update version to beta3

Change infill density from 20% to 15% to reduce warp risk for large
objects.

Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I48d616b2f07ee93784d12c7d84b83fdb451e5cc1

src/libslic3r/PerimeterGenerator.cpp

@@ -1310,6 +1310,22 @@ void PerimeterGenerator::process_arachne()
             }
         }
 
+        
+        if (this->print_config->wall_infill_order == WallInfillOrder::InnerOuterInnerInfill) {
+            if (ordered_extrusions.size() > 1) {
+                std::vector<int> extPs;
+                for (int i = 0; i < ordered_extrusions.size(); ++i) {
+                    if (ordered_extrusions[i].extrusion->inset_idx == 0)
+                        extPs.push_back(i);
+                }
+                for (int i = 0; i < extPs.size(); ++i) {
+                    if (extPs[i] == 0 || (i > 0 && extPs[i] - 1 == extPs[i - 1]))
+                        continue;
+                    std::swap(ordered_extrusions[extPs[i]], ordered_extrusions[extPs[i] - 1]);
+                }
+            }
+        }
+        
         if (ExtrusionEntityCollection extrusion_coll = traverse_extrusions(*this, ordered_extrusions); !extrusion_coll.empty())
             this->loops->append(extrusion_coll);
 

src/libslic3r/Preset.cpp

@@ -346,7 +346,6 @@ void Preset::normalize(DynamicPrintConfig &config)
         }
     }
 
-
     handle_legacy_sla(config);
 }
 
@@ -718,11 +717,10 @@ static std::vector<std::string> s_Preset_print_options {
 #ifdef HAS_PRESSURE_EQUALIZER
     "max_volumetric_extrusion_rate_slope_positive", "max_volumetric_extrusion_rate_slope_negative",
 #endif /* HAS_PRESSURE_EQUALIZER */
-    "inner_wall_speed", "outer_wall_speed", "small_perimeter_speed", "small_perimeter_threshold", "sparse_infill_speed", "internal_solid_infill_speed",
+    "inner_wall_speed", "outer_wall_speed", "sparse_infill_speed", "internal_solid_infill_speed",
     "top_surface_speed", "support_speed", "support_object_xy_distance", "support_interface_speed",
-    "bridge_speed", "bridge_angle", "filter_out_gap_fill", "gap_infill_speed", "travel_speed", "travel_speed_z", "initial_layer_speed",
+    "bridge_speed", "gap_infill_speed", "travel_speed", "travel_speed_z", "initial_layer_speed",
-    "outer_wall_acceleration", "inner_wall_acceleration", "initial_layer_acceleration", "top_surface_acceleration", "default_acceleration", "travel_acceleration", "skirt_loops", "skirt_distance", "skirt_height", "draft_shield",
+    "outer_wall_acceleration", "initial_layer_acceleration", "top_surface_acceleration", "default_acceleration", "skirt_loops", "skirt_distance", "skirt_height", "draft_shield",
-    "default_jerk", "outer_wall_jerk", "inner_wall_jerk", "top_surface_jerk", "initial_layer_jerk","travel_jerk",
     "brim_width", "brim_object_gap", "brim_type", "enable_support", "support_type", "support_threshold_angle", "enforce_support_layers",
     "raft_layers", "raft_first_layer_density", "raft_first_layer_expansion", "raft_contact_distance", "raft_expansion",
     "support_base_pattern", "support_base_pattern_spacing", "support_expansion", "support_style",
@@ -750,14 +748,16 @@ static std::vector<std::string> s_Preset_print_options {
      "timelapse_type", "internal_bridge_support_thickness",
      "wall_generator", "wall_transition_length", "wall_transition_filter_deviation", "wall_transition_angle",
      "wall_distribution_count", "min_feature_size", "min_bead_width",
-     //SoftFever
+     "small_perimeter_speed", "small_perimeter_threshold","bridge_angle", "filter_out_gap_fill", "travel_acceleration","inner_wall_acceleration",
+     "default_jerk", "outer_wall_jerk", "inner_wall_jerk", "top_surface_jerk", "initial_layer_jerk","travel_jerk",
      "top_solid_infill_flow_ratio","bottom_solid_infill_flow_ratio","only_one_wall_first_layer"
 };
 
