 Plus 0.4 nozzle",
+		"Creality Ender-3 S1 Plus 0.6 nozzle",
+		"Creality Ender-3 S1 Plus 0.8 nozzle",
 		"Creality Ender-5 0.4 nozzle",
 		"Creality Ender-5 Plus 0.4 nozzle",
 		"Creality Ender-5 Pro (2019) 0.2 nozzle",
@@ -50,6 +54,10 @@
 		"Creality K1 (0.8 nozzle)",
 		"Creality K1 Max (0.4 nozzle)",
 		"Creality K1 Max (0.6 nozzle)",
-		"Creality K1 Max (0.8 nozzle)"
+		"Creality K1 Max (0.8 nozzle)",
+		"Creality CR-10 SE 0.2 nozzle",
+		"Creality CR-10 SE 0.4 nozzle",
+		"Creality CR-10 SE 0.6 nozzle",
+		"Creality CR-10 SE 0.8 nozzle"
 	]
 }

resources/profiles/Creality/filament/Creality Generic TPU @Ender-3V3-all.json

@@ -1,20 +1,23 @@
 {
-		"type": "filament",
+	"type": "filament",
-		"setting_id": "GFU99_CREALITY_00",
+	"setting_id": "GFU99_CREALITY_00",
-		"name": "Creality Generic TPU @Ender-3V3-all",
+	"name": "Creality Generic TPU @Ender-3V3-all",
-		"from": "system",
+	"from": "system",
-		"instantiation": "true",
+	"instantiation": "true",
-		"inherits": "Creality Generic TPU",
+	"inherits": "Creality Generic TPU",
-		"hot_plate_temp": ["30"],
+	"hot_plate_temp": ["30"],
-		"hot_plate_temp_initial_layer": ["30"],
+	"hot_plate_temp_initial_layer": ["30"],
-		"textured_plate_temp": ["30"],
+	"textured_plate_temp": ["30"],
-		"textured_plate_temp_initial_layer": ["30"],
+	"textured_plate_temp_initial_layer": ["30"],
-		"nozzle_temperature_initial_layer": ["230"],
+	"nozzle_temperature_initial_layer": ["230"],
-		"nozzle_temperature": ["230"],
+	"nozzle_temperature": ["230"],
-		"filament_max_volumetric_speed": ["3.5"],
+	"filament_max_volumetric_speed": ["3.5"],
-		"slow_down_layer_time": ["5"],
+	"slow_down_layer_time": ["5"],
-		"compatible_printers": [
+	"compatible_printers": [
-			"Creality Ender-3 V3 SE 0.4 nozzle",
+		"Creality Ender-3 V3 SE 0.2 nozzle",
-			"Creality Ender-3 V3 KE 0.4 nozzle"
+		"Creality Ender-3 V3 SE 0.4 nozzle",
-		]
+		"Creality Ender-3 V3 SE 0.6 nozzle",
+		"Creality Ender-3 V3 SE 0.8 nozzle",
+		"Creality Ender-3 V3 KE 0.4 nozzle"
+	]
 }

resources/profiles/Creality/filament/Creality Generic TPU.json

@@ -15,6 +15,10 @@
         "Creality K1 (0.8 nozzle)",
         "Creality K1 Max (0.4 nozzle)",
         "Creality K1 Max (0.6 nozzle)",
-        "Creality K1 Max (0.8 nozzle)"
+        "Creality K1 Max (0.8 nozzle)",
+        "Creality CR-10 SE 0.2 nozzle",
+		"Creality CR-10 SE 0.4 nozzle",
+		"Creality CR-10 SE 0.6 nozzle",
+		"Creality CR-10 SE 0.8 nozzle"
     ]
 }

resources/profiles/Creality/filament/Creality HF Generic PLA.json

@@ -24,6 +24,10 @@
         "Creality K1 (0.8 nozzle)",
         "Creality K1 Max (0.4 nozzle)",
         "Creality K1 Max (0.6 nozzle)",
-        "Creality K1 Max (0.8 nozzle)"
+        "Creality K1 Max (0.8 nozzle)",
+        "Creality CR-10 SE 0.2 nozzle",
+		"Creality CR-10 SE 0.4 nozzle",
+		"Creality CR-10 SE 0.6 nozzle",
+		"Creality CR-10 SE 0.8 nozzle"
     ]
 }

