test: bump elegoo profile to test OFL OTA E2E [TO BE REVERTED] (#15954)

Merged by /bot merge on behalf of @peachismomo (id 52488812).
Grants: resources/profiles/OrcaFilamentLibrary/filament/Elegoo, resources/profiles/OrcaFilamentLibrary.json, resources/profiles/Elegoo, resources/profiles/Elegoo.json
Head: d4a18c633e

docs/HLSD/gcode-preview-dragging.md

@@ -1,80 +0,0 @@
-# G-code preview while dragging
-
-The sliced preview draws every toolpath segment of the plate as an instanced box. On a large
-plate that is tens of millions of segments, and the frame is GPU-bound: the cost is the number of
-instances drawn, not anything the CPU does per frame. Dragging the camera over such a plate cannot
-keep up. The `preview_reduced_detail_mode` preference (*Graphics > G-code Preview*, off by
-default) lets the preview draw less while the user drags and put the full toolpaths back when they
-let go.
-
-| Preference | Values | Effect |
-|---|---|---|
-| `preview_reduced_detail_mode` | `off`, `solid`, `shell` | what is drawn while dragging |
-
-libvgcode (`src/libvgcode`) builds and binds the reduced toolpath set, `GCodeViewer` maps the
-preferences onto it and draws the solid model, and `GLCanvas3D` decides when the user is dragging.
-The OpenGL ES path keeps a single set and ignores the preference.
-
-## Two sets, one walk
-
-`ViewerImpl::update_enabled_entities()` walks the visible vertex range once and fills two segment
-index buffers side by side: the **full** set and the **reduced** set (segments and options).
-Building them together is what makes switching free: starting or ending a drag is a buffer
-binding, never a rebuild. A change of mode does rebuild. Nothing is built while the mode
-is off, and the reduced buffers are then uploaded empty so that the last set does not stay
-allocated.
-
-Whatever the mode leaves out, the bottom and top layers of the visible range are kept whole: they
-are the faces the range cuts open, and the top is what the user is looking at.
-
-### Modes
-
-- `EndLayersOnly` (`solid` in the preference) keeps only the two end layers. `GCodeViewer` then
-  draws the sliced objects and the prime tower as opaque solids, see below.
-- `ShellOnly` (`shell`) keeps every role but the sparse infill, internal solid infill, internal
-  bridge infill and gap fill, which lie under the skins or between the walls. Walls, top and
-  bottom surfaces, bridges, supports and the prime tower are drawn whole, so from outside the
-  print looks as it does at rest. The roles come from
-  the slicer, so the classification is exact wherever the slicer's is; what it cannot express is
-  the inside of the prime tower and of a support, which share one role with their outside and are
-  kept whole. A profile with no top or bottom shell layers, or no walls, leaves the infill on the
-  surface, so `GCodeViewer` turns the hiding off for such a print when it loads it, from the
-  print's default region settings; per-object overrides are not consulted.
-
-## The solid model
-
-The preview already loads the sliced objects as shells for its translucent ghost.
-`GCodeViewer::render_solid_model()` draws those shells opaque, in their filament colors, with the
-`gouraud` shader, whose z range cuts them to the visible layer range. The two toolpath layers of
-the reduced set are drawn afterwards and cap the cut with what was really printed there. The
-shells hold only the objects, so while this mode is on the prime tower is added from its sliced
-mesh, positioned as the print placed it. It is added or removed on its own when the mode changes,
-without reloading the objects, keeps its opaque color so that it never appears among the
-translucent shells, and stays out of their bounding box. Supports have no mesh and are not shown,
-and `load_shells()` drops every non-model-part volume, so a negative volume is not cut out.
-
-A plate whose shells are not loaded keeps drawing toolpaths, since the solid model would leave
-only the end layers.
-
-## Deciding that the user is dragging
-
-`GLCanvas3D::_update_preview_interaction()` runs at the top of every preview frame, before the
-canvas decides whether to reuse its cached scene, so that the switch lands in that frame. Dragging
-is `GLCanvas3D::is_user_interacting()`, the same answer the scene cache reads: the camera, the
-navigator, a gizmo, the rectangle selection or either slider being held. A slider reports this from
-ImGui's active id rather than its dirty flag, which is raised and consumed inside one frame. A
-wheel step has no duration, so it holds the reduced set for a 150 ms settle time instead, and the
-frame that restores the toolpaths is scheduled for when that time runs out, since the render timer
-only wakes the idle loop. A drag cut short by focus or capture loss is ended explicitly, and a
-button release wakes the idle loop, because on some platforms nothing else would until the next
-input.
-
-## Reused scene frames
-
-`GLCanvas3D` keeps its last scene pass for frames that only rebuild the overlay (`SceneCache`). Its
-key covers the canvas size, the camera and hover state, not what the toolpath sets draw, so a frame
-that reuses the scene must never be one on which the set is switched.
-`_update_preview_interaction()` therefore reports whether the bound set changed, and a frame on
-which it did redraws the scene. The canvas neither captures nor reuses the scene while the user
-drags, so no reduced frame outlives a drag, and the frame that ends a wheel's settle time is
-requested as a full frame.