 static std::vector<std::string> s_Preset_filament_options {
-    /*"filament_colour", */ "default_filament_colour","filament_diameter", "filament_type", "filament_soluble", "filament_is_support", "filament_max_volumetric_speed",
+    /*"filament_colour", */ "default_filament_colour","required_nozzle_HRC","filament_diameter", "filament_type", "filament_soluble", "filament_is_support",
-    "filament_flow_ratio", "enable_pressure_advance", "pressure_advance", "filament_density", "filament_cost", "filament_minimal_purge_on_wipe_tower",
+    "filament_max_volumetric_speed",
-    "chamber_temperature", "nozzle_temperature", "nozzle_temperature_initial_layer",
+    "filament_flow_ratio", "filament_density", "filament_cost", "filament_minimal_purge_on_wipe_tower",
+    "nozzle_temperature", "nozzle_temperature_initial_layer",
     // BBS
     "cool_plate_temp", "eng_plate_temp", "hot_plate_temp", "textured_plate_temp", "cool_plate_temp_initial_layer", "eng_plate_temp_initial_layer", "hot_plate_temp_initial_layer","textured_plate_temp_initial_layer",
     // "bed_type",
@@ -772,7 +772,9 @@ static std::vector<std::string> s_Preset_filament_options {
     "filament_vendor", "compatible_prints", "compatible_prints_condition", "compatible_printers", "compatible_printers_condition", "inherits",
     //BBS
     "filament_wipe_distance", "additional_cooling_fan_speed",
-    "bed_temperature_difference", "nozzle_temperature_range_low", "nozzle_temperature_range_high"
+    "bed_temperature_difference", "nozzle_temperature_range_low", "nozzle_temperature_range_high",
+    //SoftFever
+    "enable_pressure_advance", "pressure_advance","chamber_temperature"
 };
 
 static std::vector<std::string> s_Preset_machine_limits_options {
@@ -785,20 +787,19 @@ static std::vector<std::string> s_Preset_machine_limits_options {
 
 static std::vector<std::string> s_Preset_printer_options {
     "printer_technology",
-    "printable_area", "bed_exclude_area","bed_custom_texture", "bed_custom_model", "gcode_flavor", "z_lift_type",
+    "printable_area", "bed_exclude_area","bed_custom_texture", "bed_custom_model", "gcode_flavor",
     "single_extruder_multi_material", "machine_start_gcode", "machine_end_gcode", "before_layer_change_gcode", "layer_change_gcode", "change_filament_gcode",
     "printer_model", "printer_variant", "printable_height", "extruder_clearance_radius",  "extruder_clearance_max_radius","extruder_clearance_height_to_lid", "extruder_clearance_height_to_rod",
     "default_print_profile", "inherits",
     "silent_mode",
     // BBS
     "scan_first_layer", "machine_load_filament_time", "machine_unload_filament_time", "machine_pause_gcode", "template_custom_gcode",
-    "nozzle_type", "nozzle_hrc","nozzle_diameter", "auxiliary_fan", "nozzle_volume","upward_compatible_machine",
+    "nozzle_type", "nozzle_hrc","auxiliary_fan", "nozzle_volume","upward_compatible_machine",
     //SoftFever
     "host_type", "print_host", "printhost_apikey", 
     "printhost_cafile","printhost_port","printhost_authorization_type",
-        "printhost_user",
+    "printhost_user", "printhost_password", "printhost_ssl_ignore_revoke",
-    "printhost_password",
+    "z_lift_type", "thumbnails"
-    "printhost_ssl_ignore_revoke", "thumbnails"
 };
 
 static std::vector<std::string> s_Preset_sla_print_options {
@@ -2285,21 +2286,6 @@ void add_correct_opts_to_diff(const std::string &opt_key, t_config_option_keys&
     }
 }
 
-// template<class T>
-// void add_correct_opt_to_diff(const std::string &opt_key, t_config_option_keys& vec, const ConfigBase &other, const ConfigBase &this_c)
-// {
-//     const T* opt_init = static_cast<const T*>(other.option(opt_key));
-//     const T* opt_cur = static_cast<const T*>(this_c.option(opt_key));
-//     int opt_init_max_id = opt_init->values.size() - 1;
-//     for (int i = 0; i < int(opt_cur->values.size()); i++)
-//     {
-//         int init_id = i <= opt_init_max_id ? i : 0;
-//         if (opt_cur->values[i] != opt_init->values[init_id])
-//             vec.emplace_back(opt_key + "#" + std::to_string(i));
-//     }
-// }
-
-
 // Use deep_diff to correct return of changed options, considering individual options for each extruder.
 inline t_config_option_keys deep_diff(const ConfigBase &config_this, const ConfigBase &config_other)
 {
@@ -2323,7 +2309,6 @@ inline t_config_option_keys deep_diff(const ConfigBase &config_this, const Confi
                 case coBools:   add_correct_opts_to_diff<ConfigOptionBools      >(opt_key, diff, config_other, config_this);  break;
                 case coFloats:  add_correct_opts_to_diff<ConfigOptionFloats     >(opt_key, diff, config_other, config_this);  break;
                 case coStrings: add_correct_opts_to_diff<ConfigOptionStrings    >(opt_key, diff, config_other, config_this);  break;
-                // case coString:  add_correct_opts_to_diff<ConfigOptionString     >(opt_key, diff, config_other, config_this);  break;
                 case coPercents:add_correct_opts_to_diff<ConfigOptionPercents   >(opt_key, diff, config_other, config_this);  break;
                 case coPoints:  add_correct_opts_to_diff<ConfigOptionPoints     >(opt_key, diff, config_other, config_this);  break;
                 // BBS

