fix: Home start shows Prepare or a blank window, and Prepare opens slowly (#15878)

* Fix wall ordering edge case
* IOI performance tuning - greedy stop when a first touch is identified.

.github/workflows/ofl-ota-cronjob.yml

@@ -0,0 +1,139 @@
+name: Daily OFL OTA Update
+
+# This workflow is intended for creating and publishing the OrcaFilamentLibrary (OFL) OPC package to
+# https://github.com/OrcaSlicer/orcaslicer-profiles, which generates an OTA update.
+# This cronjob runs daily at 00:00 UTC every day and scans main plus every release/vX.Y.Z branch for
+# changes to resources/profiles/OrcaFilamentLibrary since that branch's own last successful run. Any
+# branch with no changes is skipped; each changed branch gets its own post_merge_profiles.yml dispatch.
+#
+# OFL has no dedicated FOLDER_MERGERS grant (it isn't merged through the PR merge-bot delegation
+# scheme), so post_merge_profiles.yml is dispatched with an explicit `vendor` input, which that
+# workflow trusts and uses to bypass the FOLDER_MERGERS check for this trigger. That same explicit-
+# vendor-dispatch path is also what makes post_merge_profiles.yml call the OTA auto-publish API after
+# uploading - see post_merge_profiles.yml for both sides of that contract.
+#
+# At the start of each run, the pending-publish table is cleared up to a captured
+# timestamp (POST /api/v1/ota/ofl/pending/clear?timestamp=...). Changes merged after
+# that timestamp remain pending for the next run.
+
+on:
+  schedule:
+    - cron: "0 0 * * *"
+
+  workflow_dispatch:
+
+permissions:
+  actions: write # list this workflow's past runs and dispatch post_merge_profiles.yml
+  contents: read
+
+env:
+  VENDOR: OrcaFilamentLibrary
+
+jobs:
+  daily-job:
+    if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' }}
+    runs-on: ubuntu-24.04
+    steps:
+      - name: Capture start timestamp and clear OFL pending queue
+        id: start
+        shell: bash
+        env:
+          OTA_API_BASE_URL: ${{ vars.OTA_API_BASE_URL }}
+          OTA_API_KEY: ${{ secrets.OFL_OTA_PUBLISH_KEY }}
+        run: |
+          set -euo pipefail
+          [ -n "$OTA_API_BASE_URL" ] || { echo "::error::vars.OTA_API_BASE_URL is not set"; exit 1; }
+          [ -n "$OTA_API_KEY" ] || { echo "::error::secrets.OFL_OTA_PUBLISH_KEY is not set"; exit 1; }
+
+          timestamp="$(date -u '+%Y-%m-%dT%H:%M:%SZ')"
+          echo "timestamp=$timestamp" >> "$GITHUB_OUTPUT"
+
+          resp_file="$RUNNER_TEMP/ota-pending-clear-response.json"
+          status="$(curl -sS -o "$resp_file" -w '%{http_code}' -X POST \
+            "${OTA_API_BASE_URL%/}/api/v1/ota/ofl/pending/clear?timestamp=$timestamp" \
+            -H "Authorization: Bearer $OTA_API_KEY")"
+          body="$(cat "$resp_file")"
+          echo "$body"
+
+          if [ "$status" != "200" ]; then
+            echo "::error::OTA pending-clear call failed with HTTP $status"
+            exit 1
+          fi
+
+      - name: Checkout repository
+        uses: actions/checkout@v7
+        with:
+          # Full history: the per-branch "since last successful run" check below
+          # needs to look arbitrarily far back if a prior run failed or was skipped.
+          fetch-depth: 0
+
+      - name: Fetch all branches
+        shell: bash
+        run: git fetch origin '+refs/heads/*:refs/remotes/origin/*'
+
+      - name: Scan branches and publish changed OFL profiles
+        shell: bash
+        env:
+          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          SCAN_UNTIL: ${{ steps.start.outputs.timestamp }}
+        run: |
+          set -euo pipefail
+
+          mapfile -t branches < <(
+            gh api "repos/${{ github.repository }}/branches" --paginate --jq '.[].name' \
+              | grep -E '^(main|release/v[0-9]+\.[0-9]+\.[0-9]+)$' | sort -u
+          )
+
+          for branch in "${branches[@]}"; do
+            echo "::group::$branch"
+
+            # post_merge_profiles.yml's own run history, not this workflow's: this
+            # workflow only ever runs against main (schedule, or workflow_dispatch
+            # --ref main), so its head branch never varies - filtering ITS history
+            # by $branch would never match anything except main. post_merge_profiles.yml
+            # genuinely runs per-branch (this dispatch below sets --ref "$branch"),
+            # so its history is the real per-branch checkpoint. It also means a
+            # failed publish naturally gets retried tomorrow: the checkpoint only
+            # advances on a run that actually succeeded.
+            # --method GET is required, not cosmetic: gh api defaults to POST
+            # whenever -f fields are present unless a method is given
+            # explicitly, and POST on this list-runs endpoint 404s - confirmed
+            # on real Actions infrastructure, not just reasoned about.
+            since="$(gh api --method GET "repos/${{ github.repository }}/actions/workflows/post_merge_profiles.yml/runs" \
+              -f status=success -f branch="$branch" -f per_page=1 \
+              --jq '.workflow_runs[0].run_started_at // empty')"
+
+            if [ -z "$since" ]; then
+              echo "No prior successful run for $branch; checking OFL changes up to $SCAN_UNTIL."
+              changed_files="$(git log --until="$SCAN_UNTIL" --name-only --pretty=format: "origin/$branch" -- \
+                resources/profiles/OrcaFilamentLibrary resources/profiles/OrcaFilamentLibrary.json \
+                | sed '/^$/d')"
+            else
+              changed_files="$(git log --since="$since" --until="$SCAN_UNTIL" --name-only --pretty=format: "origin/$branch" -- \
+                resources/profiles/OrcaFilamentLibrary resources/profiles/OrcaFilamentLibrary.json \
+                | sed '/^$/d')"
+            fi
+
+            if [ -n "$changed_files" ]; then
+              echo "OFL changed on $branch from ${since:-the beginning} through $SCAN_UNTIL:"
+              echo "$changed_files"
+              changed=true
+            else
+              echo "No OFL changes on $branch through $SCAN_UNTIL."
+              changed=false
+            fi
+
+            if [ "$changed" = true ]; then
+              # Tolerate a per-branch failure (e.g. a pre-existing release branch
+              # whose post_merge_profiles.yml predates the vendor/auto_publish
+              # inputs) rather than aborting the whole scan under set -e.
+              if ! gh workflow run post_merge_profiles.yml \
+                --repo "${{ github.repository }}" \
+                --ref "$branch" \
+                -f vendor="$VENDOR" -f auto_publish=true; then
+                echo "::warning::failed to dispatch post_merge_profiles.yml for $branch - its post_merge_profiles.yml at this ref may predate the vendor/auto_publish inputs"
+              fi
+            fi
+
+            echo "::endgroup::"
+          done

.github/workflows/post_merge_profiles.yml

@@ -8,6 +8,19 @@ name: Post-merge profiles
 # only then does it become a live OTA update - this workflow does none of that
 # last part (no changelog, no R2, no webhook).
 #
+# A workflow_dispatch carrying a `vendor` input (e.g. the daily OFL cron - OFL has
+# no FOLDER_MERGERS grant, since it isn't merged through the PR merge-bot delegation
+# scheme) publishes that vendor directly and skips the FOLDER_MERGERS check below.
+# workflow_dispatch is already a trusted, explicit trigger, unlike the automatic
+# push-diff path the FOLDER_MERGERS check exists to gate.
+#
+# Separately, an ordinary push whose diff touches an OrcaFilamentLibrary company
+# folder (resources/profiles/OrcaFilamentLibrary/filament/<Company>/**) records
+# that PR as pending via POST /api/v1/ota/ofl/pending, regardless of whether
+# OrcaFilamentLibrary as a whole is authorized to publish in this same run - a
+# partner's OTA Manager dashboard should see a merged PR immediately, well
+# before the daily cron actually builds and publishes it.
+#
 # Asset contract expected by OrcaCloud's release scanner:
 #   ^(\d+\.\d+\.\d+)_([^_]+)_(\d+(?:\.\d+){3})_(\d{12})\.zip$
 #     <orca_ver>_<vendor>_<profile_version>_<UTC yyyymmddHHMM>.zip   (zip root: <vendor>.opc)
@@ -17,16 +30,39 @@ name: Post-merge profiles
 on:
   push:
     branches:
+    # once v2.5.0 stable is released, this will be removed, so nightly won't receive OTA updates.
     - main
-    - release/*
+    # release/vX.Y.Z point-release branches only, not the release/vX.Y working
+    # branch profile PRs land on first - "v*.*.*" requires two literal dots,
+    # which release/vX.Y (one dot) doesn't have.
+    - release/v*.*.*
     paths:
     - 'resources/profiles/**'
     - '.github/workflows/post_merge_profiles.yml'
 
   workflow_dispatch:
+    inputs:
+      vendor:
+        description: >-
+          Publish only this vendor, bypassing the FOLDER_MERGERS grant check.
+          For trusted explicit dispatches only (e.g. the OFL nightly cron).
+          Leave empty to fall back to diffing the triggering commit.
+        required: false
+        type: string
+      auto_publish:
+        description: >-
+          After publishing, also call the OTA auto-publish API to go live
+          immediately, skipping the human changelog/Publish step. Separate
+          from `vendor` on purpose: a maintainer can dispatch with just
+          `vendor` set to rebuild/republish an asset without it going live.
+          Only the OFL nightly cron should set this to true.
+        required: false
+        type: boolean
+        default: false
 
 permissions:
   contents: read
+  pull-requests: read  # commits/{sha}/pulls lookup in the OFL-pending step
 
 # One run per branch; let a run finish rather than cancel it, since it publishes.
 concurrency:
@@ -66,8 +102,38 @@ jobs:
         shell: bash
         env:
           FOLDER_MERGERS: ${{ vars.FOLDER_MERGERS }}
+          DISPATCH_VENDOR: ${{ github.event_name == 'workflow_dispatch' && inputs.vendor || '' }}
         run: |
           set -euo pipefail
+
+          # A vendor has a manifest plus either a preset directory or a version
+          # field; this drops non-vendor files such as blacklist.json. Shared by
+          # both the explicit-dispatch path below and the push-diff path further
+          # down, so the definition of "valid vendor" can't drift between them.
+          is_valid_vendor() {
+            local v="$1"
+            local json="resources/profiles/$v.json"
+            [ -f "$json" ] && { [ -d "resources/profiles/$v" ] || jq -e '.version' "$json" >/dev/null 2>&1; }
+          }
+
+          # Explicit vendor dispatch (e.g. the OFL cron): trust the caller and
+          # skip both the git-diff detection and the FOLDER_MERGERS check below.
+          if [ -n "$DISPATCH_VENDOR" ]; then
+            v="$DISPATCH_VENDOR"
+            # Becomes part of the release asset filename and the OTA API's
+            # payload; keep it to the same charset every real vendor name uses.
+            if ! [[ "$v" =~ ^[A-Za-z0-9]+$ ]]; then
+              echo "::error::vendor '$v' must be alphanumeric"
+              exit 1
+            fi
+            if ! is_valid_vendor "$v"; then
+              echo "::error::vendor '$v' has no resources/profiles/$v.json with a profile directory or version field"
+              exit 1
+            fi
+            echo "vendors=$v" >> "$GITHUB_OUTPUT"
+            exit 0
+          fi
+
           base='${{ github.event.before }}'
           head='${{ github.sha }}'
           # Zero SHA (branch created / force push) or manual dispatch: fall back
@@ -75,6 +141,10 @@ jobs:
           if [ -z "$base" ] || [ "$base" = "0000000000000000000000000000000000000000" ] || ! git cat-file -e "$base^{commit}" 2>/dev/null; then
             base="$head^"
           fi
+          # Exposed so the OFL-pending step below can reuse this exact diff
+          # range instead of re-deriving it (and drifting from this logic).
+          echo "base=$base" >> "$GITHUB_OUTPUT"
+          echo "head=$head" >> "$GITHUB_OUTPUT"
           mapfile -t candidates < <(
             git diff --name-only "$base" "$head" -- resources/profiles \
               | sed -nE 's#^resources/profiles/([^/]+)/.*#\1#p; s#^resources/profiles/([^/]+)\.json$#\1#p' \
@@ -84,10 +154,7 @@ jobs:
           vendors=()
           for v in "${candidates[@]:-}"; do
             [ -n "$v" ] || continue
-            json="resources/profiles/$v.json"
+            if is_valid_vendor "$v"; then
-            # A vendor has a manifest plus either a preset directory or a version
-            # field; this drops non-vendor files such as blacklist.json.
-            if [ -f "$json" ] && { [ -d "resources/profiles/$v" ] || jq -e '.version' "$json" >/dev/null 2>&1; }; then
               vendors+=("$v")
             fi
           done
@@ -101,6 +168,9 @@ jobs:
           # sibling bundle JSON are covered by at least one FOLDER_MERGERS
           # grant. The account part is intentionally ignored here: this is a
           # post-merge safety check, not an authorization check for a command.
+          # An ineligible vendor (e.g. OrcaFilamentLibrary, which has no grant)
+          # is dropped on its own - it never blocks other vendors in the same
+          # push from publishing.
           grants=()
           while IFS= read -r raw_line; do
             line="${raw_line#"${raw_line%%[![:space:]]*}"}"
@@ -127,23 +197,29 @@ jobs:
             return 1
           }
 
+          authorized=()
           unauthorized=()
           for v in "${vendors[@]}"; do
-            if ! is_granted "resources/profiles/$v" || ! is_granted "resources/profiles/$v.json"; then
+            if is_granted "resources/profiles/$v" && is_granted "resources/profiles/$v.json"; then
+              authorized+=("$v")
+            else
               unauthorized+=("$v")
             fi
           done
 
           if [ "${#unauthorized[@]}" -ne 0 ]; then
-            echo "vendors=" >> "$GITHUB_OUTPUT"
+            echo "::warning::skipping vendor(s) with no FOLDER_MERGERS grant (no asset built or published for them this run): ${unauthorized[*]}"
-            exit 0
           fi
 
-          echo "vendors=${vendors[*]}" >> "$GITHUB_OUTPUT"
+          echo "vendors=${authorized[*]}" >> "$GITHUB_OUTPUT"
 
       - name: Resolve Orca version
         id: orca
-        if: steps.vendors.outputs.vendors != ''
+        # Unconditional: needed both by the vendor-publish pipeline below (only
+        # when vendors is non-empty) and by the OFL-pending step at the end
+        # (which runs whenever OFL itself changed, even if vendors ends up
+        # empty because OFL has no FOLDER_MERGERS grant). Cheap and harmless
+        # to always resolve - version.inc is present on every commit.
         shell: bash
         run: |
           set -euo pipefail
@@ -242,3 +318,132 @@ jobs:
             echo "### Published to \`$repo\` release \`$RELEASE_TAG\`"
             for f in "$ASSET_DIR"/*.zip; do echo "- \`$(basename "$f")\`"; done
           } >> "$GITHUB_STEP_SUMMARY"
+
+      - name: Notify OTA auto-publish
+        # Gated on auto_publish specifically, not just "vendor was dispatched":
+        # a maintainer manually dispatching with vendor=OrcaFilamentLibrary (e.g.
+        # to rebuild/republish an asset while debugging) must not silently go
+        # live. Only a caller that explicitly opts in with auto_publish=true
+        # (the OFL nightly cron) skips the human changelog/Publish step.
+        if: >-
+          steps.vendors.outputs.vendors != '' && github.event_name == 'workflow_dispatch'
+          && (inputs.auto_publish == true || inputs.auto_publish == 'true')
+        shell: bash
+        env:
+          OTA_API_BASE_URL: ${{ vars.OTA_API_BASE_URL }}
+          OTA_API_KEY: ${{ secrets.OFL_OTA_PUBLISH_KEY }}
+          ASSET_DIR: ${{ steps.pkg.outputs.dir }}
+        run: |
+          set -euo pipefail
+          [ -n "$OTA_API_BASE_URL" ] || { echo "::error::vars.OTA_API_BASE_URL is not set"; exit 1; }
+          [ -n "$OTA_API_KEY" ] || { echo "::error::secrets.OFL_OTA_PUBLISH_KEY is not set"; exit 1; }
+
+          mapfile -t zip_files < <(cd "$ASSET_DIR" && ls -1 *.zip)
+          filenames_json="$(printf '%s\n' "${zip_files[@]}" | jq -R . | jq -s .)"
+          payload="$(jq -n --argjson filenames "$filenames_json" '{filenames: $filenames}')"
+
+          resp_file="$RUNNER_TEMP/ota-auto-publish-response.json"
+          status="$(curl -sS -o "$resp_file" -w '%{http_code}' -X POST \
+            "${OTA_API_BASE_URL%/}/api/v1/ota/auto-publish" \
+            -H "Authorization: Bearer $OTA_API_KEY" \
+            -H 'Content-Type: application/json' \
+            -d "$payload")"
+          body="$(cat "$resp_file")"
+          echo "$body"
+
+          if [ "$status" != "200" ]; then
+            echo "::error::OTA auto-publish call failed with HTTP $status"
+            exit 1
+          fi
+
+          # A 200 can still carry per-file "error" results (e.g. NOT_FOUND); the
+          # asset is already safely published to the profiles release above, but
+          # it never went live, so treat that as a failure worth surfacing loudly.
+          error_count="$(jq '[.results[] | select(.status == "error")] | length' <<< "$body")"
+          if [ "$error_count" != "0" ]; then
+            jq -r '.results[] | select(.status == "error") | "::error::\(.filename): \(.code) - \(.message)"' <<< "$body"
+            exit 1
+          fi
+
+      - name: Record OFL pending changes
+        # A real merge, never the cron's explicit-vendor dispatch (that's
+        # automation publishing, not a new merge to report). This covers two
+        # trigger shapes: an ordinary push, and a vendor-less workflow_dispatch
+        # - the latter is exactly what pr-merge-bot.yml's re-dispatch after a
+        # successful /bot merge looks like (a GITHUB_TOKEN-authored merge fires
+        # no push event at all, which is why that re-dispatch exists). Both
+        # land in the same diff-fallback path in "Resolve changed vendors", so
+        # base/head/orca_ver are already correctly populated either way - only
+        # this condition needs widening.
+        # Placed last in the job on purpose: a failure here must never block
+        # the vendor-publish pipeline above, which a step failing earlier in
+        # the job would do (subsequent steps without always() get skipped).
+        if: >-
+          github.event_name == 'push' ||
+          (github.event_name == 'workflow_dispatch' && !inputs.vendor)
+        shell: bash
+        env:
+          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          OTA_API_BASE_URL: ${{ vars.OTA_API_BASE_URL }}
+          OTA_API_KEY: ${{ secrets.OFL_OTA_PUBLISH_KEY }}
+        run: |
+          set -euo pipefail
+          base='${{ steps.vendors.outputs.base }}'
+          head='${{ steps.vendors.outputs.head }}'
+          orca_ver='${{ steps.orca.outputs.orca_ver }}'
+
+          # Only real vendor subdirectories under filament/, e.g.
+          # .../filament/Qidi/x.json -> "Qidi". This naturally excludes loose
+          # top-level files (.../filament/Generic PLA @System.json - no further
+          # slash to match) and is further filtered below to drop "base", the
+          # shared @base/@System inheritance folder, not a partner company.
+          mapfile -t ofl_companies < <(
+            git diff --name-only "$base" "$head" -- resources/profiles/OrcaFilamentLibrary/filament \
+              | sed -nE 's#^resources/profiles/OrcaFilamentLibrary/filament/([^/]+)/.*#\1#p' \
+              | grep -vx 'base' \
+              | sort -u
+          )
+
+          if [ "${#ofl_companies[@]}" -eq 0 ]; then
+            echo "No OFL company folders changed in this push."
+            exit 0
+          fi
+
+          [ -n "$OTA_API_BASE_URL" ] || { echo "::error::vars.OTA_API_BASE_URL is not set"; exit 1; }
+          [ -n "$OTA_API_KEY" ] || { echo "::error::secrets.OFL_OTA_PUBLISH_KEY is not set"; exit 1; }
+
+          # The head commit's own merged PR, not a per-commit walk: this
+          # assumes the ordinary one-PR-per-push shape every other merge path
+          # in this repo already assumes (pr-merge-bot.yml's re-dispatch logic
+          # does the same). A merge commit's parents don't matter here - this
+          # API call works the same regardless of merge strategy.
+          pr_json="$(gh api "repos/${{ github.repository }}/commits/$head/pulls" \
+            --jq '[.[] | select(.merged_at != null)] | sort_by(.merged_at) | last // empty')"
+
+          if [ -z "$pr_json" ]; then
+            echo "::warning::push $head touches OFL compan(y/ies) (${ofl_companies[*]}) but has no associated merged PR; skipping pending record(s)"
+            exit 0
+          fi
+          pr_number="$(jq -r '.number' <<< "$pr_json")"
+          pr_url="$(jq -r '.html_url' <<< "$pr_json")"
+          pr_title="$(jq -r '.title' <<< "$pr_json")"
+
+          for company in "${ofl_companies[@]}"; do
+            payload="$(jq -n --arg vendor "$company" --arg ver "$orca_ver" --argjson pr "$pr_number" \
+              --arg url "$pr_url" --arg title "$pr_title" \
+              '{vendor: $vendor, orcaSlicerVersion: $ver, prNumber: $pr, prUrl: $url, prTitle: $title}')"
+
+            resp_file="$RUNNER_TEMP/ofl-pending-$company.json"
+            status="$(curl -sS -o "$resp_file" -w '%{http_code}' -X POST \
+              "${OTA_API_BASE_URL%/}/api/v1/ota/ofl/pending" \
+              -H "Authorization: Bearer $OTA_API_KEY" \
+              -H 'Content-Type: application/json' \
+              -d "$payload")"
+            body="$(cat "$resp_file")"
+            echo "$body"
+
+            if [ "$status" != "200" ]; then
+              echo "::error::OFL pending record failed for vendor=$company (PR #$pr_number): HTTP $status"
+              exit 1
+            fi
+          done

CMakeLists.txt

@@ -56,9 +56,9 @@ You can do this in Environment Variables settings.
 endif ()
 
 if (APPLE)
-    # if CMAKE_OSX_DEPLOYMENT_TARGET is not set, set it to 11.3
+    # if CMAKE_OSX_DEPLOYMENT_TARGET is not set, set it to 12.0 (the lowest Xcode 27 accepts)
     if (NOT CMAKE_OSX_DEPLOYMENT_TARGET)
-        set(CMAKE_OSX_DEPLOYMENT_TARGET "11.3" CACHE STRING "Minimum OS X deployment version" FORCE)
+        set(CMAKE_OSX_DEPLOYMENT_TARGET "12.0" CACHE STRING "Minimum OS X deployment version" FORCE)
     endif ()
     message(STATUS "CMAKE_OSX_DEPLOYMENT_TARGET: ${CMAKE_OSX_DEPLOYMENT_TARGET}")
 endif ()
@@ -279,6 +279,11 @@ if (APPLE)
     endif()
     SET(CMAKE_XCODE_ATTRIBUTE_PRODUCT_BUNDLE_IDENTIFIER "com.orcaslicer.OrcaSlicer")
 
+    # The macOS CI jobs build with Ninja (build_release_macos.sh -x), so the Xcode generator
+    # is not covered. Xcode adds -Wshorten-64-to-32 by default ("Implicit Conversion to 32 Bit
+    # Type"); Ninja/-Wall does not, and under -Werror it fails Xcode builds on code CI accepts.
+    set(CMAKE_XCODE_ATTRIBUTE_GCC_WARN_64_TO_32_BIT_CONVERSION "NO")
+
     message(STATUS "Orca: IS_CROSS_COMPILE: ${IS_CROSS_COMPILE}")
 elseif (CMAKE_SYSTEM_NAME STREQUAL "Linux")
     set(CMAKE_INSTALL_RPATH "$ORIGIN")

build_release_macos.sh

@@ -53,7 +53,7 @@ while getopts ":dpa:snt:xbc:i:j:Tuh" opt; do
         echo "   -s: Build slicer only"
         echo "   -u: Build universal app only (requires existing arm64 and x86_64 app bundles)"
         echo "   -n: Nightly build"
-        echo "   -t: Specify minimum version of the target platform, default is 11.3"
+        echo "   -t: Specify minimum version of the target platform, default is 12.0"
         echo "   -x: Use Ninja Multi-Config CMake generator, default is Xcode"
         echo "   -b: Build without reconfiguring CMake"
         echo "   -c: Set CMake build configuration, default is Release"
@@ -95,7 +95,7 @@ if [ -z "$DEPS_CMAKE_GENERATOR" ]; then
 fi
 
 if [ -z "$OSX_DEPLOYMENT_TARGET" ]; then
-  export OSX_DEPLOYMENT_TARGET="11.3"
+  export OSX_DEPLOYMENT_TARGET="12.0"
 fi
 
 if [ -z "$CMAKE_IGNORE_PREFIX_PATH" ]; then

deps/CMakeLists.txt

@@ -26,9 +26,9 @@ endif()
 
 cmake_minimum_required(VERSION 3.2)
 if (APPLE)
-    # if CMAKE_OSX_DEPLOYMENT_TARGET is not set, set it to 11.3
+    # if CMAKE_OSX_DEPLOYMENT_TARGET is not set, set it to 12.0 (the lowest Xcode 27 accepts)
     if (NOT CMAKE_OSX_DEPLOYMENT_TARGET)
-        set(CMAKE_OSX_DEPLOYMENT_TARGET "11.3" CACHE STRING "Minimum OS X deployment version" FORCE)
+        set(CMAKE_OSX_DEPLOYMENT_TARGET "12.0" CACHE STRING "Minimum OS X deployment version" FORCE)
     endif ()
     message(STATUS "CMAKE_OSX_DEPLOYMENT_TARGET: ${CMAKE_OSX_DEPLOYMENT_TARGET}")
 

docs/HLSD/deferred-page-construction.md

@@ -2,219 +2,136 @@
 
 ## Why it exists
 
-The main window is a notebook of tabs. When the first frame appears, one tab is on
+The main window is a notebook of tabs, and only one of them is on screen when the first
-screen and the others are not; some of them are opened later in the session, some
+frame appears. Others are opened later in the session, some never, and some only exist
-never, and some only exist for certain printers. Building a tab before the first frame
+for certain printers. Building every tab before the first frame makes each startup pay for
-adds its cost to every startup, whether or not the tab is used.
+tabs the user may never open.
 
-This subsystem builds a tab's panel the first time the tab is shown. It also builds the
+This subsystem builds a tab the first time it is shown, and builds the rest in small units
-remaining tabs while the user is idle after startup, in units of tens of milliseconds,
+while the user is idle after startup. Startup pays only for what the first frame shows,
-so a click that lands in the middle of one waits for that unit and no longer. Startup
+the other tabs are usually ready before anyone opens them, and a click that lands in the
-pays only for what the first frame shows, and the other tabs are usually built before
+middle of the idle build waits for one unit at most. Work that is not a tab, such as a
-anyone opens them.
+dialog or the 3D view's GL resources, uses the same machinery.
 
 ## The parts
 
-`src/slic3r/GUI/Lazy.hpp`, `LazyPage.hpp`, `StagedBuild.hpp` and `IdleScheduler.hpp/.cpp`
+The parts are independent. A holder can hold anything a factory makes, a placeholder page
-(with its wx-free `PrebuildQueue.hpp`) are independent. A holder can hold anything a
+is a holder with a widget, a staged object can live outside a holder, and the scheduler
-factory makes, a page is a holder with a placeholder widget, a staged object can live
+knows none of them; it runs tasks, which the main window makes from the holders.
-outside a holder, and the scheduler knows none of them; it runs tasks, which `MainFrame`
-makes from the holders.
 
-### Lazy<T>: the holder
+### The holder: `Lazy<T>`
 
-Holds an object that a factory makes on first use, under a name for the log and a place
+A holder keeps one object and the factory that makes it. The rest of the app reads the
-in the idle queue, both given by the owner. The header has no wx dependency; the busy
+object if it exists, makes sure it exists now when about to show or navigate to it, or runs
-cursor for an on-demand build lives in `Lazy.cpp` and is skipped when there is no app,
+something once it exists. A type with one instance in the app gets these as statics
-so the holder is unit-tested.
+through `LazyInstance<T>`, so callers need no reference to the main window, and all of them
+are harmless while no holder exists.
 
-- `get()` is null until the object is completely built; `built()` says the same.
+The holder guarantees that callers see the object only once it is completely built. A
-- `ensure()` builds whatever is left now, under a busy cursor, and returns the object, or
+build cannot re-enter itself, so a nested request finds nothing yet, and a factory that
-  null in the two cases below. A click on an unbuilt tab or a first open of a dialog goes
+returns null or a unit that throws leaves the holder and the scheduler able to carry on.
-  through this, and it logs the units and time it took.
+The holder does not own the object; its wx parent does, as for any window. The holder has
-- `build_step()` runs one unit of construction and returns true while more remain. The
+no wx dependency and is unit-tested.
-  first unit is the factory call, and each later unit is one `StagedBuild` step if the
-  type has them.
-- `when_built(fn)` runs `fn(object)` now if it exists, otherwise once it is built.
-- `pending()` says whether the idle prebuild has work here: not built, and the factory
-  has not returned null. A null factory result is logged and the holder stays unbuilt.
-- A unit that pumps the event loop cannot re-enter the holder; a nested `build_step()`
-  does nothing and a nested `ensure()` returns null.
-- After a unit throws, the holder and the scheduler still run the next one.
 
-The holder does not own the object; its wx parent does, as for any window. A type with
+### The placeholder page: `LazyPage<Panel>`
-one instance in the app derives from `LazyInstance<T>`, which points at that instance's
-holder (the holder registers itself, and a recreated `MainFrame`'s holder replaces the
-old frame's) and gives the type the static entry points the rest of the app uses,
-`T::if_built()`, `T::ensure()` and `T::when_built(fn)`. They return null, or do
-nothing, while no holder exists, so a caller needs no `mainframe` check.
 