resources/profiles/Blocks.json

@@ -1,6 +1,6 @@
 {
 	"name": "Blocks",
-	"version": "02.04.00.04",
+	"version": "02.04.00.13",
 	"force_update": "0",
 	"description": "Blocks configurations",
 	"machine_model_list": [
@@ -43,8 +43,8 @@
 			"sub_path": "process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json"
 		},
 		{
-			"name": "0.20mm Standard 0.4 nozzle @Blocks",
+			"name": "0.20mm Standard 0.4 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.20mm Standard 0.4 nozzle @Blocks.json"
+			"sub_path": "process/0.20mm Standard 0.4 nozzle @Blocks_Pro_S100.json"
 		},
 		{
 			"name": "0.20mm Standard 0.4 nozzle @Blocks_RD50_V2",
@@ -55,8 +55,8 @@
 			"sub_path": "process/0.20mm Standard 0.4 nozzle @Blocks_RF50.json"
 		},
 		{
-			"name": "0.24mm Draft 0.4 nozzle @Blocks",
+			"name": "0.24mm Draft 0.4 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.24mm Draft 0.4 nozzle @Blocks.json"
+			"sub_path": "process/0.24mm Draft 0.4 nozzle @Blocks_Pro_S100.json"
 		},
 		{
 			"name": "0.24mm Draft 0.4 nozzle @Blocks_RD50_V2",
@@ -75,8 +75,8 @@
 			"sub_path": "process/0.28mm Extra Draft 0.4 nozzle @Blocks_RF50.json"
 		},
 		{
-			"name": "0.30mm Extra Draft 0.4 nozzle @Blocks",
+			"name": "0.30mm Extra Draft 0.4 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.30mm Extra Draft 0.4 nozzle @Blocks.json"
+			"sub_path": "process/0.30mm Extra Draft 0.4 nozzle @Blocks_Pro_S100.json"
 		},
 		{
 			"name": "fdm_process_common 0.6 nozzle",
@@ -111,8 +111,8 @@
 			"sub_path": "process/0.26mm Standard 0.6 nozzle @Blocks_RF50.json"
 		},
 		{
-			"name": "0.30mm Standard 0.6 nozzle @Blocks",
+			"name": "0.30mm Standard 0.6 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.30mm Standard 0.6 nozzle @Blocks.json"
+			"sub_path": "process/0.30mm Standard 0.6 nozzle @Blocks_Pro_S100.json"
 		},
 		{
 			"name": "0.32mm Draft 0.6 nozzle @Blocks_RD50_V2",
@@ -131,12 +131,12 @@
 			"sub_path": "process/0.38mm Extra Draft 0.6 nozzle @Blocks_RF50.json"
 		},
 		{
-			"name": "0.40mm Draft 0.6 nozzle @Blocks",
+			"name": "0.40mm Draft 0.6 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.40mm Draft 0.6 nozzle @Blocks.json"
+			"sub_path": "process/0.40mm Draft 0.6 nozzle @Blocks_Pro_S100.json"
 		},
 		{
-			"name": "0.30mm Optimal 0.8 nozzle @Blocks",
+			"name": "0.30mm Optimal 0.8 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.30mm Optimal 0.8 nozzle @Blocks.json"
+			"sub_path": "process/0.30mm Optimal 0.8 nozzle @Blocks_Pro_S100.json"
 		},
 		{
 			"name": "0.30mm Optimal 0.8 nozzle @Blocks_RD50_V2",
@@ -155,8 +155,8 @@
 			"sub_path": "process/0.38mm Standard 0.8 nozzle @Blocks_RF50.json"
 		},
 		{
-			"name": "0.40mm Standard 0.8 nozzle @Blocks",
+			"name": "0.40mm Standard 0.8 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.40mm Standard 0.8 nozzle @Blocks.json"
+			"sub_path": "process/0.40mm Standard 0.8 nozzle @Blocks_Pro_S100.json"
 		},
 		{
 			"name": "0.46mm Draft 0.8 nozzle @Blocks_RD50_V2",
@@ -167,8 +167,8 @@
 			"sub_path": "process/0.46mm Draft 0.8 nozzle @Blocks_RF50.json"
 		},
 		{
-			"name": "0.50mm Draft 0.8 nozzle @Blocks",
+			"name": "0.50mm Draft 0.8 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.50mm Draft 0.8 nozzle @Blocks.json"
+			"sub_path": "process/0.50mm Draft 0.8 nozzle @Blocks_Pro_S100.json"
 		},
 		{
 			"name": "0.54mm Extra Draft 0.8 nozzle @Blocks_RD50_V2",
@@ -179,36 +179,36 @@
 			"sub_path": "process/0.54mm Extra Draft 0.8 nozzle @Blocks_RF50.json"
 		},
 		{
-			"name": "0.30mm Optimal 1.0 nozzle @Blocks",
+			"name": "0.30mm Optimal 1.0 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.30mm Optimal 1.0 nozzle @Blocks.json"
+			"sub_path": "process/0.30mm Optimal 1.0 nozzle @Blocks_Pro_S100.json"
 		},
 		{
-			"name": "0.50mm Standard 1.0 nozzle @Blocks",
+			"name": "0.50mm Standard 1.0 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.50mm Standard 1.0 nozzle @Blocks.json"
+			"sub_path": "process/0.50mm Standard 1.0 nozzle @Blocks_Pro_S100.json"
 		},
 		{
-			"name": "0.60mm Draft 1.0 nozzle @Blocks",
+			"name": "0.60mm Draft 1.0 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.60mm Draft 1.0 nozzle @Blocks.json"
+			"sub_path": "process/0.60mm Draft 1.0 nozzle @Blocks_Pro_S100.json"
 		},
 		{
-			"name": "0.70mm Extra Draft 1.0 nozzle @Blocks",
+			"name": "0.70mm Extra Draft 1.0 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.70mm Extra Draft 1.0 nozzle @Blocks.json"
+			"sub_path": "process/0.70mm Extra Draft 1.0 nozzle @Blocks_Pro_S100.json"
 		},
 		{
-			"name": "0.50mm Optimal 1.2 nozzle @Blocks",
+			"name": "0.50mm Optimal 1.2 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.50mm Optimal 1.2 nozzle @Blocks.json"
+			"sub_path": "process/0.50mm Optimal 1.2 nozzle @Blocks_Pro_S100.json"
 		},
 		{
-			"name": "0.60mm Standard 1.2 nozzle @Blocks",
+			"name": "0.60mm Standard 1.2 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.60mm Standard 1.2 nozzle @Blocks.json"
+			"sub_path": "process/0.60mm Standard 1.2 nozzle @Blocks_Pro_S100.json"
 		},
 		{
-			"name": "0.70mm Draft 1.2 nozzle @Blocks",
+			"name": "0.70mm Draft 1.2 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.70mm Draft 1.2 nozzle @Blocks.json"
