feat(profiles): add Lulzbot Mini 1 (#15476)

Adds the LulzBot Mini 1 (single extruder, 0.5 mm nozzle, 2.85 mm filament)
to the existing Lulzbot vendor, which previously shipped only TAZ models.

Values are taken from LulzBot's own current slicer configuration
(github.com/lulzbot3d/CuraLE) rather than estimated:

  - geometry and custom g-code from resources/definitions/single_mini_mini_1.def.json
    and resources/gcodes/mini_1/{mini_1_start,mini_1_end}.gcode
  - filament temperatures and cooling from resources/materials/*.xml.fdm_material,
    overridden by resources/quality/single_mini/<material>/*.inst.cfg

The start g-code reproduces the Mini's nozzle wipe and four-washer G29 probe,
with the filament-type temperature conditionals used by the sibling TAZ profiles.

One deliberate departure from current CuraLE: the pre-wipe retract is 30 mm,
the value used by Cura LE 4.13.x, rather than the 4 mm current CuraLE uses.
The Mini probes by electrical contact between nozzle and washer, so the nozzle
must stay clean through the wipe and all four touches. At 4 mm the melt zone
stays full and can ooze onto a washer, which caused auto-levelling failures on
hardware; 30 mm empties it. The cost is a ~24 s purge at print start.

The three filament presets follow docs/HLSD/filament_id.md rule 4: a vendor
tuning a generic material inherits Generic X @System, keeps the Generic X base
name and declares no filament_id, so identity stays with OrcaFilamentLibrary.
Their compatible_printers is the Mini alone, disjoint from Generic X @Lulzbot
(TAZ only) as rule 3 requires. They exist because temperature is a filament-scope
setting, so LulzBot's values need printer-scoped presets. All six plate types
carry the same temperature, because the Mini has a single bed and curr_bed_type
can hold a stale value carried over from another printer.

Strictly additive: no existing profile is modified, so TAZ behaviour is
unchanged and no migration is required. Lulzbot.json is bumped to 02.04.00.05.

Verified with scripts/orca_profile_tool.py check and scripts/check_profile.sh
on the full tree (profile tool, system validation, slice, filament subtypes and
custom-preset fixtures all pass), by diffing sliced output against LulzBot's own
Cura LE g-code for the same model and filament (temps, retraction, speeds and
the full wipe/probe sequence match), and by printing a 3DBenchy on a Mini 1 over
OctoPrint.


Claude-Session: https://claude.ai/code/session_012aLyqsXB7FKqwQdE2QF7Et

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>

.claude/skills/orca-profiles/references/naming.md

@@ -35,9 +35,10 @@ toolhead, a multi-material build) may drop the suffix — still an exact referen
 ## `process`
 
 `<layer height>mm <quality> @<target>` — [process-profiles.md](process-profiles.md#naming) has the
-quality ladder and the `fdm_process_*` base names. The `@<target>` is a human label, not a reference: it
+quality ladder and the `fdm_process_*` base names. The quality label stays before `@` and the printer
-usually does not equal a real variant, and compatibility comes from the resolved `compatible_printers`
+target after it: a printer model in the quality slot leaves the tier undescribed. The `@<target>` is a
-list or condition.
+human label, not a reference: it usually does not equal a real variant, and compatibility comes from the
+resolved `compatible_printers` list or condition.
 
 ## `filament`
 
@@ -58,6 +59,30 @@ to the first `@`; the target half is a label except for reserved forms:
   chosen at runtime
   ([color is a runtime property](filament-profiles.md#color-is-a-runtime-property)).
 
+## Checking names
+
+Check every newly added profile's `name` against its type and role: model, selectable preset or base.
+Apply the same checks to an intentional name change. The human-readable naming shapes are not enforced
+by `check`: inspect the added or renamed profiles in the diff, using neighbouring names as context and
+following the bundle's established style where the type-specific conventions allow variation.
+
+For bases (`instantiation: "false"`), use the type-specific conventions:
+
+| Type | Base names |
+| --- | --- |
+| `machine` | `fdm_machine_common`, `fdm_<vendor>_common`, or an established machine-family base name |
+| `process` | `fdm_process_*`, including shared roots and per-layer-height / per-nozzle bases such as `fdm_process_single_0.20` |
+| `filament` | `fdm_filament_*` material roots or `<Product> @base` product roots |
+
+Shared base names across bundles are intentional, including product roots such as `Fiberon PA6-CF @base`.
+Investigate a newly authored base that retains an unrelated selectable preset's name from a copy.
+
+**Name uniqueness is checked by CI.** `check_preset_name_uniqueness` checks type + name within each
+bundle. `check_machine_model_name_uniqueness` checks model names across the entire tree, even with
+`--vendor`: `Preset::get_printer_type` matches `printer_model` against all vendors' models and returns
+the first match, so a duplicate makes lookup depend on vendor order. Both run as part of
+`python3 scripts/orca_profile_tool.py check`.
+
 ## Not the same as the filename
 
 The loader keys off `name`, and a filename that disagrees usually still loads. Index `name` must equal the

.claude/skills/orca-profiles/references/review-checklist.md

@@ -17,6 +17,7 @@ The table highlights gaps that need human review. What CI *does* run:
 | A `renamed_from` whose old name is still a live preset | The redirect is inert while a live preset carries that name |
 | A preset differentiated only by color, or an all-printer library preset without `@System` | Per-color presets split one product across ids and the selector fills with near-duplicates; CI stays green |
 | Per-extruder vector length on a multi-nozzle printer | Silently padded (with the **first** value) or truncated |
+| A name that ignores its type's convention — a model in a `process` quality slot, or an unrelated target label left in a copied preset | The selector misrepresents the preset's quality or intended printer |
 
 ## 1. Was the vendor `version` bumped?
 
@@ -169,6 +170,15 @@ vendor, and a filename that disagrees with the preset's `name` (common; the load
 Check for Windows-invalid characters, reserved device names, trailing path-component spaces/dots,
 and case mismatches in `sub_path` or asset paths. See [cross-platform paths](validation.md#cross-platform-paths).
 
+## 16. Do the preset names follow the conventions?
+
+Check **every newly added profile and intentional name change**, including models and bases,
+against [the naming conventions](naming.md#checking-names). Preserve shipped names during
+ordinary tuning; renaming a shipped selectable preset requires the migration in item 4.
+
+*Why:* CI checks name uniqueness, but does not enforce the naming conventions. Catch naming
+mistakes before the names ship and existing projects depend on them.
+
 ---
 
 ## Reporting the review

CMakeLists.txt

@@ -826,37 +826,6 @@ find_package(OpenSSL REQUIRED)
 find_package(CURL REQUIRED)
 find_package(Freetype REQUIRED)
 
-if (SLIC3R_GUI)
-    # LibDataChannel's installed export references its bundled dependencies,
-    # but does not install their CMake targets. Recreate those targets from
-    # the same dependency prefix before loading the LibDataChannel config.
-    if (NOT TARGET Usrsctp::usrsctp)
-        find_library(_ORCA_USRSCTP_LIBRARY NAMES usrsctp
-            PATHS "${CMAKE_PREFIX_PATH}/lib" NO_DEFAULT_PATH)
-        if (_ORCA_USRSCTP_LIBRARY)
-            add_library(Usrsctp::usrsctp UNKNOWN IMPORTED GLOBAL)
-            set_target_properties(Usrsctp::usrsctp PROPERTIES
-                IMPORTED_LOCATION "${_ORCA_USRSCTP_LIBRARY}"
-                IMPORTED_LINK_INTERFACE_LANGUAGES C
-                INTERFACE_LINK_LIBRARIES "Threads::Threads")
-        endif()
-    endif()
-
-    if (NOT TARGET LibJuice::LibJuice)
-        find_library(_ORCA_LIBJUICE_LIBRARY NAMES juice
-            PATHS "${CMAKE_PREFIX_PATH}/lib" NO_DEFAULT_PATH)
-        if (_ORCA_LIBJUICE_LIBRARY)
-            add_library(LibJuice::LibJuice UNKNOWN IMPORTED GLOBAL)
-            set_target_properties(LibJuice::LibJuice PROPERTIES
-                IMPORTED_LOCATION "${_ORCA_LIBJUICE_LIBRARY}"
-                IMPORTED_LINK_INTERFACE_LANGUAGES C
-                INTERFACE_LINK_LIBRARIES "Threads::Threads")
-        endif()
-    endif()
-
-    find_package(LibDataChannel CONFIG REQUIRED)
-endif()
-
 
 add_library(libcurl INTERFACE)
 target_link_libraries(libcurl INTERFACE CURL::libcurl)
@@ -1137,7 +1106,6 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
     endif ()
     file(COPY ${_occt_dlls}
             ${CMAKE_PREFIX_PATH}/bin/freetype.dll
-            ${CMAKE_PREFIX_PATH}/bin/avformat-61.dll
             ${CMAKE_PREFIX_PATH}/bin/avcodec-61.dll
             ${CMAKE_PREFIX_PATH}/bin/swresample-5.dll
             ${CMAKE_PREFIX_PATH}/bin/swscale-8.dll
@@ -1150,7 +1118,6 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
         ${_out_dir}/WebView2Loader.dll
 
         ${_out_dir}/freetype.dll
-        ${_out_dir}/avformat-61.dll
         ${_out_dir}/avcodec-61.dll
         ${_out_dir}/swresample-5.dll
         ${_out_dir}/swscale-8.dll
@@ -1174,10 +1141,7 @@ function(orcaslicer_copy_sos target config postfix output_sos)
         set(_out_dir "${CMAKE_CURRENT_BINARY_DIR}")
     endif ()
 