-`built()` is an atomic flag, since a job worker reads it through the statics
+The notebook needs a page object for a tab to exist and for tabs to be inserted and
-(`MainFrame::get_calibration_curr_tab()`); it is set after the object is complete.
+removed by pointer, and the placeholder is that object. It builds the real panel inside
+itself the first time it is shown and forwards showing and hiding afterwards, so a panel's
+own show handling stays its activation hook. Nothing builds while the main window is
+hidden; the window's first show builds the start page. A page that is out of the book is
+not prebuilt. A panel built while its page is hidden stays hidden, and gets the theming
+the window applied before the panel existed.
 
-`LazyBase` is the holder's type-free interface (`name()`, `built()`, `pending()`,
+### Staged construction: `StagedBuild`
-`build_step()`, `prebuild_order()`) and is what the scheduler side sees.
 
-### LazyPage<Panel>: the placeholder
+A constructor too big to be one unit builds a skeleton and queues the rest as steps, which
+run one per unit. A child panel's steps can be forwarded to its parent, and the parent is
+complete only once the child is. Nothing may use what a step builds before the last step
+has run, so staged panels follow these constraints:
 
-A `wxPanel` placed in the parent in place of the real panel, and a `Lazy<Panel>` whose
+- members created in steps start out null, so a partly built panel can be destroyed;
-factory makes the panel inside it (by default `new Panel(parent)`). The notebook needs a
+- timers, event handlers and destructors that touch step content check that the panel is
-page object for the tab to exist and for `show_device()` to insert and remove tabs by
+  complete first;
-pointer, and the placeholder is that object. `MainFrame` creates every page once, named
+- nothing takes focus while off screen, since a unit may run while the user is typing
-after its `TAB_ID_*`, and keeps it for the frame's life; `show_device()` only moves
-pages in and out of the book.
-
-- `Show()` is forwarded to the panel, so a panel's own `Show()` override stays its
-  activation hook (refresh timers, machine sync) and `SelectPageByName()` works
-  unchanged. A show builds the panel unless the frame itself is still hidden, because
-  the book selects its first page as it is inserted; `MainFrame::Show()` shows the
-  current page again when the frame becomes visible, which builds it.
-- `in_book()` says whether the parent notebook currently lists the page, and
-  `pending()` is that and not built, so a tab `show_device()` has taken out of the book
-  is not prebuilt.
-- A panel built while its page is hidden stays hidden, and a completed panel gets the
-  dark-mode pass the frame ran before it existed.
-
-The Compare presets dialog is a holder without a page. `MainFrame` keeps a
-`Lazy<DiffPresetDialog>` whose factory constructs the dialog and binds its events, the
-dialog derives from `LazyInstance`, and its callers use
-`DiffPresetDialog::ensure()->show()` and `DiffPresetDialog::if_built()` like a tab's
-callers do. Saving a preset refreshes the dialog only while it is shown, since `show()`
-reloads the presets.
-
-### StagedBuild: construction in units
-
-A mixin for a panel whose constructor is too big to be one unit. The constructor builds
-the skeleton (sizers, and the parts other code may touch) and queues the rest with
-`add_build_step()`. `build_step()` runs one step, and `add_build_steps_of(child)`
-forwards a child's steps so a nested panel is spread the same way; the parent is built
-only once the child is, including steps the child queues later. Steps run in order, on
-the main thread. A `Lazy<T>` recognises a staged type at compile time and runs its steps
-one per unit.
-
-Nothing may touch what a step builds before the last step has run. In practice:
-
-- nothing paints the panel before it is complete, since a panel built at idle is hidden
-  with its page and one built on demand finishes inside `ensure()` before the event loop
-  runs again;
-- members created in steps are initialised to null in the header, so a partially built
-  panel can be destroyed;
-- timers and event handlers that use step content check `built()` first
-  (`MonitorPanel::update_all()`, `CalibrationPanel::update_all()`), and a child's steps
-  are queued before anything in the constructor can fire such a handler;
-- a destructor that disconnects from step content checks `built()` first;
-- a constructor or step does not take focus while the panel is off screen
-  (`IsShownOnScreen()` before `SetFocus()`), since it may run while the user is typing
   elsewhere;
-- where a step's widgets must keep their place in a sizer that later steps also fill, the
+- a widget added by a step keeps its place in the sizer through an empty slot the skeleton
-  constructor adds an empty slot sizer in that position and the step fills the slot
+  creates.
-  (`StatusBasePanel`).
 
-### IdleScheduler: when to build
+### The scheduler: `IdleScheduler` and `PrebuildQueue`
 
-A task is any `LazyBase`: a name for the log, `pending()`, `build_step()` and
+The queue holds tasks in order, and a slice runs units of the first pending task until
-`prebuild_order()`. `PrebuildQueue` holds the tasks by order (equal order in the order
+the task finishes, the time budget is spent, or input arrives. It has no wx dependency and
-added) and runs a slice, the units of the first pending task until it completes, the
+is unit-tested with a fake clock. A task whose work goes away, such as a tab removed from
-budget is spent on the clock it is given, or the interrupt predicate says input arrived.
+the book, is skipped, and becomes pending again if the work comes back.
-It has no wx dependency and is unit-tested with a fake clock. A task whose work is gone
-is passed over and stays in the queue, so a tab that `show_device()` removes and later
-re-inserts is pending again.
 
-`IdleScheduler` drives the queue with the real clock, the app's input timestamp and the
+A slice runs only once the user has been idle for a short quiet time, and each slice is its
-Windows queue check, and logs each unit and slice. Each slice is a timer message: a
+own timer message, so paint, timers and input queued in between are handled before the
-period of 250 ms while waiting for the user to go quiet, and a one-shot of zero after a
+next slice. Posting slices as pending events would not do that, because wx drains every
-slice that left work, so the event loop dispatches whatever it has queued (paint,
+pending event before the next native message. On GTK a timer that is always due starves
-timers, input) before the next slice runs. Chaining slices with `CallAfter` would not do
+the lower-priority sources that repaint and deliver posted events, so slices are a few
-this: wx drains pending events fully before the next native message, on every platform.
+milliseconds apart. On Windows a slice also waits while the native queue holds input,
-On GTK the one-shot is 5 ms, because a due GLib timeout runs ahead of the redraw and
+not counting mouse moves, which Windows synthesizes whenever a window appears under the
-idle sources that paint and deliver posted events.
+cursor. A slice never runs inside a `wxYield()`, where it would build pages in the middle of
-A slice runs only once the user has been idle for the quiet time, and the timer stops
+the code that yielded. A unit cannot be interrupted, so the largest unit bounds how long a
-itself once no task is pending. The tick period, quiet time and slice length are
+click can wait.
-constants in `IdleScheduler.cpp`. A unit cannot be interrupted once started, so the
+When nothing is pending the timer stops and the subsystem costs nothing.
-largest unit bounds click latency on Windows; on the other platforms a click also waits
-for the rest of the slice. A unit that pumps the event loop lets the timer fire inside
-its own slice, and that tick does nothing.
 
-The tasks are made by their owners. `MainFrame::prebuild_pages_when_idle()` registers
+The main window owns the scheduler because it owns what the tasks build, and clearing the
-every `LazyPage` the frame created, in or out of the book (`pending()` is false for a
+queue with the window keeps a task from outliving its object. Each owner provides its own
-page out of the book), the Compare presets holder, and the Prepare sidebar's settings
+tasks, such as a tab, a dialog, the Prepare tab's settings page one option group at a
-page from `ParamsPanel::settings_page_prebuild()`, whose first unit selects the default
+time, the Prepare page's layout at the size the book gives its pages, or the 3D view's GL
-tab if none is selected yet and whose later units build one option group each.
+resources.
-`show_device()` only restarts the timer. `MainFrame` owns the scheduler because it owns
-everything the tasks build, and clearing the queue with the frame is what keeps a task
-from outliving its object.
 
-Idle time comes from `GUI_App::FilterEvent`, which timestamps mouse and keyboard events
+### The 3D view's GL resources
-(`wxEVT_CATEGORY_USER_INPUT` minus command events, which all claim that category), and
-`GUI_App::input_idle_ms()` reports it. On Windows a slice additionally refuses to start
-when the message queue holds keyboard, button, touch or pen input. Mouse moves are
-excluded because Windows synthesises one whenever a window appears under the cursor,
-which every unit does. Other platforms use the timestamp alone.
 
-Once every registered page is built the timer is stopped and the subsystem costs
+OpenGL is loaded on the Prepare tab's canvas. When the start page is not Prepare, loading
-nothing.
+it is an idle task that makes the context current on the hidden canvas, so the start page
+paints first and Prepare never appears. Loading it on a shown canvas under `Freeze()` holds
+back the start page's paint, and on GTK `Freeze()` cannot hide the canvas, which is a
+native child window or a Wayland subsurface drawn outside GTK. A hidden Windows child
+window keeps its device context, macOS attaches the context to a hidden view, and GTK
+creates the canvas's surface when the widget is realized, so on GTK the task realizes the
+canvas first. If the context cannot be made current, the canvas's first render loads the
+resources.
 
 ## Rules
 
-**What builds before the first frame.** The Prepare tab's plater, because `post_init()`
+**Before the first frame.** Only the start page and the Prepare tab's plater are built
-needs its GL canvas on screen to initialise OpenGL in every startup state, and the start
+before the first frame. Everything else goes through a holder.
-page the user configured. Home is built by the first `MainFrame::Show()`, Prepare's
-settings page by selecting the tab. `post_init()` passes through the Prepare tab for GL
-init under `Freeze()` with `MainFrame::select_prepare_for_gl_init()`, which changes the
-selection without the page-changed event, so nothing else is built for that pass.
 
-**Reaching a lazy object.** A caller uses the type's own statics. `T::if_built()` may
+**Reaching a lazy object.** Callers use the type's statics. Reading it if built is for
-return null and is for telling the object something it can live without (a rescale, a
+things the object can live without, such as a rescale, a color change or a status refresh.
-colour change, a status update). `T::ensure()` builds the object and is for navigating
+Making sure it exists is for navigating to it or showing it. Running something once it is
-to it or for a caller that is about to show it. A caller that tells the object something
+built is for state it would not fetch for itself on construction. A panel that pulls its
-it would not fetch for itself on construction uses `T::when_built()`, which keeps the
+state when constructed only ever needs to be read if built.
-message until the object exists. A panel that pulls its state when constructed (the Home
-page requests the recent list on load, the Device tab reads the device manager on show)
-is reached with `if_built()`; one that cannot pull gets `when_built()`.
 
-**Unit size.** A unit cannot be interrupted, so it should stay within the slice length on
+**Unit size.** A unit should fit in one slice on a fast machine. A constructor over that is
-a fast machine. A constructor above that is staged. A single widget above it is the
+staged, and a single widget over it is accepted unless the widget itself can be split.
-floor unless the widget itself is split.
 
-**Order.** Cheapest and most likely to be opened first, given where `MainFrame` creates
+**Order.** Tasks run cheapest and most likely to be opened first. Each holder's order is
-each holder. The settings page is 0 (the Prepare tab's own content), Home 10, Device 20
+given where it is created, with gaps so a new task fits between its neighbors. A negative
-(a Bambu user's usual second stop), Calibration 30, Multi-device 40, the web Device
+order is never prebuilt, for something few sessions open that costs more to build unasked
-view 50, Project 60 (a second WebView2 instance) and the Compare presets dialog 100;
+than it saves.
-steps of ten so a new tab takes a value between its neighbours without renumbering
-them. `MainFrame::prebuild_pages_when_idle()` registers the tasks once, from
-`post_init()`.
-
-**Never prebuilt.** A holder with a negative order, for a tab that few sessions open
-and that costs more to build unasked than it saves (the Design tab), and plugin-provided
-tabs, which are Python-side and not lazy pages.
 
 ## Adopting it
 
-A lazy tab needs:
+A lazy tab needs a panel type deriving from `LazyInstance`, a placeholder page the main
+window creates once with its order and registers for the idle build, and every use of the
+panel outside the main window going through the statics. Its constructor has to cope with
+the main window already existing and the user being busy elsewhere, so it takes no focus
+while off screen, and it does all of its own setup, since the main window does nothing to a
+panel after creating it.
 
-1. The panel derived from `LazyInstance<Panel>`, since a tab's panel has one instance.
+To stage a heavy constructor, keep the skeleton in the constructor, move the rest into
-2. A `LazyPage<Panel>*` member in `MainFrame`, created once in `init_tabpanel()` with
+steps in its original order, and follow the staged-construction constraints. Measure the
-   its `TAB_ID_*` as the name, its place by the order rule (and a factory if
+units; a step that is still one big widget is split inside the widget or accepted.
-   `new Panel(parent)` is not enough), added to `m_lazy_pages`, and used wherever the
-   tab is added to or looked up in the notebook.
-3. Every use of the panel outside `MainFrame` going through one of the panel's statics,
-   chosen by the rule above. When converting an existing member, `grep` for it; the
-   compiler finds the rest.
-4. A constructor that copes with the frame already existing and the user being busy
-   elsewhere, since `wxGetApp().mainframe` is set, the frame may be shown, and the user
-   may be typing when a lazy panel is built: no `SetFocus()` while off screen, and
-   whatever the constructor did through a `MainFrame` accessor before (a mode update, a
-   deferred URL) done in the constructor itself.
 
-To stage a heavy constructor, inherit `StagedBuild`, keep the skeleton in the constructor,
+## Verifying
-move the rest into `add_build_step()` lambdas in the original order, and follow the
-staged-panel rules above. Measure the units. A step that is still one big widget has to
-be split inside that widget or accepted as the floor.
 
-Verification is by log. `MainFrame::prebuild_pages_when_idle` lists the queue it
+The log lists the queue when it is registered, reports each completed task at info level
-registered, `IdleScheduler::tick` reports each completed task by name at info level and
+and each slice and unit at debug level, and reports every on-demand build with its units
-each slice and unit at debug level, and `Lazy::ensure` reports an object a user built
+and time. A task's completion line counts only the slice it finished in. A run from the
-on demand with the units and time it took. A run from the configured start
+configured start page should show every registered task complete in order, with no unit
-page shows every registered page complete, in order, with no unit longer than intended.
+longer than intended. A click on a tab during the idle build should show an on-demand
-A click on a tab mid-prebuild shows the finished panel with an `ensure` line for what was
+build for what was left, with the slices resuming once the user is idle again.
-left, and the slices resume for the remaining tasks once the user is idle again.

docs/HLSD/multiline-infill.md

@@ -0,0 +1,123 @@
+# Multiline infill — High Level Design
+
+## Purpose and scope
+
+`fill_multiline` prints every sparse infill wall as N adjacent lines instead of
+one, so a wall is `d1 = N * spacing` thick. Only internal sparse infill uses it.
+Each pattern first builds its single-line centerlines at N times the usual line
+spacing (so the density holds), and `multiline_fill()` then replaces each
+centerline by the lines of that wall: the centerline itself when N is odd, and
+closed outlines around it at every `spacing` out to `d1 / 2`. The outlines are
+clipped to the fill region contracted by half a line width, then connected like
+any other infill.
+
+Outlines of centerlines that cross each other overlap at every crossing, which
+over-extrudes the wall intersections. The line-crossing patterns Grid,
+Triangles, Tri-hexagon and Cubic therefore build centerlines that never cross
+(`FillRectilinear::fill_surface_trapezoidal()`), and so do Adaptive Cubic and
+Support Cubic (`FillAdaptive`); the other patterns outline their usual
+centerlines.
+
+## Non-crossing centerlines
+
+The crossing lines are resolved into x-monotone paths, the levels of the line
+arrangement: walking along x, the k-th path is always the k-th line from the
+bottom. At every crossing, the two paths bounce off each other instead of
+passing through. Adjacent paths meet only at crossings, so their outlines touch
+there and nowhere overlap.
+
+Where two paths meet, each is cut short by a line perpendicular to the bisector
+of its bend, `d1 / 2` from the crossing. The two cut segments are parallel and
+`d1` apart, so the outermost lines of the two walls sit exactly `spacing` apart,
+like the lines inside a wall. Where three lines meet at one point, the middle
+path runs straight through and the outer two are cut `d1` from it.
+
+Each pattern builds its rows along x in a rotated frame. Grid lines run at ±45°
+there, and its rows are trapezoid waves that transpose on alternate layers. The three families of Triangles, Tri-hexagon and
+Cubic run at 0°, 60° and 120°. Those rows rotate by 120° every layer about a
+3-fold center of the arrangement, so each family takes every role in turn.
+The pattern is phased on fixed positions, so it lines up across layers and
+across the regions of one layer. Rounding the corners with
+`sparse_infill_smooth_factor` happens before `multiline_fill()`.
+
+## Cubic
+
+Single-line Cubic draws the three families at the same spacing `h` and shifts
+them with z: by `+dx`, `-dx` and `+dx`, `dx = z / sqrt(2)`. The multiline paths
+follow the same lines. In the frame where one family is horizontal, the other two
+cross in rows `h` apart, alternating by half a period, at height
+`tau = -3 * dx (mod h)` above the horizontal line below them. The crossings split
+every band between horizontal lines into up-pointing triangles of height `tau`,
+down-pointing triangles of height `h - tau`, and hexagons. At `tau = 0` (and `h`)
+all three families meet at common points, as in Triangles. At `tau = h / 2` the
+triangles are equal, as in Tri-hexagon. The origin of that frame is always a
+3-fold center, whatever z is, so the per-layer rotation keeps the lines in place.
+
+Each band holds two paths that touch at its crossings: the upper one takes the
+V below the crossing and runs along the top horizontal line, and the lower one
+takes the inverted V above it and runs along the bottom line. Both are the same function
+of `tau`, the lower one mirrored with `h - tau`. `cubic_upper_level()` builds one
+period of the upper path as the lower envelope of five lines, clipped from below:
+
+- the two slanted lines through the crossings,
+- the horizontal line, lowered when the triangle above it is less than `1.5 * d1` high,
+- the two chamfers where the path turns onto and off the horizontal line, `d1 / 2`
+  from those crossings,
+- the flat cut into the V at the crossing.
+
+The cut height `clamp(tau - d1 / 2, 0, h - d1) + d1` is what makes the pattern
+continuous in z. While both triangles are at least `1.5 * d1` high, every
+crossing is a pair of bends `d1 / 2` from it, as in Tri-hexagon. When a triangle
+is thinner, its three paths stack like a triple crossing. The path through it
+flattens toward its base line and lies on it once the triangle is under `d1 / 2`
+high, and the paths beside it are pushed `d1` away. The layout thus reaches the
+Triangles one where the families meet. Adjacent paths stay at least `d1` apart
+at every `tau` and at every density up to 100%.
+
+## Adaptive Cubic
+
+Adaptive Cubic and Support Cubic take their lines from an octree of cubes
+standing on a corner. On each layer every cube cuts its three mid-planes into
+segments of the same three 60° families as Cubic, but the pattern is not
+periodic. Smaller cubes near the surface add finer lines, and a finer line ends
+where it meets the wall of its coarser cube, so the lines form crossings and
+T-junctions. `FillAdaptive::multiline_paths()` builds the paths from these
+segments directly, for each fill region and within `4 * d1` of it.
+
+At a crossing the two paths bounce as in Cubic. At a T-junction the through line
+runs straight on and the path of the ending line stops there. Every path still
+runs left to right in the frame where one family is horizontal, and that family
+rotates with the layer.
+
+Every line of every cube size lies on one fine lattice, so crossings closer than
+a few `d1` are the corners of one small triangle of that lattice, as in Cubic.
+The cuts follow the Cubic rules without a closed formula:
+
+- The two bends of a crossing are cut `d1` apart, `d1 / 2` each, perpendicular
+  to their bisector, so their walls touch. A cut goes no further than the path
+  end, and the other bend takes the rest of `d1`.
+- At the tip of a small triangle, between the two slanted families, a cut also
+  goes no further than the neighbouring bend turning the other way, and the
+  path beyond that bend is kept a wall away from it. The bends onto the
+  horizontal family are not limited this way: pushing their paths apart would
+  open gaps between walls that should touch.
+- A cut moves the path only where the cut line lies beyond it, near its bend.
+  The sharp bends between the two slanted families are cut after the bends onto
+  the horizontal family, so the tip of a small triangle wins, as in Cubic.
+- A path stopping at a T-junction is trimmed until it is `d1` less half a line
+  spacing from every other path, so that its end overlaps the wall it stops on
+  by half a line and bonds to it. The paths are trimmed one at a time against
+  the others as already trimmed, so two ends facing each other meet instead of
+  both backing off. A path stopping on the line of another is trimmed before
+  that one, so it gives way and the other still reaches the line it stops on. A
+  second round trims every path again from its full length, so an end grows
+  back where the ends it gave way to were trimmed later, and a last round only
+  shortens them, keeping them that far apart. Paths shorter than `d1` are left
+  out.
+- A line that ends on another less than `2 * d1` past a crossing stops at that
+  crossing instead, the shorter one where both do. The path along such a stub
+  would be trimmed away, leaving a hole between the walls that were cut to
+  touch it.
+
+Short paths enclosed by coarser lines still print as closed outlines, but most
+paths run on across several cells.

docs/HLSD/preset-cache.md

@@ -76,9 +76,10 @@ and the count of errors the original parse hit.
 
 Each entry is one preset **in source form**: what its JSON sub-file states and nothing
 that resolving it derives — the preset's own config diff, the name of the preset it
-inherits, and the parse metadata (name, sub-path, description, instantiation, setting
+inherits, the names of the presets it includes, and the parse metadata (name, sub-path,
-and filament ids, renames). Non-instantiated base presets are stored too; the children
+description, instantiation, setting and filament ids, renames). Non-instantiated base
-that inherit from them cannot resolve without them.
+presets are stored too; the children that inherit from or include them cannot resolve
+without them.
 
 **The payload names its own keys.** The dictionary holds the distinct `opt_key`s the
 file uses, the `ConfigOptionType` each was written as, and the distinct enum *value
@@ -161,9 +162,9 @@ cache nothing can invalidate is worse than no cache.
 