+			"sub_path": "process/0.70mm Draft 1.2 nozzle @Blocks_Pro_S100.json"
 		},
 		{
-			"name": "0.80mm Extra Draft 1.2 nozzle @Blocks",
+			"name": "0.80mm Extra Draft 1.2 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.80mm Extra Draft 1.2 nozzle @Blocks.json"
+			"sub_path": "process/0.80mm Extra Draft 1.2 nozzle @Blocks_Pro_S100.json"
 		}
 	],
 	"filament_list": [
@@ -249,48 +249,148 @@
 			"sub_path": "filament/fdm_filament_tpu.json"
 		},
 		{
-			"name": "Generic ABS @Blocks",
+			"name": "Blocks ABS @base",
-			"sub_path": "filament/Generic ABS @Blocks.json"
+			"sub_path": "filament/Blocks ABS @base.json"
 		},
 		{
-			"name": "Generic ASA @Blocks",
+			"name": "Blocks ASA @base",
-			"sub_path": "filament/Generic ASA @Blocks.json"
+			"sub_path": "filament/Blocks ASA @base.json"
 		},
 		{
-			"name": "Generic ASA-CF @Blocks",
+			"name": "Blocks ASA-CF @base",
-			"sub_path": "filament/Generic ASA-CF @Blocks.json"
+			"sub_path": "filament/Blocks ASA-CF @base.json"
 		},
 		{
-			"name": "Generic PA @Blocks",
+			"name": "Blocks PA @base",
-			"sub_path": "filament/Generic PA @Blocks.json"
+			"sub_path": "filament/Blocks PA @base.json"
 		},
 		{
-			"name": "Generic PA-CF @Blocks",
+			"name": "Blocks PA-CF @base",
-			"sub_path": "filament/Generic PA-CF @Blocks.json"
+			"sub_path": "filament/Blocks PA-CF @base.json"
 		},
 		{
-			"name": "Generic PC @Blocks",
+			"name": "Blocks PC @base",
-			"sub_path": "filament/Generic PC @Blocks.json"
+			"sub_path": "filament/Blocks PC @base.json"
 		},
 		{
-			"name": "Generic PETG @Blocks",
+			"name": "Blocks PETG @base",
-			"sub_path": "filament/Generic PETG @Blocks.json"
+			"sub_path": "filament/Blocks PETG @base.json"
 		},
 		{
-			"name": "Generic PLA @Blocks",
+			"name": "Blocks PLA @base",
-			"sub_path": "filament/Generic PLA @Blocks.json"
+			"sub_path": "filament/Blocks PLA @base.json"
 		},
 		{
-			"name": "Generic PLA-CF @Blocks",
+			"name": "Blocks PLA-CF @base",
-			"sub_path": "filament/Generic PLA-CF @Blocks.json"
+			"sub_path": "filament/Blocks PLA-CF @base.json"
 		},
 		{
-			"name": "Generic PVA @Blocks",
+			"name": "Blocks PVA @base",
-			"sub_path": "filament/Generic PVA @Blocks.json"
+			"sub_path": "filament/Blocks PVA @base.json"
 		},
 		{
-			"name": "Generic TPU @Blocks",
+			"name": "Blocks TPU @base",
-			"sub_path": "filament/Generic TPU @Blocks.json"
+			"sub_path": "filament/Blocks TPU @base.json"
+		},
+		{
+			"name": "Blocks ABS @Blocks_RD50_V2",
+			"sub_path": "filament/Blocks ABS @Blocks_RD50_V2.json"
+		},
+		{
+			"name": "Blocks ABS @Blocks_RF50",
+			"sub_path": "filament/Blocks ABS @Blocks_RF50.json"
+		},
+		{
+			"name": "Blocks ASA @Blocks_RD50_V2",
+			"sub_path": "filament/Blocks ASA @Blocks_RD50_V2.json"
+		},
+		{
+			"name": "Blocks ASA @Blocks_RF50",
+			"sub_path": "filament/Blocks ASA @Blocks_RF50.json"
+		},
+		{
+			"name": "Blocks ASA-CF @Blocks_RD50_V2",
+			"sub_path": "filament/Blocks ASA-CF @Blocks_RD50_V2.json"
+		},
+		{
+			"name": "Blocks ASA-CF @Blocks_RF50",
+			"sub_path": "filament/Blocks ASA-CF @Blocks_RF50.json"
+		},
+		{
+			"name": "Blocks PA @Blocks_RD50_V2",
+			"sub_path": "filament/Blocks PA @Blocks_RD50_V2.json"
+		},
+		{
+			"name": "Blocks PA @Blocks_RF50",
+			"sub_path": "filament/Blocks PA @Blocks_RF50.json"
+		},
+		{
+			"name": "Blocks PA-CF @Blocks_RD50_V2",
+			"sub_path": "filament/Blocks PA-CF @Blocks_RD50_V2.json"
+		},
+		{
+			"name": "Blocks PA-CF @Blocks_RF50",
+			"sub_path": "filament/Blocks PA-CF @Blocks_RF50.json"
+		},
+		{
+			"name": "Blocks PC @Blocks_RD50_V2",
+			"sub_path": "filament/Blocks PC @Blocks_RD50_V2.json"
+		},
+		{
+			"name": "Blocks PC @Blocks_RF50",
+			"sub_path": "filament/Blocks PC @Blocks_RF50.json"
+		},
+		{
+			"name": "Blocks PETG @Blocks_Pro_S100",
+			"sub_path": "filament/Blocks PETG @Blocks_Pro_S100.json"
+		},
+		{
+			"name": "Blocks PETG @Blocks_RD50_V2",
+			"sub_path": "filament/Blocks PETG @Blocks_RD50_V2.json"
+		},
+		{
+			"name": "Blocks PETG @Blocks_RF50",
+			"sub_path": "filament/Blocks PETG @Blocks_RF50.json"
+		},
+		{
+			"name": "Blocks PLA @Blocks_Pro_S100",
+			"sub_path": "filament/Blocks PLA @Blocks_Pro_S100.json"
+		},
+		{
+			"name": "Blocks PLA @Blocks_RD50_V2",
+			"sub_path": "filament/Blocks PLA @Blocks_RD50_V2.json"
+		},
+		{
+			"name": "Blocks PLA @Blocks_RF50",
+			"sub_path": "filament/Blocks PLA @Blocks_RF50.json"
+		},
+		{
+			"name": "Blocks PLA-CF @Blocks_RD50_V2",
+			"sub_path": "filament/Blocks PLA-CF @Blocks_RD50_V2.json"
+		},
+		{
+			"name": "Blocks PLA-CF @Blocks_RF50",
+			"sub_path": "filament/Blocks PLA-CF @Blocks_RF50.json"
+		},
+		{
+			"name": "Blocks PVA @Blocks_RD50_V2",
+			"sub_path": "filament/Blocks PVA @Blocks_RD50_V2.json"
+		},
+		{
+			"name": "Blocks PVA @Blocks_RF50",
+			"sub_path": "filament/Blocks PVA @Blocks_RF50.json"
+		},
+		{
+			"name": "Blocks TPU @Blocks_Pro_S100",
+			"sub_path": "filament/Blocks TPU @Blocks_Pro_S100.json"
+		},
+		{
+			"name": "Blocks TPU @Blocks_RD50_V2",
+			"sub_path": "filament/Blocks TPU @Blocks_RD50_V2.json"
+		},
+		{
+			"name": "Blocks TPU @Blocks_RF50",
+			"sub_path": "filament/Blocks TPU @Blocks_RF50.json"
 		}
 	],
 	"machine_list": [