resources/profiles/Creality/filament/Creality HF Generic Speed PLA.json

@@ -18,6 +18,10 @@
 		"Creality K1 (0.8 nozzle)",
 		"Creality K1 Max (0.4 nozzle)",
 		"Creality K1 Max (0.6 nozzle)",
-		"Creality K1 Max (0.8 nozzle)"
+		"Creality K1 Max (0.8 nozzle)",
+		"Creality CR-10 SE 0.2 nozzle",
+		"Creality CR-10 SE 0.4 nozzle",
+		"Creality CR-10 SE 0.6 nozzle",
+		"Creality CR-10 SE 0.8 nozzle"
 	]
 }

resources/profiles/Creality/machine/Creality CR-10 SE 0.2 nozzle.json

@@ -0,0 +1,128 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality CR-10 SE 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality CR-10 SE",
+    "printer_variant": "0.2",
+    "printer_structure": "i3",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.20mm Standard @Creality CR10SE 0.2",
+    "nozzle_diameter": [
+      "0.2"
+    ],
+    "printable_area": [
+      "0x0",
+      "250x0",
+      "250x250",
+      "0x250"
+    ],
+    "printable_height": "250",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_height_to_lid": "140",
+    "extruder_clearance_radius": "65",
+    "nozzle_type": "hardened_steel",
+    "support_air_filtration": "1",
+    "support_chamber_temp_control": "1",
+    "auxiliary_fan": "0",
+    "machine_max_acceleration_extruding": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_acceleration_travel": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_x": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_y": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_z": [
+      "500",
+      "200"
+    ],
+    "machine_max_acceleration_e": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_speed_e": [
+      "25",
+      "25"
+    ],
+    "machine_max_speed_x": [
+      "500",
+      "200"
+    ],
+    "machine_max_speed_y": [
+      "500",
+      "200"
+    ],
+    "machine_max_speed_z": [
+      "12",
+      "12"
+    ],
+    "machine_max_jerk_e": [
+      "2.5",
+      "2.5"
+    ],
+    "machine_max_jerk_x": [
+      "9",
+      "9"
+    ],
+    "machine_max_jerk_y": [
+      "9",
+      "9"
+    ],
+    "machine_max_jerk_z": [
+      "0.2",
+      "0.4"
+    ],
+    "max_layer_height": [
+      "0.32"
+    ],
+    "min_layer_height": [
+      "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+      "2"
+    ],
+    "retract_before_wipe": [
+      "70%"
+    ],
+    "retraction_length": [
+      "0.8"
+    ],
+    "retract_length_toolchange": [
+      "2"
+    ],
+    "retraction_speed": [
+      "30"
+    ],
+    "deretraction_speed": [
+      "40"
+    ],
+    "single_extruder_multi_material": "1",
+    "change_filament_gcode": "M600",
+    "machine_pause_gcode": "M25",
+    "default_filament_profile": [
+      "Creality Generic PLA"
+    ],
+    "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[material_print_temperature_layer_0] \nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+    "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
+    "scan_first_layer": "0",
+    "thumbnails": [
+      "96x96",
+      "300x300"
+    ]
+}

resources/profiles/Creality/machine/Creality CR-10 SE 0.4 nozzle.json

@@ -0,0 +1,128 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality CR-10 SE 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality CR-10 SE",
+    "printer_variant": "0.4",
+    "printer_structure": "i3",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.20mm Standard @Creality CR10SE 0.4",
+    "nozzle_diameter": [
+      "0.4"
+    ],
+    "printable_area": [
+      "0x0",
+      "250x0",
+      "250x250",
+      "0x250"
+    ],
+    "printable_height": "250",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_height_to_lid": "140",
+    "extruder_clearance_radius": "65",
+    "nozzle_type": "hardened_steel",
+    "support_air_filtration": "1",
+    "support_chamber_temp_control": "1",
+    "auxiliary_fan": "0",
+    "machine_max_acceleration_extruding": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_acceleration_travel": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_x": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_y": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_z": [
+      "500",
+      "200"
+    ],
+    "machine_max_acceleration_e": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_speed_e": [
+      "25",
+      "25"
+    ],
+    "machine_max_speed_x": [
+      "500",
+      "200"
+    ],
+    "machine_max_speed_y": [
+      "500",
+      "200"
+    ],
+    "machine_max_speed_z": [
+      "12",
+      "12"
+    ],
+    "machine_max_jerk_e": [
+      "2.5",
+      "2.5"
+    ],
+    "machine_max_jerk_x": [
+      "9",
+      "9"
+    ],
+    "machine_max_jerk_y": [
+      "9",
+      "9"
+    ],
+    "machine_max_jerk_z": [
+      "0.2",
+      "0.4"
+    ],
+    "max_layer_height": [
+      "0.32"
+    ],
+    "min_layer_height": [
+      "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+      "2"
+    ],
+    "retract_before_wipe": [
+      "70%"
+    ],
+    "retraction_length": [
+      "0.8"
+    ],
+    "retract_length_toolchange": [
+      "2"
+    ],
+    "retraction_speed": [
+      "30"
+    ],
+    "deretraction_speed": [
+      "40"
+    ],
+    "single_extruder_multi_material": "1",
+    "change_filament_gcode": "M600",
+    "machine_pause_gcode": "M25",
+    "default_filament_profile": [
+      "Creality Generic PLA"
+    ],
+    "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[material_print_temperature_layer_0] \nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+    "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
+    "scan_first_layer": "0",
+    "thumbnails": [
+      "96x96",
+      "300x300"
+    ]
+}