 Vendors load in a fixed order, because filament inheritance crosses exactly one
 boundary: any vendor's filament may inherit from the shared Orca filament library,
-and nothing else reaches across vendors. The library therefore goes first, alone;
+and nothing else reaches across vendors — an `include` is always vendor-local. The
-every other vendor follows in parallel, resolving against it; and the results are
+library therefore goes first, alone; every other vendor follows in parallel, resolving
-merged in a stable order:
+against it; and the results are merged in a stable order:
 
 ```mermaid
 flowchart LR
@@ -211,13 +212,16 @@ and its cache was never written back.
 
 Serving from a cache is not a memory-image restore. The entries are deserialized and
 then installed one by one — inheritance resolved against the presets installed before
-them and the currently loaded filament library, configs flattened onto the collection
+them and the currently loaded filament library, includes layered in, configs flattened
-defaults, validated and registered — by the same function the JSON path calls straight
+onto the collection defaults, validated and registered — by the same function the JSON
-after parsing a sub-file. The two paths share everything below the parse, which is what
+path calls straight after parsing a sub-file. An `include` layers what the included
-makes a cache-loaded bundle indistinguishable from a JSON-loaded one by construction
+base states, between the parent and the preset's own keys: the base's diff against the
-rather than by test coverage. Installation also rebuilds each preset's file path from
+default, taken when the base itself was installed and before the per-variant padding
-the local data directory, so a shipped cache never carries the generating machine's
+`inherits` sees, so only what a template sets reaches the presets including it. The two
-paths.
+paths share everything below the parse, which is what makes a cache-loaded bundle
+indistinguishable from a JSON-loaded one by construction rather than by test coverage.
+Installation also rebuilds each preset's file path from the local data directory, so a
+shipped cache never carries the generating machine's paths.
 
 App upgrades work because a cache normally survives one. Only a deliberate
 `CACHE_VERSION` bump makes an installed cache unreadable, and that is handled at

resources/profiles/BBL/filament/Bambu ABS @BBL A1 0.2 nozzle.json

@@ -1,41 +1,41 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL A1 0.2 nozzle",
+    "name": "Bambu ABS @BBL A1 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_08",
+    "setting_id": "GFSB00_08",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"20"
+        "20"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"2"
+        "2"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"18"
+        "18"
-	],
+    ],
-	"hot_plate_temp": [
+    "hot_plate_temp": [
-		"100"
+        "100"
-	],
+    ],
-	"hot_plate_temp_initial_layer": [
+    "hot_plate_temp_initial_layer": [
-		"100"
+        "100"
-	],
+    ],
-	"reduce_fan_stop_start_freq": [
+    "reduce_fan_stop_start_freq": [
-		"0"
+        "0"
-	],
+    ],
-	"slow_down_layer_time": [
+    "slow_down_layer_time": [
-		"12"
+        "12"
-	],
+    ],
-	"textured_plate_temp": [
+    "textured_plate_temp": [
-		"100"
+        "100"
-	],
+    ],
-	"textured_plate_temp_initial_layer": [
+    "textured_plate_temp_initial_layer": [
-		"100"
+        "100"
-	],
+    ],
-	"compatible_printers": [
+    "compatible_printers": [
-		"Bambu Lab A1 0.2 nozzle"
+        "Bambu Lab A1 0.2 nozzle"
-	]
+    ]
-}
+}

resources/profiles/BBL/filament/Bambu ABS @BBL A1.json

@@ -1,43 +1,46 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL A1",
+    "name": "Bambu ABS @BBL A1",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_07",
+    "setting_id": "GFSB00_07",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"20"
+        "20"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"16"
+        "16"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"18"
+        "18"
-	],
+    ],
-	"hot_plate_temp": [
+    "filament_retraction_length": [
-		"100"
+        "0.4"
-	],
+    ],
-	"hot_plate_temp_initial_layer": [
+    "hot_plate_temp": [
-		"100"
+        "100"
-	],
+    ],
-	"reduce_fan_stop_start_freq": [
+    "hot_plate_temp_initial_layer": [
-		"0"
+        "100"
-	],
+    ],
-	"slow_down_layer_time": [
+    "reduce_fan_stop_start_freq": [
-		"12"
+        "0"
-	],
+    ],
-	"textured_plate_temp": [
+    "slow_down_layer_time": [
-		"100"
+        "12"
-	],
+    ],
-	"textured_plate_temp_initial_layer": [
+    "textured_plate_temp": [
-		"100"
+        "100"
-	],
+    ],
-	"compatible_printers": [
+    "textured_plate_temp_initial_layer": [
-		"Bambu Lab A1 0.4 nozzle",
+        "100"
-		"Bambu Lab A1 0.6 nozzle",
+    ],
-		"Bambu Lab A1 0.8 nozzle"
+    "compatible_printers": [
-	]
+        "Bambu Lab A1 0.4 nozzle",
-}
+        "Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.8 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.2 nozzle.json

@@ -1,210 +1,113 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2C 0.2 nozzle",
+    "name": "Bambu ABS @BBL H2C 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_23",
+    "setting_id": "GFSB00_23",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"counter_coef_2": [
+    "counter_coef_2": [
-		"0.0124"
+        "0.0124"
-	],
+    ],
-	"counter_coef_3": [
+    "counter_coef_3": [
-		"0.0241"
+        "0.0241"
-	],
+    ],
-	"counter_limit_max": [
+    "counter_limit_max": [
-		"0.3341"
+        "0.3341"
-	],
+    ],
-	"counter_limit_min": [
+    "counter_limit_min": [
-		"0.0241"
+        "0.0241"
-	],
+    ],
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"fan_min_speed": [
+    "fan_min_speed": [
-		"40"
+        "40"
-	],
+    ],
-	"filament_change_length": [
+    "filament_change_length": [
-		"4"
+        "4"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "filament_cooling_before_tower": [
-		"10",
+        "10",
-		"10"
+        "10"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"2",
+        "2",
-		"2"
+        "2"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "filament_pre_cooling_temperature_nc": [
-		"230",
+        "230",
-		"230"
+        "230"
-	],
+    ],
-	"filament_prime_volume": [
+    "filament_prime_volume": [
-		"30"
+        "30"
-	],
+    ],
-	"filament_prime_volume_nc": [
+    "filament_prime_volume_nc": [
-		"30"
+        "30"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_ramming_travel_time_nc": [
+    "filament_ramming_travel_time_nc": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"first_x_layer_fan_speed": [
+    "first_x_layer_fan_speed": [
-		"0"
+        "0"
-	],
+    ],
-	"filament_change_length_nc": [
+    "filament_change_length_nc": [
-		"4"
+        "4"
-	],
+    ],
-	"hole_coef_2": [
+    "hole_coef_2": [
-		"-0.0008"
+        "-0.0008"
-	],
+    ],
-	"hole_coef_3": [
+    "hole_coef_3": [
-		"0.1319"
+        "0.1319"
-	],
+    ],
-	"hole_limit_max": [
+    "hole_limit_max": [
-		"0.1319"
+        "0.1319"
-	],
+    ],
-	"hole_limit_min": [
+    "hole_limit_min": [
-		"0.1119"
+        "0.1119"
-	],
+    ],
-	"filament_preheat_temperature_delta": [
+    "filament_preheat_temperature_delta": [
-		"20",
+        "20",
-		"20"
+        "20"
-	],
+    ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_deretraction_speed": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_extruder_variant": [
+        "260",
-		"Direct Drive Standard",
+        "260"
-		"Direct Drive High Flow"
+    ],
-	],
+    "overhang_fan_speed": [
-	"filament_flush_temp": [
+        "100"
-		"0",
+    ],
-		"0"
+    "slow_down_layer_time": [
-	],
+        "12"
-	"filament_flush_volumetric_speed": [
+    ],
-		"0",
+    "slow_down_min_speed": [
-		"0"
+        "20",
-	],
+        "20"
-	"filament_flow_ratio": [
+    ],
-		"0.95",
+    "temperature_vitrification": [
-		"0.95"
+        "75"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "compatible_printers": [
-		"nil",
+        "Bambu Lab H2C 0.2 nozzle"
-		"nil"
+    ],
-	],
+    "filament_start_gcode": [
-	"filament_pre_cooling_temperature": [
+        "; filament start gcode\n"
-		"0",
+    ],
-		"0"
+    "filament_end_gcode": [
-	],
+        "; filament end gcode \n"
-	"filament_retract_length_nc": [
+    ]
-		"14",
+}
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"75"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.6 nozzle.json

@@ -1,204 +1,141 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2C 0.6 nozzle",
+    "name": "Bambu ABS @BBL H2C 0.6 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_34",
+    "setting_id": "GFSB00_34",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"counter_coef_2": [
+    "counter_coef_2": [
-		"0.0124"
+        "0.0124"
-	],
+    ],
-	"counter_coef_3": [
+    "counter_coef_3": [
-		"0.0241"
+        "0.0241"
-	],
+    ],
-	"counter_limit_max": [
+    "counter_limit_min": [
-		"0.3341"
+        "0.0241"
-	],
+    ],
-	"counter_limit_min": [
+    "counter_limit_max": [
-		"0.0241"
+        "0.3341"
-	],
+    ],
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_change_length": [
+    "filament_cooling_before_tower": [
-		"4"
+        "10",
-	],
+        "10",
-	"filament_cooling_before_tower": [
+        "10"
-		"10",
+    ],
-		"10"
+    "filament_flow_ratio": [
-	],
+        "0.98",
-	"filament_flow_ratio": [
+        "0.98",
-		"0.98",
+        "0.98"
-		"0.98"
+    ],
-	],
+    "filament_max_volumetric_speed": [
-	"filament_max_volumetric_speed": [
+        "25",
-		"25",
+        "30",
-		"30"
+        "25"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "filament_retraction_length": [
-		"230",
+        "0.4",
-		"230"
+        "0.4",
-	],
+        "0.4"
-	"filament_prime_volume": [
+    ],
-		"30"
+    "filament_wipe": [
-	],
+        "1",
-	"filament_prime_volume_nc": [
+        "1",
-		"30"
+        "1"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_wipe_distance": [
-		"0",
+        "1",
-		"0"
+        "1",
-	],
+        "1"
-	"filament_ramming_travel_time_nc": [
+    ],
-		"1",
+    "filament_prime_volume": [
-		"1"
+        "30"
-	],
+    ],
-	"filament_retraction_length": [
+    "filament_prime_volume_nc": [
-		"0.4",
+        "30"
-		"0.4"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_wipe": [
+        "Spiral Lift",
-		"1",
+        "Spiral Lift",
-		"1"
+        "Spiral Lift"
-	],
+    ],
-	"filament_wipe_distance": [
+    "filament_pre_cooling_temperature_nc": [
-		"1",
+        "230",
-		"1"
+        "230",
-	],
+        "230"
-	"filament_z_hop_types": [
+    ],
-		"Spiral Lift",
+    "filament_ramming_travel_time": [
-		"Spiral Lift"
+        "0",
-	],
+        "0",
-	"first_x_layer_fan_speed": [
+        "0"
-		"0"
+    ],
-	],
+    "filament_ramming_travel_time_nc": [
-	"filament_change_length_nc": [
+        "1",
-		"4"
+        "1",
-	],
+        "1"
-	"hole_coef_2": [
+    ],
-		"-0.0008"
+    "filament_change_length": [
-	],
+        "4"
-	"hole_coef_3": [
+    ],
-		"0.1319"
+    "filament_change_length_nc": [
-	],
+        "4"
-	"hole_limit_max": [
+    ],
-		"0.1319"
+    "first_x_layer_fan_speed": [
-	],
+        "0"
-	"hole_limit_min": [
+    ],
-		"0.1119"
+    "hole_coef_2": [
-	],
+        "-0.0008"
-	"filament_preheat_temperature_delta": [
+    ],
-		"20",
+    "hole_coef_3": [
-		"20"
+        "0.1319"
-	],
+    ],
-	"filament_adaptive_volumetric_speed": [
+    "hole_limit_min": [
-		"0",
+        "0.1119"
-		"0"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_deretraction_speed": [
+        "0.1319"
-		"nil",
+    ],
-		"nil"
+    "filament_preheat_temperature_delta": [
-	],
+        "20",
-	"filament_extruder_variant": [
+        "20",
-		"Direct Drive Standard",
+        "20"
-		"Direct Drive High Flow"
+    ],
-	],
+    "include": [
-	"filament_flush_temp": [
+        "fdm_filament_template_direct_dual_e3d"
-		"0",
+    ],
-		"0"
+    "nozzle_temperature": [
-	],
+        "270",
-	"filament_flush_volumetric_speed": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_long_retractions_when_cut": [
+        "260",
-		"nil",
+        "260",
-		"nil"
+        "260"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "slow_down_layer_time": [
-		"0",
+        "12"
-		"0"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retract_length_nc": [
+        "20",
-		"14",
+        "20",
-		"14"
+        "20"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "temperature_vitrification": [
-		"-1",
+        "75"
-		"-1"
+    ],
-	],
+    "compatible_printers": [
-	"filament_ramming_volumetric_speed_nc": [
+        "Bambu Lab H2C 0.6 nozzle"
-		"-1",
+    ],
-		"-1"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"filament_retract_before_wipe": [
+    ],
-		"nil",
+    "filament_end_gcode": [
-		"nil"
+        "; filament end gcode \n"
-	],
+    ]
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"75"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.8 nozzle.json

@@ -1,204 +1,127 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2C 0.8 nozzle",
+    "name": "Bambu ABS @BBL H2C 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_35",
+    "setting_id": "GFSB00_35",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"counter_coef_2": [
+    "counter_coef_2": [
-		"0.0124"
+        "0.0124"
-	],
+    ],
-	"counter_coef_3": [
+    "counter_coef_3": [
-		"0.0241"
+        "0.0241"
-	],
+    ],
-	"counter_limit_max": [
+    "counter_limit_max": [
-		"0.3341"
+        "0.3341"
-	],
+    ],
-	"counter_limit_min": [
+    "counter_limit_min": [
-		"0.0241"
+        "0.0241"
-	],
+    ],
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_change_length": [
+    "filament_change_length": [
-		"4"
+        "4"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "filament_cooling_before_tower": [
-		"10",
+        "10",
-		"10"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_flow_ratio": [
-		"0.98",
+        "0.98",
-		"0.98"
+        "0.98"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"25",
+        "25",
-		"30"
+        "30"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "filament_pre_cooling_temperature_nc": [
-		"230",
+        "230",
-		"230"
+        "230"
-	],
+    ],
-	"filament_prime_volume": [
+    "filament_prime_volume": [
-		"30"
+        "30"
-	],
+    ],
-	"filament_prime_volume_nc": [
+    "filament_prime_volume_nc": [
-		"30"
+        "30"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_ramming_travel_time_nc": [
+    "filament_ramming_travel_time_nc": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_retraction_length": [
+    "filament_retraction_length": [
-		"0.4",
+        "0.4",
-		"0.4"
+        "0.4"
-	],
+    ],
-	"filament_wipe": [
+    "filament_wipe": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_wipe_distance": [
+    "filament_wipe_distance": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_z_hop_types": [
+    "filament_z_hop_types": [
-		"Spiral Lift",
+        "Spiral Lift",
-		"Spiral Lift"
+        "Spiral Lift"
-	],
+    ],
-	"first_x_layer_fan_speed": [
+    "first_x_layer_fan_speed": [
-		"0"
+        "0"
-	],
+    ],
-	"filament_change_length_nc": [
+    "filament_change_length_nc": [
-		"4"
+        "4"
-	],
+    ],
-	"hole_coef_2": [
+    "hole_coef_2": [
-		"-0.0008"
+        "-0.0008"
-	],
+    ],
-	"hole_coef_3": [
+    "hole_coef_3": [
-		"0.1319"
+        "0.1319"
-	],
+    ],
-	"hole_limit_max": [
+    "hole_limit_max": [
-		"0.1319"
+        "0.1319"
-	],
+    ],
-	"hole_limit_min": [
+    "hole_limit_min": [
-		"0.1119"
+        "0.1119"
-	],
+    ],
-	"filament_preheat_temperature_delta": [
+    "filament_preheat_temperature_delta": [
-		"20",
+        "20",
-		"20"
+        "20"
-	],
+    ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_deretraction_speed": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_extruder_variant": [
+        "260",
-		"Direct Drive Standard",
+        "260"
-		"Direct Drive High Flow"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_flush_temp": [
+        "12"
-		"0",
+    ],
-		"0"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_flush_volumetric_speed": [
+        "20"
-		"0",
+    ],
-		"0"
+    "temperature_vitrification": [
-	],
+        "75"
-	"filament_long_retractions_when_cut": [
+    ],
-		"nil",
+    "compatible_printers": [
-		"nil"
+        "Bambu Lab H2C 0.8 nozzle"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "filament_start_gcode": [
-		"0",
+        "; filament start gcode\n"
-		"0"
+    ],
-	],
+    "filament_end_gcode": [
-	"filament_retract_length_nc": [
+        "; filament end gcode \n"
-		"14",
+    ]
-		"14"
+}
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"75"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS @BBL H2C.json

@@ -1,204 +1,141 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2C",
+    "name": "Bambu ABS @BBL H2C",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_22",
+    "setting_id": "GFSB00_22",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"counter_coef_2": [
+    "counter_coef_2": [
-		"0.0124"
+        "0.0124"
-	],
+    ],
-	"counter_coef_3": [
+    "counter_coef_3": [
-		"0.0241"
+        "0.0241"
-	],
+    ],
-	"counter_limit_max": [
+    "counter_limit_min": [
-		"0.3341"
+        "0.0241"
-	],
+    ],
-	"counter_limit_min": [
+    "counter_limit_max": [
-		"0.0241"
+        "0.3341"
-	],
+    ],
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_change_length": [
+    "filament_cooling_before_tower": [
-		"4"
+        "10",
-	],
+        "10",
-	"filament_cooling_before_tower": [
+        "10"
-		"10",
+    ],
-		"10"
+    "filament_flow_ratio": [
-	],
+        "0.98",
-	"filament_flow_ratio": [
+        "0.98",
-		"0.98",
+        "0.98"
-		"0.98"
+    ],
-	],
+    "filament_max_volumetric_speed": [
-	"filament_max_volumetric_speed": [
+        "20",
-		"20",
+        "30",
-		"30"
+        "20"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "filament_retraction_length": [
-		"230",
+        "0.4",
-		"230"
+        "0.6",
-	],
+        "0.4"
-	"filament_prime_volume": [
+    ],
-		"30"
+    "filament_wipe": [
-	],
+        "1",
-	"filament_prime_volume_nc": [
+        "1",
-		"30"
+        "1"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_wipe_distance": [
-		"0",
+        "1",
-		"0"
+        "1",
-	],
+        "1"
-	"filament_ramming_travel_time_nc": [
+    ],
-		"1",
+    "filament_prime_volume": [
-		"1"
+        "30"
-	],
+    ],
-	"filament_retraction_length": [
+    "filament_prime_volume_nc": [
-		"0.4",
+        "30"
-		"0.6"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_wipe": [
+        "Spiral Lift",
-		"1",
+        "Spiral Lift",
-		"1"
+        "Spiral Lift"
-	],
+    ],
-	"filament_wipe_distance": [
+    "filament_pre_cooling_temperature_nc": [
-		"1",
+        "230",
-		"1"
+        "230",
-	],
+        "230"
-	"filament_z_hop_types": [
+    ],
-		"Spiral Lift",
+    "filament_ramming_travel_time": [
-		"Spiral Lift"
+        "0",
-	],
+        "0",
-	"first_x_layer_fan_speed": [
+        "0"
-		"0"
+    ],
-	],
+    "filament_ramming_travel_time_nc": [
-	"filament_change_length_nc": [
+        "1",
-		"4"
+        "1",
-	],
+        "1"
-	"hole_coef_2": [
+    ],
-		"-0.0008"
+    "filament_change_length": [
-	],
+        "4"
-	"hole_coef_3": [
+    ],
-		"0.1319"
+    "filament_change_length_nc": [
-	],
+        "4"
-	"hole_limit_max": [
+    ],
-		"0.1319"
+    "first_x_layer_fan_speed": [
-	],
+        "0"
-	"hole_limit_min": [
+    ],
-		"0.1119"
+    "hole_coef_2": [
-	],
+        "-0.0008"
-	"filament_preheat_temperature_delta": [
+    ],
-		"20",
+    "hole_coef_3": [
-		"20"
+        "0.1319"
-	],
+    ],
-	"filament_adaptive_volumetric_speed": [
+    "hole_limit_min": [
-		"0",
+        "0.1119"
-		"0"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_deretraction_speed": [
+        "0.1319"
-		"nil",
+    ],
-		"nil"
+    "filament_preheat_temperature_delta": [
-	],
+        "20",
-	"filament_extruder_variant": [
+        "20",
-		"Direct Drive Standard",
+        "20"
-		"Direct Drive High Flow"
+    ],
-	],
+    "include": [
-	"filament_flush_temp": [
+        "fdm_filament_template_direct_dual_e3d"
-		"0",
+    ],
-		"0"
+    "nozzle_temperature": [
-	],
+        "270",
-	"filament_flush_volumetric_speed": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_long_retractions_when_cut": [
+        "260",
-		"nil",
+        "260",
-		"nil"
+        "260"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "slow_down_layer_time": [
-		"0",
+        "12"
-		"0"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retract_length_nc": [
+        "20",
-		"14",
+        "20",
-		"14"
+        "20"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "temperature_vitrification": [
-		"-1",
+        "75"
-		"-1"
+    ],
-	],
+    "compatible_printers": [
-	"filament_ramming_volumetric_speed_nc": [
+        "Bambu Lab H2C 0.4 nozzle"
-		"-1",
+    ],
-		"-1"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"filament_retract_before_wipe": [
+    ],
-		"nil",
+    "filament_end_gcode": [
-		"nil"
+        "; filament end gcode \n"
-	],
+    ]
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"75"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.2 nozzle.json

@@ -1,134 +1,83 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2D 0.2 nozzle",
+    "name": "Bambu ABS @BBL H2D 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_12",
+    "setting_id": "GFSB00_12",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_2": [
-		"60"
+        "0.0124"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_3": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_max": [
-	"filament_flow_ratio": [
+        "0.3341"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_min": [
-	],
+        "0.0241"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_max_speed": [
-		"0"
+        "60"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"0",
+        "10",
-		"0"
+        "10"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_max_volumetric_speed": [
-		"nil",
+        "2",
-		"nil"
+        "2"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"2",
+        "0",
-		"2"
+        "0"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_prime_volume": [
-		"-1",
+        "30"
-		"-1"
+    ],
-	],
+    "filament_change_length": [
-	"filament_retract_before_wipe": [
+        "4"
-		"nil",
+    ],
-		"nil"
+    "hole_coef_2": [
-	],
+        "-0.0008"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "hole_coef_3": [
-		"nil"
+        "0.1319"
-	],
+    ],
-	"filament_retract_when_changing_layer": [
+    "hole_limit_max": [
-		"nil",
+        "0.1319"
-		"nil"
+    ],
-	],
+    "hole_limit_min": [
-	"filament_retraction_distances_when_cut": [
+        "0.1119"
-		"nil",
+    ],
-		"nil"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual"
-	"filament_retraction_length": [
+    ],
-		"nil",
+    "nozzle_temperature": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "nozzle_temperature_initial_layer": [
-		"nil"
+        "260",
-	],
+        "260"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "slow_down_layer_time": [
-		"nil"
+        "12"
-	],
+    ],
-	"filament_wipe": [
+    "slow_down_min_speed": [
-		"nil",
+        "20",
-		"nil"
+        "20"
-	],
+    ],
-	"filament_wipe_distance": [
+    "compatible_printers": [
-		"nil",
+        "Bambu Lab H2D 0.2 nozzle"
-		"nil"
+    ],
-	],
+    "filament_start_gcode": [
-	"filament_z_hop": [
+        "; filament start gcode\n"
-		"nil",
+    ],
-		"nil"
+    "filament_end_gcode": [
-	],
+        "; filament end gcode \n"
-	"filament_z_hop_types": [
+    ]
-		"nil",
+}
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.6 nozzle.json

@@ -1,138 +1,109 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2D 0.6 nozzle",
+    "name": "Bambu ABS @BBL H2D 0.6 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_29",
+    "setting_id": "GFSB00_29",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_2": [
-		"60"
+        "0.0124"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_3": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_max": [
-	"filament_flow_ratio": [
+        "0.3341"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_min": [
-	],
+        "0.0241"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_max_speed": [
-		"0"
+        "60"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_change_length": [
-		"0",
+        "4"
-		"0"
+    ],
-	],
+    "filament_cooling_before_tower": [
-	"filament_long_retractions_when_cut": [
+        "10",
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"25",
+        "25",
-		"35"
+        "35",
-	],
+        "25"
-	"filament_ramming_volumetric_speed": [
+    ],
-		"-1",
+    "filament_prime_volume": [
-		"-1"
+        "30"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "filament_retraction_length": [
-		"nil"
+        "0.4",
-	],
+        "0.4",
-	"filament_retract_when_changing_layer": [
+        "0.4"
-		"nil",
+    ],
-		"nil"
+    "filament_wipe": [
-	],
+        "1",
-	"filament_retraction_distances_when_cut": [
+        "1",
-		"nil",
+        "1"
-		"nil"
+    ],
-	],
+    "filament_wipe_distance": [
-	"filament_retraction_length": [
+        "1",
-		"0.4",
+        "1",
-		"0.4"
+        "1"
-	],
+    ],
-	"filament_retraction_minimum_travel": [
+    "filament_z_hop_types": [
-		"nil",
+        "Spiral Lift",
-		"nil"
+        "Spiral Lift",
-	],
+        "Spiral Lift"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "hole_coef_2": [
-		"nil"
+        "-0.0008"
-	],
+    ],
-	"filament_wipe": [
+    "hole_coef_3": [
-		"1",
+        "0.1319"
-		"1"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_wipe_distance": [
+        "0.1319"
-		"1",
+    ],
-		"1"
+    "hole_limit_min": [
-	],
+        "0.1119"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "include": [
-		"nil"
+        "fdm_filament_template_direct_dual_e3d"
-	],
+    ],
-	"filament_z_hop_types": [
+    "nozzle_temperature": [
-		"Spiral Lift",
+        "270",
-		"Spiral Lift"
+        "270",
-	],
+        "270"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "nozzle_temperature_initial_layer": [
-		"Direct Drive High Flow"
+        "260",
-	],
+        "260",
-	"filament_pre_cooling_temperature": [
+        "260"
-		"0",
+    ],
-		"0"
+    "slow_down_layer_time": [
-	],
+        "12"
-	"filament_ramming_travel_time": [
+    ],
-		"0",
+    "slow_down_min_speed": [
-		"0"
+        "20",
-	],
+        "20",
-	"filament_adaptive_volumetric_speed": [
+        "20"
-		"0",
+    ],
-		"0"
+    "compatible_printers": [
-	],
+        "Bambu Lab H2D 0.6 nozzle"
-	"filament_extruder_id": [
+    ],
-		"1",
+    "filament_start_gcode": [
-		"1"
+        "; filament start gcode\n"
-	],
+    ],
-	"long_retractions_when_ec": [
+    "filament_end_gcode": [
-		"1",
+        "; filament end gcode \n"
-		"1"
+    ]
-	],
+}
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.8 nozzle.json

@@ -1,134 +1,99 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2D 0.8 nozzle",
+    "name": "Bambu ABS @BBL H2D 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_13",
+    "setting_id": "GFSB00_13",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_2": [
-		"60"
+        "0.0124"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_3": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_max": [
-	"filament_flow_ratio": [
+        "0.3341"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_min": [
-	],
+        "0.0241"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_max_speed": [
-		"0"
+        "60"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"0",
+        "10",
-		"0"
+        "10"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_max_volumetric_speed": [
-		"nil",
+        "25",
-		"nil"
+        "35"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_retraction_length": [
-		"25",
+        "0.4",
-		"35"
+        "0.4"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_wipe": [
-		"-1",
+        "1",
-		"-1"
+        "1"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_wipe_distance": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_retract_restart_extra": [
+    "filament_z_hop_types": [
-		"nil",
+        "Spiral Lift",
-		"nil"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retract_when_changing_layer": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_prime_volume": [
-		"nil",
+        "30"
-		"nil"
+    ],
-	],
+    "filament_change_length": [
-	"filament_retraction_length": [
+        "4"
-		"0.4",
+    ],
-		"0.4"
+    "hole_coef_2": [
-	],
+        "-0.0008"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "hole_coef_3": [
-		"nil"
+        "0.1319"
-	],
+    ],
-	"filament_retraction_speed": [
+    "hole_limit_max": [
-		"nil",
+        "0.1319"
-		"nil"
+    ],
-	],
+    "hole_limit_min": [
-	"filament_wipe": [
+        "0.1119"
-		"1",
+    ],
-		"1"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual"
-	"filament_wipe_distance": [
+    ],
-		"1",
+    "nozzle_temperature": [
-		"1"
+        "260",
-	],
+        "260"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "nozzle_temperature_initial_layer": [
-		"nil"
+        "260",
-	],
+        "260"
-	"filament_z_hop_types": [
+    ],
-		"Spiral Lift",
+    "slow_down_layer_time": [
-		"Spiral Lift"
+        "12"
-	],
+    ],
-	"filament_extruder_variant": [
+    "slow_down_min_speed": [
-		"Direct Drive Standard",
+        "20",
-		"Direct Drive High Flow"
+        "20"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "compatible_printers": [
-		"0",
+        "Bambu Lab H2D 0.8 nozzle"
-		"0"
+    ],
-	],
+    "filament_start_gcode": [
-	"filament_ramming_travel_time": [
+        "; filament start gcode\n"
-		"0",
+    ],
-		"0"
+    "filament_end_gcode": [
-	],
+        "; filament end gcode \n"
-	"filament_adaptive_volumetric_speed": [
+    ]
-		"0",
+}
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS @BBL H2D.json

@@ -1,134 +1,109 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2D",
+    "name": "Bambu ABS @BBL H2D",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_11",
+    "setting_id": "GFSB00_11",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_2": [
-		"60"
+        "0.0124"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_3": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_max": [
-	"filament_flow_ratio": [
+        "0.3341"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_min": [
-	],
+        "0.0241"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_max_speed": [
-		"0"
+        "60"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_change_length": [
-		"0",
+        "4"
-		"0"
+    ],
-	],
+    "filament_cooling_before_tower": [
-	"filament_long_retractions_when_cut": [
+        "10",
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"20",
+        "20",
-		"35"
+        "35",
-	],
+        "20"
-	"filament_ramming_volumetric_speed": [
+    ],
-		"-1",
+    "filament_prime_volume": [
-		"-1"
+        "30"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "filament_retraction_length": [
-		"nil"
+        "0.4",
-	],
+        "0.4",
-	"filament_retract_when_changing_layer": [
+        "0.4"
-		"nil",
+    ],
-		"nil"
+    "filament_wipe": [
-	],
+        "1",
-	"filament_retraction_distances_when_cut": [
+        "1",
-		"nil",
+        "1"
-		"nil"
+    ],
-	],
+    "filament_wipe_distance": [
-	"filament_retraction_length": [
+        "1",
-		"0.4",
+        "1",
-		"0.4"
+        "1"
-	],
+    ],
-	"filament_retraction_minimum_travel": [
+    "filament_z_hop_types": [
-		"nil",
+        "Spiral Lift",
-		"nil"
+        "Spiral Lift",
-	],
+        "Spiral Lift"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "hole_coef_2": [
-		"nil"
+        "-0.0008"
-	],
+    ],
-	"filament_wipe": [
+    "hole_coef_3": [
-		"1",
+        "0.1319"
-		"1"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_wipe_distance": [
+        "0.1319"
-		"1",
+    ],
-		"1"
+    "hole_limit_min": [
-	],
+        "0.1119"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "include": [
-		"nil"
+        "fdm_filament_template_direct_dual_e3d"
-	],
+    ],
-	"filament_z_hop_types": [
+    "nozzle_temperature": [
-		"Spiral Lift",
+        "270",
-		"Spiral Lift"
+        "270",
-	],
+        "270"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "nozzle_temperature_initial_layer": [
-		"Direct Drive High Flow"
+        "260",
-	],
+        "260",
-	"filament_pre_cooling_temperature": [
+        "260"
-		"0",
+    ],
-		"0"
+    "slow_down_layer_time": [
-	],
+        "12"
-	"filament_ramming_travel_time": [
+    ],
-		"0",
+    "slow_down_min_speed": [
-		"0"
+        "20",
-	],
+        "20",
-	"filament_adaptive_volumetric_speed": [