-    file(COPY ${CMAKE_PREFIX_PATH}/lib/libavformat.so
+    file(COPY ${CMAKE_PREFIX_PATH}/lib/libavcodec.so
-            ${CMAKE_PREFIX_PATH}/lib/libavformat.so.61
-            ${CMAKE_PREFIX_PATH}/lib/libavformat.so.61.1.100
-            ${CMAKE_PREFIX_PATH}/lib/libavcodec.so
             ${CMAKE_PREFIX_PATH}/lib/libavcodec.so.61
             ${CMAKE_PREFIX_PATH}/lib/libavcodec.so.61.3.100
             ${CMAKE_PREFIX_PATH}/lib/libavutil.so
@@ -1192,9 +1156,6 @@ function(orcaslicer_copy_sos target config postfix output_sos)
          DESTINATION ${_out_dir})
 
     set(${output_sos}
-        ${_out_dir}/libavformat.so
-        ${_out_dir}/libavformat.so.61
-        ${_out_dir}/libavformat.so.61.1.100
         ${_out_dir}/libavcodec.so
         ${_out_dir}/libavcodec.so.61
         ${_out_dir}/libavcodec.so.61.3.100
@@ -1324,8 +1285,6 @@ endif ()
 
 if (CMAKE_SYSTEM_NAME STREQUAL "Linux")
     set(LIBRARY_FILES
-    ${LIBDIR_BIN}/libavformat.so.61
-    ${LIBDIR_BIN}/libavformat.so.61.1.100
     ${LIBDIR_BIN}/libavcodec.so.61
     ${LIBDIR_BIN}/libavcodec.so.61.3.100
     ${LIBDIR_BIN}/libavutil.so.59

deps/CMakeLists.txt

@@ -156,7 +156,7 @@ if (NOT _is_multi AND NOT CMAKE_BUILD_TYPE)
 endif ()
 
 function(orcaslicer_add_cmake_project projectname)
-    cmake_parse_arguments(P_ARGS "FORWARD_CONFIG" "INSTALL_DIR;BUILD_COMMAND;INSTALL_COMMAND;SOURCE_DIR" "CMAKE_ARGS" ${ARGN})
+    cmake_parse_arguments(P_ARGS "FORWARD_CONFIG" "INSTALL_DIR;BUILD_COMMAND;INSTALL_COMMAND" "CMAKE_ARGS" ${ARGN})
 
     # MSVC is true for clang-cl as well, so the sub-build toolchain has to key on the
     # generator. A non-Visual-Studio superbuild passes its own generator down, and with
@@ -202,18 +202,12 @@ function(orcaslicer_add_cmake_project projectname)
       set(_build_j "-j${NPROC}")
     endif ()
 
-    set(_source_dir_arg "")
-    if (P_ARGS_SOURCE_DIR)
-        set(_source_dir_arg SOURCE_DIR ${P_ARGS_SOURCE_DIR})
-    endif ()
-
 if (NOT IS_CROSS_COMPILE OR NOT APPLE)
     ExternalProject_Add(
         dep_${projectname}
         EXCLUDE_FROM_ALL    ON
         INSTALL_DIR         ${DESTDIR}
         DOWNLOAD_DIR        ${DEP_DOWNLOAD_DIR}/${projectname}
-        ${_source_dir_arg}
         ${_gen}
         CMAKE_ARGS
             -DCMAKE_POLICY_VERSION_MINIMUM=3.5
@@ -246,14 +240,12 @@ if (NOT IS_CROSS_COMPILE OR NOT APPLE)
         # note for future devs: shared libs may actually create a size reduction
         # but orcaslicer_deps tends to get really funny regarding linking after that (notably boost)
         # so, as much as I would like to use that, it's not happening
-        if (NOT P_ARGS_SOURCE_DIR)
+        ExternalProject_Add_Step(dep_${projectname} free_download_space
-            ExternalProject_Add_Step(dep_${projectname} free_download_space
+                DEPENDEES download # do after download
-                    DEPENDEES download # do after download
+                COMMENT "Freeing Space: Removing source archive"
-                    COMMENT "Freeing Space: Removing source archive"
+                WORKING_DIRECTORY ${DEP_DOWNLOAD_DIR}
-                    WORKING_DIRECTORY ${DEP_DOWNLOAD_DIR}
+                COMMAND ${CMAKE_COMMAND} -E rm -r ${projectname}
-                    COMMAND ${CMAKE_COMMAND} -E rm -rf ${projectname}
+        )
-            )
-        endif ()
         ExternalProject_Add_Step(dep_${projectname} free_build_space
                 DEPENDEES install # do after install
                 COMMENT "Freeing Space: Removing source and build files"
@@ -267,7 +259,6 @@ else()
         EXCLUDE_FROM_ALL    ON
         INSTALL_DIR         ${DESTDIR}
         DOWNLOAD_DIR        ${DEP_DOWNLOAD_DIR}/${projectname}
-        ${_source_dir_arg}
         ${_gen}
         CMAKE_ARGS
             -DCMAKE_POLICY_VERSION_MINIMUM=3.5
@@ -395,6 +386,10 @@ include(libnoise/libnoise.cmake)
 
 include(Draco/Draco.cmake)
 
+include(FFMPEG/FFMPEG.cmake)
+include(Assimp/Assimp.cmake)
+
+
 # I *think* 1.1 is used for *just* md5 hashing?
 # 3.1 has everything in the right place, but the md5 funcs used are deprecated
 # a grep across the repo shows it is used for other things
@@ -405,12 +400,6 @@ if(NOT OPENSSL_FOUND)
     set(OPENSSL_PKG dep_OpenSSL)
 endif()
 
-include(FFMPEG/FFMPEG.cmake)
-include(Assimp/Assimp.cmake)
-
-include(DataChannel/DataChannel.cmake)
-set(DATACHANNEL_PKG dep_DataChannel)
-
 # we don't want to load a "wrong" openssl when loading curl
 # so, just don't even bother
 # ...i think this is how it works? change if wrong
@@ -484,7 +473,6 @@ set(_dep_list
     dep_wxInspector
     dep_FFMPEG
     dep_Assimp
-    ${DATACHANNEL_PKG}
     )
 
 if (MSVC)

deps/DataChannel/DataChannel.cmake

@@ -1,37 +0,0 @@
-# libdatachannel is the native ICE/DTLS/SCTP implementation used by the
-# GUI WebRTC camera controller. Keep the source revision fixed: the signaling
-# protocol is evolving independently of this transport dependency.
-#
-# It vendors plog, usrsctp and libjuice as git submodules, which a plain
-# GitHub tag tarball does not include. The flatpak sandbox has no network
-# access during the build, so there the manifest itself clones the repo
-# (submodules and all) into the dependency download directory before the
-# sandbox closes. ExternalProject_Add is pointed at that existing checkout
-# instead of being given its own network-dependent download method.
-if (FLATPAK)
-    set(_datachannel_source
-        SOURCE_DIR ${DEP_DOWNLOAD_DIR}/DataChannel
-    )
-else()
-    set(_datachannel_source
-        GIT_REPOSITORY https://github.com/paullouisageneau/libdatachannel.git
-        GIT_TAG v0.24.5
-        GIT_SHALLOW ON
-        GIT_SUBMODULES_RECURSE ON
-    )
-endif()
-
-orcaslicer_add_cmake_project(DataChannel
-    DEPENDS ${OPENSSL_PKG}
-    CMAKE_ARGS
-        -DNO_EXAMPLES=ON
-        -DNO_TESTS=ON
-        -DNO_WEBSOCKET=ON
-        -DNO_MEDIA=ON
-        -DUSE_NICE=OFF
-        -DUSE_SYSTEM_JUICE=OFF
-        -DUSE_SYSTEM_USRSCTP=OFF
-        -DOPENSSL_ROOT_DIR:PATH=${DESTDIR}
-        -DOPENSSL_USE_STATIC_LIBS=ON
-    ${_datachannel_source}
-)

deps/FFMPEG/FFMPEG.cmake

@@ -1,26 +1,14 @@
 set(_conf_cmd ./configure)
 
-set(_ffmpeg_depends)
-set(_ffmpeg_configure_command ${_conf_cmd})
-if (TARGET dep_OpenSSL)
-    set(_ffmpeg_depends DEPENDS dep_OpenSSL)
-    set(_ffmpeg_configure_command
-        ${CMAKE_COMMAND} -E env
-        "PKG_CONFIG_PATH=${DESTDIR}/lib/pkgconfig:$ENV{PKG_CONFIG_PATH}"
-        ${_conf_cmd}
-    )
-endif()
-
 if (MSVC)
     set(_source_dir "${CMAKE_BINARY_DIR}/dep_FFMPEG-prefix/src/dep_FFMPEG")
 
-    set(PREBUILD_URL_arm64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-09-18-16-50/ffmpeg-n7.0.3-33-g887d4b4919-winarm64-orca-shared-7.0.zip")
+    set(PREBUILD_URL_arm64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-07-17-14-28/ffmpeg-n7.0.3-31-g9b6ffd74b5-winarm64-orca-shared-7.0.zip")
-    set(PREBUILD_HASH_arm64 "da480cbb39680056de824c57ec4dc3bd577b479ebbc310ff1f9dc55cf014b4c1")
+    set(PREBUILD_HASH_arm64 "12f4140279f2f8469885e1b5b2e8be9d788882914c21523cacd56989f3548054")
-    set(PREBUILD_URL_x64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-09-18-16-50/ffmpeg-n7.0.3-33-g887d4b4919-win64-orca-shared-7.0.zip")
+    set(PREBUILD_URL_x64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-07-17-14-28/ffmpeg-n7.0.3-31-g9b6ffd74b5-win64-orca-shared-7.0.zip")
-    set(PREBUILD_HASH_x64 "85da19daf198f5548259d8aabb349db84997a3f6e6886d8d7764114add9c6dae")
+    set(PREBUILD_HASH_x64 "e65916020ddb9ef84b2666dfbcbfc9b1d67f69d15b4a66db53754637bf2d498c")
 
     ExternalProject_Add(dep_FFMPEG
-        ${_ffmpeg_depends}
         URL ${PREBUILD_URL_${DEPS_ARCH}}
         URL_HASH SHA256=${PREBUILD_HASH_${DEPS_ARCH}}
         DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/FFMPEG
@@ -33,8 +21,6 @@ if (MSVC)
     )
 
 else ()
-    set(_openssl_cmd --enable-openssl)
-
     if (APPLE)
         set(_minos_cmd
             "--extra-cflags=-mmacosx-version-min=${DEP_OSX_TARGET}"
@@ -66,11 +52,10 @@ else ()
     endif()
 