resources/profiles/Creality/machine/Creality CR-10 SE 0.6 nozzle.json

@@ -0,0 +1,128 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality CR-10 SE 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality CR-10 SE",
+    "printer_variant": "0.6",
+    "printer_structure": "i3",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.20mm Standard @Creality CR10SE 0.6",
+    "nozzle_diameter": [
+      "0.6"
+    ],
+    "printable_area": [
+      "0x0",
+      "250x0",
+      "250x250",
+      "0x250"
+    ],
+    "printable_height": "250",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_height_to_lid": "140",
+    "extruder_clearance_radius": "65",
+    "nozzle_type": "hardened_steel",
+    "support_air_filtration": "1",
+    "support_chamber_temp_control": "1",
+    "auxiliary_fan": "0",
+    "machine_max_acceleration_extruding": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_acceleration_travel": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_x": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_y": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_z": [
+      "500",
+      "200"
+    ],
+    "machine_max_acceleration_e": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_speed_e": [
+      "25",
+      "25"
+    ],
+    "machine_max_speed_x": [
+      "500",
+      "200"
+    ],
+    "machine_max_speed_y": [
+      "500",
+      "200"
+    ],
+    "machine_max_speed_z": [
+      "12",
+      "12"
+    ],
+    "machine_max_jerk_e": [
+      "2.5",
+      "2.5"
+    ],
+    "machine_max_jerk_x": [
+      "9",
+      "9"
+    ],
+    "machine_max_jerk_y": [
+      "9",
+      "9"
+    ],
+    "machine_max_jerk_z": [
+      "0.2",
+      "0.4"
+    ],
+    "max_layer_height": [
+      "0.32"
+    ],
+    "min_layer_height": [
+      "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+      "2"
+    ],
+    "retract_before_wipe": [
+      "70%"
+    ],
+    "retraction_length": [
+      "0.8"
+    ],
+    "retract_length_toolchange": [
+      "2"
+    ],
+    "retraction_speed": [
+      "30"
+    ],
+    "deretraction_speed": [
+      "40"
+    ],
+    "single_extruder_multi_material": "1",
+    "change_filament_gcode": "M600",
+    "machine_pause_gcode": "M25",
+    "default_filament_profile": [
+      "Creality Generic PLA"
+    ],
+    "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[material_print_temperature_layer_0] \nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+    "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
+    "scan_first_layer": "0",
+    "thumbnails": [
+      "96x96",
+      "300x300"
+    ]
+}