+        "20"
-		"0",
+    ],
-		"0"
+    "compatible_printers": [
-	],
+        "Bambu Lab H2D 0.4 nozzle"
-	"long_retractions_when_ec": [
+    ],
-		"1",
+    "filament_start_gcode": [
-		"1"
+        "; filament start gcode\n"
-	],
+    ],
-	"nozzle_temperature": [
+    "filament_end_gcode": [
-		"270",
+        "; filament end gcode \n"
-		"270"
+    ]
-	],
+}
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.2 nozzle.json

@@ -1,134 +1,53 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2DP 0.2 nozzle",
+    "name": "Bambu ABS @BBL H2DP 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_17",
+    "setting_id": "GFSB00_17",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "2",
-		"0.95"
+        "2"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_long_retractions_when_cut": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_max_volumetric_speed": [
+        "260",
-		"2",
+        "260"
-		"2"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_ramming_volumetric_speed": [
+        "12"
-		"-1",
+    ],
-		"-1"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_retract_before_wipe": [
+        "20"
-		"nil",
+    ],
-		"nil"
+    "compatible_printers": [
-	],
+        "Bambu Lab H2D Pro 0.2 nozzle"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil"
+        "; filament start gcode\n"
-	],
+    ],
-	"filament_retract_when_changing_layer": [
+    "filament_end_gcode": [
-		"nil",
+        "; filament end gcode \n"
-		"nil"
+    ]
-	],
+}
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.6 nozzle.json

@@ -1,134 +1,69 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2DP 0.6 nozzle",
+    "name": "Bambu ABS @BBL H2DP 0.6 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_31",
+    "setting_id": "GFSB00_31",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "25",
-		"0.95"
+        "35"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_retraction_length": [
-		"0",
+        "0.4",
-		"0"
+        "0.4"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_wipe": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_wipe_distance": [
-		"25",
+        "1",
-		"35"
+        "1"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_z_hop_types": [
-		"-1",
+        "Spiral Lift",
-		"-1"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retract_restart_extra": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_when_changing_layer": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_retraction_distances_when_cut": [
+        "12"
-		"nil",
+    ],
-		"nil"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_retraction_length": [
+        "20"
-		"0.4",
+    ],
-		"0.4"
+    "compatible_printers": [
-	],
+        "Bambu Lab H2D Pro 0.6 nozzle"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil"
+        "; filament start gcode\n"
-	],
+    ],
-	"filament_retraction_speed": [
+    "filament_end_gcode": [
-		"nil",
+        "; filament end gcode \n"
-		"nil"
+    ]
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.8 nozzle.json

@@ -1,134 +1,69 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2DP 0.8 nozzle",
+    "name": "Bambu ABS @BBL H2DP 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_18",
+    "setting_id": "GFSB00_18",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "25",
-		"0.95"
+        "35"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_retraction_length": [
-		"0",
+        "0.4",
-		"0"
+        "0.4"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_wipe": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_wipe_distance": [
-		"25",
+        "1",
-		"35"
+        "1"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_z_hop_types": [
-		"-1",
+        "Spiral Lift",
-		"-1"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retract_restart_extra": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_when_changing_layer": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_retraction_distances_when_cut": [
+        "12"
-		"nil",
+    ],
-		"nil"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_retraction_length": [
+        "20"
-		"0.4",
+    ],
-		"0.4"
+    "compatible_printers": [
-	],
+        "Bambu Lab H2D Pro 0.8 nozzle"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil"
+        "; filament start gcode\n"
-	],
+    ],
-	"filament_retraction_speed": [
+    "filament_end_gcode": [
-		"nil",
+        "; filament end gcode \n"
-		"nil"
+    ]
-	],
+}
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS @BBL H2DP.json

@@ -1,134 +1,69 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2DP",
+    "name": "Bambu ABS @BBL H2DP",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_16",
+    "setting_id": "GFSB00_16",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "20",
-		"0.95"
+        "30"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_retraction_length": [
-		"0",
+        "0.4",
-		"0"
+        "0.4"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_wipe": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_wipe_distance": [
-		"20",
+        "1",
-		"30"
+        "1"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_z_hop_types": [
-		"-1",
+        "Spiral Lift",
-		"-1"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retract_restart_extra": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_when_changing_layer": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_retraction_distances_when_cut": [
+        "12"
-		"nil",
+    ],
-		"nil"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_retraction_length": [
+        "20"
-		"0.4",
+    ],
-		"0.4"
+    "compatible_printers": [
-	],
+        "Bambu Lab H2D Pro 0.4 nozzle"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil"
+        "; filament start gcode\n"
-	],
+    ],
-	"filament_retraction_speed": [
+    "filament_end_gcode": [
-		"nil",
+        "; filament end gcode \n"
-		"nil"
+    ]
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.2 nozzle.json

@@ -1,143 +1,104 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2S 0.2 nozzle",
+    "name": "Bambu ABS @BBL H2S 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_25",
+    "setting_id": "GFSB00_25",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_2": [
-		"60"
+        "0.0124"
-	],
+    ],
-	"fan_min_speed": [
+    "counter_coef_3": [
-		"40"
+        "0.0241"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_max": [
-	"filament_flow_ratio": [
+        "0.3341"
-		"0.95",
+    ],
-		"0.95"
+    "fan_max_speed": [
-	],
+        "60"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_min_speed": [
-		"0"
+        "40"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"3",
+        "10",
-		"3"
+        "10"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_flush_volumetric_speed": [
-		"nil",
+        "3",
-		"nil"
+        "3"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"2",
+        "2",
-		"2"
+        "2"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_prime_volume": [
-		"-1",
+        "30"
-		"-1"
+    ],
-	],
+    "filament_ramming_travel_time": [
-	"filament_retract_before_wipe": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "filament_change_length": [
-	"filament_retract_restart_extra": [
+        "4"
-		"nil",
+    ],
-		"nil"
+    "hole_coef_2": [
-	],
+        "-0.0008"
-	"filament_retract_when_changing_layer": [
+    ],
-		"nil",
+    "hole_coef_3": [
-		"nil"
+        "0.1319"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "hole_limit_min": [
-		"nil",
+        "0.1119"
-		"nil"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_retraction_length": [
+        "0.1319"
-		"nil",
+    ],
-		"nil"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "long_retractions_when_ec": [
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "nozzle_temperature": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_wipe": [
+    ],
-		"nil",
+    "nozzle_temperature_initial_layer": [
-		"nil"
+        "260",
-	],
+        "260"
-	"filament_wipe_distance": [
+    ],
-		"nil",
+    "overhang_fan_speed": [
-		"nil"
+        "100"
-	],
+    ],
-	"filament_z_hop": [
+    "pre_start_fan_time": [
-		"nil",
+        "2"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_z_hop_types": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_extruder_variant": [
+        "12"
-		"Direct Drive Standard",
+    ],
-		"Direct Drive High Flow"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_pre_cooling_temperature": [
+        "20"
-		"0",
+    ],
-		"0"
+    "compatible_printers": [
-	],
+        "Bambu Lab H2S 0.2 nozzle"
-	"filament_ramming_travel_time": [
+    ],
-		"0",
+    "filament_start_gcode": [
-		"0"
+        "; filament start gcode\n"
-	],
+    ],
-	"filament_adaptive_volumetric_speed": [
+    "filament_end_gcode": [
-		"0",
+        "; filament end gcode \n"
-		"0"
+    ]
-	],
+}
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.6 nozzle.json

@@ -1,140 +1,125 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2S 0.6 nozzle",
+    "name": "Bambu ABS @BBL H2S 0.6 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_33",
+    "setting_id": "GFSB00_33",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_2": [
-		"60"
+        "0.0124"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_3": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_min": [
-	"filament_flow_ratio": [
+        "0.0241"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_max": [
-	],
+        "0.3341"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_max_speed": [
-		"0"
+        "60"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_change_length": [
-		"0",
+        "4"
-		"0"
+    ],
-	],
+    "filament_cooling_before_tower": [
-	"filament_long_retractions_when_cut": [
+        "10",
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"25",
+        "25",
-		"35"
+        "35",
-	],
+        "25"
-	"filament_ramming_volumetric_speed": [
+    ],
-		"-1",
+    "filament_prime_volume": [
-		"-1"
+        "30"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_retraction_length": [
-		"nil",
+        "0.4",
-		"nil"
+        "0.4",
-	],
+        "0.4"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "filament_wipe": [
-		"nil"
+        "1",
-	],
+        "1",
-	"filament_retract_when_changing_layer": [
+        "1"
-		"nil",
+    ],
-		"nil"
+    "filament_wipe_distance": [
-	],
+        "1",
-	"filament_retraction_distances_when_cut": [
+        "1",
-		"nil",
+        "1"
-		"nil"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_retraction_length": [
+        "Spiral Lift",
-		"0.4",
+        "Spiral Lift",
-		"0.4"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retraction_minimum_travel": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "hole_coef_2": [
-		"nil"
+        "-0.0008"
-	],
+    ],
-	"filament_wipe": [
+    "hole_coef_3": [
-		"1",
+        "0.1319"
-		"1"
+    ],
-	],
+    "hole_limit_min": [
-	"filament_wipe_distance": [
+        "0.1119"
-		"1",
+    ],
-		"1"
+    "hole_limit_max": [
-	],
+        "0.1319"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "include": [
-		"nil"
+        "fdm_filament_template_direct_dual_e3d"
-	],
+    ],
-	"filament_z_hop_types": [
+    "long_retractions_when_ec": [
-		"Spiral Lift",
+        "0",
-		"Spiral Lift"
+        "0",
-	],
+        "0"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "nozzle_temperature": [
-		"Direct Drive High Flow"
+        "270",
-	],
+        "270",
-	"filament_pre_cooling_temperature": [
+        "270"
-		"0",
+    ],
-		"0"
+    "nozzle_temperature_initial_layer": [
-	],
+        "260",
-	"filament_ramming_travel_time": [
+        "260",
-		"0",
+        "260"
-		"0"
+    ],
-	],
+    "overhang_fan_speed": [
-	"filament_adaptive_volumetric_speed": [
+        "100"
-		"0",
+    ],
-		"0"
+    "pre_start_fan_time": [
-	],
+        "2"
-	"long_retractions_when_ec": [
+    ],
-		"0",
+    "retraction_distances_when_ec": [
-		"0"
+        "0",
-	],
+        "0",
-	"nozzle_temperature": [
+        "0"
-		"270",
+    ],
-		"270"
+    "slow_down_layer_time": [
-	],
+        "12"
-	"nozzle_temperature_initial_layer": [
+    ],
-		"260",
+    "slow_down_min_speed": [
-		"260"
+        "20",
-	],
+        "20",
-	"overhang_fan_speed": [
+        "20"
-		"100"
+    ],
-	],
+    "compatible_printers": [
-	"pre_start_fan_time": [
+        "Bambu Lab H2S 0.6 nozzle"
-		"2"
+    ],
-	],
+    "filament_start_gcode": [
-	"retraction_distances_when_ec": [
+        "; filament start gcode\n"
-		"0",
+    ],
-		"0"
+    "filament_end_gcode": [
-	],
+        "; filament end gcode \n"
-	"slow_down_layer_time": [
+    ]
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.8 nozzle.json

@@ -1,140 +1,113 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2S 0.8 nozzle",
+    "name": "Bambu ABS @BBL H2S 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_32",
+    "setting_id": "GFSB00_32",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_2": [
-		"60"
+        "0.0124"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_3": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_min": [
-	"filament_flow_ratio": [
+        "0.0241"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_max": [
-	],
+        "0.3341"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_max_speed": [
-		"0"
+        "60"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"0",
+        "10",
-		"0"
+        "10"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_max_volumetric_speed": [
-		"nil",
+        "25",
-		"nil"
+        "35"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_retraction_length": [
-		"25",
+        "0.4",
-		"35"
+        "0.4"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_wipe": [
-		"-1",
+        "1",
-		"-1"
+        "1"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_wipe_distance": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_retract_restart_extra": [
+    "filament_prime_volume": [
-		"nil",
+        "30"
-		"nil"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_retract_when_changing_layer": [
+        "Spiral Lift",
-		"nil",
+        "Spiral Lift"
-		"nil"
+    ],
-	],
+    "filament_ramming_travel_time": [
-	"filament_retraction_distances_when_cut": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "filament_change_length": [
-	"filament_retraction_length": [
+        "4"
-		"0.4",
+    ],
-		"0.4"
+    "hole_coef_2": [
-	],
+        "-0.0008"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "hole_coef_3": [
-		"nil"
+        "0.1319"
-	],
+    ],
-	"filament_retraction_speed": [
+    "hole_limit_min": [
-		"nil",
+        "0.1119"
-		"nil"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_wipe": [
+        "0.1319"
-		"1",
+    ],
-		"1"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual"
-	"filament_wipe_distance": [
+    ],
-		"1",
+    "long_retractions_when_ec": [
-		"1"
+        "0",
-	],
+        "0"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "nozzle_temperature": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_z_hop_types": [
+    ],
-		"Spiral Lift",
+    "nozzle_temperature_initial_layer": [
-		"Spiral Lift"
+        "260",
-	],
+        "260"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "overhang_fan_speed": [
-		"Direct Drive High Flow"
+        "100"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "pre_start_fan_time": [
-		"0",
+        "2"
-		"0"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_ramming_travel_time": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_adaptive_volumetric_speed": [
+        "12"
-		"0",
+    ],
-		"0"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"long_retractions_when_ec": [
+        "20"
-		"0",
+    ],
-		"0"
+    "compatible_printers": [
-	],
+        "Bambu Lab H2S 0.8 nozzle"
-	"nozzle_temperature": [
+    ],
-		"270",
+    "filament_start_gcode": [
-		"270"
+        "; filament start gcode\n"
-	],
+    ],
-	"nozzle_temperature_initial_layer": [
+    "filament_end_gcode": [
-		"260",
+        "; filament end gcode \n"
-		"260"
+    ]
-	],
+}
-	"overhang_fan_speed": [
-		"100"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS @BBL H2S.json

@@ -1,140 +1,125 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2S",
+    "name": "Bambu ABS @BBL H2S",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_24",
+    "setting_id": "GFSB00_24",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_2": [
-		"60"
+        "0.0124"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_3": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_min": [
-	"filament_flow_ratio": [
+        "0.0241"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_max": [
-	],
+        "0.3341"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_max_speed": [
-		"0"
+        "60"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_change_length": [
-		"0",
+        "4"
-		"0"
+    ],
-	],
+    "filament_cooling_before_tower": [
-	"filament_long_retractions_when_cut": [
+        "10",
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"20",
+        "20",
-		"35"
+        "35",
-	],
+        "20"
-	"filament_ramming_volumetric_speed": [
+    ],
-		"-1",
+    "filament_prime_volume": [
-		"-1"
+        "30"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_retraction_length": [
-		"nil",
+        "0.4",
-		"nil"
+        "0.4",
-	],
+        "0.4"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "filament_wipe": [
-		"nil"
+        "1",
-	],
+        "1",
-	"filament_retract_when_changing_layer": [
+        "1"
-		"nil",
+    ],
-		"nil"
+    "filament_wipe_distance": [
-	],
+        "1",
-	"filament_retraction_distances_when_cut": [
+        "1",
-		"nil",
+        "1"
-		"nil"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_retraction_length": [
+        "Spiral Lift",
-		"0.4",
+        "Spiral Lift",
-		"0.4"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retraction_minimum_travel": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "hole_coef_2": [
-		"nil"
+        "-0.0008"
-	],
+    ],
-	"filament_wipe": [
+    "hole_coef_3": [
-		"1",
+        "0.1319"
-		"1"
+    ],
-	],
+    "hole_limit_min": [
-	"filament_wipe_distance": [
+        "0.1119"
-		"1",
+    ],
-		"1"
+    "hole_limit_max": [
-	],
+        "0.1319"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "include": [
-		"nil"
+        "fdm_filament_template_direct_dual_e3d"
-	],
+    ],
-	"filament_z_hop_types": [
+    "long_retractions_when_ec": [
-		"Spiral Lift",
+        "0",
-		"Spiral Lift"
+        "0",
-	],
+        "0"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "nozzle_temperature": [
-		"Direct Drive High Flow"
+        "270",
-	],
+        "270",
-	"filament_pre_cooling_temperature": [
+        "270"
-		"0",
+    ],
-		"0"
+    "nozzle_temperature_initial_layer": [
-	],
+        "260",
-	"filament_ramming_travel_time": [
+        "260",
-		"0",
+        "260"
-		"0"
+    ],
-	],
+    "overhang_fan_speed": [
-	"filament_adaptive_volumetric_speed": [
+        "100"
-		"0",
+    ],
-		"0"
+    "pre_start_fan_time": [
-	],
+        "2"
-	"long_retractions_when_ec": [
+    ],
-		"0",
+    "retraction_distances_when_ec": [
-		"0"
+        "0",
-	],
+        "0",
-	"nozzle_temperature": [
+        "0"
-		"270",
+    ],
-		"270"
+    "slow_down_layer_time": [
-	],
+        "12"
-	"nozzle_temperature_initial_layer": [
+    ],
-		"260",
+    "slow_down_min_speed": [
-		"260"
+        "20",
-	],
+        "20",
-	"overhang_fan_speed": [
+        "20"
-		"100"
+    ],
-	],
+    "compatible_printers": [
-	"pre_start_fan_time": [
+        "Bambu Lab H2S 0.4 nozzle"
-		"2"
+    ],
-	],
+    "filament_start_gcode": [
-	"retraction_distances_when_ec": [
+        "; filament start gcode\n"
-		"0",
+    ],
-		"0"
+    "filament_end_gcode": [
-	],
+        "; filament end gcode \n"
-	"slow_down_layer_time": [
+    ]
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL P1S 0.4 nozzle.json

@@ -0,0 +1,72 @@
+{
+    "type": "filament",
+    "name": "Bambu ABS @BBL P1S 0.4 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_38",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_deretraction_speed": [
+        "nil",
+        "40"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "25"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_retraction_speed": [
+        "nil",
+        "40"
+    ],
+    "filament_z_hop": [
+        "nil",
+        "0.6"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1S 0.4 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL P1S 0.6 nozzle.json

@@ -0,0 +1,72 @@
+{
+    "type": "filament",
+    "name": "Bambu ABS @BBL P1S 0.6 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_39",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_deretraction_speed": [
+        "nil",
+        "40"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "25"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_retraction_speed": [
+        "nil",
+        "40"
+    ],
+    "filament_z_hop": [
+        "nil",
+        "0.6"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1S 0.6 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.2 nozzle.json

@@ -1,174 +1,93 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL P2S 0.2 nozzle",
+    "name": "Bambu ABS @BBL P2S 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_14",
+    "setting_id": "GFSB00_14",
-	"instantiation": "true",
+    "instantiation": "true",
-	"activate_air_filtration": [
+    "activate_air_filtration": [
-		"0"
+        "0"
-	],
+    ],
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_min_speed": [
+    "counter_coef_2": [
-		"40"
+        "0.0124"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_3": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_max": [
-	"filament_flow_ratio": [
+        "0.3341"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_min": [
-	],
+        "0.0241"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_min_speed": [
-		"0"
+        "40"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"3",
+        "10",
-		"3"
+        "10"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_flush_volumetric_speed": [
-		"nil",
+        "3",
-		"nil"
+        "3"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"2",
+        "2",
-		"2"
+        "2"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"-1",
+        "0",
-		"-1"
+        "0"
-	],
+    ],
-	"filament_ramming_volumetric_speed_nc": [
+    "filament_retraction_distances_when_cut": [
-		"-1",
+        "10",
-		"-1"
+        "10"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "hole_coef_2": [
-		"nil",
+        "-0.0008"
-		"nil"
+    ],
-	],
+    "hole_coef_3": [
-	"filament_retract_restart_extra": [
+        "0.1319"
-		"nil",
+    ],
-		"nil"
+    "hole_limit_max": [
-	],
+        "0.1319"
-	"filament_retract_when_changing_layer": [
+    ],
-		"nil",
+    "hole_limit_min": [
-		"nil"
+        "0.1119"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "include": [
-		"10",
+        "fdm_filament_template_direct_dual"
-		"10"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_retraction_length": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retraction_minimum_travel": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retraction_speed": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_wipe": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_wipe_distance": [
+        "12"
-		"nil",
+    ],
-		"nil"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_z_hop": [
+        "20"
-		"nil",
+    ],
-		"nil"
+    "compatible_printers": [
-	],
+        "Bambu Lab P2S 0.2 nozzle"
-	"filament_z_hop_types": [
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil"
+        "; filament start gcode\n"
-	],
+    ]
-	"filament_extruder_variant": [
+}
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.6 nozzle.json

@@ -1,174 +1,105 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL P2S 0.6 nozzle",
+    "name": "Bambu ABS @BBL P2S 0.6 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_36",
+    "setting_id": "GFSB00_36",
-	"instantiation": "true",
+    "instantiation": "true",
-	"activate_air_filtration": [
+    "chamber_temperatures": [
-		"0"
+        "65"
-	],
+    ],
-	"chamber_temperatures": [
+    "counter_coef_2": [
-		"65"
+        "0.0124"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_3": [
-		"60"
+        "0.0241"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_max": [
-	"filament_flow_ratio": [
+        "0.3341"
-		"0.95",
+    ],
-		"0.95"
+    "fan_max_speed": [
-	],
+        "60"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "filament_cooling_before_tower": [
-		"0"
+        "10",
-	],
+        "10",
-	"filament_flush_volumetric_speed": [
+        "10"
-		"0",
+    ],
-		"0"
+    "filament_max_volumetric_speed": [
-	],
+        "16",
-	"filament_long_retractions_when_cut": [
+        "35",
-		"nil",
+        "16"
-		"nil"
+    ],
-	],
+    "filament_retraction_distances_when_cut": [
-	"filament_max_volumetric_speed": [
+        "10",
-		"16",
+        "10",
-		"35"
+        "10"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_retraction_length": [
-		"-1",
+        "0.4",
-		"-1"
+        "0.4",
-	],
+        "0.4"
-	"filament_ramming_volumetric_speed_nc": [
+    ],
-		"-1",
+    "filament_z_hop_types": [
-		"-1"
+        "Spiral Lift",
-	],
+        "Spiral Lift",
-	"filament_retract_before_wipe": [
+        "Spiral Lift"
-		"nil",
+    ],
-		"nil"
+    "filament_ramming_travel_time": [
-	],
+        "0",
-	"filament_retract_restart_extra": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "hole_coef_2": [
-	"filament_retract_when_changing_layer": [
+        "-0.0008"
-		"nil",
+    ],
-		"nil"
+    "hole_coef_3": [
-	],
+        "0.1319"
-	"filament_retraction_distances_when_cut": [
+    ],
-		"10",
+    "hole_limit_min": [
-		"10"
+        "0.1119"
-	],
+    ],
-	"filament_retraction_length": [
+    "hole_limit_max": [
-		"0.4",
+        "0.1319"
-		"0.4"
+    ],
-	],
+    "include": [
-	"filament_retraction_minimum_travel": [
+        "fdm_filament_template_direct_dual_e3d"
-		"nil",
+    ],
-		"nil"
+    "long_retractions_when_ec": [
-	],
+        "0",
-	"filament_retraction_speed": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_wipe": [
+        "270",
-		"nil",
+        "270",
-		"nil"
+        "270"
-	],
+    ],
-	"filament_wipe_distance": [
+    "nozzle_temperature_initial_layer": [
-		"nil",
+        "260",
-		"nil"
+        "260",
-	],
+        "260"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "retraction_distances_when_ec": [
-		"nil"
+        "0",
-	],
+        "0",
-	"filament_z_hop_types": [
+        "0"
-		"Spiral Lift",
+    ],
-		"Spiral Lift"
+    "slow_down_layer_time": [
-	],
+        "12"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "slow_down_min_speed": [
-		"Direct Drive High Flow"
+        "20",
-	],
+        "20",
-	"filament_pre_cooling_temperature": [
+        "20"
-		"0",
+    ],
-		"0"
+    "compatible_printers": [
-	],
+        "Bambu Lab P2S 0.6 nozzle"
-	"filament_pre_cooling_temperature_nc": [
+    ],
-		"0",
+    "filament_start_gcode": [
-		"0"
+        "; filament start gcode\n"
-	],
+    ]
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.8 nozzle.json

@@ -1,177 +1,93 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL P2S 0.8 nozzle",
+    "name": "Bambu ABS @BBL P2S 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_15",
+    "setting_id": "GFSB00_15",
-	"instantiation": "true",
+    "instantiation": "true",
-	"activate_air_filtration": [
+    "activate_air_filtration": [
-		"0"
+        "0"
-	],
+    ],
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_2": [
-		"60"
+        "0.0124"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_3": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_max": [
-	"filament_flow_ratio": [
+        "0.3341"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_min": [
-	],
+        "0.0241"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_max_speed": [
-		"0"
+        "60"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"0",
+        "10",
-		"0"
+        "10"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_max_volumetric_speed": [
-		"nil",
+        "18",
-		"nil"
+        "35"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"18",
+        "0",
-		"35"
+        "0"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_retraction_distances_when_cut": [
-		"-1",
+        "10",
-		"-1"
+        "10"
-	],
+    ],
-	"filament_ramming_volumetric_speed_nc": [
+    "filament_retraction_length": [
-		"-1",
+        "0.4",
-		"-1"
+        "0.4"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_z_hop_types": [
-		"nil",
+        "Spiral Lift",
-		"nil"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retract_restart_extra": [
+    "hole_coef_2": [
-		"nil",
+        "-0.0008"
-		"nil"
+    ],
-	],
+    "hole_coef_3": [
-	"filament_retract_when_changing_layer": [
+        "0.1319"
-		"nil",
+    ],
-		"nil"
+    "hole_limit_max": [
-	],
+        "0.1319"
-	"filament_retraction_distances_when_cut": [
+    ],
-		"10",
+    "hole_limit_min": [
-		"10"
+        "0.1119"
-	],
+    ],
-	"filament_retraction_length": [
+    "include": [
-		"0.4",
+        "fdm_filament_template_direct_dual"
-		"0.4"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_retraction_minimum_travel": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retraction_speed": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_wipe": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_wipe_distance": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_z_hop": [
+        "12"
-		"nil",
+    ],
-		"nil"
+    "compatible_printers": [
-	],
+        "Bambu Lab P2S 0.8 nozzle"
-	"filament_z_hop_types": [
+    ],
-		"Spiral Lift",
+    "filament_start_gcode": [
-		"Spiral Lift"
+        "; filament start gcode\n"
-	],
+    ]
-	"filament_extruder_variant": [
+}
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS @BBL P2S.json

@@ -1,174 +1,108 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL P2S",
+    "name": "Bambu ABS @BBL P2S",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_10",
+    "setting_id": "GFSB00_10",
-	"instantiation": "true",
+    "instantiation": "true",
-	"activate_air_filtration": [
+    "activate_air_filtration": [
-		"0"
+        "0"
-	],
+    ],
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_2": [
-		"60"
+        "0.0124"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_3": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_min": [
-	"filament_flow_ratio": [
+        "0.0241"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_max": [
-	],
+        "0.3341"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_max_speed": [
-		"0"
+        "60"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"0",
+        "10",
-		"0"
+        "10",
-	],
+        "10"
-	"filament_long_retractions_when_cut": [
+    ],
-		"nil",
+    "filament_max_volumetric_speed": [
-		"nil"
+        "16",
-	],
+        "25",
-	"filament_max_volumetric_speed": [
+        "16"
-		"16",
+    ],
-		"25"
+    "filament_retraction_distances_when_cut": [
-	],
+        "10",
-	"filament_ramming_volumetric_speed": [
+        "10",
-		"-1",
+        "10"
-		"-1"
+    ],
-	],
+    "filament_retraction_length": [
-	"filament_ramming_volumetric_speed_nc": [
+        "0.4",
-		"-1",
+        "0.4",
-		"-1"
+        "0.4"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_z_hop_types": [
-		"nil",
+        "Spiral Lift",
-		"nil"
+        "Spiral Lift",
-	],
+        "Spiral Lift"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "filament_ramming_travel_time": [
-		"nil"
+        "0",
-	],
+        "0",
-	"filament_retract_when_changing_layer": [
+        "0"
-		"nil",
+    ],
-		"nil"
+    "hole_coef_2": [
-	],
+        "-0.0008"
-	"filament_retraction_distances_when_cut": [
+    ],
-		"10",
+    "hole_coef_3": [
-		"10"
+        "0.1319"
-	],
+    ],
-	"filament_retraction_length": [
+    "hole_limit_min": [
-		"0.4",
+        "0.1119"
-		"0.4"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_retraction_minimum_travel": [
+        "0.1319"
-		"nil",
+    ],
-		"nil"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual_e3d"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "long_retractions_when_ec": [
-		"nil"
+        "0",
-	],
+        "0",
-	"filament_wipe": [
+        "0"
-		"nil",
+    ],
-		"nil"
+    "nozzle_temperature": [
-	],
+        "270",
-	"filament_wipe_distance": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_z_hop": [
+        "260",
-		"nil",
+        "260",
-		"nil"
+        "260"
-	],
+    ],
-	"filament_z_hop_types": [
+    "retraction_distances_when_ec": [
-		"Spiral Lift",
+        "0",
-		"Spiral Lift"
+        "0",
-	],
+        "0"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "slow_down_layer_time": [