     ExternalProject_Add(dep_FFMPEG
-        ${_ffmpeg_depends}
         URL https://github.com/FFmpeg/FFmpeg/archive/refs/tags/n7.0.3.tar.gz
         URL_HASH SHA256=DEEDCABE339165214A3637DF4C86A507AEF0D793CF8774FF68735F4737E8DDBC
         DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/FFMPEG
-        CONFIGURE_COMMAND ${_ffmpeg_configure_command}
+        CONFIGURE_COMMAND ${_conf_cmd}
             ${_cross_cmd}
             ${_pic_cmd}
             ${_arch_cmd}
@@ -78,21 +63,20 @@ else ()
             "--prefix=${DESTDIR}"
             ${_link_cmd}
             ${_minos_cmd}
-            ${_openssl_cmd}
             --disable-doc
             --enable-small
             --disable-outdevs
             --disable-filters
             --enable-filter=*null*,afade,*fifo,*format,*resample,aeval,allrgb,allyuv,atempo,pan,*bars,color,*key,crop,draw*,eq*,framerate,*_qsv,*_vaapi,*v4l2*,hw*,scale,volume,test*
             --disable-protocols
-            --enable-protocol=file,fd,pipe,http,https,rtp,tcp,udp
+            --enable-protocol=file,fd,pipe,rtp,udp
             --disable-muxers
             --enable-muxer=rtp
             --disable-encoders
             --disable-decoders
             --enable-decoder=*aac*,h264*,mp3*,mjpeg,rv*
             --disable-demuxers
-            --enable-demuxer=h264,mp3,mov,mpjpeg,rtsp,sdp
+            --enable-demuxer=h264,mp3,mov
             --disable-zlib
             --disable-avdevice
         BUILD_IN_SOURCE ON

docs/HLSD/printer-agent.md

@@ -1,240 +0,0 @@
-# Printer agents
-
-Printer agents isolate printer-specific communication from the rest of OrcaSlicer. The GUI and
-`DeviceManager` operate on a shared set of printer operations and device state; a selected printer
-agent implements those operations for a particular printer ecosystem. The agent boundary allows
-Bambu, Moonraker-based printers, built-in integrations, and Python-provided integrations to use the
-same application workflow without making the GUI understand every printer protocol.
-
-The current boundary is an adapter boundary around the existing application contract. In particular,
-some request fields and message payloads still use the Bambu-shaped representation that existing
-`MachineObject` and `DeviceManager` code consumes. The printer agent is responsible for translating
-that representation into the protocol spoken by its printer. This is an intentional compatibility
-constraint of the current design; the interface is not yet a neutral printer protocol.
-
-The v1 dialect migration path is deliberately narrow. `DeviceManager` currently speaks the Bambu JSON
-dialect because that is the payload shape already used throughout the command and state workflow. The
-v1 `OrcaPrinterAgent` also accepts that Bambu dialect. Its transport path places the small translation
-needed for the target printer at `deliver_to_sink`, keeping the compatibility code at the edge rather
-than spreading it through `DeviceManager` or the agent interface.
-
-The eventual direction is for `DeviceManager` to produce an Orca JSON dialect. The Bambu agent will then
-own the translation from Orca JSON to Bambu's protocol, while `OrcaPrinterAgent` can forward the Orca
-payload directly to its sink. The v1 translation at `deliver_to_sink` can then be removed without
-changing `DeviceManager`, the command callers, or the rest of the agent workflow.
-
-## Components
-
-The system has four relevant layers:
-
-```text
-GUI / DeviceManager / MachineObject
-              |
-        NetworkAgent
-          /       \
- IPrinterAgent   ICloudServiceAgent
-      |                 |
- printer protocol   authentication and cloud services
-```
-
-### `DeviceManager` and `MachineObject`
-
-`DeviceManager` owns the application-facing printer workflow. It maintains `MachineObject` instances,
-updates their state, filters devices for the active printer agent, and initiates operations such as
-homing, temperature changes, printing, subscriptions, and camera playback.
-
-`MachineObject` remains the shared state model used by the GUI. It does not contain the implementation
-of a printer protocol. When a device is discovered or returned by a cloud query, the device is tagged
-with the active `printer_agent_id`. Device lists and selected-machine operations use that tag to avoid
-sending an operation through an agent that does not own the device.
-
-### `NetworkAgent`
-
-`NetworkAgent` is the façade used by the GUI and `DeviceManager`. It owns:
-
-- the currently selected `IPrinterAgent`;
-- the registered cloud-service instances, indexed by provider;
-- callbacks shared by the active printer agent and the application;
-- the forwarding methods for printer commands and cloud operations.
-
-There is one active printer agent for the currently selected printer preset. Switching the preset
-increments the machine-list generation, disconnects the old printer agent, removes its callbacks, and
-installs the newly selected agent. The façade then forwards printer operations to that agent.
-
-Cloud operations are selected separately using a provider key. `NetworkAgent` forwards a cloud request
-to the matching `ICloudServiceAgent`, and forwards cloud camera operations with a device ID. The
-printer agent receives a cloud-agent pointer through `set_cloud_agent()` when it is created, allowing
-printer communication to obtain cloud tokens without depending on a concrete cloud implementation.
-
-### `IPrinterAgent`
-
-`IPrinterAgent` is the printer-facing contract. It covers:
-
-- cloud-relay and direct-LAN message delivery;
-- LAN connection, discovery, binding, and certificates;
-- printer subscriptions and callbacks;
-- print operations;
-- filament synchronization;
-- camera capability and local camera URL reporting;
-- printer command methods.
-
-Concrete built-in implementations include the Bambu wrapper, the native Orca/Moonraker path, and
-other printer-agent implementations registered by the application. A printer agent may use either
-the cloud agent, a direct LAN connection, or both.
-
-### `ICloudServiceAgent`
-
-`ICloudServiceAgent` owns authentication and services provided by a cloud backend. It covers login
-state, tokens, user and printer lists, settings synchronization, model services, cloud messages, and
-cloud camera operations.
-
-Cloud camera operations are device-scoped:
-
-- `get_camera_url(dev_id, callback)` obtains a stream URL for one device;
-- `create_camera_signaling_channel(dev_id)` creates signaling for one device where the provider
-  supports it.
-
-This is separate from the local camera URL exposed by `IPrinterAgent`, which is currently scoped to
-the active printer agent because a normal LAN agent represents one physical printer connection.
-
-## Agent registration and selection
-
-`NetworkAgentFactory` maintains the printer-agent registry. Each registry entry contains an agent ID,
-a display name, and a factory function. Built-in agents register during application initialization.
-Python printer-agent capabilities register dynamically and contribute an agent ID and factory entry.
-
-The selected printer preset contains the printer-agent choice. If no explicit choice is stored, the
-application preserves the existing default behavior: Bambu presets select the Bambu agent and other
-presets select the native Orca agent. When a preset is changed, `GUI_App` resolves the effective agent
-ID, obtains the corresponding cloud agent, creates the printer agent through the registry, and installs
-it in `NetworkAgent`.
-
-The registry rejects conflicting agent IDs. This matters for Python plugins because an agent ID is the
-stable identity used by presets and device ownership; two enabled plugin capabilities must not claim
-the same ID.
-
-## Message and command flow
-
-There are two low-level message paths:
-
-- `send_message()` publishes a command through the printer's cloud relay;
-- `send_message_to_printer()` sends a command directly to the printer over the LAN path.
-
-Both paths accept a JSON string, quality-of-service and flag values, and return the existing network
-status code domain. The agent owns the conversion from that JSON contract to its native transport.
-
-The typed `command_*` methods are the application-facing convenience layer. The five generic defaults
-currently implemented by `IPrinterAgent` construct the existing JSON dialect and route through the
-same message path:
-
-| Method | Default operation |
-| --- | --- |
-| `command_xyz_abs()` | Send `G90` for absolute positioning |
-| `command_auto_leveling()` | Send `G29` for bed leveling |
-| `command_go_home()` | Use the supported homing operation or send `G28` |
-| `command_set_bed()` | Use the supported bed control or send `M140` |
-| `command_set_nozzle()` | Send `M104` for nozzle temperature |
-
-These are compatibility defaults for common printer workflows, not a guarantee that every firmware
-implements every command identically. An agent can override a method when its protocol needs another
-operation. For example, a Klipper configuration may use `BED_MESH_CALIBRATE` instead of `G29`.
-
-The remaining common command methods default to `ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED` because their
-existing behavior is vendor-specific or has no portable implementation:
-
-- AMS RFID refresh;
-- AMS calibration;
-- AMS tray selection;
-- camera start;
-- axis control.
-
-The methods remain on the common interface so an agent that supports them can override them explicitly.
-`sequence_id` remains part of the command contract because `DeviceManager` creates and tracks it as
-the command ID.
-
-## Device ownership and stale responses
-
-Printer-agent ownership is represented by `printer_agent_id` on device records and `MachineObject`
-instances. The active agent ID is attached when a device is discovered, returned by a cloud list, or
-reused after a preset switch. Local-machine configuration also persists the agent ID so a saved LAN
-device is not silently reused by an unrelated agent.
-
-Cloud printer-list responses carry three pieces of request context added by `NetworkAgent`:
-
-```text
-provider   cloud provider used for the request
-agent_id   active printer agent when the request was made
-generation machine-list generation when the request was made
-```
-
-`DeviceManager` accepts the response only when those values still match the current provider, active
-agent, and generation. This prevents a slow response from the previous preset or provider from
-repopulating the current device list.
-
-The provider mapping is currently selected by `GUI_App`: the Bambu agent maps to the Bambu cloud
-provider and other agents map to the Orca cloud provider. The generation check protects that existing
-selection from races; it does not make cloud-provider ownership intrinsic to an agent. Cloud-printer
-ownership and the broader Orca cloud services are therefore still separate architectural concerns.
-
-## Python printer agents
-
-`PrinterAgentPluginCapability` implements `IPrinterAgent` directly. The live capability object is
-registered with `NetworkAgentFactory` and handed out as the printer agent when its agent ID is selected.
-The plugin receives the selected `ICloudServiceAgent` through `set_cloud_agent()` just like a built-in
-printer agent.
-
-Python plugins must implement the core communication and lifecycle methods required by the interface,
-including agent metadata, printer connection, discovery callbacks, and the two message-send methods.
-Methods that are meaningful only to a particular printer are optional overrides where the C++ base
-class provides a default.
-
-All ten `command_*` methods are available in the Python binding and in the trampoline. Their override
-status is intentionally optional:
-
-- the five generic commands use the C++ default when Python does not override them;
-- the five vendor-specific commands return `NOT_SUPPORTED` unless Python supplies an implementation;
-- a Python implementation can replace either behavior for its own protocol.
-
-The Python camera binding exposes HTTP, HTTPS, RTSP, and HTTP-snapshot modes. WebRTC remains a
-built-in C++ camera mode, but is not exposed as a Python mode because the current Python capability
-does not provide the corresponding cloud signaling-channel contract.
-
-## Camera playback boundary
-
-The camera stream mode describes how a stream is obtained; it does not by itself define ownership of
-the wxWidgets view that renders it. `MediaPlayCtrl` selects and tears down the active backend, while
-the wx parent owns the child window or renderer. This is important because a web view, native media
-control, and frame-based/WebRTC renderer have different wx window-lifetime requirements.
-
-Cloud URL and signaling requests are routed through `NetworkAgent` to the cloud provider selected for
-the device. Local URL requests are routed to the active printer agent. The distinction keeps cloud
-account services device-scoped while preserving the current one-LAN-agent/one-printer model.
-
-## Compatibility constraints
-
-The printer-agent boundary intentionally preserves several existing application contracts:
-
-- Bambu-shaped JSON is still the shared command representation;
-- existing network status codes are reused, with Orca-specific unsupported/capability errors added
-  in the Orca-reserved range;
-- `MachineObject` remains the shared device-state model;
-- preset and local-machine data retain compatibility with the existing agent-selection behavior;
-- Python plugins use the existing capability and pybind11 registration system.
-
-The agent abstraction is therefore responsible for containing vendor differences, not for pretending
-that all vendor protocols are identical. The planned Orca JSON dialect is the protocol-neutral command
-model for the `DeviceManager`/agent boundary. Once it is introduced, Bambu-specific translation remains
-inside the Bambu agent and the Orca agent's v1 sink adapter can be removed as a self-contained cleanup.
-
-## Main implementation locations
-
-- [`IPrinterAgent`](../../src/slic3r/Utils/IPrinterAgent.hpp) — printer-agent contract and generic command defaults
-- [`ICloudServiceAgent`](../../src/slic3r/Utils/ICloudServiceAgent.hpp) — cloud service and per-device
-  cloud camera contract
-- [`NetworkAgent`](../../src/slic3r/Utils/NetworkAgent.hpp) — façade and dispatch between active agents
-- [`NetworkAgentFactory`](../../src/slic3r/Utils/NetworkAgentFactory.hpp) — built-in and Python agent registry
-- [`DeviceManager`](../../src/slic3r/GUI/DeviceCore/DevManager.cpp) — device ownership, filtering, and
-  stale-response checks
-- [`PrinterAgentPluginCapability`](../../src/slic3r/plugin/pluginTypes/printerAgent/PrinterAgentPluginCapability.cpp)
-  — Python bindings
-- [`MediaPlayCtrl`](../../src/slic3r/GUI/MediaPlayCtrl.cpp) — camera backend selection and playback lifecycle