resources/profiles/Blocks/filament/Blocks ABS @Blocks_RD50_V2.json

@@ -0,0 +1,14 @@
+{
+	"type": "filament",
+	"name": "Blocks ABS @Blocks_RD50_V2",
+	"inherits": "Blocks ABS @base",
+	"from": "system",
+	"setting_id": "qhQ0qQDGJgsueCAF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle"
+	],
+	"renamed_from": "Blocks Generic ABS;Generic ABS @Blocks"
+}

resources/profiles/Blocks/filament/Blocks ABS @Blocks_RF50.json

@@ -0,0 +1,13 @@
+{
+	"type": "filament",
+	"name": "Blocks ABS @Blocks_RF50",
+	"inherits": "Blocks ABS @base",
+	"from": "system",
+	"setting_id": "bGYMFFdKiROKuSiY",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
+	]
+}

resources/profiles/Blocks/filament/Blocks ABS @base.json

@@ -1,12 +1,13 @@
 {
 	"type": "filament",
-	"name": "Generic ABS @Blocks",
+	"name": "Blocks ABS @base",
 	"inherits": "fdm_filament_abs",
-	"renamed_from": "Blocks Generic ABS",
 	"from": "system",
-	"setting_id": "TL1Q1kA4t36GGObG",
+	"filament_id": "OFBBhiX8",
-	"filament_id": "OFY9muEs",
+	"instantiation": "false",
-	"instantiation": "true",
+	"filament_vendor": [
+		"Blocks"
+	],
 	"filament_flow_ratio": [
 		"0.95"
 	],
@@ -81,13 +82,5 @@
 	],
 	"during_print_exhaust_fan_speed": [
 		"100"
-	],
-	"compatible_printers": [
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks ASA @Blocks_RD50_V2.json

@@ -0,0 +1,14 @@
+{
+	"type": "filament",
+	"name": "Blocks ASA @Blocks_RD50_V2",
+	"inherits": "Blocks ASA @base",
+	"from": "system",
+	"setting_id": "HW7xDXThvpVFbMq5",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle"
+	],
+	"renamed_from": "Blocks Generic ASA;Generic ASA @Blocks"
+}

resources/profiles/Blocks/filament/Blocks ASA @Blocks_RF50.json

@@ -0,0 +1,13 @@
+{
+	"type": "filament",
+	"name": "Blocks ASA @Blocks_RF50",
+	"inherits": "Blocks ASA @base",
+	"from": "system",
+	"setting_id": "lBW7SCsvawi4icNU",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
+	]
+}

resources/profiles/Blocks/filament/Blocks ASA @base.json

@@ -1,12 +1,13 @@
 {
 	"type": "filament",
-	"name": "Generic ASA @Blocks",
+	"name": "Blocks ASA @base",
 	"inherits": "fdm_filament_asa",
-	"renamed_from": "Blocks Generic ASA",
 	"from": "system",
-	"setting_id": "xP7cB4RHgbm4cYDD",
+	"filament_id": "OFTz2YXa",
-	"filament_id": "OFLPAxz3",
+	"instantiation": "false",
-	"instantiation": "true",
+	"filament_vendor": [
+		"Blocks"
+	],
 	"filament_flow_ratio": [
 		"0.95"
 	],
@@ -81,13 +82,5 @@
 	],
 	"during_print_exhaust_fan_speed": [
 		"100"
-	],
-	"compatible_printers": [
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks ASA-CF @Blocks_RD50_V2.json

@@ -0,0 +1,14 @@
+{
+	"type": "filament",
+	"name": "Blocks ASA-CF @Blocks_RD50_V2",
+	"inherits": "Blocks ASA-CF @base",
+	"from": "system",
+	"setting_id": "x5ksnGLGGy1PgDns",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle"
+	],
+	"renamed_from": "Blocks Generic ASA-CF;Generic ASA-CF @Blocks"
+}

resources/profiles/Blocks/filament/Blocks ASA-CF @Blocks_RF50.json

@@ -0,0 +1,13 @@
+{
+	"type": "filament",
+	"name": "Blocks ASA-CF @Blocks_RF50",
+	"inherits": "Blocks ASA-CF @base",
+	"from": "system",
+	"setting_id": "pcbd5qFiMZAvDPg1",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
+	]
+}

resources/profiles/Blocks/filament/Blocks ASA-CF @base.json

@@ -1,12 +1,13 @@
 {
 	"type": "filament",
-	"name": "Generic ASA-CF @Blocks",
+	"name": "Blocks ASA-CF @base",
 	"inherits": "fdm_filament_asa",
-	"renamed_from": "Blocks Generic ASA-CF",
 	"from": "system",
-	"setting_id": "ju4ue7yJoz3ujny6",
+	"filament_id": "OF8b9I7o",
-	"filament_id": "OF53eLVD",
+	"instantiation": "false",
-	"instantiation": "true",
+	"filament_vendor": [
+		"Blocks"
+	],
 	"filament_type": [
 		"ASA-CF"
 	],
@@ -84,13 +85,5 @@
 	],
 	"during_print_exhaust_fan_speed": [
 		"100"
-	],
-	"compatible_printers": [
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks PA @Blocks_RD50_V2.json