-		"Direct Drive High Flow"
+        "12"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "slow_down_min_speed": [
-		"0",
+        "20",
-		"0"
+        "20",
-	],
+        "20"
-	"filament_pre_cooling_temperature_nc": [
+    ],
-		"0",
+    "compatible_printers": [
-		"0"
+        "Bambu Lab P2S 0.4 nozzle"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_start_gcode": [
-		"0",
+        "; filament start gcode\n"
-		"0"
+    ]
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json

@@ -1,127 +1,58 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL X1C 0.2 nozzle",
+    "name": "Bambu ABS @BBL X1C 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_00",
+    "setting_id": "GFSB00_00",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"2",
+        "2",
-		"2"
+        "2"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"18",
+        "18",
-		"18"
+        "18"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_ramming_travel_time": [
-		"0.95",
+        "0",
-		"0.95"
+        "0"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_flush_temp": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_flush_volumetric_speed": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_ramming_volumetric_speed": [
+        "260",
-		"-1",
+        "260"
-		"-1"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_before_wipe": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_retract_restart_extra": [
+        "12"
-		"nil",
+    ],
-		"nil"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_retract_when_changing_layer": [
+        "20"
-		"nil",
+    ],
-		"nil"
+    "compatible_printers": [
-	],
+        "Bambu Lab X1 Carbon 0.2 nozzle",
-	"filament_retraction_length": [
+        "Bambu Lab X1 0.2 nozzle",
-		"nil",
+        "Bambu Lab P1S 0.2 nozzle"
-		"nil"
+    ]
-	],
+}
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 Carbon 0.2 nozzle",
-		"Bambu Lab X1 0.2 nozzle",
-		"Bambu Lab P1S 0.2 nozzle"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.6 nozzle.json

@@ -0,0 +1,64 @@
+{
+    "type": "filament",
+    "name": "Bambu ABS @BBL X1C 0.6 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_40",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "25"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.8"
+    ],
+    "filament_z_hop": [
+        "nil",
+        "0.6"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.6 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json

@@ -1,130 +1,58 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL X1C 0.8 nozzle",
+    "name": "Bambu ABS @BBL X1C 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_01",
+    "setting_id": "GFSB00_01",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"18",
+        "18",
-		"18"
+        "18"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"18",
+        "18",
-		"18"
+        "18"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_ramming_travel_time": [
-		"0.95",
+        "0",
-		"0.95"
+        "0"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_retraction_length": [
-		"nil",
+        "0.4",
-		"nil"
+        "nil"
-	],
+    ],
-	"filament_flush_temp": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_flush_volumetric_speed": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_ramming_volumetric_speed": [
+        "260",
-		"-1",
+        "260"
-		"-1"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_before_wipe": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_restart_extra": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_retract_when_changing_layer": [
+        "12"
-		"nil",
+    ],
-		"nil"
+    "compatible_printers": [
-	],
+        "Bambu Lab X1 Carbon 0.8 nozzle",
-	"filament_retraction_length": [
+        "Bambu Lab X1 0.8 nozzle",
-		"nil",
+        "Bambu Lab P1S 0.8 nozzle"
-		"nil"
+    ]
-	],
+}
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab P1S 0.8 nozzle"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json

@@ -1,130 +1,74 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL X1C",
+    "name": "Bambu ABS @BBL X1C",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00",
+    "setting_id": "GFSB00",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_deretraction_speed": [
-		"1",
+        "nil",
-		"1"
+        "40"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_long_retractions_when_cut": [
-		"16",
+        "1",
-		"16"
+        "nil"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_max_volumetric_speed": [
-		"18",
+        "16",
-		"18"
+        "25"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_retraction_distances_when_cut": [
-		"0.95",
+        "18",
-		"0.95"
+        "nil"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_retraction_length": [
-		"nil",
+        "0.4",
-		"nil"
+        "0.4"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_retraction_speed": [
-		"0",
+        "nil",
-		"0"
+        "40"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_z_hop": [
-		"0",
+        "nil",
-		"0"
+        "0.6"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"-1",
+        "0",
-		"-1"
+        "0"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_retract_restart_extra": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retract_when_changing_layer": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retraction_length": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retraction_minimum_travel": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_retraction_speed": [
+        "12"
-		"nil",
+    ],
-		"nil"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_wipe": [
+        "20"
-		"nil",
+    ],
-		"nil"
+    "compatible_printers": [
-	],
+        "Bambu Lab X1 Carbon 0.4 nozzle",
-	"filament_wipe_distance": [
+        "Bambu Lab X1 0.4 nozzle",
-		"nil",
+        "Bambu Lab X1 0.6 nozzle"
-		"nil"
+    ]
-	],
+}
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.2 nozzle.json

@@ -1,125 +1,56 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL X1E 0.2 nozzle",
+    "name": "Bambu ABS @BBL X1E 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_05",
+    "setting_id": "GFSB00_05",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_long_retractions_when_cut": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "2",
-		"0.95"
+        "2"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_retraction_distances_when_cut": [
-		"0",
+        "18",
-		"0"
+        "18"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "include": [
-		"1",
+        "fdm_filament_template_direct_dual"
-		"1"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_max_volumetric_speed": [
+        "0",
-		"2",
+        "0"
-		"2"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_ramming_volumetric_speed": [
+        "270",
-		"-1",
+        "270"
-		"-1"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_before_wipe": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_restart_extra": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_retract_when_changing_layer": [
+        "12"
-		"nil",
+    ],
-		"nil"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_retraction_distances_when_cut": [
+        "20"
-		"18",
+    ],
-		"18"
+    "compatible_printers": [
-	],
+        "Bambu Lab X1E 0.2 nozzle"
-	"filament_retraction_length": [
+    ]
-		"nil",
+}
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1E 0.2 nozzle"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.8 nozzle.json

@@ -1,128 +1,56 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL X1E 0.8 nozzle",
+    "name": "Bambu ABS @BBL X1E 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_06",
+    "setting_id": "GFSB00_06",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_long_retractions_when_cut": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "18",
-		"0.95"
+        "18"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_retraction_distances_when_cut": [
-		"0",
+        "18",
-		"0"
+        "18"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_retraction_length": [
-		"1",
+        "0.4",
-		"1"
+        "nil"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "include": [
-		"18",
+        "fdm_filament_template_direct_dual"
-		"18"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_ramming_volumetric_speed": [
+        "0",
-		"-1",
+        "0"
-		"-1"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retract_before_wipe": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_restart_extra": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_when_changing_layer": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_retraction_distances_when_cut": [
+        "12"
-		"18",
+    ],
-		"18"
+    "compatible_printers": [
-	],
+        "Bambu Lab X1E 0.8 nozzle"
-	"filament_retraction_length": [
+    ]
-		"nil",
+}
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1E 0.8 nozzle"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS @BBL X1E.json

@@ -1,126 +1,61 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL X1E",
+    "name": "Bambu ABS @BBL X1E",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_04",
+    "setting_id": "GFSB00_04",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_long_retractions_when_cut": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "16",
-		"0.95"
+        "16"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_retraction_distances_when_cut": [
-		"0",
+        "18",
-		"0"
+        "18"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_retraction_length": [
-		"0",
+        "0.4",
-		"0"
+        "nil"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_ramming_travel_time": [
-		"1",
+        "0",
-		"1"
+        "0"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "include": [
-		"16",
+        "fdm_filament_template_direct_dual"
-		"16"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_ramming_volumetric_speed": [
+        "0",
-		"-1",
+        "0"
-		"-1"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retract_before_wipe": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_restart_extra": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_when_changing_layer": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_retraction_distances_when_cut": [
+        "12"
-		"18",
+    ],
-		"18"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_retraction_length": [
+        "20"
-		"nil",
+    ],
-		"nil"
+    "compatible_printers": [
-	],
+        "Bambu Lab X1E 0.4 nozzle",
-	"filament_retraction_minimum_travel": [
+        "Bambu Lab X1E 0.6 nozzle"
-		"nil",
+    ]
-		"nil"
+}
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.2 nozzle.json

@@ -1,299 +1,134 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL X2D 0.2 nozzle",
+    "name": "Bambu ABS @BBL X2D 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_20",
+    "setting_id": "GFSB00_20",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
+    "chamber_temperatures": [
-		"0",
+        "65"
-		"0",
+    ],
-		"0",
+    "counter_coef_2": [
-		"0"
+        "0.0124"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "counter_coef_3": [
-		"10",
+        "0.0241"
-		"10",
+    ],
-		"10",
+    "counter_limit_max": [
-		"10"
+        "0.3341"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "0.0241"
-		"nil",
+    ],
-		"nil",
+    "fan_min_speed": [
-		"nil"
+        "80"
-	],
+    ],
-	"filament_enable_overhang_speed": [
+    "filament_cooling_before_tower": [
-		"1",
+        "10",
-		"1",
+        "10",
-		"1",
+        "10",
-		"1"
+        "10"
-	],
+    ],
-	"filament_extruder_variant": [
+    "filament_extruder_compatibility": [
-		"Direct Drive Standard",
+        "24"
-		"Direct Drive High Flow",
+    ],
-		"Bowden Standard",
+    "filament_flow_ratio": [
-		"Bowden High Flow"
+        "0.95",
-	],
+        "0.95",
-	"filament_flush_temp": [
+        "0.95",
-		"0",
+        "0.95"
-		"0",
+    ],
-		"0",
+    "filament_flush_volumetric_speed": [
-		"0"
+        "3",
-	],
+        "3",
-	"filament_flush_volumetric_speed": [
+        "3",
-		"3",
+        "3"
-		"3",
+    ],
-		"3",
+    "filament_max_volumetric_speed": [
-		"3"
+        "2",
-	],
+        "2",
-	"filament_long_retractions_when_cut": [
+        "2",
-		"nil",
+        "2"
-		"nil",
+    ],
-		"nil",
+    "filament_ramming_travel_time": [
-		"nil"
+        "0",
-	],
+        "0",
-	"filament_overhang_1_4_speed": [
+        "0",
-		"0",
+        "0"
-		"0",
+    ],
-		"0",
+    "filament_retraction_distances_when_cut": [
-		"0"
+        "10",
-	],
+        "10",
-	"filament_overhang_2_4_speed": [
+        "10",
-		"50",
+        "10"
-		"50",
+    ],
-		"50",
+    "filament_tower_interface_print_temp": [
-		"50"
+        "270"
-	],
+    ],
-	"filament_overhang_3_4_speed": [
+    "filament_wipe": [
-		"30",
+        "1",
-		"30",
+        "nil",
-		"30",
+        "1",
-		"30"
+        "nil"
-	],
+    ],
-	"filament_overhang_4_4_speed": [
+    "filament_wipe_distance": [
-		"10",
+        "1",
-		"10",
+        "nil",
-		"10",
+        "1",
-		"10"
+        "nil"
-	],
+    ],
-	"filament_overhang_totally_speed": [
+    "filament_z_hop_types": [
-		"10",
+        "Spiral Lift",
-		"10",
+        "nil",
-		"10",
+        "Spiral Lift",
-		"10"
+        "nil"
-	],
+    ],
-	"filament_bridge_speed": [
+    "hole_coef_2": [
-		"25",
+        "-0.0008"
-		"25",
+    ],
-		"25",
+    "hole_coef_3": [
-		"25"
+        "0.1319"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "hole_limit_max": [
-		"0",
+        "0.1319"
-		"0",
+    ],
-		"0",
+    "hole_limit_min": [
-		"0"
+        "0.1119"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_bowden"
-		"0",
+    ],
-		"0",
+    "nozzle_temperature": [
-		"0"
+        "270",
-	],
+        "270",
-	"filament_ramming_travel_time_nc": [
+        "270",
-		"0",
+        "270"
-		"0",
+    ],
-		"0",
+    "nozzle_temperature_initial_layer": [
-		"0"
+        "260",
-	],
+        "260",
-	"filament_retract_length_nc": [
+        "260",
-		"14",
+        "260"
-		"14",
+    ],
-		"14",
+    "retraction_distances_when_ec": [
-		"14"
+        "3",
-	],
+        "3",
-	"filament_ramming_volumetric_speed": [
+        "4",
-		"-1",
+        "4"
-		"-1",
+    ],
-		"-1",
+    "slow_down_layer_time": [
-		"-1"
+        "12"
-	],
+    ],
-	"filament_ramming_volumetric_speed_nc": [
+    "slow_down_min_speed": [
-		"-1",
+        "20",
-		"-1",
+        "20",
-		"-1",
+        "20",
-		"-1"
+        "20"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "compatible_printers": [
-		"nil",
+        "Bambu Lab X2D 0.2 nozzle"
-		"nil",
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil"
+        "; filament start gcode\n"
-	],
+    ]
-	"filament_retract_restart_extra": [
+}
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"nil",
-		"Spiral Lift",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0124"
-	],
-	"counter_coef_3": [
-		"0.0241"
-	],
-	"counter_limit_max": [
-		"0.3341"
-	],
-	"counter_limit_min": [
-		"0.0241"
-	],
-	"fan_min_speed": [
-		"80"
-	],
-	"filament_extruder_compatibility": [
-		"24"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"2",
-		"2",
-		"2",
-		"2"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"hole_coef_2": [
-		"-0.0008"
-	],
-	"hole_coef_3": [
-		"0.1319"
-	],
-	"hole_limit_max": [
-		"0.1319"
-	],
-	"hole_limit_min": [
-		"0.1119"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260",
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.4 nozzle.json

@@ -1,299 +1,163 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL X2D 0.4 nozzle",
+    "name": "Bambu ABS @BBL X2D 0.4 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_09",
+    "setting_id": "GFSB00_09",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
+    "chamber_temperatures": [
-		"0",
+        "65"
-		"0",
+    ],
-		"0",
+    "counter_coef_2": [
-		"0"
+        "0.0124"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "counter_coef_3": [
-		"10",
+        "0.0241"
-		"10",
+    ],
-		"10",
+    "counter_limit_max": [
-		"10"
+        "0.3341"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "0.0241"
-		"nil",
+    ],
-		"nil",
+    "fan_max_speed": [
-		"nil"
+        "60"
-	],
+    ],
-	"filament_enable_overhang_speed": [
+    "filament_cooling_before_tower": [
-		"1",
+        "10",
-		"1",
+        "10",
-		"1",
+        "10",
-		"1"
+        "10",
-	],
+        "10",
-	"filament_extruder_variant": [
+        "10"
-		"Direct Drive Standard",
+    ],
-		"Direct Drive High Flow",
+    "filament_extruder_compatibility": [
-		"Bowden Standard",
+        "24"
-		"Bowden High Flow"
+    ],
-	],
+    "filament_flow_ratio": [
-	"filament_flush_temp": [
+        "0.95",
-		"0",
+        "0.95",
-		"0",
+        "0.95",
-		"0",
+        "0.95",
-		"0"
+        "0.95",
-	],
+        "0.95"
-	"filament_flush_volumetric_speed": [
+    ],
-		"0",
+    "filament_max_volumetric_speed": [
-		"0",
+        "16",
-		"0",
+        "25",
-		"0"
+        "16",
-	],
+        "16",
-	"filament_long_retractions_when_cut": [
+        "18",
-		"nil",
+        "16"
-		"nil",
+    ],
-		"nil",
+    "filament_ramming_travel_time": [
-		"nil"
+        "0",
-	],
+        "0",
-	"filament_overhang_1_4_speed": [
+        "0",
-		"0",
+        "0",
-		"0",
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "filament_retraction_distances_when_cut": [
-	"filament_overhang_2_4_speed": [
+        "10",
-		"50",
+        "10",
-		"50",
+        "10",
-		"50",
+        "10",
-		"50"
+        "10",
-	],
+        "10"
-	"filament_overhang_3_4_speed": [
+    ],
-		"30",
+    "filament_retraction_length": [
-		"30",
+        "0.4",
-		"30",
+        "0.4",
-		"30"
+        "0.4",
-	],
+        "nil",
-	"filament_overhang_4_4_speed": [
+        "nil",
-		"10",
+        "nil"
-		"10",
+    ],
-		"10",
+    "filament_tower_interface_print_temp": [
-		"10"
+        "270"
-	],
+    ],
-	"filament_overhang_totally_speed": [
+    "filament_wipe": [
-		"10",
+        "1",
-		"10",
+        "1",
-		"10",
+        "1",
-		"10"
+        "1",
-	],
+        "1",
-	"filament_bridge_speed": [
+        "1"
-		"25",
+    ],
-		"25",
+    "filament_wipe_distance": [
-		"25",
+        "1",
-		"25"
+        "1",
-	],
+        "1",
-	"filament_pre_cooling_temperature": [
+        "1",
-		"0",
+        "1",
-		"0",
+        "1"
-		"0",
+    ],
-		"0"
+    "filament_z_hop_types": [
-	],
+        "Spiral Lift",
-	"filament_pre_cooling_temperature_nc": [
+        "Spiral Lift",
-		"0",
+        "Spiral Lift",
-		"0",
+        "Spiral Lift",
-		"0",
+        "Spiral Lift",
-		"0"
+        "Spiral Lift"
-	],
+    ],
-	"filament_ramming_travel_time_nc": [
+    "hole_coef_2": [
-		"0",
+        "-0.0008"
-		"0",
+    ],
-		"0",
+    "hole_coef_3": [
-		"0"
+        "0.1319"
-	],
+    ],
-	"filament_retract_length_nc": [
+    "hole_limit_max": [
-		"14",
+        "0.1319"
-		"14",
+    ],
-		"14",
+    "hole_limit_min": [
-		"14"
+        "0.1119"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "include": [
-		"-1",
+        "fdm_filament_template_direct_bowden_e3d"
-		"-1",
+    ],
-		"-1",
+    "nozzle_temperature": [
-		"-1"
+        "270",
-	],
+        "270",
-	"filament_ramming_volumetric_speed_nc": [
+        "270",
-		"-1",
+        "270",
-		"-1",
+        "270",
-		"-1",
+        "270"
-		"-1"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_before_wipe": [
+        "260",
-		"nil",
+        "260",
-		"nil",
+        "260",
-		"nil",
+        "260",
-		"nil"
+        "260",
-	],
+        "260"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "retraction_distances_when_ec": [
-		"nil",
+        "3",
-		"nil",
+        "3",
-		"nil"
+        "3",
-	],
+        "4",
-	"filament_retract_when_changing_layer": [
+        "4",
-		"nil",
+        "4"
-		"nil",
+    ],
-		"nil",
+    "slow_down_layer_time": [
-		"nil"
+        "12"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "slow_down_min_speed": [
-		"10",
+        "20",
-		"10",
+        "20",
-		"10",
+        "20",
-		"10"
+        "20",
-	],
+        "20",
-	"filament_retraction_length": [
+        "20"
-		"0.4",
+    ],
-		"0.4",
+    "temperature_vitrification": [
-		"nil",
+        "100"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retraction_minimum_travel": [
+        "Bambu Lab X2D 0.4 nozzle"
-		"nil",
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil",
+        "; filament start gcode\n"
-		"nil"
+    ]
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift",
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0124"
-	],
-	"counter_coef_3": [
-		"0.0241"
-	],
-	"counter_limit_max": [
-		"0.3341"
-	],
-	"counter_limit_min": [
-		"0.0241"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_extruder_compatibility": [
-		"24"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"16",
-		"25",
-		"16",
-		"18"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"hole_coef_2": [
-		"-0.0008"
-	],
-	"hole_coef_3": [
-		"0.1319"
-	],
-	"hole_limit_max": [
-		"0.1319"
-	],
-	"hole_limit_min": [
-		"0.1119"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260",
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.8 nozzle.json

@@ -1,299 +1,134 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL X2D 0.8 nozzle",
+    "name": "Bambu ABS @BBL X2D 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_30",
+    "setting_id": "GFSB00_30",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
+    "chamber_temperatures": [
-		"0",
+        "65"
-		"0",
+    ],
-		"0",
+    "counter_coef_2": [
-		"0"
+        "0.0124"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "counter_coef_3": [
-		"10",
+        "0.0241"
-		"10",
+    ],
-		"10",
+    "counter_limit_max": [
-		"10"
+        "0.3341"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "0.0241"
-		"nil",
+    ],
-		"nil",
+    "fan_max_speed": [
-		"nil"
+        "60"
-	],
+    ],
-	"filament_enable_overhang_speed": [
+    "filament_cooling_before_tower": [
-		"1",
+        "10",
-		"1",
+        "10",
-		"1",
+        "10",
-		"1"
+        "10"
-	],
+    ],
-	"filament_extruder_variant": [
+    "filament_extruder_compatibility": [
-		"Direct Drive Standard",
+        "24"
-		"Direct Drive High Flow",
+    ],
-		"Bowden Standard",
+    "filament_flow_ratio": [
-		"Bowden High Flow"
+        "0.95",
-	],
+        "0.95",
-	"filament_flush_temp": [
+        "0.95",
-		"0",
+        "0.95"
-		"0",
+    ],
-		"0",
+    "filament_max_volumetric_speed": [
-		"0"
+        "16",
-	],
+        "35",
-	"filament_flush_volumetric_speed": [
+        "16",
-		"0",
+        "16"
-		"0",
+    ],
-		"0",
+    "filament_ramming_travel_time": [
-		"0"
+        "0",
-	],
+        "0",
-	"filament_long_retractions_when_cut": [
+        "0",
-		"nil",
+        "0"
-		"nil",
+    ],
-		"nil",
+    "filament_retraction_distances_when_cut": [
-		"nil"
+        "10",
-	],
+        "10",
-	"filament_overhang_1_4_speed": [
+        "10",
-		"0",
+        "10"
-		"0",
+    ],
-		"0",
+    "filament_retraction_length": [
-		"0"
+        "0.4",
-	],
+        "nil",
-	"filament_overhang_2_4_speed": [
+        "nil",
-		"50",
+        "nil"
-		"50",
+    ],
-		"50",
+    "filament_tower_interface_print_temp": [
-		"50"
+        "270"
-	],
+    ],
-	"filament_overhang_3_4_speed": [
+    "filament_wipe": [
-		"30",
+        "1",
-		"30",
+        "nil",
-		"30",
+        "1",
-		"30"
+        "nil"
-	],
+    ],
-	"filament_overhang_4_4_speed": [
+    "filament_wipe_distance": [
-		"10",
+        "1",
-		"10",
+        "nil",
-		"10",
+        "1",
-		"10"
+        "nil"
-	],
+    ],
-	"filament_overhang_totally_speed": [
+    "filament_z_hop_types": [
-		"10",
+        "Spiral Lift",
-		"10",
+        "nil",
-		"10",
+        "Spiral Lift",
-		"10"
+        "nil"
-	],
+    ],
-	"filament_bridge_speed": [
+    "hole_coef_2": [
-		"25",
+        "-0.0008"
-		"25",
+    ],
-		"25",
+    "hole_coef_3": [
-		"25"
+        "0.1319"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "hole_limit_max": [
-		"0",
+        "0.1319"
-		"0",
+    ],
-		"0",
+    "hole_limit_min": [
-		"0"
+        "0.1119"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_bowden"
-		"0",
+    ],
-		"0",
+    "nozzle_temperature": [
-		"0"
+        "270",
-	],
+        "270",
-	"filament_ramming_travel_time_nc": [
+        "270",
-		"0",
+        "270"
-		"0",
+    ],
-		"0",
+    "nozzle_temperature_initial_layer": [
-		"0"
+        "260",
-	],
+        "260",
-	"filament_retract_length_nc": [
+        "260",
-		"14",
+        "260"
-		"14",
+    ],
-		"14",
+    "retraction_distances_when_ec": [
-		"14"
+        "3",
-	],
+        "3",
-	"filament_ramming_volumetric_speed": [
+        "4",
-		"-1",
+        "4"
-		"-1",
+    ],
-		"-1",
+    "slow_down_layer_time": [
-		"-1"
+        "12"
-	],
+    ],
-	"filament_ramming_volumetric_speed_nc": [
+    "slow_down_min_speed": [
-		"-1",
+        "20",
-		"-1",
+        "20",
-		"-1",
+        "20",
-		"-1"
+        "20"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "compatible_printers": [
-		"nil",
+        "Bambu Lab X2D 0.8 nozzle"
-		"nil",
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil"
+        "; filament start gcode\n"
-	],
+    ]
-	"filament_retract_restart_extra": [
+}
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"nil",
-		"Spiral Lift",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0124"
-	],
-	"counter_coef_3": [
-		"0.0241"
-	],
-	"counter_limit_max": [
-		"0.3341"
-	],
-	"counter_limit_min": [
-		"0.0241"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_extruder_compatibility": [
-		"24"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"16",
-		"35",
-		"16",
-		"16"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"hole_coef_2": [
-		"-0.0008"
-	],
-	"hole_coef_3": [
-		"0.1319"
-	],
-	"hole_limit_max": [
-		"0.1319"
-	],
-	"hole_limit_min": [
-		"0.1119"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260",
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS @BBL X2D.json

@@ -1,299 +1,160 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL X2D",
+    "name": "Bambu ABS @BBL X2D",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_19",
+    "setting_id": "GFSB00_19",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
+    "chamber_temperatures": [
-		"0",
+        "65"
-		"0",
+    ],
-		"0",
+    "counter_coef_2": [
-		"0"
+        "0.0124"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "counter_coef_3": [
-		"10",
+        "0.0241"
-		"10",
+    ],
-		"10",
+    "counter_limit_max": [
-		"10"
+        "0.3341"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "0.0241"
-		"nil",
+    ],
-		"nil",
+    "fan_max_speed": [
-		"nil"
+        "60"
-	],
+    ],
-	"filament_enable_overhang_speed": [
+    "filament_cooling_before_tower": [
-		"1",
+        "10",
-		"1",
+        "10",
-		"1",
+        "10",
-		"1"
+        "10",
-	],
+        "10",
-	"filament_extruder_variant": [
+        "10"
-		"Direct Drive Standard",
+    ],
-		"Direct Drive High Flow",
+    "filament_extruder_compatibility": [
-		"Bowden Standard",
+        "24"
-		"Bowden High Flow"
+    ],
-	],
+    "filament_flow_ratio": [
-	"filament_flush_temp": [
+        "0.95",
-		"0",
+        "0.95",
-		"0",
+        "0.95",
-		"0",
+        "0.95",
-		"0"
+        "0.95",
-	],
+        "0.95"
-	"filament_flush_volumetric_speed": [
+    ],
-		"0",
+    "filament_max_volumetric_speed": [
-		"0",
+        "16",
-		"0",
+        "35",
-		"0"
+        "16",
-	],
+        "16",
-	"filament_long_retractions_when_cut": [
+        "16",
-		"nil",
+        "16"
-		"nil",
+    ],
-		"nil",
+    "filament_ramming_travel_time": [
-		"nil"
+        "0",
-	],
+        "0",
-	"filament_overhang_1_4_speed": [
+        "0",
-		"0",
+        "0",
-		"0",
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "filament_retraction_distances_when_cut": [
-	"filament_overhang_2_4_speed": [
+        "10",
-		"50",
+        "10",
-		"50",
+        "10",
-		"50",
+        "10",
-		"50"
+        "10",
-	],
+        "10"
-	"filament_overhang_3_4_speed": [
+    ],
-		"30",
+    "filament_retraction_length": [
-		"30",
+        "0.4",
-		"30",
+        "nil",
-		"30"
+        "0.4",
-	],
+        "nil",
-	"filament_overhang_4_4_speed": [
+        "nil",
-		"10",
+        "nil"
-		"10",
+    ],
-		"10",
+    "filament_tower_interface_print_temp": [
-		"10"
+        "270"
-	],
+    ],
-	"filament_overhang_totally_speed": [
+    "filament_wipe": [
-		"10",
+        "1",
-		"10",
+        "nil",
-		"10",
+        "1",
-		"10"
+        "1",
-	],
+        "nil",
-	"filament_bridge_speed": [
+        "1"
-		"25",
+    ],
-		"25",
+    "filament_wipe_distance": [
-		"25",
+        "1",
-		"25"
+        "nil",
-	],
+        "1",
-	"filament_pre_cooling_temperature": [
+        "1",
-		"0",
+        "nil",
-		"0",
+        "1"
-		"0",
+    ],
-		"0"
+    "filament_z_hop_types": [
-	],
+        "Spiral Lift",
-	"filament_pre_cooling_temperature_nc": [
+        "nil",
-		"0",
+        "Spiral Lift",
-		"0",
+        "Spiral Lift",
-		"0",
+        "nil",
-		"0"
+        "Spiral Lift"
-	],
+    ],
-	"filament_ramming_travel_time_nc": [
+    "hole_coef_2": [
-		"0",
+        "-0.0008"
-		"0",
+    ],
-		"0",
+    "hole_coef_3": [
-		"0"
+        "0.1319"
-	],
+    ],
-	"filament_retract_length_nc": [
+    "hole_limit_max": [
-		"14",
+        "0.1319"
-		"14",
+    ],
-		"14",
+    "hole_limit_min": [
-		"14"
+        "0.1119"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "include": [
-		"-1",
+        "fdm_filament_template_direct_bowden_e3d"
-		"-1",
+    ],
-		"-1",
+    "nozzle_temperature": [
-		"-1"
+        "270",
-	],
+        "270",
-	"filament_ramming_volumetric_speed_nc": [
+        "270",
-		"-1",
+        "270",
-		"-1",
+        "270",
-		"-1",
+        "270"
-		"-1"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_before_wipe": [
+        "260",
-		"nil",
+        "260",
-		"nil",
+        "260",
-		"nil",
+        "260",
-		"nil"
+        "260",
-	],
+        "260"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "retraction_distances_when_ec": [
-		"nil",
+        "3",
-		"nil",
+        "3",
-		"nil"
+        "3",
-	],
+        "4",
-	"filament_retract_when_changing_layer": [
+        "4",
-		"nil",
+        "4"
-		"nil",
+    ],
-		"nil",
+    "slow_down_layer_time": [
-		"nil"
+        "12"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "slow_down_min_speed": [
-		"10",
+        "20",
-		"10",
+        "20",
-		"10",
+        "20",
-		"10"
+        "20",
-	],
+        "20",
-	"filament_retraction_length": [
+        "20"
-		"0.4",
+    ],
-		"nil",
+    "compatible_printers": [
-		"nil",
+        "Bambu Lab X2D 0.6 nozzle"
-		"nil"
+    ],
-	],
+    "filament_start_gcode": [
-	"filament_retraction_minimum_travel": [
+        "; filament start gcode\n"
-		"nil",
+    ]
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"nil",
-		"Spiral Lift",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0124"
-	],
-	"counter_coef_3": [
-		"0.0241"
-	],
-	"counter_limit_max": [
-		"0.3341"
-	],
-	"counter_limit_min": [
-		"0.0241"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_extruder_compatibility": [
-		"24"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"16",
-		"35",
-		"16",
-		"16"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"hole_coef_2": [
-		"-0.0008"
-	],
-	"hole_coef_3": [
-		"0.1319"
-	],
-	"hole_limit_max": [
-		"0.1319"
-	],
-	"hole_limit_min": [
-		"0.1119"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260",
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @base.json

@@ -1,21 +1,21 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @base",
+    "name": "Bambu ABS @base",
-	"inherits": "fdm_filament_abs",
+    "inherits": "fdm_filament_abs",
-	"from": "system",
+    "from": "system",
-	"filament_id": "OFhuaUQB",
+    "filament_id": "OFhuaUQB",
-	"instantiation": "false",
+    "instantiation": "false",
-	"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+    "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
-	"filament_cost": [
+    "filament_cost": [
-		"24.99"
+        "15.99"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_flow_ratio": [
-		"0.95"
+        "0.95"
-	],
+    ],
-	"filament_vendor": [
+    "filament_vendor": [
-		"Bambu Lab"
+        "Bambu Lab"
-	],
+    ],
-	"impact_strength_z": [
+    "impact_strength_z": [
-		"7.4"
+        "7.4"
-	]
+    ]
-}
+}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL A1.json

@@ -1,19 +1,19 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL A1",
+    "name": "Bambu ABS-GF @BBL A1",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_02",
+    "setting_id": "GFSB50_02",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1"
+        "1"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"18"
+        "18"
-	],
+    ],
-	"compatible_printers": [