resources/profiles/Creality/machine/Creality CR-10 SE 0.8 nozzle.json

@@ -0,0 +1,128 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality CR-10 SE 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality CR-10 SE",
+    "printer_variant": "0.8",
+    "printer_structure": "i3",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.20mm Standard @Creality CR10SE 0.8",
+    "nozzle_diameter": [
+      "0.8"
+    ],
+    "printable_area": [
+      "0x0",
+      "250x0",
+      "250x250",
+      "0x250"
+    ],
+    "printable_height": "250",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_height_to_lid": "140",
+    "extruder_clearance_radius": "65",
+    "nozzle_type": "hardened_steel",
+    "support_air_filtration": "1",
+    "support_chamber_temp_control": "1",
+    "auxiliary_fan": "0",
+    "machine_max_acceleration_extruding": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_acceleration_travel": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_x": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_y": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_z": [
+      "500",
+      "200"
+    ],
+    "machine_max_acceleration_e": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_speed_e": [
+      "25",
+      "25"
+    ],
+    "machine_max_speed_x": [
+      "500",
+      "200"
+    ],
+    "machine_max_speed_y": [
+      "500",
+      "200"
+    ],
+    "machine_max_speed_z": [
+      "12",
+      "12"
+    ],
+    "machine_max_jerk_e": [
+      "2.5",
+      "2.5"
+    ],
+    "machine_max_jerk_x": [
+      "9",
+      "9"
+    ],
+    "machine_max_jerk_y": [
+      "9",
+      "9"
+    ],
+    "machine_max_jerk_z": [
+      "0.2",
+      "0.4"
+    ],
+    "max_layer_height": [
+      "0.32"
+    ],
+    "min_layer_height": [
+      "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+      "2"
+    ],
+    "retract_before_wipe": [
+      "70%"
+    ],
+    "retraction_length": [
+      "0.8"
+    ],
+    "retract_length_toolchange": [
+      "2"
+    ],
+    "retraction_speed": [
+      "30"
+    ],
+    "deretraction_speed": [
+      "40"
+    ],
+    "single_extruder_multi_material": "1",
+    "change_filament_gcode": "M600",
+    "machine_pause_gcode": "M25",
+    "default_filament_profile": [
+      "Creality Generic PLA"
+    ],
+    "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[material_print_temperature_layer_0] \nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+    "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
+    "scan_first_layer": "0",
+    "thumbnails": [
+      "96x96",
+      "300x300"
+    ]
+}

resources/profiles/Creality/machine/Creality CR-10 SE.json

@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality CR-10 SE",
+    "model_id": "Creality-CR-10SE",
+    "nozzle_diameter": "0.2;0.4;0.6;0.8",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_cr10se_buildplate_model.stl",
+    "bed_texture": "creality_cr10se_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PETG;Creality Generic TPU;Creality Generic ABS"
+}

resources/profiles/Creality/machine/Creality Ender-3 Pro 0.4 nozzle.json

@@ -8,7 +8,7 @@
 	"printer_model": "Creality Ender-3 Pro",
 	"printer_variant": "0.4",
 	"printer_structure": "i3",
-	"default_print_profile": "0.20mm Standard @Creality Ender3 Pro",
+	"default_print_profile": "0.20mm Standard @Creality Ender3 Pro 0.4",
 	"thumbnails": [""],
 	"nozzle_diameter": [
 		"0.4"

resources/profiles/Creality/machine/Creality Ender-3 S1 Plus 0.2 nozzle.json

@@ -0,0 +1,117 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 S1 Plus 0.2 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 S1 Plus",
+	"printer_variant": "0.2",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3S1Plus 0.2",
+	"nozzle_diameter": [
+		"0.2"
+	],
+	"printable_area": [
+		"0x0",
+		"300x0",
+		"300x300",
+		"0x300"
+	],
+	"printable_height": "300",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.36"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retraction_length": [
+		"0.4"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"retraction_speed": [
+		"45"
+	],
+	"deretraction_speed": [
+		"45"
+	],
+	"z_hop": [
+		"0"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling \nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}

resources/profiles/Creality/machine/Creality Ender-3 S1 Plus 0.4 nozzle.json

@@ -0,0 +1,117 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 S1 Plus 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 S1 Plus",
+	"printer_variant": "0.4",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3S1Plus 0.4",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"300x0",
+		"300x300",
+		"0x300"
+	],
+	"printable_height": "300",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.36"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retraction_length": [
+		"0.4"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"retraction_speed": [
+		"45"
+	],
+	"deretraction_speed": [
+		"45"
+	],
+	"z_hop": [
+		"0"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}

resources/profiles/Creality/machine/Creality Ender-3 S1 Plus 0.6 nozzle.json

@@ -0,0 +1,117 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 S1 Plus 0.6 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 S1 Plus",
+	"printer_variant": "0.6",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3S1Plus 0.6",
+	"nozzle_diameter": [
+		"0.6"
+	],
+	"printable_area": [
+		"0x0",
+		"300x0",
+		"300x300",
+		"0x300"
+	],
+	"printable_height": "300",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.36"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retraction_length": [
+		"0.4"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"retraction_speed": [
+		"45"
+	],
+	"deretraction_speed": [
+		"45"
+	],
+	"z_hop": [
+		"0"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}

resources/profiles/Creality/machine/Creality Ender-3 S1 Plus 0.8 nozzle.json

@@ -0,0 +1,117 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 S1 Plus 0.8 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 S1 Plus",
+	"printer_variant": "0.8",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3S1Plus 0.8",
+	"nozzle_diameter": [
+		"0.8"
+	],
+	"printable_area": [
+		"0x0",
+		"3000x0",
+		"300x300",
+		"0x300"
+	],
+	"printable_height": "300",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.36"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retraction_length": [
+		"0.4"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"retraction_speed": [
+		"45"
+	],
+	"deretraction_speed": [
+		"45"
+	],
+	"z_hop": [
+		"0"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}