@@ -0,0 +1,14 @@
+{
+	"type": "filament",
+	"name": "Blocks PA @Blocks_RD50_V2",
+	"inherits": "Blocks PA @base",
+	"from": "system",
+	"setting_id": "gxD81n2jjrReLD29",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle"
+	],
+	"renamed_from": "Blocks Generic PA;Generic PA @Blocks"
+}

resources/profiles/Blocks/filament/Blocks PA @Blocks_RF50.json

@@ -0,0 +1,13 @@
+{
+	"type": "filament",
+	"name": "Blocks PA @Blocks_RF50",
+	"inherits": "Blocks PA @base",
+	"from": "system",
+	"setting_id": "PzKxRMDnQUzVWRer",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
+	]
+}

resources/profiles/Blocks/filament/Blocks PA @base.json

@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Blocks PA @base",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"filament_id": "OFidOgK4",
+	"instantiation": "false",
+	"filament_vendor": [
+		"Blocks"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	]
+}

resources/profiles/Blocks/filament/Blocks PA-CF @Blocks_RD50_V2.json

@@ -0,0 +1,14 @@
+{
+	"type": "filament",
+	"name": "Blocks PA-CF @Blocks_RD50_V2",
+	"inherits": "Blocks PA-CF @base",
+	"from": "system",
+	"setting_id": "EtbeKx3rbhUo1TtM",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle"
+	],
+	"renamed_from": "Blocks Generic PA-CF;Generic PA-CF @Blocks"
+}

resources/profiles/Blocks/filament/Blocks PA-CF @Blocks_RF50.json

@@ -0,0 +1,13 @@
+{
+	"type": "filament",
+	"name": "Blocks PA-CF @Blocks_RF50",
+	"inherits": "Blocks PA-CF @base",
+	"from": "system",
+	"setting_id": "udI8Q4X7HaPIaPt4",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
+	]
+}

resources/profiles/Blocks/filament/Blocks PA-CF @base.json

@@ -1,12 +1,13 @@
 {
 	"type": "filament",
-	"name": "Generic PA-CF @Blocks",
+	"name": "Blocks PA-CF @base",
 	"inherits": "fdm_filament_pa",
-	"renamed_from": "Blocks Generic PA-CF",
 	"from": "system",
-	"setting_id": "T6SO0WRdnG6wcyG8",
+	"filament_id": "OFdWrXpL",
-	"filament_id": "OFQLcbps",
+	"instantiation": "false",
-	"instantiation": "true",
+	"filament_vendor": [
+		"Blocks"
+	],
 	"filament_type": [
 		"PA-CF"
 	],
@@ -87,13 +88,5 @@
 	],
 	"during_print_exhaust_fan_speed": [
 		"80"
-	],
-	"compatible_printers": [
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks PC @Blocks_RD50_V2.json

@@ -0,0 +1,14 @@
+{
+	"type": "filament",
+	"name": "Blocks PC @Blocks_RD50_V2",
+	"inherits": "Blocks PC @base",
+	"from": "system",
+	"setting_id": "HLc0shWnKwJzSFyW",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle"
+	],
+	"renamed_from": "Blocks Generic PC;Generic PC @Blocks"
+}

resources/profiles/Blocks/filament/Blocks PC @Blocks_RF50.json

@@ -0,0 +1,13 @@
+{
+	"type": "filament",
+	"name": "Blocks PC @Blocks_RF50",
+	"inherits": "Blocks PC @base",
+	"from": "system",
+	"setting_id": "9a6bccZopMTeNHYu",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
+	]
+}

resources/profiles/Blocks/filament/Blocks PC @base.json

@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Blocks PC @base",
+	"inherits": "fdm_filament_pc",
+	"from": "system",
+	"filament_id": "OFlGY0MN",
+	"instantiation": "false",
+	"filament_vendor": [
+		"Blocks"
+	],
+	"filament_flow_ratio": [
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	]
+}

resources/profiles/Blocks/filament/Blocks PETG @Blocks_Pro_S100.json

@@ -0,0 +1,16 @@
+{
+	"type": "filament",
+	"name": "Blocks PETG @Blocks_Pro_S100",
+	"inherits": "Blocks PETG @base",
+	"from": "system",
+	"setting_id": "AhMR49fcFqtrQ6hI",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS Pro S100 0.4 nozzle",
+		"BLOCKS Pro S100 0.6 nozzle",
+		"BLOCKS Pro S100 0.8 nozzle",
+		"BLOCKS Pro S100 1.0 nozzle",
+		"BLOCKS Pro S100 1.2 nozzle"
+	],
+	"renamed_from": "Blocks Generic PETG;Generic PETG @Blocks"
+}

resources/profiles/Blocks/filament/Blocks PETG @Blocks_RD50_V2.json

@@ -0,0 +1,13 @@
+{
+	"type": "filament",
+	"name": "Blocks PETG @Blocks_RD50_V2",
+	"inherits": "Blocks PETG @base",
+	"from": "system",
+	"setting_id": "3v7ah1zVG8MERPSJ",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle"
+	]
+}

resources/profiles/Blocks/filament/Blocks PETG @Blocks_RF50.json

@@ -0,0 +1,13 @@
+{
+	"type": "filament",
+	"name": "Blocks PETG @Blocks_RF50",
+	"inherits": "Blocks PETG @base",
+	"from": "system",
+	"setting_id": "S7weR19wo9meJ6Yz",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
+	]
+}

resources/profiles/Blocks/filament/Blocks PETG @base.json

@@ -1,12 +1,13 @@
 {
 	"type": "filament",
-	"name": "Generic PETG @Blocks",
+	"name": "Blocks PETG @base",
 	"inherits": "fdm_filament_petg",
-	"renamed_from": "Blocks Generic PETG",
 	"from": "system",
-	"setting_id": "NgzPlYItKHbmGgv3",
+	"filament_id": "OF9t1Ga0",
-	"filament_id": "OFYPdQJh",
+	"instantiation": "false",
-	"instantiation": "true",
+	"filament_vendor": [
+		"Blocks"
+	],
 	"filament_flow_ratio": [
 		"0.94"
 	],
@@ -81,18 +82,5 @@
 	],
 	"slow_down_layer_time": [
 		"5"
-	],
-	"compatible_printers": [
-		"BLOCKS Pro S100 0.4 nozzle",
-		"BLOCKS Pro S100 0.6 nozzle",
-		"BLOCKS Pro S100 0.8 nozzle",
-		"BLOCKS Pro S100 1.0 nozzle",
-		"BLOCKS Pro S100 1.2 nozzle",
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks PLA @Blocks_Pro_S100.json