+    "compatible_printers": [
-		"Bambu Lab A1 0.4 nozzle",
+        "Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle"
+        "Bambu Lab A1 0.8 nozzle"
-	]
+    ]
-}
+}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2C 0.4 nozzle.json

@@ -1,174 +1,86 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL H2C 0.4 nozzle",
+    "name": "Bambu ABS-GF @BBL H2C 0.4 nozzle",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_08",
+    "setting_id": "GFSB50_08",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "filament_cooling_before_tower": [
-		"10",
+        "10",
-		"10"
+        "10",
-	],
+        "10"
-	"filament_max_volumetric_speed": [
+    ],
-		"12",
+    "filament_max_volumetric_speed": [
-		"12"
+        "12",
-	],
+        "12",
-	"filament_prime_volume": [
+        "12"
-		"30"
+    ],
-	],
+    "filament_prime_volume": [
-	"filament_prime_volume_nc": [
+        "30"
-		"30"
+    ],
-	],
+    "filament_prime_volume_nc": [
-	"filament_pre_cooling_temperature_nc": [
+        "30"
-		"230",
+    ],
-		"230"
+    "filament_pre_cooling_temperature_nc": [
-	],
+        "230",
-	"filament_ramming_travel_time": [
+        "230",
-		"0",
+        "230"
-		"0"
+    ],
-	],
+    "filament_ramming_travel_time": [
-	"filament_ramming_travel_time_nc": [
+        "0",
-		"1",
+        "0",
-		"1"
+        "0"
-	],
+    ],
-	"filament_change_length": [
+    "filament_ramming_travel_time_nc": [
-		"4"
+        "1",
-	],
+        "1",
-	"first_x_layer_fan_speed": [
+        "1"
-		"0"
+    ],
-	],
+    "filament_change_length": [
-	"filament_change_length_nc": [
+        "4"
-		"4"
+    ],
-	],
+    "first_x_layer_fan_speed": [
-	"filament_preheat_temperature_delta": [
+        "0"
-		"20",
+    ],
-		"20"
+    "filament_change_length_nc": [
-	],
+        "4"
-	"filament_adaptive_volumetric_speed": [
+    ],
-		"0",
+    "filament_preheat_temperature_delta": [
-		"0"
+        "20",
-	],
+        "20",
-	"filament_deretraction_speed": [
+        "20"
-		"nil",
+    ],
-		"nil"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual_e3d"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "nozzle_temperature": [
-		"Direct Drive High Flow"
+        "270",
-	],
+        "270",
-	"filament_flush_temp": [
+        "270"
-		"0",
+    ],
-		"0"
+    "nozzle_temperature_initial_layer": [
-	],
+        "260",
-	"filament_flush_volumetric_speed": [
+        "260",
-		"0",
+        "260"
-		"0"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_flow_ratio": [
+        "20",
-		"0.95",
+        "20",
-		"0.95"
+        "20"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "temperature_vitrification": [
-		"nil",
+        "75"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_pre_cooling_temperature": [
+        "Bambu Lab H2C 0.4 nozzle"
-		"0",
+    ],
-		"0"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"filament_retract_length_nc": [
+    ],
-		"14",
+    "filament_end_gcode": [
-		"14"
+        "; filament end gcode \n"
-	],
+    ]
-	"filament_ramming_volumetric_speed": [
+}
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"75"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2C.json

@@ -1,175 +1,87 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL H2C",
+    "name": "Bambu ABS-GF @BBL H2C",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_09",
+    "setting_id": "GFSB50_09",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "filament_cooling_before_tower": [
-		"10",
+        "10",
-		"10"
+        "10",
-	],
+        "10"
-	"filament_max_volumetric_speed": [
+    ],
-		"12",
+    "filament_max_volumetric_speed": [
-		"12"
+        "12",
-	],
+        "12",
-	"filament_prime_volume": [
+        "12"
-		"30"
+    ],
-	],
+    "filament_prime_volume": [
-	"filament_prime_volume_nc": [
+        "30"
-		"30"
+    ],
-	],
+    "filament_prime_volume_nc": [
-	"filament_pre_cooling_temperature_nc": [
+        "30"
-		"230",
+    ],
-		"230"
+    "filament_pre_cooling_temperature_nc": [
-	],
+        "230",
-	"filament_ramming_travel_time": [
+        "230",
-		"0",
+        "230"
-		"0"
+    ],
-	],
+    "filament_ramming_travel_time": [
-	"filament_ramming_travel_time_nc": [
+        "0",
-		"1",
+        "0",
-		"1"
+        "0"
-	],
+    ],
-	"filament_change_length": [
+    "filament_ramming_travel_time_nc": [
-		"4"
+        "1",
-	],
+        "1",
-	"first_x_layer_fan_speed": [
+        "1"
-		"0"
+    ],
-	],
+    "filament_change_length": [
-	"filament_change_length_nc": [
+        "4"
-		"4"
+    ],
-	],
+    "first_x_layer_fan_speed": [
-	"filament_preheat_temperature_delta": [
+        "0"
-		"20",
+    ],
-		"20"
+    "filament_change_length_nc": [
-	],
+        "4"
-	"filament_adaptive_volumetric_speed": [
+    ],
-		"0",
+    "filament_preheat_temperature_delta": [
-		"0"
+        "20",
-	],
+        "20",
-	"filament_deretraction_speed": [
+        "20"
-		"nil",
+    ],
-		"nil"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual_e3d"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "nozzle_temperature": [
-		"Direct Drive High Flow"
+        "270",
-	],
+        "270",
-	"filament_flush_temp": [
+        "270"
-		"0",
+    ],
-		"0"
+    "nozzle_temperature_initial_layer": [
-	],
+        "260",
-	"filament_flush_volumetric_speed": [
+        "260",
-		"0",
+        "260"
-		"0"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_flow_ratio": [
+        "20",
-		"0.95",
+        "20",
-		"0.95"
+        "20"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "temperature_vitrification": [
-		"nil",
+        "75"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_pre_cooling_temperature": [
+        "Bambu Lab H2C 0.6 nozzle",
-		"0",
+        "Bambu Lab H2C 0.8 nozzle"
-		"0"
+    ],
-	],
+    "filament_start_gcode": [
-	"filament_retract_length_nc": [
+        "; filament start gcode\n"
-		"14",
+    ],
-		"14"
+    "filament_end_gcode": [
-	],
+        "; filament end gcode \n"
-	"filament_ramming_volumetric_speed": [
+    ]
-		"-1",
+}
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"75"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.6 nozzle",
-		"Bambu Lab H2C 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2D.json

@@ -1,130 +1,61 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL H2D",
+    "name": "Bambu ABS-GF @BBL H2D",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_03",
+    "setting_id": "GFSB50_03",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10",
-	],
+        "10"
-	"filament_flow_ratio": [
+    ],
-		"0.95",
+    "filament_max_volumetric_speed": [
-		"0.95"
+        "12",
-	],
+        "12",
-	"filament_flush_temp": [
+        "12"
-		"0",
+    ],
-		"0"
+    "filament_ramming_travel_time": [
-	],
+        "0",
-	"filament_flush_volumetric_speed": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "filament_prime_volume": [
-	"filament_long_retractions_when_cut": [
+        "30"
-		"nil",
+    ],
-		"nil"
+    "filament_change_length": [
-	],
+        "4"
-	"filament_max_volumetric_speed": [
+    ],
-		"12",
+    "include": [
-		"12"
+        "fdm_filament_template_direct_dual_e3d"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "nozzle_temperature": [
-		"-1",
+        "270",
-		"-1"
+        "270",
-	],
+        "270"
-	"filament_retract_before_wipe": [
+    ],
-		"nil",
+    "nozzle_temperature_initial_layer": [
-		"nil"
+        "260",
-	],
+        "260",
-	"filament_retract_restart_extra": [
+        "260"
-		"nil",
+    ],
-		"nil"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_retract_when_changing_layer": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retraction_distances_when_cut": [
+        "Bambu Lab H2D 0.4 nozzle",
-		"nil",
+        "Bambu Lab H2D 0.6 nozzle",
-		"nil"
+        "Bambu Lab H2D 0.8 nozzle"
-	],
+    ],
-	"filament_retraction_length": [
+    "filament_start_gcode": [
-		"nil",
+        "; filament start gcode\n"
-		"nil"
+    ],
-	],
+    "filament_end_gcode": [
-	"filament_retraction_minimum_travel": [
+        "; filament end gcode \n"
-		"nil",
+    ]
-		"nil"
+}
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2DP.json

@@ -1,130 +1,49 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL H2DP",
+    "name": "Bambu ABS-GF @BBL H2DP",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_05",
+    "setting_id": "GFSB50_05",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "12",
-		"0.95"
+        "12"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_long_retractions_when_cut": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_max_volumetric_speed": [
+        "260",
-		"12",
+        "260"
-		"12"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_ramming_volumetric_speed": [
+        "20",
-		"-1",
+        "20"
-		"-1"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retract_before_wipe": [
+        "Bambu Lab H2D Pro 0.4 nozzle",
-		"nil",
+        "Bambu Lab H2D Pro 0.6 nozzle",
-		"nil"
+        "Bambu Lab H2D Pro 0.8 nozzle"
-	],
+    ],
-	"filament_retract_restart_extra": [
+    "filament_start_gcode": [
-		"nil",
+        "; filament start gcode\n"
-		"nil"
+    ],
-	],
+    "filament_end_gcode": [
-	"filament_retract_when_changing_layer": [
+        "; filament end gcode \n"
-		"nil",
+    ]
-		"nil"
+}
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2S.json

@@ -1,130 +1,71 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL H2S",
+    "name": "Bambu ABS-GF @BBL H2S",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_10",
+    "setting_id": "GFSB50_10",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10",
-	],
+        "10"
-	"filament_flow_ratio": [
+    ],
-		"0.95",
+    "filament_max_volumetric_speed": [
-		"0.95"
+        "12",
-	],
+        "12",
-	"filament_flush_temp": [
+        "12"
-		"0",
+    ],
-		"0"
+    "filament_prime_volume": [
-	],
+        "30"
-	"filament_flush_volumetric_speed": [
+    ],
-		"0",
+    "filament_ramming_travel_time": [
-		"0"
+        "0",
-	],
+        "0",
-	"filament_long_retractions_when_cut": [
+        "0"
-		"nil",
+    ],
-		"nil"
+    "filament_change_length": [
-	],
+        "4"
-	"filament_max_volumetric_speed": [
+    ],
-		"12",
+    "include": [
-		"12"
+        "fdm_filament_template_direct_dual_e3d"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "long_retractions_when_ec": [
-		"-1",
+        "0",
-		"-1"
+        "0",
-	],
+        "0"
-	"filament_retract_before_wipe": [
+    ],
-		"nil",
+    "nozzle_temperature": [
-		"nil"
+        "270",
-	],
+        "270",
-	"filament_retract_restart_extra": [
+        "270"
-		"nil",
+    ],
-		"nil"
+    "nozzle_temperature_initial_layer": [
-	],
+        "260",
-	"filament_retract_when_changing_layer": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retraction_distances_when_cut": [
+        "0",
-		"nil",
+        "0",
-		"nil"
+        "0"
-	],
+    ],
-	"filament_retraction_length": [
+    "slow_down_min_speed": [
-		"nil",
+        "20",
-		"nil"
+        "20",
-	],
+        "20"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "compatible_printers": [
-		"nil"
+        "Bambu Lab H2S 0.4 nozzle",
-	],
+        "Bambu Lab H2S 0.6 nozzle",
-	"filament_retraction_speed": [
+        "Bambu Lab H2S 0.8 nozzle"
-		"nil",
+    ],
-		"nil"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"filament_wipe": [
+    ],
-		"nil",
+    "filament_end_gcode": [
-		"nil"
+        "; filament end gcode \n"
-	],
+    ]
-	"filament_wipe_distance": [
+}
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL P1P.json

@@ -1,121 +1,52 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL P1P",
+    "name": "Bambu ABS-GF @BBL P1P",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_01",
+    "setting_id": "GFSB50_01",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_max_volumetric_speed": [
-		"18",
+        "12",
-		"18"
+        "12"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_retraction_distances_when_cut": [
-		"0.95",
+        "18",
-		"0.95"
+        "18"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"12",
+        "0",
-		"12"
+        "0"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_flush_temp": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_flush_volumetric_speed": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_ramming_volumetric_speed": [
+        "260",
-		"-1",
+        "260"
-		"-1"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_before_wipe": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retract_restart_extra": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retract_when_changing_layer": [
+        "Bambu Lab P1P 0.8 nozzle",
-		"nil",
+        "Bambu Lab P1P 0.6 nozzle",
-		"nil"
+        "Bambu Lab P1P 0.4 nozzle"
-	],
+    ]
-	"filament_retraction_length": [
+}
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.4 nozzle"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL P2S.json

@@ -1,170 +1,70 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL P2S",
+    "name": "Bambu ABS-GF @BBL P2S",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_04",
+    "setting_id": "GFSB50_04",
-	"instantiation": "true",
+    "instantiation": "true",
-	"activate_air_filtration": [
+    "activate_air_filtration": [
-		"0"
+        "0"
-	],
+    ],
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10",
-	],
+        "10"
-	"filament_flow_ratio": [
+    ],
-		"0.95",
+    "filament_max_volumetric_speed": [
-		"0.95"
+        "12",
-	],
+        "12",
-	"filament_flush_temp": [
+        "12"
-		"0",
+    ],
-		"0"
+    "filament_ramming_travel_time": [
-	],
+        "0",
-	"filament_flush_volumetric_speed": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "filament_retraction_distances_when_cut": [
-	"filament_long_retractions_when_cut": [
+        "10",
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "include": [
-		"12",
+        "fdm_filament_template_direct_dual_e3d"
-		"12"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_ramming_volumetric_speed": [
+        "0",
-		"-1",
+        "0",
-		"-1"
+        "0"
-	],
+    ],
-	"filament_ramming_volumetric_speed_nc": [
+    "nozzle_temperature": [
-		"-1",
+        "270",
-		"-1"
+        "270",
-	],
+        "270"
-	"filament_retract_before_wipe": [
+    ],
-		"nil",
+    "nozzle_temperature_initial_layer": [
-		"nil"
+        "260",
-	],
+        "260",
-	"filament_retract_restart_extra": [
+        "260"
-		"nil",
+    ],
-		"nil"
+    "retraction_distances_when_ec": [
-	],
+        "0",
-	"filament_retract_when_changing_layer": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retraction_distances_when_cut": [
+        "20",
-		"10",
+        "20",
-		"10"
+        "20"
-	],
+    ],
-	"filament_retraction_length": [
+    "compatible_printers": [
-		"nil",
+        "Bambu Lab P2S 0.4 nozzle",
-		"nil"
+        "Bambu Lab P2S 0.6 nozzle",
-	],
+        "Bambu Lab P2S 0.8 nozzle"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil"
+        "; filament start gcode\n"
-	],
+    ]
-	"filament_retraction_speed": [
+}
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL X1C.json

@@ -1,130 +1,61 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL X1C",
+    "name": "Bambu ABS-GF @BBL X1C",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_00",
+    "setting_id": "GFSB50_00",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_max_volumetric_speed": [
-		"18",
+        "12",
-		"18"
+        "12"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_retraction_distances_when_cut": [
-		"0.95",
+        "18",
-		"0.95"
+        "18"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"12",
+        "0",
-		"12"
+        "0"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_flush_temp": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_flush_volumetric_speed": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_ramming_volumetric_speed": [
+        "260",
-		"-1",
+        "260"
-		"-1"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_before_wipe": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retract_restart_extra": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retract_when_changing_layer": [
+        "Bambu Lab P1S 0.4 nozzle",
-		"nil",
+        "Bambu Lab P1S 0.6 nozzle",
-		"nil"
+        "Bambu Lab P1S 0.8 nozzle",
-	],
+        "Bambu Lab X1 0.4 nozzle",
-	"filament_retraction_length": [
+        "Bambu Lab X1 0.6 nozzle",
-		"nil",
+        "Bambu Lab X1 0.8 nozzle",
-		"nil"
+        "Bambu Lab X1 Carbon 0.4 nozzle",
-	],
+        "Bambu Lab X1 Carbon 0.6 nozzle",
-	"filament_retraction_minimum_travel": [
+        "Bambu Lab X1 Carbon 0.8 nozzle",
-		"nil",
+        "Bambu Lab X1E 0.4 nozzle",
-		"nil"
+        "Bambu Lab X1E 0.6 nozzle",
-	],
+        "Bambu Lab X1E 0.8 nozzle"
-	"filament_retraction_speed": [
+    ]
-		"nil",
+}
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL X2D 0.4 nozzle.json

@@ -1,266 +1,103 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL X2D 0.4 nozzle",
+    "name": "Bambu ABS-GF @BBL X2D 0.4 nozzle",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_06",
+    "setting_id": "GFSB50_06",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
+    "chamber_temperatures": [
-		"0",
+        "60"
-		"0",
+    ],
-		"0",
+    "filament_cooling_before_tower": [
-		"0"
+        "10",
-	],
+        "10",
-	"filament_cooling_before_tower": [
+        "10",
-		"10",
+        "10",
-		"10",
+        "10",
-		"10",
+        "10"
-		"10"
+    ],
-	],
+    "filament_flow_ratio": [
-	"filament_deretraction_speed": [
+        "0.95",
-		"nil",
+        "0.95",
-		"nil",
+        "0.95",
-		"nil",
+        "0.95",
-		"nil"
+        "0.95",
-	],
+        "0.95"
-	"filament_enable_overhang_speed": [
+    ],
-		"1",
+    "filament_max_volumetric_speed": [
-		"1",
+        "12",
-		"1",
+        "12",
-		"1"
+        "12",
-	],
+        "12",
-	"filament_extruder_variant": [
+        "12",
-		"Direct Drive Standard",
+        "12"
-		"Direct Drive High Flow",
+    ],
-		"Bowden Standard",
+    "filament_ramming_travel_time": [
-		"Bowden High Flow"
+        "0",
-	],
+        "0",
-	"filament_flush_temp": [
+        "0",
-		"0",
+        "0",
-		"0",
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "filament_retraction_distances_when_cut": [
-	"filament_flush_volumetric_speed": [
+        "10",
-		"0",
+        "10",
-		"0",
+        "10",
-		"0",
+        "10",
-		"0"
+        "10",
-	],
+        "10"
-	"filament_long_retractions_when_cut": [
+    ],
-		"nil",
+    "filament_retraction_length": [
-		"nil",
+        "1",
-		"nil",
+        "1",
-		"nil"
+        "1",
-	],
+        "nil",
-	"filament_overhang_1_4_speed": [
+        "nil",
-		"0",
+        "nil"
-		"0",
+    ],
-		"0",
+    "filament_tower_interface_print_temp": [
-		"0"
+        "270"
-	],
+    ],
-	"filament_overhang_2_4_speed": [
+    "include": [
-		"50",
+        "fdm_filament_template_direct_bowden_e3d"
-		"50",
+    ],
-		"50",
+    "nozzle_temperature": [
-		"50"
+        "270",
-	],
+        "270",
-	"filament_overhang_3_4_speed": [
+        "270",
-		"30",
+        "270",
-		"30",
+        "270",
-		"30",
+        "270"
-		"30"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_overhang_4_4_speed": [
+        "260",
-		"10",
+        "260",
-		"10",
+        "260",
-		"10",
+        "260",
-		"10"
+        "260",
-	],
+        "260"
-	"filament_overhang_totally_speed": [
+    ],
-		"10",
+    "retraction_distances_when_ec": [
-		"10",
+        "3",
-		"10",
+        "3",
-		"10"
+        "3",
-	],
+        "4",
-	"filament_bridge_speed": [
+        "4",
-		"25",
+        "4"
-		"25",
+    ],
-		"25",
+    "slow_down_min_speed": [
-		"25"
+        "20",
-	],
+        "20",
-	"filament_pre_cooling_temperature": [
+        "20",
-		"0",
+        "20",
-		"0",
+        "20",
-		"0",
+        "20"
-		"0"
+    ],
-	],
+    "compatible_printers": [
-	"filament_pre_cooling_temperature_nc": [
+        "Bambu Lab X2D 0.4 nozzle"
-		"0",
+    ],
-		"0",
+    "filament_start_gcode": [
-		"0",
+        "; filament start gcode\n"
-		"0"
+    ]
-	],
+}
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14",
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"1",
-		"1",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"60"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260",
-		"260",
-		"260"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL X2D.json

@@ -1,267 +1,104 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL X2D",
+    "name": "Bambu ABS-GF @BBL X2D",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_07",
+    "setting_id": "GFSB50_07",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
+    "chamber_temperatures": [
-		"0",
+        "60"
-		"0",
+    ],
-		"0",
+    "filament_cooling_before_tower": [
-		"0"
+        "10",
-	],
+        "10",
-	"filament_cooling_before_tower": [
+        "10",
-		"10",
+        "10",
-		"10",
+        "10",
-		"10",
+        "10"
-		"10"
+    ],
-	],
+    "filament_flow_ratio": [
-	"filament_deretraction_speed": [
+        "0.95",
-		"nil",
+        "0.95",
-		"nil",
+        "0.95",
-		"nil",
+        "0.95",
-		"nil"
+        "0.95",
-	],
+        "0.95"
-	"filament_enable_overhang_speed": [
+    ],
-		"1",
+    "filament_max_volumetric_speed": [
-		"1",
+        "12",
-		"1",
+        "12",
-		"1"
+        "12",
-	],
+        "12",
-	"filament_extruder_variant": [
+        "12",
-		"Direct Drive Standard",
+        "12"
-		"Direct Drive High Flow",
+    ],
-		"Bowden Standard",
+    "filament_ramming_travel_time": [
-		"Bowden High Flow"
+        "0",
-	],
+        "0",
-	"filament_flush_temp": [
+        "0",
-		"0",
+        "0",
-		"0",
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "filament_retraction_distances_when_cut": [
-	"filament_flush_volumetric_speed": [
+        "10",
-		"0",
+        "10",
-		"0",
+        "10",
-		"0",
+        "10",
-		"0"
+        "10",
-	],
+        "10"
-	"filament_long_retractions_when_cut": [
+    ],
-		"nil",
+    "filament_retraction_length": [
-		"nil",
+        "1",
-		"nil",
+        "nil",
-		"nil"
+        "1",
-	],
+        "nil",
-	"filament_overhang_1_4_speed": [
+        "nil",
-		"0",
+        "nil"
-		"0",
+    ],
-		"0",
+    "filament_tower_interface_print_temp": [
-		"0"
+        "270"
-	],
+    ],
-	"filament_overhang_2_4_speed": [
+    "include": [
-		"50",
+        "fdm_filament_template_direct_bowden_e3d"
-		"50",
+    ],
-		"50",
+    "nozzle_temperature": [
-		"50"
+        "270",
-	],
+        "270",
-	"filament_overhang_3_4_speed": [
+        "270",
-		"30",
+        "270",
-		"30",
+        "270",
-		"30",
+        "270"
-		"30"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_overhang_4_4_speed": [
+        "260",
-		"10",
+        "260",
-		"10",
+        "260",
-		"10",
+        "260",
-		"10"
+        "260",
-	],
+        "260"
-	"filament_overhang_totally_speed": [
+    ],
-		"10",
+    "retraction_distances_when_ec": [
-		"10",
+        "3",
-		"10",
+        "3",
-		"10"
+        "3",
-	],
+        "4",
-	"filament_bridge_speed": [
+        "4",
-		"25",
+        "4"
-		"25",
+    ],
-		"25",
+    "slow_down_min_speed": [
-		"25"
+        "20",
-	],
+        "20",
-	"filament_pre_cooling_temperature": [
+        "20",
-		"0",
+        "20",
-		"0",
+        "20",
-		"0",
+        "20"
-		"0"
+    ],
-	],
+    "compatible_printers": [
-	"filament_pre_cooling_temperature_nc": [
+        "Bambu Lab X2D 0.6 nozzle",
-		"0",
+        "Bambu Lab X2D 0.8 nozzle"
-		"0",
+    ],
-		"0",
+    "filament_start_gcode": [
-		"0"
+        "; filament start gcode\n"
-	],
+    ]
-	"filament_ramming_travel_time_nc": [
+}
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14",
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"1",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"60"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260",
-		"260",
-		"260"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}

resources/profiles/BBL/filament/Bambu ABS-GF @base.json

@@ -1,45 +1,45 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @base",
+    "name": "Bambu ABS-GF @base",
-	"inherits": "fdm_filament_abs",
+    "inherits": "fdm_filament_abs",
-	"from": "system",
+    "from": "system",
-	"filament_id": "OFknl9Iz",
+    "filament_id": "OFknl9Iz",
-	"instantiation": "false",
+    "instantiation": "false",
-	"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
-	"fan_cooling_layer_time": [
+    "fan_cooling_layer_time": [
-		"12"
+        "12"
-	],
+    ],
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"30"
+        "30"
-	],
+    ],
-	"filament_cost": [
+    "filament_cost": [
-		"29.99"
+        "26.99"
-	],
+    ],
-	"filament_density": [
+    "filament_density": [
-		"1.08"
+        "1.08"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_flow_ratio": [
-		"0.95"
+        "0.95"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"12"
+        "12"
-	],
+    ],
-	"filament_type": [
+    "filament_type": [
-		"ABS-GF"
+        "ABS-GF"
-	],
+    ],
-	"filament_vendor": [
+    "filament_vendor": [
-		"Bambu Lab"
+        "Bambu Lab"
-	],
+    ],
-	"impact_strength_z": [
+    "impact_strength_z": [
-		"5.3"
+        "5.3"
-	],
+    ],
-	"overhang_fan_speed": [
+    "overhang_fan_speed": [
-		"30"
+        "30"
-	],
+    ],
-	"overhang_fan_threshold": [
+    "overhang_fan_threshold": [
-		"10%"
+        "10%"
-	],
+    ],
-	"slow_down_layer_time": [
+    "slow_down_layer_time": [
-		"4"
+        "4"
-	]
+    ]
-}
+}

resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.2 nozzle.json

@@ -1,20 +1,20 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL A1 0.2 nozzle",
+    "name": "Bambu ASA @BBL A1 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_10",
+    "setting_id": "GFSB01_10",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"2"
+        "2"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"18"
+        "18"
-	],
+    ],
-	"compatible_printers": [
+    "compatible_printers": [
-		"Bambu Lab A1 0.2 nozzle"
+        "Bambu Lab A1 0.2 nozzle"
-	]
+    ]
-}
+}

resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.4 nozzle.json

@@ -1,20 +1,20 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL A1 0.4 nozzle",
+    "name": "Bambu ASA @BBL A1 0.4 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_09",
+    "setting_id": "GFSB01_09",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1"
+        "1"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"18"
+        "18"
-	],
+    ],
-	"compatible_printers": [
+    "compatible_printers": [
-		"Bambu Lab A1 0.4 nozzle"
+        "Bambu Lab A1 0.4 nozzle"
-	]
+    ]
-}
+}

resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.6 nozzle.json

@@ -1,21 +1,21 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL A1 0.6 nozzle",
+    "name": "Bambu ASA @BBL A1 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_08",
+    "setting_id": "GFSB01_08",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_min_speed": [
+    "fan_min_speed": [
-		"25"
+        "25"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1"
+        "1"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"18"
+        "18"
-	],
+    ],
-	"compatible_printers": [
+    "compatible_printers": [
-		"Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle"
+        "Bambu Lab A1 0.8 nozzle"
-	]
+    ]
-}
+}

resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.2 nozzle.json

@@ -1,201 +1,104 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2C 0.2 nozzle",
+    "name": "Bambu ASA @BBL H2C 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_24",
+    "setting_id": "GFSB01_24",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"counter_coef_2": [
+    "counter_coef_2": [
-		"0.0094"
+        "0.0094"
-	],
+    ],
-	"counter_coef_3": [
+    "counter_coef_3": [
-		"-0.0092"
+        "-0.0092"
-	],
+    ],
-	"counter_limit_max": [
+    "counter_limit_max": [
-		"0.2258"
+        "0.2258"
-	],
+    ],
-	"counter_limit_min": [
+    "counter_limit_min": [
-		"-0.0092"
+        "-0.0092"
-	],
+    ],
-	"filament_change_length": [
+    "filament_change_length": [
-		"4"
+        "4"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "filament_cooling_before_tower": [
-		"10",
+        "10",
-		"10"
+        "10"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"2",
+        "2",
-		"2"
+        "2"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "filament_pre_cooling_temperature_nc": [
-		"230",
+        "230",
-		"230"
+        "230"
-	],
+    ],
-	"filament_prime_volume": [
+    "filament_prime_volume": [
-		"30"
+        "30"
-	],
+    ],
-	"filament_prime_volume_nc": [
+    "filament_prime_volume_nc": [
-		"30"
+        "30"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_ramming_travel_time_nc": [
+    "filament_ramming_travel_time_nc": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"first_x_layer_fan_speed": [
+    "first_x_layer_fan_speed": [
-		"0"
+        "0"
-	],
+    ],
-	"filament_change_length_nc": [
+    "filament_change_length_nc": [
-		"4"
+        "4"
-	],
+    ],
-	"hole_coef_2": [
+    "hole_coef_2": [
-		"0.0013"
+        "0.0013"
-	],
+    ],
-	"hole_coef_3": [
+    "hole_coef_3": [
-		"0.1261"
+        "0.1261"
-	],
+    ],
-	"hole_limit_max": [
+    "hole_limit_max": [
-		"0.1586"
+        "0.1586"
-	],
+    ],
-	"hole_limit_min": [
+    "hole_limit_min": [
-		"0.1261"
+        "0.1261"
-	],
+    ],
-	"filament_preheat_temperature_delta": [
+    "filament_preheat_temperature_delta": [
-		"20",
+        "20",
-		"20"
+        "20"
-	],
+    ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_deretraction_speed": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_extruder_variant": [
+        "270",
-		"Direct Drive Standard",
+        "270"
-		"Direct Drive High Flow"
+    ],
-	],
+    "overhang_fan_speed": [
-	"filament_flush_temp": [
+        "100"
-		"0",
+    ],
-		"0"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_flush_volumetric_speed": [
+        "20"
-		"0",
+    ],
-		"0"
+    "temperature_vitrification": [
-	],
+        "85"
-	"filament_flow_ratio": [
+    ],
-		"0.95",
+    "compatible_printers": [
-		"0.95"
+        "Bambu Lab H2C 0.2 nozzle"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_start_gcode": [
-		"nil",
+        "; filament start gcode\n"
-		"nil"
+    ],
-	],
+    "filament_end_gcode": [
-	"filament_pre_cooling_temperature": [
+        "; filament end gcode \n"
-		"0",
+    ]
-		"0"
+}
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"85"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.6 nozzle.json

@@ -1,198 +1,135 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2C 0.6 nozzle",
+    "name": "Bambu ASA @BBL H2C 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_37",
+    "setting_id": "GFSB01_37",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"counter_coef_2": [
+    "counter_coef_2": [
-		"0.0094"
+        "0.0094"
-	],
+    ],
-	"counter_coef_3": [
+    "counter_coef_3": [
-		"-0.0092"
+        "-0.0092"
-	],
+    ],
-	"counter_limit_max": [
+    "counter_limit_min": [
-		"0.2258"
+        "-0.0092"
-	],
+    ],
-	"counter_limit_min": [
+    "counter_limit_max": [
-		"-0.0092"
+        "0.2258"
-	],
+    ],
-	"filament_change_length": [
+    "filament_cooling_before_tower": [
-		"4"
+        "10",
-	],
+        "10",
-	"filament_cooling_before_tower": [
+        "10"
-		"10",
+    ],
-		"10"
+    "filament_flow_ratio": [
-	],
+        "0.96",
-	"filament_flow_ratio": [
+        "0.96",
-		"0.96",
+        "0.96"
-		"0.96"
+    ],
-	],
+    "filament_max_volumetric_speed": [
-	"filament_max_volumetric_speed": [
+        "25",
-		"25",
+        "30",
-		"30"
+        "25"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "filament_retraction_length": [
-		"230",
+        "0.4",
-		"230"
+        "0.4",
-	],
+        "0.4"
-	"filament_prime_volume": [
+    ],
-		"30"
+    "filament_wipe": [
-	],
+        "1",
-	"filament_prime_volume_nc": [
+        "1",
-		"30"
+        "1"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_wipe_distance": [
-		"0",
+        "1",
-		"0"
+        "1",
-	],
+        "1"
-	"filament_ramming_travel_time_nc": [
+    ],
-		"1",
+    "filament_prime_volume": [
-		"1"
+        "30"
-	],
+    ],
-	"filament_retraction_length": [
+    "filament_prime_volume_nc": [
-		"0.4",
+        "30"
-		"0.4"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_wipe": [
+        "Spiral Lift",
-		"1",
+        "Spiral Lift",
-		"1"
+        "Spiral Lift"
-	],
+    ],
-	"filament_wipe_distance": [
+    "filament_pre_cooling_temperature_nc": [
-		"1",
+        "230",
-		"1"
+        "230",
-	],
+        "230"
-	"filament_z_hop_types": [
+    ],
-		"Spiral Lift",
+    "filament_ramming_travel_time": [
-		"Spiral Lift"
+        "0",
-	],
+        "0",
-	"first_x_layer_fan_speed": [
+        "0"
-		"0"
+    ],
-	],