resources/profiles/Anker/machine/fdm_marlin_common.json

@@ -6,6 +6,7 @@
 	"instantiation": "false",
 	"gcode_flavor": "marlin2",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
+	"file_start_gcode": ";TIME:{print_time_sec}s",
 	"machine_start_gcode": "M4899 T3 ; Enable v3 jerk and S-curve acceleration \nM104 S150 ; Set hotend temp to 150 degrees to prevent ooze\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; set final nozzle temp to stabilize\nG28 ;Home\n;LAYER_COUNT:{total_layer_count}",
 	"machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM18",
 	"change_filament_gcode": "M600",

resources/profiles/Anycubic.json

@@ -1,6 +1,6 @@
 {
 	"name": "Anycubic",
-	"version": "02.04.00.05",
+	"version": "02.04.00.07",
 	"force_update": "0",
 	"description": "Anycubic configurations",
 	"machine_model_list": [
@@ -48,6 +48,10 @@
 			"name": "Anycubic Kobra 3 Max",
 			"sub_path": "machine/Anycubic Kobra 3 Max.json"
 		},
+		{
+			"name": "Anycubic Kobra 3 V2",
+			"sub_path": "machine/Anycubic Kobra 3 V2.json"
+		},
 		{
 			"name": "Anycubic Kobra Max",
 			"sub_path": "machine/Anycubic Kobra Max.json"
@@ -102,6 +106,10 @@
 			"name": "0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
 			"sub_path": "process/0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
@@ -118,6 +126,10 @@
 			"name": "0.10mm Detail @Anycubic Kobra 3 0.2 nozzle",
 			"sub_path": "process/0.10mm Detail @Anycubic Kobra 3 0.2 nozzle.json"
 		},
+		{
+			"name": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
+			"sub_path": "process/0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle.json"
+		},
 		{
 			"name": "0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
 			"sub_path": "process/0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
@@ -142,6 +154,10 @@
 			"name": "0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
 			"sub_path": "process/0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
@@ -214,6 +230,10 @@
 			"name": "0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle",
 			"sub_path": "process/0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
@@ -286,6 +306,10 @@
 			"name": "0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "process/0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle",
 			"sub_path": "process/0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
@@ -342,6 +366,10 @@
 			"name": "0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
 			"sub_path": "process/0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json"
@@ -370,6 +398,10 @@
 			"name": "0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle",
 			"sub_path": "process/0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
@@ -426,6 +458,10 @@
 			"name": "0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
 			"sub_path": "process/0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json"
 		},
+		{
+			"name": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "process/0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
 		{
 			"name": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
 			"sub_path": "process/0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json"
@@ -454,6 +490,10 @@
 			"name": "0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "process/0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "process/0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
 		{
 			"name": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
 			"sub_path": "process/0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
@@ -477,6 +517,34 @@
 		{
 			"name": "0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
 			"sub_path": "process/0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "process/0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "process/0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
+		{
+			"name": "0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "process/0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json"
 		}
 	],
 	"filament_list": [
@@ -528,6 +596,10 @@
 			"name": "Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic ABS @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic ABS @Anycubic Kobra S1 0.4 nozzle.json"
@@ -564,6 +636,10 @@
 			"name": "Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic ASA @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic ASA @Anycubic Kobra S1 0.4 nozzle.json"
@@ -704,6 +780,10 @@
 			"name": "Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PETG @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PETG @Anycubic Kobra S1 0.4 nozzle.json"
@@ -768,6 +848,22 @@
 			"name": "Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra S1 0.4 nozzle.json"
@@ -792,6 +888,22 @@
 			"name": "Anycubic PLA @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra X 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle.json"
@@ -800,6 +912,10 @@
 			"name": "Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle.json"
@@ -824,10 +940,26 @@
 			"name": "Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Matte @Anycubic Kobra S1 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra S1 Max 0.4 nozzle.json"
@@ -844,10 +976,30 @@
 			"name": "Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle.json"
@@ -868,6 +1020,10 @@
 			"name": "Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Translucent @Anycubic Kobra S1 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Translucent @Anycubic Kobra S1 Max 0.4 nozzle.json"
@@ -980,6 +1136,10 @@
 			"name": "Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic TPU @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic TPU @Anycubic Kobra S1 0.4 nozzle.json"
@@ -1016,6 +1176,22 @@
 			"name": "Anycubic PETG @Anycubic Kobra 3 0.4 nozzle",
 			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle.json"
@@ -1174,6 +1350,22 @@
 			"name": "Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "machine/Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic Kobra 3 V2 0.2 nozzle",
+			"sub_path": "machine/Anycubic Kobra 3 V2 0.2 nozzle.json"
+		},
+		{
+			"name": "Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "machine/Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "machine/Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "machine/Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic Kobra Max 0.4 nozzle",
 			"sub_path": "machine/Anycubic Kobra Max 0.4 nozzle.json"

resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "LXkKhWH9YcYPr3IT",
+	"filament_id": "OF223rZv",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"ABS"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"5"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"5"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"15"
+	],
+	"fan_min_speed": [
+		"1"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"0"
+	],
+	"filament_density": [
+		"1.05"
+	],
+	"filament_deretraction_speed": [
+		"80"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"70%"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"2"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"80"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"100"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"15"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"16"
+	],
+	"slow_down_min_speed": [
+		"25"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "cWBQa7XzDl3czIOs",
+	"filament_id": "OF0yFLkY",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"ASA"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"270"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"5"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"15"
+	],
+	"fan_min_speed": [
+		"1"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.04"
+	],
+	"filament_deretraction_speed": [
+		"80"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"70%"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"2"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"80"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"100"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"15"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"16"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "suyxKj9qKLtpBhhU",
+	"filament_id": "OFo6n2pB",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"5"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"15"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"0"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"80"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"2"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"80"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"6"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"25"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,69 @@
+{
+	"type": "filament",
+	"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
+	"from": "system",
+	"setting_id": "0uOqeEk5YgyZH4Yy",
+	"filament_id": "OFo6n2pB",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"75"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"70"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,42 @@
+{
+	"type": "filament",
+	"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
+	"from": "system",
+	"setting_id": "OOOjWFMFhP1fMhFf",
+	"filament_id": "OFo6n2pB",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "uJRZr6orTVm79FeE",
+	"filament_id": "OFmjN2bc",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"1.6"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.2 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "udLvkeYZ9Av7GkDz",
+	"filament_id": "OFmjN2bc",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "W69H1Vca3f74FfYj",
+	"filament_id": "OFmjN2bc",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "TR27JCwXxHeVhVHN",
+	"filament_id": "OFmjN2bc",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"60"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "i0FTxiH68CKHiLLT",
+	"filament_id": "OF80Qbpq",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,258 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "XHa1HSjh0RjAo0nz",
+	"filament_id": "OF80Qbpq",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_layer_time_BRASS": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,261 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "iRVPFxNMEfkCDnMh",
+	"filament_id": "OF80Qbpq",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_max_speed_BRASS": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"fan_min_speed_BRASS": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "itTckVFabfsVbNBK",
+	"filament_id": "OF5PtjTp",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"40"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"0%"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"60"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Auto Lift"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"9"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "YLxoiuRDXBWLQYw4",
+	"filament_id": "OFjVOWfJ",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.035"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"7"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "JwcCfY4XVCRJaDeS",
+	"filament_id": "OFCSyK66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "Sjw7irNgwCZMfWS3",
+	"filament_id": "OFCSyK66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"50"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "HeQwxU4T2W1V0LM3",
+	"filament_id": "OFCSyK66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.035"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "H3PIqeTzjvtFQXYv",
+	"filament_id": "OFIE3vOf",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"9"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "4zmGMIi6jHJhU4c6",
+	"filament_id": "OF5F0S66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "wLkJ1CJgdWnT4NoJ",
+	"filament_id": "OF5F0S66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"50"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "kkcDxmDe6F9fwhoJ",
+	"filament_id": "OF5F0S66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.035"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "QRl3zpmacQ8D8aNX",
+	"filament_id": "OFCp3Bgo",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "qF5SGZKoINokZfx2",
+	"filament_id": "OFFwJWea",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,51 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
+	"from": "system",
+	"setting_id": "6aUrszW2Dj8CNYIp",
+	"filament_id": "OFFwJWea",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_speed": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"pressure_advance": [
+		"0.025"
+	],
+	"slow_down_layer_time": [
+		"10"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,51 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
+	"from": "system",
+	"setting_id": "f8K19ebfxiXji84y",
+	"filament_id": "OFFwJWea",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_speed": [
+		"80"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"pressure_advance": [
+		"0.025"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,273 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "NTs7c6NqAudTl9wk",
+	"filament_id": "OF7c9fln",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"1"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"100"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_max_speed_BRASS": [
+		"100"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"fan_min_speed_BRASS": [
+		"70"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_BRASS": [
+		"205"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_layer_time_BRASS": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "oSWtTJpng3ERixPJ",
+	"filament_id": "OFMsDGbs",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"TPU"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"3.2"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"0"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"25"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"0%"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"2"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"35"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.2 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "machine",
+	"name": "Anycubic Kobra 3 V2 0.2 nozzle",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "gaQ37xRo6J467j1y",
+	"instantiation": "true",
+	"printer_technology": "FFF",
+	"printer_settings_id": "Anycubic Kobra 3 V2 0.2 nozzle",
+	"printer_model": "Anycubic Kobra 3 V2",
+	"printer_variant": "0.2",
+	"nozzle_diameter": [
+		"0.2"
+	],
+	"default_print_profile": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
+	"default_filament_profile": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle"
+	],
+	"disable_m73": "0",
+	"gcode_flavor": "klipper",
+	"printable_area": [
+		"0x0",
+		"255x0",
+		"255x255",
+		"0x255"
+	],
+	"printable_height": "260",
+	"thumbnails": [
+		"230x110"
+	],
+	"thumbnails_format": "PNG",
+	"thumbnails_internal": [
+		"512x512/PNG/top"
+	],
+	"thumbnails_internal_switch": "1",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [],
+	"bed_mesh_max": "0,0",
+	"bed_mesh_min": "0,0",
+	"bed_mesh_probe_distance": "0,0",
+	"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)}  F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"deretraction_speed": [
+		"40"
+	],
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "250",
+	"extruder_clearance_height_to_rod": "20",
+	"extruder_clearance_radius": "65",
+	"extruder_colour": [
+		"FF4D4F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "G92 E0\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n",
+	"machine_load_filament_time": "42",
+	"machine_max_acceleration_e": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_extruding": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_travel": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_x": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_z": [
+		"1000",
+		"1000",
+		"1000"
+	],
+	"machine_max_jerk_e": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_x": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_y": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_z": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_speed_e": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_z": [
+		"15",
+		"10",
+		"26"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M600",
+	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.14"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "107",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printer_flush_multiplier": "1",
+	"printer_notes": "",
+	"printer_structure": "i3",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retract_length_toolchange": [
+		"0"
+	],
+	"retract_lift_above": [
+		"0.3"
+	],
+	"retract_lift_below": [
+		"258"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_on_top_layer": [
+		"1"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"0"
+	],
+	"retraction_length": [
+		"0.8"
+	],
+	"retraction_minimum_travel": [
+		"0"
+	],
+	"retraction_speed": [
+		"40"
+	],
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0"
+}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,251 @@
+{
+	"type": "machine",
+	"name": "Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "l49qdfdrHYEO04bV",
+	"instantiation": "true",
+	"printer_technology": "FFF",
+	"printer_settings_id": "Anycubic Kobra 3 V2 0.4 nozzle",
+	"printer_model": "Anycubic Kobra 3 V2",
+	"printer_variant": "0.4",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"default_print_profile": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"default_filament_profile": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"disable_m73": "0",
+	"gcode_flavor": "klipper",
+	"printable_area": [
+		"0x0",
+		"255x0",
+		"255x255",
+		"0x255"
+	],
+	"printable_height": "260",
+	"thumbnails": "230x110/PNG",
+	"thumbnails_format": "PNG",
+	"thumbnails_internal": "512x512/PNG/top",
+	"thumbnails_internal_switch": "1",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [],
+	"bed_mesh_max": "0,0",
+	"bed_mesh_min": "0,0",
+	"bed_mesh_probe_distance": "0,0",
+	"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)}  F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"deretraction_speed": [
+		"60"
+	],
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "250",
+	"extruder_clearance_height_to_rod": "20",
+	"extruder_clearance_radius": "65",
+	"extruder_colour": [
+		"FF4D4F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "M400\nG92 E0 ; zero the extruder\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors",
+	"machine_load_filament_time": "42",
+	"machine_max_acceleration_e": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_extruding": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_travel": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_x": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_z": [
+		"1000",
+		"1000",
+		"1000"
+	],
+	"machine_max_jerk_e": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_x": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_y": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_z": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_speed_e": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_z": [
+		"15",
+		"10",
+		"26"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M600",
+	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.28"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "107",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printer_flush_multiplier": "1",
+	"printer_notes": "",
+	"printer_structure": "i3",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retract_length_toolchange": [
+		"0"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"259"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_on_top_layer": [
+		"1"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"0"
+	],
+	"retraction_length": [
+		"1"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"2"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Slope Lift"
+	],
+	"z_offset": "0"
+}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,251 @@
+{
+	"type": "machine",
+	"name": "Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "hQQgQT5HeCVGpBAL",
+	"instantiation": "true",
+	"printer_technology": "FFF",
+	"printer_settings_id": "Anycubic Kobra 3 V2 0.6 nozzle",
+	"printer_model": "Anycubic Kobra 3 V2",
+	"printer_variant": "0.6",
+	"nozzle_diameter": [
+		"0.6"
+	],
+	"default_print_profile": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"default_filament_profile": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"disable_m73": "0",
+	"gcode_flavor": "klipper",
+	"printable_area": [
+		"0x0",
+		"255x0",
+		"255x255",
+		"0x255"
+	],
+	"printable_height": "260",
+	"thumbnails": "230x110/PNG",
+	"thumbnails_format": "PNG",
+	"thumbnails_internal": "512x512/PNG/top",
+	"thumbnails_internal_switch": "1",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [],
+	"bed_mesh_max": "0,0",
+	"bed_mesh_min": "0,0",
+	"bed_mesh_probe_distance": "0,0",
+	"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)}  F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"deretraction_speed": [
+		"30"
+	],
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "250",
+	"extruder_clearance_height_to_rod": "20",
+	"extruder_clearance_radius": "65",
+	"extruder_colour": [
+		"FF4D4F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-1 F3600 ; retract\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F600 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n",
+	"machine_load_filament_time": "42",
+	"machine_max_acceleration_e": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_extruding": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_travel": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_x": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_z": [
+		"1000",
+		"1000",
+		"1000"
+	],
+	"machine_max_jerk_e": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_x": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_y": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_z": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_speed_e": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_z": [
+		"15",
+		"10",
+		"26"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M600",
+	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.05\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.42"
+	],
+	"min_layer_height": [
+		"0.12"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "107",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printer_flush_multiplier": "1",
+	"printer_notes": "",
+	"printer_structure": "i3",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retract_length_toolchange": [
+		"0"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"259"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_on_top_layer": [
+		"1"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"0"
+	],
+	"retraction_length": [
+		"0.8"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"30"
+	],
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"2"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0"
+}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "machine",
+	"name": "Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "LBhbohm7o4jW6OYw",
+	"instantiation": "true",
+	"printer_technology": "FFF",
+	"printer_settings_id": "Anycubic Kobra 3 V2 0.8 nozzle",
+	"printer_model": "Anycubic Kobra 3 V2",
+	"printer_variant": "0.8",
+	"nozzle_diameter": [
+		"0.8"
+	],
+	"default_print_profile": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"default_filament_profile": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"disable_m73": "0",
+	"gcode_flavor": "klipper",
+	"printable_area": [
+		"0x0",
+		"255x0",
+		"255x255",
+		"0x255"
+	],
+	"printable_height": "260",
+	"thumbnails": [
+		"230x110"
+	],
+	"thumbnails_format": "PNG",
+	"thumbnails_internal": [
+		"512x512/PNG/top"
+	],
+	"thumbnails_internal_switch": "1",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [],
+	"bed_mesh_max": "0,0",
+	"bed_mesh_min": "0,0",
+	"bed_mesh_probe_distance": "0,0",
+	"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)}  F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"deretraction_speed": [
+		"0"
+	],
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "250",
+	"extruder_clearance_height_to_rod": "20",
+	"extruder_clearance_radius": "65",
+	"extruder_colour": [
+		"FF4D4F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-2 F3000 ; retract\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F600 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n",
+	"machine_load_filament_time": "42",
+	"machine_max_acceleration_e": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_extruding": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_travel": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_x": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_z": [
+		"1000",
+		"1000",
+		"1000"
+	],
+	"machine_max_jerk_e": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_x": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_y": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_z": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_speed_e": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_z": [
+		"15",
+		"10",
+		"26"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M600",
+	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.56"
+	],
+	"min_layer_height": [
+		"0.16"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "107",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printer_flush_multiplier": "1",
+	"printer_notes": "",
+	"printer_structure": "i3",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retract_length_toolchange": [
+		"0"
+	],
+	"retract_lift_above": [
+		"0.3"
+	],
+	"retract_lift_below": [
+		"259.6"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_on_top_layer": [
+		"1"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"0"
+	],
+	"retraction_length": [
+		"1"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"40"
+	],
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"2"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0"
+}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2.json