@@ -0,0 +1,16 @@
+{
+	"type": "filament",
+	"name": "Blocks PLA @Blocks_Pro_S100",
+	"inherits": "Blocks PLA @base",
+	"from": "system",
+	"setting_id": "vWojuLYIfduLGFLL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS Pro S100 0.4 nozzle",
+		"BLOCKS Pro S100 0.6 nozzle",
+		"BLOCKS Pro S100 0.8 nozzle",
+		"BLOCKS Pro S100 1.0 nozzle",
+		"BLOCKS Pro S100 1.2 nozzle"
+	],
+	"renamed_from": "Blocks Generic PLA;Generic PLA @Blocks"
+}

resources/profiles/Blocks/filament/Blocks PLA @Blocks_RD50_V2.json

@@ -0,0 +1,13 @@
+{
+	"type": "filament",
+	"name": "Blocks PLA @Blocks_RD50_V2",
+	"inherits": "Blocks PLA @base",
+	"from": "system",
+	"setting_id": "y7y8NcXNdp17sJUs",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle"
+	]
+}

resources/profiles/Blocks/filament/Blocks PLA @Blocks_RF50.json

@@ -0,0 +1,13 @@
+{
+	"type": "filament",
+	"name": "Blocks PLA @Blocks_RF50",
+	"inherits": "Blocks PLA @base",
+	"from": "system",
+	"setting_id": "jt1MJF4eZzkkscEJ",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
+	]
+}

resources/profiles/Blocks/filament/Blocks PLA @base.json

@@ -1,12 +1,13 @@
 {
 	"type": "filament",
-	"name": "Generic PLA @Blocks",
+	"name": "Blocks PLA @base",
 	"inherits": "fdm_filament_pla",
-	"renamed_from": "Blocks Generic PLA",
 	"from": "system",
-	"setting_id": "kjhuttx4T8OtTNmV",
+	"filament_id": "OFVGAC8g",
-	"filament_id": "OFDSrzZ8",
+	"instantiation": "false",
-	"instantiation": "true",
+	"filament_vendor": [
+		"Blocks"
+	],
 	"filament_flow_ratio": [
 		"0.95"
 	],
@@ -39,18 +40,5 @@
 	],
 	"during_print_exhaust_fan_speed": [
 		"100"
-	],
-	"compatible_printers": [
-		"BLOCKS Pro S100 0.4 nozzle",
-		"BLOCKS Pro S100 0.6 nozzle",
-		"BLOCKS Pro S100 0.8 nozzle",
-		"BLOCKS Pro S100 1.0 nozzle",
-		"BLOCKS Pro S100 1.2 nozzle",
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks PLA-CF @Blocks_RD50_V2.json

@@ -0,0 +1,14 @@
+{
+	"type": "filament",
+	"name": "Blocks PLA-CF @Blocks_RD50_V2",
+	"inherits": "Blocks PLA-CF @base",
+	"from": "system",
+	"setting_id": "lhBtMKP1DmOB3HOI",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle"
+	],
+	"renamed_from": "Blocks Generic PLA-CF;Generic PLA-CF @Blocks"
+}

resources/profiles/Blocks/filament/Blocks PLA-CF @Blocks_RF50.json

@@ -0,0 +1,13 @@
+{
+	"type": "filament",
+	"name": "Blocks PLA-CF @Blocks_RF50",
+	"inherits": "Blocks PLA-CF @base",
+	"from": "system",
+	"setting_id": "6CU83mAyhcZ4FCPI",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
+	]
+}

resources/profiles/Blocks/filament/Blocks PLA-CF @base.json

@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Blocks PLA-CF @base",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"filament_id": "OF6FfwOP",
+	"instantiation": "false",
+	"filament_vendor": [
+		"Blocks"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"20"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"slow_down_layer_time": [
+		"7"
+	]
+}

resources/profiles/Blocks/filament/Blocks PVA @Blocks_RD50_V2.json

@@ -0,0 +1,14 @@
+{
+	"type": "filament",
+	"name": "Blocks PVA @Blocks_RD50_V2",
+	"inherits": "Blocks PVA @base",
+	"from": "system",
+	"setting_id": "hREDqwKF6qyKkakp",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle"
+	],
+	"renamed_from": "Blocks Generic PVA;Generic PVA @Blocks"
+}

resources/profiles/Blocks/filament/Blocks PVA @Blocks_RF50.json

@@ -0,0 +1,13 @@
+{
+	"type": "filament",
+	"name": "Blocks PVA @Blocks_RF50",
+	"inherits": "Blocks PVA @base",
+	"from": "system",
+	"setting_id": "q6pKqHY7Iz4OZaAC",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
+	]
+}

resources/profiles/Blocks/filament/Blocks PVA @base.json

@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Blocks PVA @base",
+	"inherits": "fdm_filament_pva",
+	"from": "system",
+	"filament_id": "OFqcNuE1",
+	"instantiation": "false",
+	"filament_vendor": [
+		"Blocks"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"20"
+	]
+}

resources/profiles/Blocks/filament/Blocks TPU @Blocks_Pro_S100.json

@@ -0,0 +1,16 @@
+{
+	"type": "filament",
+	"name": "Blocks TPU @Blocks_Pro_S100",
+	"inherits": "Blocks TPU @base",
+	"from": "system",
+	"setting_id": "6Rkz2je91JRTRoTi",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS Pro S100 0.4 nozzle",
+		"BLOCKS Pro S100 0.6 nozzle",
+		"BLOCKS Pro S100 0.8 nozzle",
+		"BLOCKS Pro S100 1.0 nozzle",
+		"BLOCKS Pro S100 1.2 nozzle"
+	],
+	"renamed_from": "Blocks Generic TPU;Generic TPU @Blocks"
+}

resources/profiles/Blocks/filament/Blocks TPU @Blocks_RD50_V2.json

@@ -0,0 +1,13 @@
+{
+	"type": "filament",
+	"name": "Blocks TPU @Blocks_RD50_V2",
+	"inherits": "Blocks TPU @base",
+	"from": "system",
+	"setting_id": "mkCqRQTtXldzoEUg",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle"
+	]
+}