resources/profiles/Creality/machine/Creality Ender-3 S1 Plus.json

@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality Ender-3 S1 Plus",
+    "model_id": "Creality-Ender3-S1-Plus",
+    "nozzle_diameter": "0.2;0.4;0.6;0.8",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_ender3s1plus_buildplate_model.stl",
+    "bed_texture": "creality_ender3s1plus_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
+}

resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json

@@ -0,0 +1,124 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"printer_settings_id": "Creality",
+	"name": "Creality Ender-3 V3 SE 0.2 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 V3 SE",
+	"printer_variant": "0.2",
+	"gcode_flavor": "marlin2",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3V3SE 0.2",
+	"extruder_clearance_height_to_rod": "47",
+    "extruder_clearance_max_radius": "90",
+    "extruder_clearance_radius": "90",
+    "machine_load_filament_time": "11",
+	"nozzle_diameter": [
+		"0.2"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "250",
+	"nozzle_type": "brass",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"2500",
+		"2500"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_e": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"30",
+		"30"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_y": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"1.2"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"retraction_speed": [
+		"30"
+	],
+	"deretraction_speed": [
+		"30"
+	],
+	"single_extruder_multi_material": "1",
+	"manual_filament_change": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA @Ender-3V3-all"
+	],
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0  ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+	"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"96x96",
+		"300x300"
+	]
+}

resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json

@@ -7,6 +7,7 @@
 	"instantiation": "true",
 	"inherits": "fdm_creality_common",
 	"printer_model": "Creality Ender-3 V3 SE",
+	"printer_variant": "0.4",
 	"gcode_flavor": "marlin2",
 	"printer_structure": "i3",
 	"default_print_profile": "0.20mm Standard @Creality Ender3V3SE",
@@ -113,7 +114,7 @@
 	"default_filament_profile": [
 		"Creality Generic PLA @Ender-3V3-all"
 	],
-	"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \n \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0  ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0  ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
 	"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
 	"scan_first_layer": "0",
 	"thumbnails": [

resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json

@@ -0,0 +1,124 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"printer_settings_id": "Creality",
+	"name": "Creality Ender-3 V3 SE 0.6 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 V3 SE",
+	"printer_variant": "0.6",
+	"gcode_flavor": "marlin2",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3V3SE 0.6",
+	"extruder_clearance_height_to_rod": "47",
+    "extruder_clearance_max_radius": "90",
+    "extruder_clearance_radius": "90",
+    "machine_load_filament_time": "11",
+	"nozzle_diameter": [
+		"0.6"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "250",
+	"nozzle_type": "brass",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"2500",
+		"2500"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_e": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"30",
+		"30"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_y": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"1.2"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"retraction_speed": [
+		"30"
+	],
+	"deretraction_speed": [
+		"30"
+	],
+	"single_extruder_multi_material": "1",
+	"manual_filament_change": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA @Ender-3V3-all"
+	],
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0  ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+	"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"96x96",
+		"300x300"
+	]
+}

resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json

@@ -0,0 +1,124 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"printer_settings_id": "Creality",
+	"name": "Creality Ender-3 V3 SE 0.8 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 V3 SE",
+	"printer_variant": "0.8",
+	"gcode_flavor": "marlin2",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3V3SE 0.8",
+	"extruder_clearance_height_to_rod": "47",
+    "extruder_clearance_max_radius": "90",
+    "extruder_clearance_radius": "90",
+    "machine_load_filament_time": "11",
+	"nozzle_diameter": [
+		"0.8"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "250",
+	"nozzle_type": "brass",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"2500",
+		"2500"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_e": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"30",
+		"30"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_y": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"1.2"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"retraction_speed": [
+		"30"
+	],
+	"deretraction_speed": [
+		"30"
+	],
+	"single_extruder_multi_material": "1",
+	"manual_filament_change": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA @Ender-3V3-all"
+	],
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0  ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+	"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"96x96",
+		"300x300"
+	]
+}

resources/profiles/Creality/machine/Creality Ender-3 V3 SE.json

@@ -2,7 +2,7 @@
     "type": "machine_model",
     "name": "Creality Ender-3 V3 SE",
     "model_id": "Creality-Ender3-V3-SE",
-    "nozzle_diameter": "0.4",
+    "nozzle_diameter": "0.2;0.4;0.6;0.8",
     "machine_tech": "FFF",
     "family": "Creality",
     "bed_model": "creality_ender3v3se_buildplate_model.stl",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json