+    "filament_ramming_travel_time_nc": [
-	"filament_change_length_nc": [
+        "1",
-		"4"
+        "1",
-	],
+        "1"
-	"hole_coef_2": [
+    ],
-		"0.0013"
+    "filament_change_length": [
-	],
+        "4"
-	"hole_coef_3": [
+    ],
-		"0.1261"
+    "filament_change_length_nc": [
-	],
+        "4"
-	"hole_limit_max": [
+    ],
-		"0.1586"
+    "first_x_layer_fan_speed": [
-	],
+        "0"
-	"hole_limit_min": [
+    ],
-		"0.1261"
+    "hole_coef_2": [
-	],
+        "0.0013"
-	"filament_preheat_temperature_delta": [
+    ],
-		"20",
+    "hole_coef_3": [
-		"20"
+        "0.1261"
-	],
+    ],
-	"filament_adaptive_volumetric_speed": [
+    "hole_limit_min": [
-		"0",
+        "0.1261"
-		"0"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_deretraction_speed": [
+        "0.1586"
-		"nil",
+    ],
-		"nil"
+    "filament_preheat_temperature_delta": [
-	],
+        "20",
-	"filament_extruder_variant": [
+        "20",
-		"Direct Drive Standard",
+        "20"
-		"Direct Drive High Flow"
+    ],
-	],
+    "include": [
-	"filament_flush_temp": [
+        "fdm_filament_template_direct_dual_e3d"
-		"0",
+    ],
-		"0"
+    "nozzle_temperature": [
-	],
+        "270",
-	"filament_flush_volumetric_speed": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_long_retractions_when_cut": [
+        "270",
-		"nil",
+        "270",
-		"nil"
+        "270"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "slow_down_min_speed": [
-		"0",
+        "20",
-		"0"
+        "20",
-	],
+        "20"
-	"filament_retract_length_nc": [
+    ],
-		"14",
+    "temperature_vitrification": [
-		"14"
+        "85"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "compatible_printers": [
-		"-1",
+        "Bambu Lab H2C 0.6 nozzle"
-		"-1"
+    ],
-	],
+    "filament_start_gcode": [
-	"filament_ramming_volumetric_speed_nc": [
+        "; filament start gcode\n"
-		"-1",
+    ],
-		"-1"
+    "filament_end_gcode": [
-	],
+        "; filament end gcode \n"
-	"filament_retract_before_wipe": [
+    ]
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"85"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.8 nozzle.json

@@ -1,198 +1,121 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2C 0.8 nozzle",
+    "name": "Bambu ASA @BBL H2C 0.8 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_38",
+    "setting_id": "GFSB01_38",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"counter_coef_2": [
+    "counter_coef_2": [
-		"0.0094"
+        "0.0094"
-	],
+    ],
-	"counter_coef_3": [
+    "counter_coef_3": [
-		"-0.0092"
+        "-0.0092"
-	],
+    ],
-	"counter_limit_max": [
+    "counter_limit_max": [
-		"0.2258"
+        "0.2258"
-	],
+    ],
-	"counter_limit_min": [
+    "counter_limit_min": [
-		"-0.0092"
+        "-0.0092"
-	],
+    ],
-	"filament_change_length": [
+    "filament_change_length": [
-		"4"
+        "4"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "filament_cooling_before_tower": [
-		"10",
+        "10",
-		"10"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_flow_ratio": [
-		"0.96",
+        "0.96",
-		"0.96"
+        "0.96"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"25",
+        "25",
-		"30"
+        "30"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "filament_pre_cooling_temperature_nc": [
-		"230",
+        "230",
-		"230"
+        "230"
-	],
+    ],
-	"filament_prime_volume": [
+    "filament_prime_volume": [
-		"30"
+        "30"
-	],
+    ],
-	"filament_prime_volume_nc": [
+    "filament_prime_volume_nc": [
-		"30"
+        "30"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_ramming_travel_time_nc": [
+    "filament_ramming_travel_time_nc": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_retraction_length": [
+    "filament_retraction_length": [
-		"0.4",
+        "0.4",
-		"0.4"
+        "0.4"
-	],
+    ],
-	"filament_wipe": [
+    "filament_wipe": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_wipe_distance": [
+    "filament_wipe_distance": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_z_hop_types": [
+    "filament_z_hop_types": [
-		"Spiral Lift",
+        "Spiral Lift",
-		"Spiral Lift"
+        "Spiral Lift"
-	],
+    ],
-	"first_x_layer_fan_speed": [
+    "first_x_layer_fan_speed": [
-		"0"
+        "0"
-	],
+    ],
-	"filament_change_length_nc": [
+    "filament_change_length_nc": [
-		"4"
+        "4"
-	],
+    ],
-	"hole_coef_2": [
+    "hole_coef_2": [
-		"0.0013"
+        "0.0013"
-	],
+    ],
-	"hole_coef_3": [
+    "hole_coef_3": [
-		"0.1261"
+        "0.1261"
-	],
+    ],
-	"hole_limit_max": [
+    "hole_limit_max": [
-		"0.1586"
+        "0.1586"
-	],
+    ],
-	"hole_limit_min": [
+    "hole_limit_min": [
-		"0.1261"
+        "0.1261"
-	],
+    ],
-	"filament_preheat_temperature_delta": [
+    "filament_preheat_temperature_delta": [
-		"20",
+        "20",
-		"20"
+        "20"
-	],
+    ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_deretraction_speed": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_extruder_variant": [
+        "270",
-		"Direct Drive Standard",
+        "270"
-		"Direct Drive High Flow"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_flush_temp": [
+        "20",
-		"0",
+        "20"
-		"0"
+    ],
-	],
+    "temperature_vitrification": [
-	"filament_flush_volumetric_speed": [
+        "85"
-		"0",
+    ],
-		"0"
+    "compatible_printers": [
-	],
+        "Bambu Lab H2C 0.8 nozzle"
-	"filament_long_retractions_when_cut": [
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil"
+        "; filament start gcode\n"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "filament_end_gcode": [
-		"0",
+        "; filament end gcode \n"
-		"0"
+    ]
-	],
+}
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"85"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ASA @BBL H2C.json

@@ -1,198 +1,135 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2C",
+    "name": "Bambu ASA @BBL H2C",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_23",
+    "setting_id": "GFSB01_23",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"counter_coef_2": [
+    "counter_coef_2": [
-		"0.0094"
+        "0.0094"
-	],
+    ],
-	"counter_coef_3": [
+    "counter_coef_3": [
-		"-0.0092"
+        "-0.0092"
-	],
+    ],
-	"counter_limit_max": [
+    "counter_limit_min": [
-		"0.2258"
+        "-0.0092"
-	],
+    ],
-	"counter_limit_min": [
+    "counter_limit_max": [
-		"-0.0092"
+        "0.2258"
-	],
+    ],
-	"filament_change_length": [
+    "filament_cooling_before_tower": [
-		"4"
+        "10",
-	],
+        "10",
-	"filament_cooling_before_tower": [
+        "10"
-		"10",
+    ],
-		"10"
+    "filament_flow_ratio": [
-	],
+        "0.96",
-	"filament_flow_ratio": [
+        "0.96",
-		"0.96",
+        "0.96"
-		"0.96"
+    ],
-	],
+    "filament_max_volumetric_speed": [
-	"filament_max_volumetric_speed": [
+        "20",
-		"20",
+        "30",
-		"30"
+        "20"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "filament_retraction_length": [
-		"230",
+        "0.4",
-		"230"
+        "0.6",
-	],
+        "0.4"
-	"filament_prime_volume": [
+    ],
-		"30"
+    "filament_wipe": [
-	],
+        "1",
-	"filament_prime_volume_nc": [
+        "1",
-		"30"
+        "1"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_wipe_distance": [
-		"0",
+        "1",
-		"0"
+        "1",
-	],
+        "1"
-	"filament_ramming_travel_time_nc": [
+    ],
-		"1",
+    "filament_prime_volume": [
-		"1"
+        "30"
-	],
+    ],
-	"filament_retraction_length": [
+    "filament_prime_volume_nc": [
-		"0.4",
+        "30"
-		"0.6"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_wipe": [
+        "Spiral Lift",
-		"1",
+        "Spiral Lift",
-		"1"
+        "Spiral Lift"
-	],
+    ],
-	"filament_wipe_distance": [
+    "filament_pre_cooling_temperature_nc": [
-		"1",
+        "230",
-		"1"
+        "230",
-	],
+        "230"
-	"filament_z_hop_types": [
+    ],
-		"Spiral Lift",
+    "filament_ramming_travel_time": [
-		"Spiral Lift"
+        "0",
-	],
+        "0",
-	"first_x_layer_fan_speed": [
+        "0"
-		"0"
+    ],
-	],
+    "filament_ramming_travel_time_nc": [
-	"filament_change_length_nc": [
+        "1",
-		"4"
+        "1",
-	],
+        "1"
-	"hole_coef_2": [
+    ],
-		"0.0013"
+    "filament_change_length": [
-	],
+        "4"
-	"hole_coef_3": [
+    ],
-		"0.1261"
+    "filament_change_length_nc": [
-	],
+        "4"
-	"hole_limit_max": [
+    ],
-		"0.1586"
+    "first_x_layer_fan_speed": [
-	],
+        "0"
-	"hole_limit_min": [
+    ],
-		"0.1261"
+    "hole_coef_2": [
-	],
+        "0.0013"
-	"filament_preheat_temperature_delta": [
+    ],
-		"20",
+    "hole_coef_3": [
-		"20"
+        "0.1261"
-	],
+    ],
-	"filament_adaptive_volumetric_speed": [
+    "hole_limit_min": [
-		"0",
+        "0.1261"
-		"0"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_deretraction_speed": [
+        "0.1586"
-		"nil",
+    ],
-		"nil"
+    "filament_preheat_temperature_delta": [
-	],
+        "20",
-	"filament_extruder_variant": [
+        "20",
-		"Direct Drive Standard",
+        "20"
-		"Direct Drive High Flow"
+    ],
-	],
+    "include": [
-	"filament_flush_temp": [
+        "fdm_filament_template_direct_dual_e3d"
-		"0",
+    ],
-		"0"
+    "nozzle_temperature": [
-	],
+        "270",
-	"filament_flush_volumetric_speed": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_long_retractions_when_cut": [
+        "270",
-		"nil",
+        "270",
-		"nil"
+        "270"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "slow_down_min_speed": [
-		"0",
+        "20",
-		"0"
+        "20",
-	],
+        "20"
-	"filament_retract_length_nc": [
+    ],
-		"14",
+    "temperature_vitrification": [
-		"14"
+        "85"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "compatible_printers": [
-		"-1",
+        "Bambu Lab H2C 0.4 nozzle"
-		"-1"
+    ],
-	],
+    "filament_start_gcode": [
-	"filament_ramming_volumetric_speed_nc": [
+        "; filament start gcode\n"
-		"-1",
+    ],
-		"-1"
+    "filament_end_gcode": [
-	],
+        "; filament end gcode \n"
-	"filament_retract_before_wipe": [
+    ]
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"85"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.2 nozzle.json

@@ -1,128 +1,77 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2D 0.2 nozzle",
+    "name": "Bambu ASA @BBL H2D 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_12",
+    "setting_id": "GFSB01_12",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
+    ],
-	],
+    "counter_coef_3": [
-	"filament_flow_ratio": [
+        "-0.0092"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_max": [
-	],
+        "0.2258"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "counter_limit_min": [
-		"0"
+        "-0.0092"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"0",
+        "10",
-		"0"
+        "10"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_max_volumetric_speed": [
-		"nil",
+        "2",
-		"nil"
+        "2"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"2",
+        "0",
-		"2"
+        "0"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_prime_volume": [
-		"-1",
+        "30"
-		"-1"
+    ],
-	],
+    "filament_change_length": [
-	"filament_retract_before_wipe": [
+        "4"
-		"nil",
+    ],
-		"nil"
+    "hole_coef_2": [
-	],
+        "0.0013"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "hole_coef_3": [
-		"nil"
+        "0.1261"
-	],
+    ],
-	"filament_retract_when_changing_layer": [
+    "hole_limit_max": [
-		"nil",
+        "0.1586"
-		"nil"
+    ],
-	],
+    "hole_limit_min": [
-	"filament_retraction_distances_when_cut": [
+        "0.1261"
-		"nil",
+    ],
-		"nil"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual"
-	"filament_retraction_length": [
+    ],
-		"nil",
+    "nozzle_temperature": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "nozzle_temperature_initial_layer": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "slow_down_min_speed": [
-		"nil"
+        "20",
-	],
+        "20"
-	"filament_wipe": [
+    ],
-		"nil",
+    "compatible_printers": [
-		"nil"
+        "Bambu Lab H2D 0.2 nozzle"
-	],
+    ],
-	"filament_wipe_distance": [
+    "filament_start_gcode": [
-		"nil",
+        "; filament start gcode\n"
-		"nil"
+    ],
-	],
+    "filament_end_gcode": [
-	"filament_z_hop": [
+        "; filament end gcode \n"
-		"nil",
+    ]
-		"nil"
+}
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.4 nozzle.json

@@ -1,149 +1,103 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2D 0.4 nozzle",
+    "name": "Bambu ASA @BBL H2D 0.4 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_13",
+    "setting_id": "GFSB01_13",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"counter_coef_2": [
+    "counter_coef_2": [
-		"0.007"
+        "0.0094"
-	],
+    ],
-	"counter_coef_3": [
+    "counter_coef_3": [
-		"0.003"
+        "-0.0092"
-	],
+    ],
-	"counter_limit_max": [
+    "counter_limit_max": [
-		"0.1"
+        "0.2258"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "-0.0092"
-		"nil"
+    ],
-	],
+    "filament_change_length": [
-	"filament_flow_ratio": [
+        "4"
-		"0.95",
+    ],
-		"0.95"
+    "filament_cooling_before_tower": [
-	],
+        "10",
-	"filament_flush_temp": [
+        "10",
-		"0",
+        "10"
-		"0"
+    ],
-	],
+    "filament_max_volumetric_speed": [
-	"filament_flush_volumetric_speed": [
+        "20",
-		"0",
+        "35",
-		"0"
+        "20"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_prime_volume": [
-		"nil",
+        "30"
-		"nil"
+    ],
-	],
+    "filament_ramming_travel_time": [
-	"filament_max_volumetric_speed": [
+        "0",
-		"20",
+        "0",
-		"35"
+        "0"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_retraction_length": [
-		"-1",
+        "0.4",
-		"-1"
+        "0.4",
-	],
+        "0.4"
-	"filament_retract_before_wipe": [
+    ],
-		"nil",
+    "filament_wipe": [
-		"nil"
+        "1",
-	],
+        "1",
-	"filament_retract_restart_extra": [
+        "1"
-		"nil",
+    ],
-		"nil"
+    "filament_wipe_distance": [
-	],
+        "1",
-	"filament_retract_when_changing_layer": [
+        "1",
-		"nil",
+        "1"
-		"nil"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_retraction_distances_when_cut": [
+        "Spiral Lift",
-		"nil",
+        "Spiral Lift",
-		"nil"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retraction_length": [
+    "hole_coef_2": [
-		"0.4",
+        "0.0013"
-		"0.4"
+    ],
-	],
+    "hole_coef_3": [
-	"filament_retraction_minimum_travel": [
+        "0.1261"
-		"nil",
+    ],
-		"nil"
+    "hole_limit_max": [
-	],
+        "0.1586"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "hole_limit_min": [
-		"nil"
+        "0.1261"
-	],
+    ],
-	"filament_wipe": [
+    "include": [
-		"1",
+        "fdm_filament_template_direct_dual_e3d"
-		"1"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_wipe_distance": [
+        "270",
-		"1",
+        "270",
-		"1"
+        "270"
-	],
+    ],
-	"filament_z_hop": [
+    "nozzle_temperature_initial_layer": [
-		"nil",
+        "270",
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_z_hop_types": [
+    ],
-		"Spiral Lift",
+    "slow_down_min_speed": [
-		"Spiral Lift"
+        "20",
-	],
+        "20",
-	"filament_extruder_variant": [
+        "20"
-		"Direct Drive Standard",
+    ],
-		"Direct Drive High Flow"
+    "compatible_printers": [
-	],
+        "Bambu Lab H2D 0.4 nozzle"
-	"filament_pre_cooling_temperature": [
+    ],
-		"0",
+    "filament_start_gcode": [
-		"0"
+        "; filament start gcode\n"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_end_gcode": [
-		"0",
+        "; filament end gcode \n"
-		"0"
+    ]
-	],
+}
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.006"
-	],
-	"hole_coef_3": [
-		"0.25"
-	],
-	"hole_limit_min": [
-		"-0.088"
-	],
-	"hole_limit_max": [
-		"0.14"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.6 nozzle.json

@@ -1,128 +1,103 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2D 0.6 nozzle",
+    "name": "Bambu ASA @BBL H2D 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_11",
+    "setting_id": "GFSB01_11",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
+    ],
-	],
+    "counter_coef_3": [
-	"filament_flow_ratio": [
+        "-0.0092"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_max": [
-	],
+        "0.2258"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "counter_limit_min": [
-		"0"
+        "-0.0092"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_change_length": [
-		"0",
+        "4"
-		"0"
+    ],
-	],
+    "filament_cooling_before_tower": [
-	"filament_long_retractions_when_cut": [
+        "10",
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"25",
+        "25",
-		"35"
+        "35",
-	],
+        "25"
-	"filament_ramming_volumetric_speed": [
+    ],
-		"-1",
+    "filament_prime_volume": [
-		"-1"
+        "30"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "filament_retraction_length": [
-		"nil"
+        "0.4",
-	],
+        "0.4",
-	"filament_retract_when_changing_layer": [
+        "0.4"
-		"nil",
+    ],
-		"nil"
+    "filament_wipe": [
-	],
+        "1",
-	"filament_retraction_distances_when_cut": [
+        "1",
-		"nil",
+        "1"
-		"nil"
+    ],
-	],
+    "filament_wipe_distance": [
-	"filament_retraction_length": [
+        "1",
-		"0.4",
+        "1",
-		"0.4"
+        "1"
-	],
+    ],
-	"filament_retraction_minimum_travel": [
+    "filament_z_hop_types": [
-		"nil",
+        "Spiral Lift",
-		"nil"
+        "Spiral Lift",
-	],
+        "Spiral Lift"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "hole_coef_2": [
-		"nil"
+        "0.0013"
-	],
+    ],
-	"filament_wipe": [
+    "hole_coef_3": [
-		"1",
+        "0.1261"
-		"1"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_wipe_distance": [
+        "0.1586"
-		"1",
+    ],
-		"1"
+    "hole_limit_min": [
-	],
+        "0.1261"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "include": [
-		"nil"
+        "fdm_filament_template_direct_dual_e3d"
-	],
+    ],
-	"filament_z_hop_types": [
+    "nozzle_temperature": [
-		"Spiral Lift",
+        "270",
-		"Spiral Lift"
+        "270",
-	],
+        "270"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "nozzle_temperature_initial_layer": [
-		"Direct Drive High Flow"
+        "270",
-	],
+        "270",
-	"filament_pre_cooling_temperature": [
+        "270"
-		"0",
+    ],
-		"0"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_ramming_travel_time": [
+        "20",
-		"0",
+        "20"
-		"0"
+    ],
-	],
+    "compatible_printers": [
-	"filament_adaptive_volumetric_speed": [
+        "Bambu Lab H2D 0.6 nozzle"
-		"0",
+    ],
-		"0"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"long_retractions_when_ec": [
+    ],
-		"1",
+    "filament_end_gcode": [
-		"1"
+        "; filament end gcode \n"
-	],
+    ]
-	"nozzle_temperature": [
+}
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.8 nozzle.json

@@ -1,132 +1,97 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2D 0.8 nozzle",
+    "name": "Bambu ASA @BBL H2D 0.8 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_33",
+    "setting_id": "GFSB01_33",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
+    ],
-	],
+    "counter_coef_3": [
-	"filament_flow_ratio": [
+        "-0.0092"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_max": [
-	],
+        "0.2258"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "counter_limit_min": [
-		"0"
+        "-0.0092"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"0",
+        "10",
-		"0"
+        "10"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_max_volumetric_speed": [
-		"nil",
+        "25",
-		"nil"
+        "35"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_retraction_length": [
-		"25",
+        "0.4",
-		"35"
+        "0.4"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_wipe": [
-		"-1",
+        "1",
-		"-1"
+        "1"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_wipe_distance": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_retract_restart_extra": [
+    "filament_z_hop_types": [
-		"nil",
+        "Spiral Lift",
-		"nil"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retract_when_changing_layer": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_extruder_id": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_retraction_length": [
+    "filament_prime_volume": [
-		"0.4",
+        "30"
-		"0.4"
+    ],
-	],
+    "filament_change_length": [
-	"filament_retraction_minimum_travel": [
+        "4"
-		"nil",
+    ],
-		"nil"
+    "hole_coef_2": [
-	],
+        "0.0013"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "hole_coef_3": [
-		"nil"
+        "0.1261"
-	],
+    ],
-	"filament_wipe": [
+    "hole_limit_max": [
-		"1",
+        "0.1586"
-		"1"
+    ],
-	],
+    "hole_limit_min": [
-	"filament_wipe_distance": [
+        "0.1261"
-		"1",
+    ],
-		"1"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "nozzle_temperature": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_z_hop_types": [
+    ],
-		"Spiral Lift",
+    "nozzle_temperature_initial_layer": [
-		"Spiral Lift"
+        "270",
-	],
+        "270"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "slow_down_min_speed": [
-		"Direct Drive High Flow"
+        "20",
-	],
+        "20"
-	"filament_pre_cooling_temperature": [
+    ],
-		"0",
+    "compatible_printers": [
-		"0"
+        "Bambu Lab H2D 0.8 nozzle"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_start_gcode": [
-		"0",
+        "; filament start gcode\n"
-		"0"
+    ],
-	],
+    "filament_end_gcode": [
-	"filament_adaptive_volumetric_speed": [
+        "; filament end gcode \n"
-		"0",
+    ]
-		"0"
+}
-	],
-	"filament_extruder_id": [
-		"1",
-		"1"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.2 nozzle.json

@@ -1,128 +1,47 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2DP 0.2 nozzle",
+    "name": "Bambu ASA @BBL H2DP 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_18",
+    "setting_id": "GFSB01_18",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "2",
-		"0.95"
+        "2"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_long_retractions_when_cut": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_max_volumetric_speed": [
+        "270",
-		"2",
+        "270"
-		"2"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_ramming_volumetric_speed": [
+        "20",
-		"-1",
+        "20"
-		"-1"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retract_before_wipe": [
+        "Bambu Lab H2D Pro 0.2 nozzle"
-		"nil",
+    ],
-		"nil"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "filament_end_gcode": [
-		"nil"
+        "; filament end gcode \n"
-	],
+    ]
-	"filament_retract_when_changing_layer": [
+}
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.4 nozzle.json

@@ -1,149 +1,84 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2DP 0.4 nozzle",
+    "name": "Bambu ASA @BBL H2DP 0.4 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_19",
+    "setting_id": "GFSB01_19",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"counter_coef_2": [
+    "counter_coef_2": [
-		"0.007"
+        "0.007"
-	],
+    ],
-	"counter_coef_3": [
+    "counter_coef_3": [
-		"0.003"
+        "0.003"
-	],
+    ],
-	"counter_limit_max": [
+    "counter_limit_max": [
-		"0.1"
+        "0.1"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "20",
-		"0.95"
+        "30"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_retraction_length": [
-		"0",
+        "0.4",
-		"0"
+        "0.4"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_wipe": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_wipe_distance": [
-		"20",
+        "1",
-		"30"
+        "1"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_z_hop_types": [
-		"-1",
+        "Spiral Lift",
-		"-1"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "hole_coef_2": [
-		"nil",
+        "-0.006"
-		"nil"
+    ],
-	],
+    "hole_coef_3": [
-	"filament_retract_restart_extra": [
+        "0.25"
-		"nil",
+    ],
-		"nil"
+    "hole_limit_max": [
-	],
+        "0.14"
-	"filament_retract_when_changing_layer": [
+    ],
-		"nil",
+    "hole_limit_min": [
-		"nil"
+        "-0.088"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retraction_length": [
+        "270",
-		"0.4",
+        "270"
-		"0.4"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retraction_minimum_travel": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retraction_speed": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_wipe": [
+        "Bambu Lab H2D Pro 0.4 nozzle"
-		"1",
+    ],
-		"1"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"filament_wipe_distance": [
+    ],
-		"1",
+    "filament_end_gcode": [
-		"1"
+        "; filament end gcode \n"
-	],
+    ]
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.006"
-	],
-	"hole_coef_3": [
-		"0.25"
-	],
-	"hole_limit_min": [
-		"-0.088"
-	],
-	"hole_limit_max": [
-		"0.14"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.6 nozzle.json

@@ -1,128 +1,63 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2DP 0.6 nozzle",
+    "name": "Bambu ASA @BBL H2DP 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_17",
+    "setting_id": "GFSB01_17",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "25",
-		"0.95"
+        "35"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_retraction_length": [
-		"0",
+        "0.4",
-		"0"
+        "0.4"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_wipe": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_wipe_distance": [
-		"25",
+        "1",
-		"35"
+        "1"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_z_hop_types": [
-		"-1",
+        "Spiral Lift",
-		"-1"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retract_restart_extra": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_when_changing_layer": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retraction_distances_when_cut": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retraction_length": [
+        "Bambu Lab H2D Pro 0.6 nozzle"
-		"0.4",
+    ],
-		"0.4"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "filament_end_gcode": [
-		"nil"
+        "; filament end gcode \n"
-	],
+    ]
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.8 nozzle.json

@@ -1,128 +1,63 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2DP 0.8 nozzle",
+    "name": "Bambu ASA @BBL H2DP 0.8 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_34",
+    "setting_id": "GFSB01_34",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "25",
-		"0.95"
+        "35"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_retraction_length": [
-		"0",
+        "0.4",
-		"0"
+        "0.4"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_wipe": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_wipe_distance": [
-		"25",
+        "1",
-		"35"
+        "1"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_z_hop_types": [
-		"-1",
+        "Spiral Lift",
-		"-1"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retract_restart_extra": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_when_changing_layer": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retraction_distances_when_cut": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retraction_length": [
+        "Bambu Lab H2D Pro 0.8 nozzle"
-		"0.4",
+    ],
-		"0.4"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "filament_end_gcode": [
-		"nil"
+        "; filament end gcode \n"
-	],
+    ]
-	"filament_retraction_speed": [
+}
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.2 nozzle.json

@@ -1,134 +1,95 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2S 0.2 nozzle",
+    "name": "Bambu ASA @BBL H2S 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_27",
+    "setting_id": "GFSB01_27",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
+    ],
-	],
+    "counter_coef_3": [
-	"filament_flow_ratio": [
+        "-0.0092"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_min": [
-	],
+        "-0.0092"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "counter_limit_max": [
-		"0"
+        "0.2258"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"3",
+        "10",
-		"3"
+        "10"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_flush_volumetric_speed": [
-		"nil",
+        "3",
-		"nil"
+        "3"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"2",
+        "2",
-		"2"
+        "2"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_prime_volume": [
-		"-1",
+        "30"
-		"-1"
+    ],
-	],
+    "filament_ramming_travel_time": [
-	"filament_retract_before_wipe": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "filament_change_length": [
-	"filament_retract_restart_extra": [
+        "4"
-		"nil",
+    ],
-		"nil"
+    "hole_coef_2": [
-	],
+        "0.0013"
-	"filament_retract_when_changing_layer": [
+    ],
-		"nil",
+    "hole_coef_3": [
-		"nil"
+        "0.1261"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "hole_limit_min": [
-		"nil",
+        "0.1261"
-		"nil"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_retraction_length": [
+        "0.1586"
-		"nil",
+    ],
-		"nil"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "long_retractions_when_ec": [
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "nozzle_temperature": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_wipe": [
+    ],
-		"nil",
+    "nozzle_temperature_initial_layer": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_wipe_distance": [
+    ],
-		"nil",
+    "overhang_fan_speed": [
-		"nil"
+        "100"
-	],
+    ],
-	"filament_z_hop": [
+    "pre_start_fan_time": [
-		"nil",
+        "2"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_z_hop_types": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_extruder_variant": [
+        "20",
-		"Direct Drive Standard",
+        "20"
-		"Direct Drive High Flow"
+    ],
-	],
+    "compatible_printers": [
-	"filament_pre_cooling_temperature": [
+        "Bambu Lab H2S 0.2 nozzle"
-		"0",
+    ],
-		"0"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"filament_ramming_travel_time": [
+    ],
-		"0",
+    "filament_end_gcode": [
-		"0"
+        "; filament end gcode \n"
-	],
+    ]
-	"filament_adaptive_volumetric_speed": [
+}
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.6 nozzle.json

@@ -1,134 +1,119 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2S 0.6 nozzle",
+    "name": "Bambu ASA @BBL H2S 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_36",
+    "setting_id": "GFSB01_36",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
+    ],
-	],
+    "counter_coef_3": [
-	"filament_flow_ratio": [
+        "-0.0092"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_min": [
-	],
+        "-0.0092"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "counter_limit_max": [
-		"0"
+        "0.2258"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_change_length": [
-		"0",
+        "4"
-		"0"
+    ],
-	],
+    "filament_cooling_before_tower": [
-	"filament_long_retractions_when_cut": [
+        "10",
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"25",
+        "25",
-		"35"
+        "35",
-	],
+        "25"
-	"filament_ramming_volumetric_speed": [
+    ],
-		"-1",
+    "filament_prime_volume": [
-		"-1"
+        "30"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_retraction_length": [
-		"nil",
+        "0.4",
-		"nil"
+        "0.4",
-	],
+        "0.4"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "filament_wipe": [
-		"nil"
+        "1",
-	],
+        "1",
-	"filament_retract_when_changing_layer": [
+        "1"
-		"nil",
+    ],
-		"nil"
+    "filament_wipe_distance": [
-	],
+        "1",
-	"filament_retraction_distances_when_cut": [
+        "1",
-		"nil",
+        "1"
-		"nil"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_retraction_length": [
+        "Spiral Lift",
-		"0.4",
+        "Spiral Lift",
-		"0.4"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retraction_minimum_travel": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "hole_coef_2": [
-		"nil"
+        "0.0013"
-	],
+    ],
-	"filament_wipe": [
+    "hole_coef_3": [
-		"1",
+        "0.1261"
-		"1"
+    ],
-	],
+    "hole_limit_min": [
-	"filament_wipe_distance": [
+        "0.1261"
-		"1",
+    ],
-		"1"
+    "hole_limit_max": [
-	],
+        "0.1586"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "include": [
-		"nil"
+        "fdm_filament_template_direct_dual_e3d"
-	],
+    ],
-	"filament_z_hop_types": [
+    "long_retractions_when_ec": [
-		"Spiral Lift",
+        "0",
-		"Spiral Lift"
+        "0",
-	],
+        "0"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "nozzle_temperature": [
-		"Direct Drive High Flow"
+        "270",
-	],
+        "270",
-	"filament_pre_cooling_temperature": [