resources/profiles/Blocks/filament/Blocks TPU @Blocks_RF50.json

@@ -0,0 +1,13 @@
+{
+	"type": "filament",
+	"name": "Blocks TPU @Blocks_RF50",
+	"inherits": "Blocks TPU @base",
+	"from": "system",
+	"setting_id": "bCCvu5Ow1JkwIrRR",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
+	]
+}

resources/profiles/Blocks/filament/Blocks TPU @base.json

@@ -1,12 +1,13 @@
 {
 	"type": "filament",
-	"name": "Generic TPU @Blocks",
+	"name": "Blocks TPU @base",
 	"inherits": "fdm_filament_tpu",
-	"renamed_from": "Blocks Generic TPU",
 	"from": "system",
-	"setting_id": "6iVYOCZo8ugs4JA0",
+	"filament_id": "OFYnedOZ",
-	"filament_id": "OFgbpcy9",
+	"instantiation": "false",
-	"instantiation": "true",
+	"filament_vendor": [
+		"Blocks"
+	],
 	"filament_max_volumetric_speed": [
 		"4"
 	],
@@ -54,18 +55,5 @@
 	],
 	"during_print_exhaust_fan_speed": [
 		"80"
-	],
-	"compatible_printers": [
-		"BLOCKS Pro S100 0.4 nozzle",
-		"BLOCKS Pro S100 0.6 nozzle",
-		"BLOCKS Pro S100 0.8 nozzle",
-		"BLOCKS Pro S100 1.0 nozzle",
-		"BLOCKS Pro S100 1.2 nozzle",
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Generic PA @Blocks.json

@@ -1,24 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PA @Blocks",
-	"inherits": "fdm_filament_pa",
-	"renamed_from": "Blocks Generic PA",
-	"from": "system",
-	"setting_id": "hL3p8gAeciwDkjNK",
-	"filament_id": "OFg8ndtj",
-	"instantiation": "true",
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"10"
-	],
-	"compatible_printers": [
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
-	]
-}

resources/profiles/Blocks/filament/Generic PC @Blocks.json

@@ -1,24 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PC @Blocks",
-	"inherits": "fdm_filament_pc",
-	"renamed_from": "Blocks Generic PC",
-	"from": "system",
-	"setting_id": "Xhs8PjtmwwVj0ksE",
-	"filament_id": "OFLakOUI",
-	"instantiation": "true",
-	"filament_flow_ratio": [
-		"0.94"
-	],
-	"filament_max_volumetric_speed": [
-		"10"
-	],
-	"compatible_printers": [
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
-	]
-}

resources/profiles/Blocks/filament/Generic PLA-CF @Blocks.json

@@ -1,30 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PLA-CF @Blocks",
-	"inherits": "fdm_filament_pla",
-	"renamed_from": "Blocks Generic PLA-CF",
-	"from": "system",
-	"setting_id": "oKUqzwAWMrpiyGLf",
-	"filament_id": "OFWbdGsC",
-	"instantiation": "true",
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_type": [
-		"PLA-CF"
-	],
-	"slow_down_layer_time": [
-		"7"
-	],
-	"compatible_printers": [
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
-	]
-}

resources/profiles/Blocks/filament/Generic PVA @Blocks.json

@@ -1,24 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PVA @Blocks",
-	"inherits": "fdm_filament_pva",
-	"renamed_from": "Blocks Generic PVA",
-	"from": "system",
-	"setting_id": "tNw3oe7VovLkgUbB",
-	"filament_id": "OFDvXujf",
-	"instantiation": "true",
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"compatible_printers": [
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
-	]
-}

resources/profiles/Blocks/machine/BLOCKS Pro S100 0.4 nozzle.json

@@ -6,7 +6,7 @@
 	"setting_id": "G7HQgaspHXduDM8O",
 	"instantiation": "true",
 	"printer_model": "BLOCKS Pro S100",
-	"default_print_profile": "0.20mm Standard 0.4 nozzle @Blocks",
+	"default_print_profile": "0.20mm Standard 0.4 nozzle @Blocks_Pro_S100",
 	"max_layer_height": [
 		"0.30"
 	],
@@ -25,5 +25,8 @@
 	"printable_height": "900",
 	"upward_compatible_machine": [
 		"BLOCKS Pro S100"
+	],
+	"default_filament_profile": [
+		"Blocks PLA @Blocks_Pro_S100"
 	]
 }

resources/profiles/Blocks/machine/BLOCKS Pro S100 0.6 nozzle.json

@@ -6,7 +6,7 @@
 	"setting_id": "XkWdS210oUMQN17N",
 	"instantiation": "true",
 	"printer_model": "BLOCKS Pro S100",
-	"default_print_profile": "0.30mm Standard 0.6 nozzle @Blocks",
+	"default_print_profile": "0.30mm Standard 0.6 nozzle @Blocks_Pro_S100",
 	"max_layer_height": [
 		"0.50"
 	],
@@ -26,5 +26,8 @@
 	"upward_compatible_machine": [
 		"BLOCKS Pro S100"
 	],
-	"printer_variant": "0.6"
+	"printer_variant": "0.6",
+	"default_filament_profile": [
+		"Blocks PLA @Blocks_Pro_S100"
+	]
 }

resources/profiles/Blocks/machine/BLOCKS Pro S100 0.8 nozzle.json

@@ -6,7 +6,7 @@
 	"setting_id": "I6PdeCS7SbvIlkZf",
 	"instantiation": "true",
 	"printer_model": "BLOCKS Pro S100",
-	"default_print_profile": "0.40mm Standard 0.8 nozzle @Blocks",
+	"default_print_profile": "0.40mm Standard 0.8 nozzle @Blocks_Pro_S100",
 	"max_layer_height": [
 		"0.56"
 	],
@@ -26,5 +26,8 @@
 	"upward_compatible_machine": [
 		"BLOCKS Pro S100"
 	],
-	"printer_variant": "0.8"
+	"printer_variant": "0.8",
+	"default_filament_profile": [
+		"Blocks PLA @Blocks_Pro_S100"
+	]
 }