@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality Ender3V3SE 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.46",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.46",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "4",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "25",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "8",
+	"outer_wall_jerk": "20",
+	"inner_wall_jerk": "20",
+	"infill_jerk": "20",
+	"top_surface_jerk": "20",
+	"initial_layer_jerk": "8",
+	"travel_jerk": "8",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle"
+	]
+}

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json

@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality Ender3V3SE 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.46",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.46",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "4",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "25",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "8",
+	"outer_wall_jerk": "20",
+	"inner_wall_jerk": "20",
+	"infill_jerk": "20",
+	"top_surface_jerk": "20",
+	"initial_layer_jerk": "8",
+	"travel_jerk": "8",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.6 nozzle"
+	]
+}

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json

@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality Ender3V3SE 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.46",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.46",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "4",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "25",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "8",
+	"outer_wall_jerk": "20",
+	"inner_wall_jerk": "20",
+	"infill_jerk": "20",
+	"top_surface_jerk": "20",
+	"initial_layer_jerk": "8",
+	"travel_jerk": "8",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.8 nozzle"
+	]
+}

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE.json

@@ -113,6 +113,6 @@
 	"initial_layer_jerk": "8",
 	"travel_jerk": "8",
 	"compatible_printers": [
-		"Creality Ender-3 V3 SE 0.4 nozzle"
+		"Creality Ender-3 V3 SE"
 	]
 }

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json

@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3S1Plus 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.2 nozzle"
+	]
+}

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json

@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3S1Plus 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.4 nozzle"
+	]
+}

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json

@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3S1Plus 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.6 nozzle"
+	]
+}

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json

@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3S1Plus 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.8 nozzle"
+	]
+}

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json

@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3V3SE 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.46",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.46",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "25",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "6",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "8",
+	"outer_wall_jerk": "20",
+	"inner_wall_jerk": "20",
+	"infill_jerk": "20",
+	"top_surface_jerk": "20",
+	"initial_layer_jerk": "8",
+	"travel_jerk": "8",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle"
+	]
+}

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json

@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3V3SE 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.46",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.46",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "25",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "6",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "8",
+	"outer_wall_jerk": "20",
+	"inner_wall_jerk": "20",
+	"infill_jerk": "20",
+	"top_surface_jerk": "20",
+	"initial_layer_jerk": "8",
+	"travel_jerk": "8",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.6 nozzle"
+	]
+}

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json

@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3V3SE 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.46",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.46",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "25",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "6",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "8",
+	"outer_wall_jerk": "20",
+	"inner_wall_jerk": "20",
+	"infill_jerk": "20",
+	"top_surface_jerk": "20",
+	"initial_layer_jerk": "8",
+	"travel_jerk": "8",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.8 nozzle"
+	]
+}

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE.json

@@ -113,6 +113,6 @@
 	"initial_layer_jerk": "8",
 	"travel_jerk": "8",
 	"compatible_printers": [
-		"Creality Ender-3 V3 SE 0.4 nozzle"
+		"Creality Ender-3 V3 SE"
 	]
 }

resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json

@@ -0,0 +1,44 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality CR10SE 0.2",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+    "bottom_shell_layers": "4",
+    "infill_combination": "1",
+    "infill_wall_overlap": "20%",
+    "initial_layer_acceleration": "3000",
+    "initial_layer_infill_speed": "150",
+    "initial_layer_travel_speed": "120",
+    "inner_wall_speed": "300",
+    "internal_solid_infill_line_width": "0.45",
+    "internal_solid_infill_speed": "300",
+    "outer_wall_acceleration": "2300",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "overhang_3_4_speed": "35",
+    "reduce_crossing_wall": "1",
+    "seam_gap": "15%",
+    "skirt_distance": "8",
+    "skirt_loops": "1",
+    "slow_down_layers": "2",
+    "sparse_infill_density": "10%",
+    "sparse_infill_speed": "300",
+    "support_base_pattern_spacing": "4",
+    "support_bottom_z_distance": "0.4",
+    "support_interface_bottom_layers": "1",
+    "support_interface_pattern": "rectilinear",
+    "support_interface_top_layers": "1",
+    "support_line_width": "0.42",
+    "support_object_xy_distance": "0.8",
+    "support_style": "snug",
+    "support_threshold_angle": "60",
+    "top_surface_line_width": "0.42",
+    "top_surface_speed": "120",
+    "travel_acceleration": "5000",
+    "wall_loops": "2",
+    "compatible_printers": [
+        "Creality CR-10 SE 0.2 nozzle"
+    ]
+}

resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json

@@ -0,0 +1,44 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality CR10SE 0.4",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+    "bottom_shell_layers": "4",
+    "infill_combination": "1",
+    "infill_wall_overlap": "20%",
+    "initial_layer_acceleration": "3000",
+    "initial_layer_infill_speed": "150",
+    "initial_layer_travel_speed": "120",
+    "inner_wall_speed": "300",
+    "internal_solid_infill_line_width": "0.45",
+    "internal_solid_infill_speed": "300",
+    "outer_wall_acceleration": "2300",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "overhang_3_4_speed": "35",
+    "reduce_crossing_wall": "1",
+    "seam_gap": "15%",
+    "skirt_distance": "8",
+    "skirt_loops": "1",
+    "slow_down_layers": "2",
+    "sparse_infill_density": "10%",
+    "sparse_infill_speed": "300",
+    "support_base_pattern_spacing": "4",
+    "support_bottom_z_distance": "0.4",
+    "support_interface_bottom_layers": "1",
+    "support_interface_pattern": "rectilinear",
+    "support_interface_top_layers": "1",
+    "support_line_width": "0.42",
+    "support_object_xy_distance": "0.8",
+    "support_style": "snug",
+    "support_threshold_angle": "60",
+    "top_surface_line_width": "0.42",
+    "top_surface_speed": "120",
+    "travel_acceleration": "5000",
+    "wall_loops": "2",
+    "compatible_printers": [
+        "Creality CR-10 SE 0.4 nozzle"
+    ]
+}

resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json

@@ -0,0 +1,44 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality CR10SE 0.6",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+    "bottom_shell_layers": "4",
+    "infill_combination": "1",
+    "infill_wall_overlap": "20%",
+    "initial_layer_acceleration": "3000",
+    "initial_layer_infill_speed": "150",
+    "initial_layer_travel_speed": "120",
+    "inner_wall_speed": "300",
+    "internal_solid_infill_line_width": "0.45",
+    "internal_solid_infill_speed": "300",
+    "outer_wall_acceleration": "2300",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "overhang_3_4_speed": "35",
+    "reduce_crossing_wall": "1",
+    "seam_gap": "15%",
+    "skirt_distance": "8",
+    "skirt_loops": "1",
+    "slow_down_layers": "2",
+    "sparse_infill_density": "10%",
+    "sparse_infill_speed": "300",
+    "support_base_pattern_spacing": "4",
+    "support_bottom_z_distance": "0.4",
+    "support_interface_bottom_layers": "1",
+    "support_interface_pattern": "rectilinear",
+    "support_interface_top_layers": "1",
+    "support_line_width": "0.42",
+    "support_object_xy_distance": "0.8",
+    "support_style": "snug",
+    "support_threshold_angle": "60",
+    "top_surface_line_width": "0.42",
+    "top_surface_speed": "120",
+    "travel_acceleration": "5000",
+    "wall_loops": "2",
+    "compatible_printers": [
+        "Creality CR-10 SE 0.6 nozzle"
+    ]
+}

resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json

@@ -0,0 +1,44 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality CR10SE 0.8",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+    "bottom_shell_layers": "4",
+    "infill_combination": "1",
+    "infill_wall_overlap": "20%",
+    "initial_layer_acceleration": "3000",
+    "initial_layer_infill_speed": "150",
+    "initial_layer_travel_speed": "120",
+    "inner_wall_speed": "300",
+    "internal_solid_infill_line_width": "0.45",
+    "internal_solid_infill_speed": "300",
+    "outer_wall_acceleration": "2300",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "overhang_3_4_speed": "35",
+    "reduce_crossing_wall": "1",
+    "seam_gap": "15%",
+    "skirt_distance": "8",
+    "skirt_loops": "1",
+    "slow_down_layers": "2",
+    "sparse_infill_density": "10%",
+    "sparse_infill_speed": "300",
+    "support_base_pattern_spacing": "4",
+    "support_bottom_z_distance": "0.4",
+    "support_interface_bottom_layers": "1",
+    "support_interface_pattern": "rectilinear",
+    "support_interface_top_layers": "1",
+    "support_line_width": "0.42",
+    "support_object_xy_distance": "0.8",
+    "support_style": "snug",
+    "support_threshold_angle": "60",
+    "top_surface_line_width": "0.42",
+    "top_surface_speed": "120",
+    "travel_acceleration": "5000",
+    "wall_loops": "2",
+    "compatible_printers": [
+        "Creality CR-10 SE 0.8 nozzle"
+    ]
+}