+        "270"
-		"0",
+    ],
-		"0"
+    "nozzle_temperature_initial_layer": [
-	],
+        "270",
-	"filament_ramming_travel_time": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "overhang_fan_speed": [
-	"filament_adaptive_volumetric_speed": [
+        "100"
-		"0",
+    ],
-		"0"
+    "pre_start_fan_time": [
-	],
+        "2"
-	"long_retractions_when_ec": [
+    ],
-		"0",
+    "retraction_distances_when_ec": [
-		"0"
+        "0",
-	],
+        "0",
-	"nozzle_temperature": [
+        "0"
-		"270",
+    ],
-		"270"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"nozzle_temperature_initial_layer": [
+        "20",
-		"270",
+        "20"
-		"270"
+    ],
-	],
+    "compatible_printers": [
-	"overhang_fan_speed": [
+        "Bambu Lab H2S 0.6 nozzle"
-		"100"
+    ],
-	],
+    "filament_start_gcode": [
-	"pre_start_fan_time": [
+        "; filament start gcode\n"
-		"2"
+    ],
-	],
+    "filament_end_gcode": [
-	"retraction_distances_when_ec": [
+        "; filament end gcode \n"
-		"0",
+    ]
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.8 nozzle.json

@@ -1,134 +1,107 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2S 0.8 nozzle",
+    "name": "Bambu ASA @BBL H2S 0.8 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_35",
+    "setting_id": "GFSB01_35",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
+    ],
-	],
+    "counter_coef_3": [
-	"filament_flow_ratio": [
+        "-0.0092"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_min": [
-	],
+        "-0.0092"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "counter_limit_max": [
-		"0"
+        "0.2258"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"0",
+        "10",
-		"0"
+        "10"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_max_volumetric_speed": [
-		"nil",
+        "25",
-		"nil"
+        "35"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_retraction_length": [
-		"25",
+        "0.4",
-		"35"
+        "0.4"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_wipe": [
-		"-1",
+        "1",
-		"-1"
+        "1"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_wipe_distance": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_retract_restart_extra": [
+    "filament_prime_volume": [
-		"nil",
+        "30"
-		"nil"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_retract_when_changing_layer": [
+        "Spiral Lift",
-		"nil",
+        "Spiral Lift"
-		"nil"
+    ],
-	],
+    "filament_ramming_travel_time": [
-	"filament_retraction_distances_when_cut": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "filament_change_length": [
-	"filament_retraction_length": [
+        "4"
-		"0.4",
+    ],
-		"0.4"
+    "hole_coef_2": [
-	],
+        "0.0013"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "hole_coef_3": [
-		"nil"
+        "0.1261"
-	],
+    ],
-	"filament_retraction_speed": [
+    "hole_limit_min": [
-		"nil",
+        "0.1261"
-		"nil"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_wipe": [
+        "0.1586"
-		"1",
+    ],
-		"1"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual"
-	"filament_wipe_distance": [
+    ],
-		"1",
+    "long_retractions_when_ec": [
-		"1"
+        "0",
-	],
+        "0"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "nozzle_temperature": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_z_hop_types": [
+    ],
-		"Spiral Lift",
+    "nozzle_temperature_initial_layer": [
-		"Spiral Lift"
+        "270",
-	],
+        "270"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "overhang_fan_speed": [
-		"Direct Drive High Flow"
+        "100"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "pre_start_fan_time": [
-		"0",
+        "2"
-		"0"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_ramming_travel_time": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_adaptive_volumetric_speed": [
+        "20",
-		"0",
+        "20"
-		"0"
+    ],
-	],
+    "compatible_printers": [
-	"long_retractions_when_ec": [
+        "Bambu Lab H2S 0.8 nozzle"
-		"0",
+    ],
-		"0"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"nozzle_temperature": [
+    ],
-		"270",
+    "filament_end_gcode": [
-		"270"
+        "; filament end gcode \n"
-	],
+    ]
-	"nozzle_temperature_initial_layer": [
+}
-		"270",
-		"270"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}

resources/profiles/BBL/filament/Bambu ASA @BBL H2S.json

@@ -1,134 +1,119 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2S",
+    "name": "Bambu ASA @BBL H2S",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_26",
+    "setting_id": "GFSB01_26",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
+    ],
-	],
+    "counter_coef_3": [
-	"filament_flow_ratio": [
+        "-0.0092"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_min": [
-	],
+        "-0.0092"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "counter_limit_max": [
-		"0"
+        "0.2258"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_change_length": [
-		"0",
+        "4"
-		"0"
+    ],
-	],
+    "filament_cooling_before_tower": [
-	"filament_long_retractions_when_cut": [
+        "10",
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"20",
+        "20",
-		"35"
+        "35",
-	],
+        "20"
-	"filament_ramming_volumetric_speed": [
+    ],
-		"-1",
+    "filament_prime_volume": [
-		"-1"
+        "30"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_retraction_length": [
-		"nil",
+        "0.4",
-		"nil"
+        "0.4",
-	],
+        "0.4"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "filament_wipe": [
-		"nil"
+        "1",
-	],
+        "1",
-	"filament_retract_when_changing_layer": [
+        "1"
-		"nil",
+    ],
-		"nil"
+    "filament_wipe_distance": [
-	],
+        "1",
-	"filament_retraction_distances_when_cut": [
+        "1",
-		"nil",
+        "1"
-		"nil"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_retraction_length": [
+        "Spiral Lift",
-		"0.4",
+        "Spiral Lift",
-		"0.4"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retraction_minimum_travel": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "hole_coef_2": [
-		"nil"
+        "0.0013"
-	],
+    ],
-	"filament_wipe": [
+    "hole_coef_3": [
-		"1",
+        "0.1261"
-		"1"
+    ],
-	],
+    "hole_limit_min": [
-	"filament_wipe_distance": [
+        "0.1261"
-		"1",
+    ],
-		"1"
+    "hole_limit_max": [
-	],
+        "0.1586"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "include": [
-		"nil"
+        "fdm_filament_template_direct_dual_e3d"
-	],
+    ],
-	"filament_z_hop_types": [
+    "long_retractions_when_ec": [
-		"Spiral Lift",
+        "0",
-		"Spiral Lift"
+        "0",
-	],
+        "0"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "nozzle_temperature": [
-		"Direct Drive High Flow"
+        "270",
-	],
+        "270",
-	"filament_pre_cooling_temperature": [
+        "270"
-		"0",
+    ],
-		"0"
+    "nozzle_temperature_initial_layer": [
-	],
+        "270",
-	"filament_ramming_travel_time": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "overhang_fan_speed": [
-	"filament_adaptive_volumetric_speed": [
+        "100"
-		"0",
+    ],
-		"0"
+    "pre_start_fan_time": [
-	],
+        "2"
-	"long_retractions_when_ec": [
+    ],
-		"0",
+    "retraction_distances_when_ec": [
-		"0"
+        "0",
-	],
+        "0",
-	"nozzle_temperature": [
+        "0"
-		"270",
+    ],
-		"270"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"nozzle_temperature_initial_layer": [
+        "20",
-		"270",
+        "20"
-		"270"
+    ],
-	],
+    "compatible_printers": [
-	"overhang_fan_speed": [
+        "Bambu Lab H2S 0.4 nozzle"
-		"100"
+    ],
-	],
+    "filament_start_gcode": [
-	"pre_start_fan_time": [
+        "; filament start gcode\n"
-		"2"
+    ],
-	],
+    "filament_end_gcode": [
-	"retraction_distances_when_ec": [
+        "; filament end gcode \n"
-		"0",
+    ]
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.2 nozzle.json

@@ -1,192 +1,101 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL P2S 0.2 nozzle",
+    "name": "Bambu ASA @BBL P2S 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_15",
+    "setting_id": "GFSB01_15",
-	"instantiation": "true",
+    "instantiation": "true",
-	"activate_air_filtration": [
+    "activate_air_filtration": [
-		"0"
+        "0"
-	],
+    ],
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"eng_plate_temp": [
+    "counter_coef_2": [
-		"90"
+        "0.0094"
-	],
+    ],
-	"eng_plate_temp_initial_layer": [
+    "counter_coef_3": [
-		"90"
+        "-0.0092"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_limit_max": [
-		"60"
+        "0.2258"
-	],
+    ],
-	"fan_min_speed": [
+    "counter_limit_min": [
-		"30"
+        "-0.0092"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "fan_max_speed": [
-		"nil",
+        "60"
-		"nil"
+    ],
-	],
+    "fan_min_speed": [
-	"filament_flow_ratio": [
+        "30"
-		"0.95",
+    ],
-		"0.95"
+    "filament_cooling_before_tower": [
-	],
+        "10",
-	"filament_flush_temp": [
+        "10"
-		"0",
+    ],
-		"0"
+    "filament_flush_volumetric_speed": [
-	],
+        "3",
-	"filament_flush_volumetric_speed": [
+        "3"
-		"3",
+    ],
-		"3"
+    "filament_max_volumetric_speed": [
-	],
+        "2",
-	"filament_long_retractions_when_cut": [
+        "2"
-		"nil",
+    ],
-		"nil"
+    "filament_ramming_travel_time": [
-	],
+        "0",
-	"filament_max_volumetric_speed": [
+        "0"
-		"2",
+    ],
-		"2"
+    "filament_retraction_distances_when_cut": [
-	],
+        "10",
-	"filament_ramming_volumetric_speed": [
+        "10"
-		"-1",
+    ],
-		"-1"
+    "filament_wipe": [
-	],
+        "1",
-	"filament_ramming_volumetric_speed_nc": [
+        "1"
-		"-1",
+    ],
-		"-1"
+    "filament_wipe_distance": [
-	],
+        "1",
-	"filament_retract_before_wipe": [
+        "1"
-		"nil",
+    ],
-		"nil"
+    "hole_coef_2": [
-	],
+        "0.0013"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "hole_coef_3": [
-		"nil"
+        "0.1261"
-	],
+    ],
-	"filament_retract_when_changing_layer": [
+    "hole_limit_max": [
-		"nil",
+        "0.1586"
-		"nil"
+    ],
-	],
+    "hole_limit_min": [
-	"filament_retraction_distances_when_cut": [
+        "0.1261"
-		"10",
+    ],
-		"10"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual"
-	"filament_retraction_length": [
+    ],
-		"nil",
+    "long_retractions_when_ec": [
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "nozzle_temperature": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "nozzle_temperature_initial_layer": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_wipe": [
+    ],
-		"1",
+    "retraction_distances_when_ec": [
-		"1"
+        "0",
-	],
+        "0"
-	"filament_wipe_distance": [
+    ],
-		"1",
+    "slow_down_min_speed": [
-		"1"
+        "20",
-	],
+        "20"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "compatible_printers": [
-		"nil"
+        "Bambu Lab P2S 0.2 nozzle"
-	],
+    ],
-	"filament_z_hop_types": [
+    "filament_start_gcode": [
-		"nil",
+        "; filament start gcode\n"
-		"nil"
+    ]
-	],
+}
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hot_plate_temp": [
-		"90"
-	],
-	"hot_plate_temp_initial_layer": [
-		"90"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"textured_plate_temp": [
-		"90"
-	],
-	"textured_plate_temp_initial_layer": [
-		"90"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}

resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.4 nozzle.json

@@ -1,186 +1,102 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL P2S 0.4 nozzle",
+    "name": "Bambu ASA @BBL P2S 0.4 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_16",
+    "setting_id": "GFSB01_16",
-	"instantiation": "true",
+    "instantiation": "true",
-	"activate_air_filtration": [
+    "activate_air_filtration": [
-		"0"
+        "0"
-	],
+    ],
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"eng_plate_temp": [
+    "counter_coef_2": [
-		"90"
+        "0.0094"
-	],
+    ],
-	"eng_plate_temp_initial_layer": [
+    "counter_coef_3": [
-		"90"
+        "-0.0092"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "-0.0092"
-		"nil"
+    ],
-	],
+    "counter_limit_max": [
-	"filament_flow_ratio": [
+        "0.2258"
-		"0.95",
+    ],
-		"0.95"
+    "filament_cooling_before_tower": [
-	],
+        "10",
-	"filament_flush_temp": [
+        "10",
-		"0",
+        "10"
-		"0"
+    ],
-	],
+    "filament_max_volumetric_speed": [
-	"filament_flush_volumetric_speed": [
+        "18",
-		"0",
+        "25",
-		"0"
+        "18"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"nil",
+        "10",
-		"nil"
+        "10",
-	],
+        "10"
-	"filament_max_volumetric_speed": [
+    ],
-		"18",
+    "filament_retraction_length": [
-		"25"
+        "0.4",
-	],
+        "0.4",
-	"filament_ramming_volumetric_speed": [
+        "0.4"
-		"-1",
+    ],
-		"-1"
+    "filament_z_hop_types": [
-	],
+        "Spiral Lift",
-	"filament_ramming_volumetric_speed_nc": [
+        "Spiral Lift",
-		"-1",
+        "Spiral Lift"
-		"-1"
+    ],
-	],
+    "filament_ramming_travel_time": [
-	"filament_retract_before_wipe": [
+        "0",
-		"nil",
+        "0",
-		"nil"
+        "0"
-	],
+    ],
-	"filament_retract_restart_extra": [
+    "hole_coef_2": [
-		"nil",
+        "0.0013"
-		"nil"
+    ],
-	],
+    "hole_coef_3": [
-	"filament_retract_when_changing_layer": [
+        "0.1261"
-		"nil",
+    ],
-		"nil"
+    "hole_limit_min": [
-	],
+        "0.1261"
-	"filament_retraction_distances_when_cut": [
+    ],
-		"10",
+    "hole_limit_max": [
-		"10"
+        "0.1586"
-	],
+    ],
-	"filament_retraction_length": [
+    "include": [
-		"0.4",
+        "fdm_filament_template_direct_dual_e3d"
-		"0.4"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_retraction_minimum_travel": [
+        "0",
-		"nil",
+        "0",
-		"nil"
+        "0"
-	],
+    ],
-	"filament_retraction_speed": [
+    "nozzle_temperature": [
-		"nil",
+        "270",
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_wipe": [
+    ],
-		"nil",
+    "nozzle_temperature_initial_layer": [
-		"nil"
+        "270",
-	],
+        "270",
-	"filament_wipe_distance": [
+        "270"
-		"nil",
+    ],
-		"nil"
+    "retraction_distances_when_ec": [
-	],
+        "0",
-	"filament_z_hop": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_z_hop_types": [
+        "20",
-		"Spiral Lift",
+        "20",
-		"Spiral Lift"
+        "20"
-	],
+    ],
-	"filament_extruder_variant": [
+    "compatible_printers": [
-		"Direct Drive Standard",
+        "Bambu Lab P2S 0.4 nozzle"
-		"Direct Drive High Flow"
+    ],
-	],
+    "filament_start_gcode": [
-	"filament_pre_cooling_temperature": [
+        "; filament start gcode\n"
-		"0",
+    ]
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hot_plate_temp": [
-		"90"
-	],
-	"hot_plate_temp_initial_layer": [
-		"90"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"textured_plate_temp": [
-		"90"
-	],
-	"textured_plate_temp_initial_layer": [
-		"90"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.6 nozzle.json

@@ -1,189 +1,115 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL P2S 0.6 nozzle",
+    "name": "Bambu ASA @BBL P2S 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_14",
+    "setting_id": "GFSB01_14",
-	"instantiation": "true",
+    "instantiation": "true",
-	"activate_air_filtration": [
+    "activate_air_filtration": [
-		"0"
+        "0"
-	],
+    ],
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"eng_plate_temp": [
+    "counter_coef_2": [
-		"90"
+        "0.0094"
-	],
+    ],
-	"eng_plate_temp_initial_layer": [
+    "counter_coef_3": [
-		"90"
+        "-0.0092"
-	],
+    ],
-	"fan_min_speed": [
+    "counter_limit_min": [
-		"25"
+        "-0.0092"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_max": [
-		"nil",
+        "0.2258"
-		"nil"
+    ],
-	],
+    "fan_min_speed": [
-	"filament_flow_ratio": [
+        "25"
-		"0.95",
+    ],
-		"0.95"
+    "filament_cooling_before_tower": [
-	],
+        "10",
-	"filament_flush_temp": [
+        "10",
-		"0",
+        "10"
-		"0"
+    ],
-	],
+    "filament_max_volumetric_speed": [
-	"filament_flush_volumetric_speed": [
+        "18",
-		"0",
+        "35",
-		"0"
+        "18"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"nil",
+        "10",
-		"nil"
+        "10",
-	],
+        "10"
-	"filament_max_volumetric_speed": [
+    ],
-		"18",
+    "filament_retraction_length": [
-		"35"
+        "0.4",
-	],
+        "0.4",
-	"filament_ramming_volumetric_speed": [
+        "0.4"
-		"-1",
+    ],
-		"-1"
+    "filament_wipe": [
-	],
+        "1",
-	"filament_ramming_volumetric_speed_nc": [
+        "1",
-		"-1",
+        "1"
-		"-1"
+    ],
-	],
+    "filament_wipe_distance": [
-	"filament_retract_before_wipe": [
+        "1",
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_retract_restart_extra": [
+    "filament_z_hop_types": [
-		"nil",
+        "Spiral Lift",
-		"nil"
+        "Spiral Lift",
-	],
+        "Spiral Lift"
-	"filament_retract_when_changing_layer": [
+    ],
-		"nil",
+    "filament_ramming_travel_time": [
-		"nil"
+        "0",
-	],
+        "0",
-	"filament_retraction_distances_when_cut": [
+        "0"
-		"10",
+    ],
-		"10"
+    "hole_coef_2": [
-	],
+        "0.0013"
-	"filament_retraction_length": [
+    ],
-		"0.4",
+    "hole_coef_3": [
-		"0.4"
+        "0.1261"
-	],
+    ],
-	"filament_retraction_minimum_travel": [
+    "hole_limit_min": [
-		"nil",
+        "0.1261"
-		"nil"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_retraction_speed": [
+        "0.1586"
-		"nil",
+    ],
-		"nil"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual_e3d"
-	"filament_wipe": [
+    ],
-		"1",
+    "long_retractions_when_ec": [
-		"1"
+        "0",
-	],
+        "0",
-	"filament_wipe_distance": [
+        "0"
-		"1",
+    ],
-		"1"
+    "nozzle_temperature": [
-	],
+        "270",
-	"filament_z_hop": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_z_hop_types": [
+        "270",
-		"Spiral Lift",
+        "270",
-		"Spiral Lift"
+        "270"
-	],
+    ],
-	"filament_extruder_variant": [
+    "retraction_distances_when_ec": [
-		"Direct Drive Standard",
+        "0",
-		"Direct Drive High Flow"
+        "0",
-	],
+        "0"
-	"filament_pre_cooling_temperature": [
+    ],
-		"0",
+    "slow_down_min_speed": [
-		"0"
+        "20",
-	],
+        "20",
-	"filament_pre_cooling_temperature_nc": [
+        "20"
-		"0",
+    ],
-		"0"
+    "compatible_printers": [
-	],
+        "Bambu Lab P2S 0.6 nozzle"
-	"filament_ramming_travel_time": [
+    ],
-		"0",
+    "filament_start_gcode": [
-		"0"
+        "; filament start gcode\n"
-	],
+    ]
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hot_plate_temp": [
-		"90"
-	],
-	"hot_plate_temp_initial_layer": [
-		"90"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"textured_plate_temp": [
-		"90"
-	],
-	"textured_plate_temp_initial_layer": [
-		"90"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.8 nozzle.json

@@ -1,186 +1,91 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL P2S 0.8 nozzle",
+    "name": "Bambu ASA @BBL P2S 0.8 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_32",
+    "setting_id": "GFSB01_32",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"eng_plate_temp": [
+    "counter_coef_2": [
-		"90"
+        "0.0094"
-	],
+    ],
-	"eng_plate_temp_initial_layer": [
+    "counter_coef_3": [
-		"90"
+        "-0.0092"
-	],
+    ],
-	"fan_min_speed": [
+    "counter_limit_max": [
-		"25"
+        "0.2258"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "-0.0092"
-		"nil"
+    ],
-	],
+    "fan_min_speed": [
-	"filament_flow_ratio": [
+        "25"
-		"0.95",
+    ],
-		"0.95"
+    "filament_cooling_before_tower": [
-	],
+        "10",
-	"filament_flush_temp": [
+        "10"
-		"0",
+    ],
-		"0"
+    "filament_max_volumetric_speed": [
-	],
+        "18",
-	"filament_flush_volumetric_speed": [
+        "35"
-		"0",
+    ],
-		"0"
+    "filament_ramming_travel_time": [
-	],
+        "0",
-	"filament_long_retractions_when_cut": [
+        "0"
-		"nil",
+    ],
-		"nil"
+    "filament_retraction_distances_when_cut": [
-	],
+        "10",
-	"filament_max_volumetric_speed": [
+        "10"
-		"18",
+    ],
-		"35"
+    "filament_retraction_length": [
-	],
+        "0.4",
-	"filament_ramming_volumetric_speed": [
+        "0.4"
-		"-1",
+    ],
-		"-1"
+    "filament_z_hop_types": [
-	],
+        "Spiral Lift",
-	"filament_ramming_volumetric_speed_nc": [
+        "Spiral Lift"
-		"-1",
+    ],
-		"-1"
+    "hole_coef_2": [
-	],
+        "0.0013"
-	"filament_retract_before_wipe": [
+    ],
-		"nil",
+    "hole_coef_3": [
-		"nil"
+        "0.1261"
-	],
+    ],
-	"filament_retract_restart_extra": [
+    "hole_limit_max": [
-		"nil",
+        "0.1586"
-		"nil"
+    ],
-	],
+    "hole_limit_min": [
-	"filament_retract_when_changing_layer": [
+        "0.1261"
-		"nil",
+    ],
-		"nil"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual"
-	"filament_retraction_distances_when_cut": [
+    ],
-		"10",
+    "long_retractions_when_ec": [
-		"10"
+        "0",
-	],
+        "0"
-	"filament_retraction_length": [
+    ],
-		"0.4",
+    "nozzle_temperature": [
-		"0.4"
+        "270",
-	],
+        "270"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "nozzle_temperature_initial_layer": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "retraction_distances_when_ec": [
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_wipe": [
+    ],
-		"nil",
+    "slow_down_min_speed": [
-		"nil"
+        "20",
-	],
+        "20"
-	"filament_wipe_distance": [
+    ],
-		"nil",
+    "compatible_printers": [
-		"nil"
+        "Bambu Lab P2S 0.8 nozzle"
-	],
+    ],
-	"filament_z_hop": [
+    "filament_start_gcode": [
-		"nil",
+        "; filament start gcode\n"
-		"nil"
+    ]
-	],
+}
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hot_plate_temp": [
-		"90"
-	],
-	"hot_plate_temp_initial_layer": [
-		"90"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"textured_plate_temp": [
-		"90"
-	],
-	"textured_plate_temp_initial_layer": [
-		"90"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}

resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json

@@ -1,119 +1,50 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL X1 0.2 nozzle",
+    "name": "Bambu ASA @BBL X1 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_03",
+    "setting_id": "GFSB01_03",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"2",
+        "2",
-		"2"
+        "2"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"18",
+        "18",
-		"18"
+        "18"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_ramming_travel_time": [
-		"0.95",
+        "0",
-		"0.95"
+        "0"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_flush_temp": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_flush_volumetric_speed": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_ramming_volumetric_speed": [
+        "270",
-		"-1",
+        "270"
-		"-1"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_before_wipe": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retract_restart_extra": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retract_when_changing_layer": [
+        "Bambu Lab X1 0.2 nozzle"
-		"nil",
+    ]
-		"nil"
+}
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 0.2 nozzle"
-	]
-}

resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json

@@ -1,125 +1,60 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL X1 0.6 nozzle",
+    "name": "Bambu ASA @BBL X1 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_04",
+    "setting_id": "GFSB01_04",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_min_speed": [
+    "fan_min_speed": [
-		"25"
+        "25"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_max_volumetric_speed": [
-		"18",
+        "18",
-		"18"
+        "18"
-	],
+    ],
-	"filament_retraction_speed": [
+    "filament_retraction_distances_when_cut": [
-		"0.4",
+        "18",
-		"0.4"
+        "18"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_retraction_speed": [
-		"0.95",
+        "0.4",
-		"0.95"
+        "0.4"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"18",
+        "0",
-		"18"
+        "0"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_flush_temp": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_flush_volumetric_speed": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_ramming_volumetric_speed": [
+        "270",
-		"-1",
+        "270"
-		"-1"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_before_wipe": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retract_restart_extra": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "textured_plate_temp_initial_layer": [
-	"filament_retract_when_changing_layer": [
+        "V"
-		"nil",
+    ],
-		"nil"
+    "compatible_printers": [
-	],
+        "Bambu Lab X1 0.6 nozzle"
-	"filament_retraction_length": [
+    ]
-		"nil",
+}
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"textured_plate_temp_initial_layer": [
-		"V"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 0.6 nozzle"
-	]
-}

resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json

@@ -1,121 +1,52 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL X1C 0.2 nozzle",
+    "name": "Bambu ASA @BBL X1C 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_01",
+    "setting_id": "GFSB01_01",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"2",
+        "2",
-		"2"
+        "2"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"18",
+        "18",
-		"18"
+        "18"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_ramming_travel_time": [
-		"0.95",
+        "0",
-		"0.95"
+        "0"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_flush_temp": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_flush_volumetric_speed": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_ramming_volumetric_speed": [
+        "270",
-		"-1",
+        "270"
-		"-1"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_before_wipe": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retract_restart_extra": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retract_when_changing_layer": [
+        "Bambu Lab X1 Carbon 0.2 nozzle",
-		"nil",
+        "Bambu Lab P1S 0.2 nozzle",
-		"nil"
+        "Bambu Lab P1P 0.2 nozzle"
-	],
+    ]
-	"filament_retraction_length": [
+}
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 Carbon 0.2 nozzle",
-		"Bambu Lab P1S 0.2 nozzle",
-		"Bambu Lab P1P 0.2 nozzle"
-	]
-}

resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json

@@ -1,126 +1,65 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL X1C 0.4 nozzle",
+    "name": "Bambu ASA @BBL X1C 0.4 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_02",
+    "setting_id": "GFSB01_02",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_max_volumetric_speed": [
-		"18",
+        "18",
-		"18"
+        "25"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_retraction_distances_when_cut": [
-		"0.95",
+        "18",
-		"0.95"
+        "18"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_retraction_length": [
-		"18",
+        "nil",
-		"18"
+        "0.4"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_z_hop": [
-		"nil",
+        "nil",
-		"nil"
+        "0.6"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_ramming_volumetric_speed": [
+        "0",
-		"-1",
+        "0"
-		"-1"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retract_before_wipe": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_restart_extra": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_when_changing_layer": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retraction_length": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retraction_minimum_travel": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
-		"nil",
+        "Bambu Lab X1 0.4 nozzle",
-		"nil"
+        "Bambu Lab P1P 0.8 nozzle",
-	],
+        "Bambu Lab P1S 0.4 nozzle",
-	"filament_retraction_speed": [
+        "Bambu Lab P1P 0.4 nozzle"
-		"nil",
+    ]
-		"nil"
+}
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.8 nozzle"
-	]
-}

resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json

@@ -1,127 +1,66 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL X1C",
+    "name": "Bambu ASA @BBL X1C",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_00",
+    "setting_id": "GFSB01_00",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_min_speed": [
+    "fan_min_speed": [
-		"25"
+        "25"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_max_volumetric_speed": [
-		"18",
+        "18",
-		"18"
+        "25"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_retraction_distances_when_cut": [
-		"0.95",
+        "18",
-		"0.95"
+        "18"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_retraction_length": [
-		"18",
+        "nil",
-		"18"
+        "0.4"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_z_hop": [
-		"nil",
+        "nil",
-		"nil"
+        "0.6"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_ramming_volumetric_speed": [
+        "0",
-		"-1",
+        "0"
-		"-1"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retract_before_wipe": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_restart_extra": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_when_changing_layer": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retraction_length": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retraction_minimum_travel": [
+        "Bambu Lab X1 Carbon 0.6 nozzle",
-		"nil",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
-		"nil"
+        "Bambu Lab X1 0.8 nozzle",
-	],
+        "Bambu Lab P1S 0.8 nozzle",
-	"filament_retraction_speed": [
+        "Bambu Lab P1S 0.6 nozzle",
-		"nil",
+        "Bambu Lab P1P 0.6 nozzle"
-		"nil"
+    ]
-	],
+}
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab P1P 0.6 nozzle"
-	]
-}

resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.2 nozzle.json

@@ -1,119 +1,50 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL X1E 0.2 nozzle",
+    "name": "Bambu ASA @BBL X1E 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_06",
+    "setting_id": "GFSB01_06",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_deretraction_speed": [
+    "filament_long_retractions_when_cut": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "2",
-		"0.95"
+        "2"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_retraction_distances_when_cut": [
-		"0",
+        "18",
-		"0"
+        "18"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "include": [
-		"1",
+        "fdm_filament_template_direct_dual"
-		"1"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_max_volumetric_speed": [
+        "0",
-		"2",
+        "0"
-		"2"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_ramming_volumetric_speed": [
+        "270",
-		"-1",
+        "270"
-		"-1"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_before_wipe": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_restart_extra": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retract_when_changing_layer": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retraction_distances_when_cut": [
+        "Bambu Lab X1E 0.2 nozzle"
-		"18",
+    ]
-		"18"
+}
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1E 0.2 nozzle"
-	]
-}

resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.4 nozzle.json

@@ -1,119 +1,50 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL X1E 0.4 nozzle",
+    "name": "Bambu ASA @BBL X1E 0.4 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_07",
+    "setting_id": "GFSB01_07",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_deretraction_speed": [
+    "filament_long_retractions_when_cut": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "18",
-		"0.95"
+        "18"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_retraction_distances_when_cut": [
-		"0",
+        "18",
-		"0"
+        "18"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "include": [
-		"1",
+        "fdm_filament_template_direct_dual"
-		"1"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_max_volumetric_speed": [
+        "0",
-		"18",
+        "0"
-		"18"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_ramming_volumetric_speed": [
+        "270",
-		"-1",
+        "270"
-		"-1"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_before_wipe": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_restart_extra": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retract_when_changing_layer": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retraction_distances_when_cut": [
+        "Bambu Lab X1E 0.4 nozzle"
-		"18",
+    ]
-		"18"
+}
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1E 0.4 nozzle"
-	]
-}