src/libslic3r/PresetBundle.cpp

@@ -1340,7 +1340,7 @@ void PresetBundle::load_selections(AppConfig &config, const PresetPreferences& p
 void PresetBundle::export_selections(AppConfig &config)
 {
 	assert(this->printers.get_edited_preset().printer_technology() != ptFFF || filament_presets.size() >= 1);
-	assert(this->printers.get_edited_preset().printer_technology() != ptFFF || filament_presets.size() > 1 || filaments.get_selected_preset_name() == filament_presets.front());
+//	assert(this->printers.get_edited_preset().printer_technology() != ptFFF || filament_presets.size() > 1 || filaments.get_selected_preset_name() == filament_presets.front());
     config.clear_section("presets");
     config.set("presets", PRESET_PRINT_NAME,        prints.get_selected_preset_name());
     config.set("presets", PRESET_FILAMENT_NAME,     filament_presets.front());
@@ -3024,7 +3024,7 @@ std::pair<PresetsConfigSubstitutions, size_t> PresetBundle::load_vendor_configs_
             //parse error
             std::string subfile_path = path + "/" + vendor_name + "/" + subfile.second;
             BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(", got error when parse process setting from %1%") % subfile_path;
-            throw ConfigurationError((boost::format("Failed loading configuration file %1%\nSuggest cleaning the directory %2% firstly.\nReason: %3%") % subfile_path %vendor_system_path %reason).str());
+            throw ConfigurationError((boost::format("Failed loading configuration file %1%\nSuggest cleaning the directory %2% firstly") % subfile_path %vendor_system_path).str());
         }
     }
 
@@ -3501,4 +3501,4 @@ void PresetBundle::set_default_suppressed(bool default_suppressed)
     printers.set_default_suppressed(default_suppressed);
 }
 
-} // namespace Slic3r
+} // namespace Slic3r

src/slic3r/GUI/AboutDialog.cpp

@@ -240,8 +240,7 @@ AboutDialog::AboutDialog()
     // version
     {
         vesizer->Add(0, FromDIP(165), 1, wxEXPAND, FromDIP(5));
-        auto version_text = GUI_App::format_display_version();
+        auto version_string = _L("SoftFever Version") + " " + std::string(SoftFever_VERSION);
-        auto version_string = _L("SoftFever Version") + " " + std::string(version_text);
         wxStaticText* version = new wxStaticText(this, wxID_ANY, version_string.c_str(), wxDefaultPosition, wxDefaultSize);
         wxFont version_font = GetFont();
         #ifdef __WXMSW__

src/slic3r/GUI/MainFrame.cpp

@@ -1265,10 +1265,6 @@ bool MainFrame::can_send_gcode() const
 {
     if (m_plater && !m_plater->model().objects.empty())
     {
-        // BBL printer presets
-        if (!wxGetApp().preset_bundle->printers.get_edited_preset().is_custom_defined())
-            return false;
-
         auto cfg = wxGetApp().preset_bundle->printers.get_edited_preset().config;
         if (const auto *print_host_opt = cfg.option<ConfigOptionString>("print_host"); print_host_opt)
             return !print_host_opt->value.empty();

src/slic3r/GUI/Plater.cpp

@@ -1040,7 +1040,7 @@ void Sidebar::update_all_preset_comboboxes()
             p_mainframe->load_printer_url(host_url);
         }
 
-        m_bed_type_list->SelectAndNotify(btPEI);
+        m_bed_type_list->SelectAndNotify(btPEI-1);
         m_bed_type_list->Disable();
     }
 
@@ -11391,4 +11391,4 @@ SuppressBackgroundProcessingUpdate::~SuppressBackgroundProcessingUpdate()
     wxGetApp().plater()->schedule_background_process(m_was_scheduled);
 }
 
-}}    // namespace Slic3r::GUI
+}}    // namespace Slic3r::GUI

version.inc

@@ -10,5 +10,5 @@ endif()
 if(NOT DEFINED BBL_INTERNAL_TESTING)
 set(BBL_INTERNAL_TESTING "1")
 endif()
-set(SoftFever_VERSION "1.4.0 beta1")
+set(SoftFever_VERSION "1.4.0 beta3")
 set(SLIC3R_VERSION "01.04.00.17")