Move the G-code processing result instead of copying it

GCodeProcessorResult declares a copy assignment, which suppresses the implicit
move assignment, so `*result = std::move(processor.extract_result())` binds to
the copy and duplicates the whole moves array: 96 bytes per move, measured at
147.7 MiB in one allocation for a 597k facet model at 0.08 mm, with the source
staying alive until the export returns.

Add the move assignment. It assigns exactly the same 39 members in the same
order as the copy, including the ones the copy deliberately leaves alone, so a
target that carries its own filament maps and nozzle type keeps them. A move
constructor is intentionally not added: the type holds a std::mutex, so it is
neither copy nor move constructible today and a partial one would leave ten
members uninitialised.

reset() now releases the two print sized vectors rather than clearing them. Its
callers are the paths that discard a result, so the memory went back only at the
next slice.

ViewerImpl::reset() does the same for the two vectors sized by the print, which
is what keeps a discarded preview resident, and counts m_vertices_colors in the
reported CPU memory, where it was missing.

src/libslic3r/GCode/GCodeProcessor.cpp

@@ -2582,8 +2582,12 @@ void GCodeProcessorResult::reset() {
     //BBS: add mutex for protection of gcode result
     lock();
 
-    moves.clear();
+    // release rather than clear: these two are sized by the print - one entry per move and one
-    lines_ends.clear();
+    // per g-code line - and a reset is where the memory is expected to go back to the allocator
+    // (see BackgroundSlicingProcess::apply()). The capacity would not be reused anyway: the
+    // result is refilled by move-assigning the processor's own result.
+    moves = std::vector<MoveVertex>();
+    lines_ends = std::vector<size_t>();
     printable_area = Pointfs();
     //BBS: add bed exclude area
     bed_exclude_area = Pointfs();

src/libslic3r/GCode/GCodeProcessor.hpp

@@ -369,6 +369,56 @@ class Print;
             initial_layer_time = other.initial_layer_time;
 #if ENABLE_GCODE_VIEWER_STATISTICS
             time = other.time;
+#endif
+            return *this;
+        }
+        // Orca: the user-declared copy assignment above suppresses the implicit move assignment, so
+        // `*result = std::move(processor.extract_result())` used to deep copy 'moves' (one MoveVertex
+        // per move, gigabytes on a large print) while the source stayed alive. This moves exactly the
+        // same members as the copy above, with the same omissions, so the members the copy leaves
+        // untouched on the target are left untouched here too.
+        GCodeProcessorResult& operator=(GCodeProcessorResult &&other)
+        {
+            filename = std::move(other.filename);
+            id = other.id;
+            moves = std::move(other.moves);
+            lines_ends = std::move(other.lines_ends);
+            printable_area = std::move(other.printable_area);
+            bed_exclude_area = std::move(other.bed_exclude_area);
+            wrapping_exclude_area = std::move(other.wrapping_exclude_area);
+            toolpath_outside = other.toolpath_outside;
+            label_object_enabled = other.label_object_enabled;
+            long_retraction_when_cut = other.long_retraction_when_cut;
+            timelapse_warning_code = other.timelapse_warning_code;
+            printable_height = other.printable_height;
+            settings_ids = std::move(other.settings_ids);
+            filaments_count = other.filaments_count;
+            extruder_colors = std::move(other.extruder_colors);
+            filament_diameters = std::move(other.filament_diameters);
+            filament_densities = std::move(other.filament_densities);
+            filament_costs = std::move(other.filament_costs);
+            print_statistics = std::move(other.print_statistics);
+            custom_gcode_per_print_z = std::move(other.custom_gcode_per_print_z);
+            spiral_vase_mode = other.spiral_vase_mode;
+            warnings = std::move(other.warnings);
+            bed_type = other.bed_type;
+            gcode_check_result = std::move(other.gcode_check_result);
+            limit_filament_maps = std::move(other.limit_filament_maps);
+            filament_printable_reuslt = std::move(other.filament_printable_reuslt);
+            nozzle_group_result = std::move(other.nozzle_group_result);
+            extruder_types = std::move(other.extruder_types);
+            printer_extruder_variant = std::move(other.printer_extruder_variant);
+            printer_extruder_id = std::move(other.printer_extruder_id);
+            layer_filaments = std::move(other.layer_filaments);
+            filament_change_sequence = std::move(other.filament_change_sequence);
+            used_mixed_filaments = std::move(other.used_mixed_filaments);
+            nozzle_change_sequence = std::move(other.nozzle_change_sequence);
+            optimal_assignment = std::move(other.optimal_assignment);
+            filament_change_count_map = std::move(other.filament_change_count_map);
+            skippable_part_time = std::move(other.skippable_part_time);
+            initial_layer_time = other.initial_layer_time;
+#if ENABLE_GCODE_VIEWER_STATISTICS
+            time = other.time;
 #endif
             return *this;
         }

src/libvgcode/src/ViewerImpl.cpp

@@ -883,15 +883,17 @@ void ViewerImpl::reset()
     m_used_extruders.clear();
     m_total_time = { 0.0f, 0.0f };
     m_travels_time = { 0.0f, 0.0f };
-    m_vertices.clear();
-    m_vertices_colors.clear();
     // swap rather than clear: these are sized by the print, and a reset means the memory
     // should go back, not sit reserved until the next load
+    std::vector<PathVertex>().swap(m_vertices);
+    std::vector<float>().swap(m_vertices_colors);
     for (std::vector<float>& times : m_layer_start_times)
         std::vector<float>().swap(times);
     std::vector<uint32_t>().swap(m_layer_first_vertex);
     std::vector<float>().swap(m_colors_scratch);
-    m_valid_lines_bitset.clear();
+    // BitSet::clear() only zeroes the bits, it keeps the blocks allocated; load() builds a new
+    // bitset anyway and it is never read while m_vertices is empty
+    m_valid_lines_bitset = BitSet<>();
 #if VGCODE_ENABLE_COG_AND_TOOL_MARKERS
     m_cog_marker.reset();
 #endif // VGCODE_ENABLE_COG_AND_TOOL_MARKERS
@@ -1812,6 +1814,7 @@ size_t ViewerImpl::get_used_cpu_memory() const
     ret += sizeof(m_extrusion_roles_colors);
     ret += sizeof(m_options_colors);
     ret += STDVEC_MEMSIZE(m_vertices, PathVertex);
+    ret += STDVEC_MEMSIZE(m_vertices_colors, float);
     for (const std::vector<float>& times : m_layer_start_times)
         ret += STDVEC_MEMSIZE(times, float);
     ret += STDVEC_MEMSIZE(m_layer_first_vertex, uint32_t);