@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "machine_tech": "FFF",
+    "family": "Anycubic",
+    "name": "Anycubic Kobra 3 V2",
+    "model_id": "Anycubic Kobra 3 V2",
+    "nozzle_diameter": "0.4;0.2;0.6;0.8",
+    "bed_model": "Anycubic Kobra 3 V2_buildplate_model.stl",
+    "bed_texture": "Anycubic Kobra 3 V2_buildplate_texture.svg",
+    "hotend_model": "",
+    "default_materials": "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle;Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle"
+}

resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "9yiDozcVDSxKkz4V",
+	"instantiation": "true",
+	"print_settings_id": "0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.08",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "7",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "5000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "250",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "350",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "200",
+	"ironing_angle": "-1",
+	"ironing_flow": "8%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "200",
+	"overhang_1_4_speed": "60",
+	"overhang_2_4_speed": "30",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "10000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "450",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.08",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "60%",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "15",
+	"support_top_z_distance": "0.08",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "9",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "200",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "eSyZsnWMuOyokoLr",
+	"instantiation": "true",
+	"print_settings_id": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
+	"layer_height": "0.1",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.2 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "outer_only",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "10",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.075",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "0",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "100",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "10",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "30",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.25",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.1",
+	"initial_layer_speed": "30",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "10",
+	"inner_wall_line_width": "0.22",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "100%",
+	"internal_solid_infill_line_width": "0.22",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "120",
+	"ironing_angle": "-1",
+	"ironing_flow": "15%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.22",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "10",
+	"outer_wall_line_width": "0.22",
+	"outer_wall_speed": "80",
+	"overhang_1_4_speed": "60",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "2",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "100%",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "20",
+	"seam_slope_start_height": "0",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.22",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "150",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.1",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.22",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "40",
+	"support_top_z_distance": "0.1",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "25%",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.22",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "120",
+	"travel_acceleration": "15000",
+	"travel_jerk": "12",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "4",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,58 @@
+{
+	"type": "process",
+	"name": "0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"from": "system",
+	"setting_id": "HqXRokM0mAA691LV",
+	"instantiation": "true",
+	"print_settings_id": "0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.12",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"bottom_shell_thickness": "0",
+	"bridge_acceleration": "2000",
+	"bridge_speed": "30",
+	"brim_type": "auto_brim",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"gap_infill_speed": "180",
+	"initial_layer_infill_speed": "50",
+	"initial_layer_speed": "50",
+	"inner_wall_acceleration": "4000",
+	"inner_wall_jerk": "9",
+	"inner_wall_speed": "150",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_speed": "180",
+	"ironing_flow": "10%",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "60",
+	"overhang_2_4_speed": "30",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"prime_tower_width": "35",
+	"raft_first_layer_expansion": "5",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"seam_slope_conditional": "1",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"small_perimeter_speed": "50%",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_speed": "180",
+	"support_interface_top_layers": "2",
+	"support_threshold_angle": "20",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_speed": "150",
+	"travel_acceleration": "5000",
+	"travel_jerk": "9",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wipe_on_loops": "0",
+	"wipe_tower_extra_spacing": "120%"
+}

resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "NCKx6glFcaEOhqZC",
+	"instantiation": "true",
+	"print_settings_id": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.12",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "5000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "350",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "300",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "200",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "130",
+	"overhang_1_4_speed": "60",
+	"overhang_2_4_speed": "30",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "30%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "10000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "430",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.12",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_top_layers": "3",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "60%",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "20",
+	"support_top_z_distance": "0.12",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.6",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "200",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,51 @@
+{
+	"type": "process",
+	"name": "0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"from": "system",
+	"setting_id": "mVDCX89vYKfBA57g",
+	"instantiation": "true",
+	"print_settings_id": "0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.16",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"bottom_shell_thickness": "0",
+	"bridge_acceleration": "2000",
+	"default_acceleration": "4000",
+	"default_jerk": "9",
+	"infill_anchor_max": "20",
+	"initial_layer_infill_speed": "50",
+	"initial_layer_speed": "50",
+	"inner_wall_acceleration": "4000",
+	"inner_wall_jerk": "9",
+	"internal_solid_infill_acceleration": "4000",
+	"internal_solid_infill_speed": "200",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_speed": "150",
+	"overhang_1_4_speed": "60",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"prime_tower_width": "30",
+	"raft_first_layer_expansion": "5",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"seam_slope_conditional": "1",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"small_perimeter_speed": "50%",
+	"sparse_infill_acceleration": "4000",
+	"sparse_infill_speed": "200",
+	"support_line_width": "0.42",
+	"support_threshold_angle": "25",
+	"top_bottom_infill_wall_overlap": "15%",
+	"travel_acceleration": "4000",
+	"travel_jerk": "9",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wipe_on_loops": "0",
+	"wipe_tower_extra_spacing": "120%"
+}

resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "ut3FZjM7h3doFjRg",
+	"instantiation": "true",
+	"print_settings_id": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.16",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "5000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "250",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "200",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "10000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "130",
+	"overhang_1_4_speed": "60",
+	"overhang_2_4_speed": "30",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "30%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "300",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.16",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "60%",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "25",
+	"support_top_z_distance": "0.16",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "6",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,57 @@
+{
+	"type": "process",
+	"name": "0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"from": "system",
+	"setting_id": "V7T6yBxuQzWucCpA",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.2",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"bottom_shell_thickness": "0",
+	"bridge_acceleration": "4000",
+	"bridge_speed": "50",
+	"brim_object_gap": "0.1",
+	"brim_width": "5",
+	"default_acceleration": "4000",
+	"default_jerk": "9",
+	"initial_layer_infill_speed": "50",
+	"initial_layer_speed": "50",
+	"inner_wall_acceleration": "4000",
+	"inner_wall_jerk": "9",
+	"inner_wall_speed": "150",
+	"internal_solid_infill_acceleration": "4000",
+	"internal_solid_infill_speed": "250",
+	"ironing_flow": "10%",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_speed": "60",
+	"overhang_4_4_speed": "10",
+	"prime_tower_width": "30",
+	"raft_first_layer_expansion": "5",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"seam_slope_conditional": "1",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"sparse_infill_acceleration": "4000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "270",
+	"support_line_width": "0.42",
+	"support_threshold_angle": "30",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_speed": "200",
+	"travel_acceleration": "4000",
+	"travel_jerk": "9",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wipe_on_loops": "0",
+	"wipe_tower_extra_spacing": "120%"
+}

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "K5se4jnf2XHJNkEQ",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.2",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "5000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "250",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "200",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "10000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "130",
+	"ironing_angle": "-1",
+	"ironing_flow": "15%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "130",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "30%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "300",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.4",
+	"support_object_xy_distance": "60%",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_top_z_distance": "0.25",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "130",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "cg8f6Q9o8nRePSC9",
+	"instantiation": "true",
+	"print_settings_id": "0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.24",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "5000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "200",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "10",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "200",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "10000",
+	"internal_solid_infill_line_width": "0.45",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "200",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "30%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "200",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "60%",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "35",
+	"support_top_z_distance": "0.2",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "180",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,24 @@
+{
+	"type": "process",
+	"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"from": "system",
+	"setting_id": "DhqKrBJZh4W22xna",
+	"instantiation": "true",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"print_settings_id": "0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"layer_height": "0.24",
+	"brim_type": "auto_brim",
+	"default_acceleration": "6000",
+	"default_jerk": "9",
+	"elefant_foot_compensation": "0.1",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"outer_wall_jerk": "9",
+	"raft_first_layer_expansion": "5",
+	"sparse_infill_acceleration": "6000",
+	"support_threshold_angle": "30",
+	"top_bottom_infill_wall_overlap": "15%",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9"
+}

resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "Qe8XQonRxfA8Jei1",
+	"instantiation": "true",
+	"print_settings_id": "0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.28",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "2000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "200",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "200",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "10000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "180",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "0%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "30%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "200",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "60%",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "40",
+	"support_top_z_distance": "0.2",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "25%",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "180",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "13ES5eks7VTR3G2E",
+	"instantiation": "true",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"print_settings_id": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"layer_height": "0.3",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "500",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "outer_only",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "20",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.075",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "10",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "30",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.62",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.3",
+	"initial_layer_speed": "30",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "10000",
+	"inner_wall_jerk": "15",
+	"inner_wall_line_width": "0.62",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.62",
+	"internal_solid_infill_pattern": "monotonic",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "15%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.62",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "0",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "15",
+	"outer_wall_line_width": "0.62",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "2",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "35",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "0",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "10000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.62",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "100",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "3",
+	"support_line_width": "0.62",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "40",
+	"support_top_z_distance": "0.25",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "25%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.6",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "5000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.62",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "15000",
+	"travel_jerk": "12",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "150%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,17 @@
+{
+	"type": "process",
+	"name": "0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"from": "system",
+	"setting_id": "avPzsOBN3DnXTaol",
+	"instantiation": "true",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"print_settings_id": "0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"layer_height": "0.32",
+	"initial_layer_print_height": "0.32",
+	"inner_wall_speed": "120",
+	"outer_wall_speed": "80",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "30",
+	"top_solid_infill_flow_ratio": "0.95"
+}

resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,24 @@
+{
+	"type": "process",
+	"name": "0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"from": "system",
+	"setting_id": "7pIVSig189FDjOMY",
+	"instantiation": "true",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"print_settings_id": "0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"layer_height": "0.36",
+	"brim_type": "auto_brim",
+	"default_acceleration": "6000",
+	"default_jerk": "9",
+	"elefant_foot_compensation": "0.1",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"outer_wall_jerk": "9",
+	"raft_first_layer_expansion": "5",
+	"sparse_infill_acceleration": "6000",
+	"support_threshold_angle": "30",
+	"top_bottom_infill_wall_overlap": "15%",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9"
+}

resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "0yxg7c5tH07ZMIL4",
+	"instantiation": "true",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"print_settings_id": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"layer_height": "0.4",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "5000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "outer_only",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "6000",
+	"default_jerk": "20",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "1",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "10",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "30",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.4",
+	"initial_layer_speed": "30",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "0",
+	"inner_wall_jerk": "15",
+	"inner_wall_line_width": "0.82",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "10000",
+	"internal_solid_infill_line_width": "0.82",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "15%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.82",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "0",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "15",
+	"outer_wall_line_width": "0.82",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "25",
+	"overhang_4_4_speed": "5",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "2",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "100%",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "20",
+	"seam_slope_start_height": "0",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.82",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "100",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "3",
+	"support_line_width": "0.82",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "40",
+	"support_top_z_distance": "0.25",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "25%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.82",
+	"top_surface_pattern": "monotonic",
+	"top_surface_speed": "150",
+	"travel_acceleration": "10000",
+	"travel_jerk": "12",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "1.5",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "150%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,17 @@
+{
+	"type": "process",
+	"name": "0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"from": "system",
+	"setting_id": "2cCCPfRX7H33XrMb",
+	"instantiation": "true",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"print_settings_id": "0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"layer_height": "0.48",
+	"initial_layer_print_height": "0.48",
+	"inner_wall_speed": "180",
+	"outer_wall_speed": "140",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "30",
+	"top_solid_infill_flow_ratio": "0.95"
+}

resources/profiles/BBL.json

@@ -1,7 +1,7 @@
 {
 	"name": "Bambulab",
 	"url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-	"version": "02.01.00.28",
+	"version": "02.01.00.29",
 	"force_update": "0",
 	"description": "BBL configurations",
 	"machine_model_list": [

resources/profiles/CoLiDo.json

@@ -1,6 +1,6 @@
 {
 	"name": "CoLiDo",
-	"version": "02.04.00.05",
+	"version": "02.04.00.06",
 	"force_update": "0",
 	"description": "CoLiDo configurations",
 	"machine_model_list": [

resources/profiles/Creality.json

@@ -1,6 +1,6 @@
 {
 	"name": "Creality",
-	"version": "02.03.02.84",
+	"version": "02.03.02.85",
 	"force_update": "0",
 	"description": "Creality configurations",
 	"machine_model_list": [

resources/profiles/Creality/creality_SPARKX_buildplate_texture.svg

@@ -0,0 +1 @@
+<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 260 260"><path d="M258.54,260h-74.09c-.98,0-1.41-1.25-.62-1.85l12.39-9.46c.64-.49,1.41-.75,2.21-.75h60.11c.81,0,1.46.65,1.46,1.46v9.13c0,.81-.65,1.46-1.46,1.46ZM60.57,248.53c.67,0,1.33.22,1.86.63l12.39,9.46c.24.18.18.43.15.5-.02.07-.13.31-.43.31H18.89c-.49,0-.95-.27-1.19-.69l-5.37-9.4c-.14-.24-.04-.46,0-.54.05-.08.19-.27.47-.27h47.78M61.57,247.95H11.79c-.86,0-1.39.93-.97,1.67l5.37,9.4c.35.61.99.98,1.7.98h57.66c.98,0,1.41-1.25.62-1.85l-12.39-9.46c-.64-.49-1.41-.75-2.21-.75h0Z" style="fill:#bcbec0;"/><path d="M206.02,251.67s-.02.05-.05.05l-4.24.02c-1.25,0-2.26,1.03-2.25,2.28.02,1.24,1.05,2.22,2.28,2.22h4.21s.05.02.05.05v1.33s-.02.05-.05.05h-4.2c-2.08,0-3.78-1.71-3.72-3.79.06-1.94,1.62-3.51,3.55-3.57l4.37-.02s.05.02.05.05v1.33ZM214.8,257.67h-1.88s-.03,0-.03-.01l-4.31-4.32s0-.08.03-.08h3.78c.43,0,.78-.36.77-.8-.02-.42-.37-.74-.79-.74h-3.96s-.05.02-.05.05v5.85s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-7.29s.02-.05.05-.05h5.37c1.21,0,2.21.96,2.23,2.17.02,1.23-.97,2.23-2.19,2.23h-.45s2.89,2.9,2.89,2.9c.03.03,0,.08-.03.08ZM223.18,251.67s-.02.05-.05.05h-4.14c-1,0-1.84.65-2.15,1.54h6.28s.05.02.05.05v1.33s-.02.05-.05.05h-6.28c.3.9,1.15,1.54,2.15,1.54h4.14s.05.02.05.05v1.33s-.02.05-.05.05h-4.14c-2.04,0-3.7-1.66-3.7-3.69s1.66-3.69,3.7-3.69h4.14s.05.02.05.05v1.33ZM232.48,257.67c-.6,0-4.28,0-5.53,0-.02-.03-.02-.04-.04-.08l.77-1.33s.03-.02.04-.02h2.28s.02-.04.04-.08l-1.75-3.04h-.09l-2.61,4.52s-.03.02-.04.03h-1.53s-.02-.04-.04-.08l4.18-7.26c.04-.06.13-.06.17,0,0,0,3.73,6.48,4.18,7.26.02.03,0,.07-.04.07ZM239.25,257.62s-.02.05-.05.05h-5.3c-.45,0-.82-.37-.82-.83v-6.51s.02-.05.05-.05h1.33s.05.02.05.05v5.85s.02.05.05.05h4.64s.05.02.05.05v1.33ZM241.51,257.62s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-7.28s.02-.05.05-.05h1.33s.05.02.05.05v7.28ZM253.52,254.72s-.01.02-.01.03v2.86s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-2.86s0-.02-.01-.03l-2.51-2.99s-.02-.02-.04-.02h-2.89s-.05.02-.05.05v5.85s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-5.85s-.02-.05-.05-.05h-2.88s-.05-.02-.05-.05v-1.33s.02-.05.05-.05h7.96s.03,0,.04.02l2.53,3.02s.05.02.07,0l2.53-3.02s.02-.02.04-.02h1.74s.06.05.04.08l-3.65,4.36Z" style="fill:#393939;"/><path d="M6.64,248.53c.44,0,.84.23,1.06.62l4.83,8.44c.22.38.22.84,0,1.22s-.62.61-1.06.61H1.81c-.44,0-.84-.23-1.06-.61s-.22-.84,0-1.22l4.83-8.44c.22-.39.62-.62,1.06-.62M6.64,247.95c-.61,0-1.22.3-1.57.91l-4.83,8.44c-.69,1.2.18,2.7,1.57,2.7h9.67c1.39,0,2.25-1.5,1.57-2.7l-4.83-8.44c-.35-.61-.96-.91-1.57-.91h0Z" style="fill:#bcbec0;"/><path d="M8.03,251.42c-.67.48-.7,1.14-.09,1.98.6.83.55,1.43-.15,1.81M6.75,251.42c-.67.48-.7,1.14-.09,1.98.6.83.55,1.43-.15,1.81M5.49,251.42c-.67.48-.7,1.14-.09,1.98.6.83.55,1.43-.15,1.81M2.59,258.11h8.09M9.87,257.04H3.5M4.28,256.05h4.82" style="fill:none; stroke:#bcbec0; stroke-linecap:round; stroke-miterlimit:10; stroke-width:.61px;"/></svg>