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json

@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3S1Plus 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.2 nozzle"
+	]
+}

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json

@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3S1Plus 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.4 nozzle"
+	]
+}

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json

@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3S1Plus 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.6 nozzle"
+	]
+}

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json

@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3S1Plus 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.8 nozzle"
+	]
+}

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json

@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3V3SE 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.46",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.46",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "25",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "8",
+	"outer_wall_jerk": "20",
+	"inner_wall_jerk": "20",
+	"infill_jerk": "20",
+	"top_surface_jerk": "20",
+	"initial_layer_jerk": "8",
+	"travel_jerk": "8",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle"
+	]
+}

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json

@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3V3SE 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.46",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.46",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "25",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "8",
+	"outer_wall_jerk": "20",
+	"inner_wall_jerk": "20",
+	"infill_jerk": "20",
+	"top_surface_jerk": "20",
+	"initial_layer_jerk": "8",
+	"travel_jerk": "8",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.6 nozzle"
+	]
+}

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json

@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3V3SE 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.46",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.46",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "25",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "8",
+	"outer_wall_jerk": "20",
+	"inner_wall_jerk": "20",
+	"infill_jerk": "20",
+	"top_surface_jerk": "20",
+	"initial_layer_jerk": "8",
+	"travel_jerk": "8",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.8 nozzle"
+	]
+}

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE.json

@@ -113,6 +113,6 @@
 	"initial_layer_jerk": "8",
 	"travel_jerk": "8",
 	"compatible_printers": [
-		"Creality Ender-3 V3 SE 0.4 nozzle"
+		"Creality Ender-3 V3 SE"
 	]
 }

resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json

@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3S1Plus 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "10%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "1",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "20",
+	"initial_layer_infill_speed": "25",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.2 nozzle"
+	]
+}

resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json

@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3S1Plus 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "10%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "1",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "20",
+	"initial_layer_infill_speed": "25",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.4 nozzle"
+	]
+}

resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json

@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3S1Plus 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "10%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "1",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "20",
+	"initial_layer_infill_speed": "25",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.6 nozzle"
+	]
+}

resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json

@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3S1Plus 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "10%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "1",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "20",
+	"initial_layer_infill_speed": "25",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.8 nozzle"
+	]
+}

resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json

@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3V3SE 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.46",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.46",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "25",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "8",
+	"outer_wall_jerk": "20",
+	"inner_wall_jerk": "20",
+	"infill_jerk": "20",
+	"top_surface_jerk": "20",
+	"initial_layer_jerk": "8",
+	"travel_jerk": "8",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle"
+	]
+}

resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json

@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3V3SE 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.46",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.46",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "25",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "8",
+	"outer_wall_jerk": "20",
+	"inner_wall_jerk": "20",
+	"infill_jerk": "20",
+	"top_surface_jerk": "20",
+	"initial_layer_jerk": "8",
+	"travel_jerk": "8",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.6 nozzle"
+	]
+}

resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json

@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3V3SE 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.46",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.46",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "25",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "8",
+	"outer_wall_jerk": "20",
+	"inner_wall_jerk": "20",
+	"infill_jerk": "20",
+	"top_surface_jerk": "20",
+	"initial_layer_jerk": "8",
+	"travel_jerk": "8",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.8 nozzle"
+	]
+}

resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE.json

@@ -113,6 +113,6 @@
 	"initial_layer_jerk": "8",
 	"travel_jerk": "8",
 	"compatible_printers": [
-		"Creality Ender-3 V3 SE 0.4 nozzle"
+		"Creality Ender-3 V3 SE"
 	]
 }

resources/profiles/Custom.json

@@ -1,6 +1,6 @@
 {
     "name": "Custom Printer",
-    "version": "02.00.01.00",
+    "version": "02.00.02.00",
     "force_update": "0",
     "description": "My configurations",
     "machine_model_list": [

resources/profiles/Elegoo.json

@@ -1,6 +1,6 @@
 {
 	"name": "Elegoo",
-	"version": "02.00.01.00",
+	"version": "02.00.02.00",
 	"force_update": "0",
 	"description": "Elegoo configurations",
 	"machine_model_list": [

resources/profiles/FLSun.json

@@ -1,6 +1,6 @@
 {
     "name": "FLSun",
-    "version": "02.00.01.00",
+    "version": "02.00.02.00",
     "force_update": "0",
     "description": "FLSun configurations",
     "machine_model_list": [