resources/profiles/Creality/creality_ender3v4_buildplate_texture.svg

@@ -0,0 +1 @@
+<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 260 260"><path d="M258.54,260h-74.09c-.98,0-1.41-1.25-.62-1.85l12.39-9.46c.64-.49,1.41-.75,2.21-.75h60.11c.81,0,1.46.65,1.46,1.46v9.13c0,.81-.65,1.46-1.46,1.46ZM60.57,248.53c.67,0,1.33.22,1.86.63l12.39,9.46c.24.18.18.43.15.5-.02.07-.13.31-.43.31H18.89c-.49,0-.95-.27-1.19-.69l-5.37-9.4c-.14-.24-.04-.46,0-.54.05-.08.19-.27.47-.27h47.78M61.57,247.95H11.79c-.86,0-1.39.93-.97,1.67l5.37,9.4c.35.61.99.98,1.7.98h57.66c.98,0,1.41-1.25.62-1.85l-12.39-9.46c-.64-.49-1.41-.75-2.21-.75h0Z" style="fill:#bcbec0;"/><path d="M206.02,251.67s-.02.05-.05.05l-4.24.02c-1.25,0-2.26,1.03-2.25,2.28.02,1.24,1.05,2.22,2.28,2.22h4.21s.05.02.05.05v1.33s-.02.05-.05.05h-4.2c-2.08,0-3.78-1.71-3.72-3.79.06-1.94,1.62-3.51,3.55-3.57l4.37-.02s.05.02.05.05v1.33ZM214.8,257.67h-1.88s-.03,0-.03-.01l-4.31-4.32s0-.08.03-.08h3.78c.43,0,.78-.36.77-.8-.02-.42-.37-.74-.79-.74h-3.96s-.05.02-.05.05v5.85s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-7.29s.02-.05.05-.05h5.37c1.21,0,2.21.96,2.23,2.17.02,1.23-.97,2.23-2.19,2.23h-.45s2.89,2.9,2.89,2.9c.03.03,0,.08-.03.08ZM223.18,251.67s-.02.05-.05.05h-4.14c-1,0-1.84.65-2.15,1.54h6.28s.05.02.05.05v1.33s-.02.05-.05.05h-6.28c.3.9,1.15,1.54,2.15,1.54h4.14s.05.02.05.05v1.33s-.02.05-.05.05h-4.14c-2.04,0-3.7-1.66-3.7-3.69s1.66-3.69,3.7-3.69h4.14s.05.02.05.05v1.33ZM232.48,257.67c-.6,0-4.28,0-5.53,0-.02-.03-.02-.04-.04-.08l.77-1.33s.03-.02.04-.02h2.28s.02-.04.04-.08l-1.75-3.04h-.09l-2.61,4.52s-.03.02-.04.03h-1.53s-.02-.04-.04-.08l4.18-7.26c.04-.06.13-.06.17,0,0,0,3.73,6.48,4.18,7.26.02.03,0,.07-.04.07ZM239.25,257.62s-.02.05-.05.05h-5.3c-.45,0-.82-.37-.82-.83v-6.51s.02-.05.05-.05h1.33s.05.02.05.05v5.85s.02.05.05.05h4.64s.05.02.05.05v1.33ZM241.51,257.62s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-7.28s.02-.05.05-.05h1.33s.05.02.05.05v7.28ZM253.52,254.72s-.01.02-.01.03v2.86s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-2.86s0-.02-.01-.03l-2.51-2.99s-.02-.02-.04-.02h-2.89s-.05.02-.05.05v5.85s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-5.85s-.02-.05-.05-.05h-2.88s-.05-.02-.05-.05v-1.33s.02-.05.05-.05h7.96s.03,0,.04.02l2.53,3.02s.05.02.07,0l2.53-3.02s.02-.02.04-.02h1.74s.06.05.04.08l-3.65,4.36Z" style="fill:#393939;"/><path d="M6.64,248.53c.44,0,.84.23,1.06.62l4.83,8.44c.22.38.22.84,0,1.22s-.62.61-1.06.61H1.81c-.44,0-.84-.23-1.06-.61s-.22-.84,0-1.22l4.83-8.44c.22-.39.62-.62,1.06-.62M6.64,247.95c-.61,0-1.22.3-1.57.91l-4.83,8.44c-.69,1.2.18,2.7,1.57,2.7h9.67c1.39,0,2.25-1.5,1.57-2.7l-4.83-8.44c-.35-.61-.96-.91-1.57-.91h0Z" style="fill:#bcbec0;"/><path d="M8.03,251.42c-.67.48-.7,1.14-.09,1.98.6.83.55,1.43-.15,1.81M6.75,251.42c-.67.48-.7,1.14-.09,1.98.6.83.55,1.43-.15,1.81M5.49,251.42c-.67.48-.7,1.14-.09,1.98.6.83.55,1.43-.15,1.81M2.59,258.11h8.09M9.87,257.04H3.5M4.28,256.05h4.82" style="fill:none; stroke:#bcbec0; stroke-linecap:round; stroke-miterlimit:10; stroke-width:.61px;"/></svg>

resources/profiles/Creality/filament/CR-ABS @K2 Plus-all.json

@@ -46,7 +46,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"10"
+		"18"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"

resources/profiles/Creality/filament/CR-PETG @K2 Plus-all.json

@@ -40,7 +40,7 @@
 		"14"
 	],
 	"filament_density": [
-		"1.23"
+		"1.24"
 	],
 	"filament_flow_ratio": [
 		"0.95"
@@ -49,10 +49,10 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"12"
+		"18"
 	],
 	"filament_retraction_length": [
-		"0.8"
+		"1.2"
 	],
 	"filament_type": [
 		"PETG"
@@ -67,10 +67,10 @@
 		"70"
 	],
 	"nozzle_temperature": [
-		"250"
+		"240"
 	],
 	"nozzle_temperature_initial_layer": [
-		"250"
+		"240"
 	],
 	"nozzle_temperature_range_high": [
 		"270"
@@ -79,7 +79,7 @@
 		"220"
 	],
 	"overhang_fan_speed": [
-		"90"
+		"100"
 	],
 	"overhang_fan_threshold": [
 		"25%"
@@ -94,7 +94,7 @@
 		"20"
 	],
 	"temperature_vitrification": [
-		"80"
+		"60"
 	],
 	"textured_plate_temp": [
 		"70"

resources/profiles/Creality/filament/CR-PLA @K2 Plus-all.json

@@ -46,7 +46,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"16"
+		"18"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"

resources/profiles/Creality/filament/CR-PLA Fluo @K2 Plus-all.json

@@ -46,7 +46,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"16"
+		"18"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"

resources/profiles/Creality/filament/CR-PLA Matte @K2 Plus-all.json

@@ -49,7 +49,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"12"
+		"18"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"

resources/profiles/Creality/filament/CR-Silk @K2 Plus-all.json

@@ -49,7 +49,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"12"
+		"10"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -100,10 +100,10 @@
 		"50"
 	],
 	"nozzle_temperature": [
-		"230"
+		"220"
 	],
 	"nozzle_temperature_initial_layer": [
-		"230"
+		"220"
 	],
 	"nozzle_temperature_range_high": [
 		"240"

resources/profiles/Creality/filament/ENDER FAST PLA @K2 Plus-all.json

@@ -49,7 +49,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"16"
+		"23"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -155,7 +155,7 @@
 	"filament_unloading_speed_start": "100",
 	"material_flow_dependent_temperature": "0",
 	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-	"pressure_advance": "0.05",
+	"pressure_advance": "0.04",
 	"support_material_interface_fan_speed": "-1",
 	"compatible_printers": [
 		"Creality K2 Plus 0.2 nozzle",

resources/profiles/Creality/filament/HP-ASA @K2 Plus-all.json

@@ -58,7 +58,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"10"
+		"14"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"

resources/profiles/Creality/filament/Hyper PETG @K2 Plus-all.json

@@ -40,7 +40,7 @@
 		"40"
 	],
 	"filament_cost": [
-		"24.99"
+		"25"
 	],
 	"filament_density": [
 		"1.28"
@@ -52,13 +52,13 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"18"
+		"23"
 	],
 	"filament_retract_before_wipe": [
 		"100"
 	],
 	"filament_retraction_length": [
-		"0.8"
+		"1.2"
 	],
 	"filament_type": [
 		"PETG"
@@ -97,7 +97,7 @@
 		"20"
 	],
 	"temperature_vitrification": [
-		"74.3"
+		"75"
 	],
 	"textured_plate_temp": [
 		"70"
@@ -136,7 +136,7 @@
 	"filament_unloading_speed": "90",
 	"filament_unloading_speed_start": "100",
 	"material_flow_dependent_temperature": "0",
-	"pressure_advance": "0.07",
+	"pressure_advance": "0.05",
 	"support_material_interface_fan_speed": "-1",
 	"compatible_printers": [
 		"Creality K2 Plus 0.2 nozzle",

resources/profiles/Creality/filament/Hyper PLA @K2 Plus-all.json

@@ -31,7 +31,7 @@
 		"50"
 	],
 	"filament_cost": [
-		"30"
+		"20"
 	],
 	"filament_deretraction_speed": [
 		"nil"
@@ -46,7 +46,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"21"
+		"23"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -146,7 +146,7 @@
 	"filament_unloading_speed_start": "100",
 	"material_flow_dependent_temperature": "0",
 	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-	"pressure_advance": "0.04",
+	"pressure_advance": "0.044",
 	"support_material_interface_fan_speed": "-1",
 	"compatible_printers": [
 		"Creality K2 Plus 0.2 nozzle",

resources/profiles/Creality/machine/Creality Ender-3 V4.json

@@ -2,9 +2,9 @@
 	"type": "machine_model",
 	"name": "Creality Ender-3 V4",
 	"nozzle_diameter": "0.4",
-	"bed_model": "creality_ender3v3_buildplate_model.stl",
+	"bed_model": "creality_ender3v4_buildplate_model.stl",
 	"default_bed_type": "Textured PEI Plate",
-	"bed_texture": "creality_ender3v3_buildplate_texture.svg",
+	"bed_texture": "creality_ender3v4_buildplate_texture.svg",
 	"family": "Creality",
 	"hotend_model": "",
 	"machine_tech": "FFF",

resources/profiles/Creality/machine/Creality SPARKX i7.json

@@ -4,7 +4,7 @@
 	"nozzle_diameter": "0.8;0.6;0.4;0.2",
 	"bed_model": "creality_SPARKX_buildplate_model.stl",
 	"default_bed_type": "Textured PEI Plate",
-	"bed_texture": "creality_hi_buildplate_texture.svg",
+	"bed_texture": "creality_SPARKX_buildplate_texture.svg",
 	"family": "Creality",
 	"hotend_model": "",
 	"machine_tech": "FFF",

resources/profiles/Cubicon.json

@@ -1,6 +1,6 @@
 {
 	"name": "Cubicon",
-	"version": "02.04.00.06",
+	"version": "02.04.00.07",
 	"force_update": "0",
 	"description": "Cubicon configurations",
 	"machine_model_list": [

resources/profiles/Elegoo.json

@@ -1,6 +1,6 @@
 {
 	"name": "Elegoo",
-	"version": "02.04.00.09",
+	"version": "02.04.00.10",
 	"force_update": "0",
 	"description": "Elegoo configurations",
 	"machine_model_list": [

resources/profiles/Flashforge.json

@@ -1,7 +1,7 @@
 {
 	"name": "Flashforge",
 	"url": "",
-	"version": "02.04.00.09",
+	"version": "02.04.00.10",
 	"force_update": "0",
 	"description": "Flashforge configurations",
 	"machine_model_list": [