resources/profiles/Blocks/machine/BLOCKS Pro S100 1.0 nozzle.json

@@ -6,7 +6,7 @@
 	"setting_id": "elLdUyy9RhUoa37o",
 	"instantiation": "true",
 	"printer_model": "BLOCKS Pro S100",
-	"default_print_profile": "0.50mm Standard 1.0 nozzle @Blocks",
+	"default_print_profile": "0.50mm Standard 1.0 nozzle @Blocks_Pro_S100",
 	"max_layer_height": [
 		"0.7"
 	],
@@ -26,5 +26,8 @@
 	"upward_compatible_machine": [
 		"BLOCKS Pro S100"
 	],
-	"printer_variant": "1.0"
+	"printer_variant": "1.0",
+	"default_filament_profile": [
+		"Blocks PLA @Blocks_Pro_S100"
+	]
 }

resources/profiles/Blocks/machine/BLOCKS Pro S100 1.2 nozzle.json

@@ -6,7 +6,7 @@
 	"setting_id": "xtsGSJ4JkbHTPi44",
 	"instantiation": "true",
 	"printer_model": "BLOCKS Pro S100",
-	"default_print_profile": "0.60mm Standard 1.2 nozzle @Blocks",
+	"default_print_profile": "0.60mm Standard 1.2 nozzle @Blocks_Pro_S100",
 	"max_layer_height": [
 		"0.8"
 	],
@@ -26,5 +26,8 @@
 	"upward_compatible_machine": [
 		"BLOCKS Pro S100"
 	],
-	"printer_variant": "1.2"
+	"printer_variant": "1.2",
+	"default_filament_profile": [
+		"Blocks PLA @Blocks_Pro_S100"
+	]
 }

resources/profiles/Blocks/machine/BLOCKS Pro S100.json

@@ -8,5 +8,5 @@
 	"bed_model": "PRO S100 HotBed model.stl",
 	"bed_texture": "PRO S100 HotBed texture.svg",
 	"hotend_model": "BLOCKS PrintCore.stl",
-	"default_materials": "Generic PLA @Blocks;Generic PETG @Blocks;Generic TPU @Blocks"
+	"default_materials": "Blocks PLA @Blocks_Pro_S100;Blocks PETG @Blocks_Pro_S100;Blocks TPU @Blocks_Pro_S100"
 }

resources/profiles/Blocks/machine/BLOCKS RD50 V2 0.4 nozzle.json

@@ -34,5 +34,9 @@
 	"printable_height": "500",
 	"upward_compatible_machine": [
 		"BLOCKS RD50 V2"
+	],
+	"printer_variant": "0.4",
+	"default_filament_profile": [
+		"Blocks PLA @Blocks_RD50_V2"
 	]
 }

resources/profiles/Blocks/machine/BLOCKS RD50 V2 0.6 nozzle.json

@@ -35,5 +35,8 @@
 	"deretraction_speed": [
 		"80"
 	],
-	"printer_variant": "0.6"
+	"printer_variant": "0.6",
+	"default_filament_profile": [
+		"Blocks PLA @Blocks_RD50_V2"
+	]
 }

resources/profiles/Blocks/machine/BLOCKS RD50 V2 0.8 nozzle.json

@@ -35,5 +35,8 @@
 	"deretraction_speed": [
 		"80"
 	],
-	"printer_variant": "0.8"
+	"printer_variant": "0.8",
+	"default_filament_profile": [
+		"Blocks PLA @Blocks_RD50_V2"
+	]
 }

resources/profiles/Blocks/machine/BLOCKS RD50 V2.json

@@ -8,5 +8,5 @@
 	"bed_model": "RD50 V2 HotBed model.stl",
 	"bed_texture": "RD50 V2 HotBed texture.svg",
 	"hotend_model": "BLOCKS PrintCore.stl",
-	"default_materials": "Generic PLA @Blocks;Generic PETG @Blocks;Generic TPU @Blocks"
+	"default_materials": "Blocks PLA @Blocks_RD50_V2;Blocks PETG @Blocks_RD50_V2;Blocks TPU @Blocks_RD50_V2"
 }

resources/profiles/Blocks/machine/BLOCKS RF50 0.4 nozzle.json

@@ -51,7 +51,7 @@
 		"12"
 	],
 	"retraction_length": [
-		"1"
+		"1.2"
 	],
 	"retraction_speed": [
 		"60"
@@ -79,5 +79,10 @@
 	],
 	"retract_before_wipe": [
 		"0"
-	]
+	],
+	"default_filament_profile": [
+		"Blocks PLA @Blocks_RF50"
+	],
+	"support_multi_bed_types": "1",
+	"default_bed_type": "Textured PEI Plate"
 }

resources/profiles/Blocks/machine/BLOCKS RF50 0.6 nozzle.json

@@ -51,7 +51,7 @@
 		"12"
 	],
 	"retraction_length": [
-		"1"
+		"1.2"
 	],
 	"retraction_speed": [
 		"60"
@@ -75,8 +75,8 @@
 		"BLOCKS RF50"
 	],
 	"machine_start_gcode": [
-		"PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer]",
+		"PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer]\n",
-		"SET_PRESSURE_ADVANCE ADVANCE=0.046"
+		"SET_PRESSURE_ADVANCE ADVANCE=0.046\n"
 	],
 	"printer_variant": "0.6",
 	"wipe_distance": [
@@ -84,5 +84,10 @@
 	],
 	"retract_before_wipe": [
 		"0"
-	]
+	],
+	"default_filament_profile": [
+		"Blocks PLA @Blocks_RF50"
+	],
+	"support_multi_bed_types": "1",
+	"default_bed_type": "Textured PEI Plate"
 }

resources/profiles/Blocks/machine/BLOCKS RF50 0.8 nozzle.json

@@ -51,7 +51,7 @@
 		"12"
 	],
 	"retraction_length": [
-		"1"
+		"1.2"
 	],
 	"retraction_speed": [
 		"60"
@@ -80,5 +80,10 @@
 	],
 	"retract_before_wipe": [
 		"0"
-	]
+	],
+	"default_filament_profile": [
+		"Blocks PLA @Blocks_RF50"
+	],
+	"support_multi_bed_types": "1",
+	"default_bed_type": "Textured PEI Plate"
 }

resources/profiles/Blocks/machine/BLOCKS RF50.json

@@ -8,5 +8,6 @@
 	"bed_model": "RF50 HotBed model.stl",
 	"bed_texture": "RF50 HotBed texture.svg",
 	"hotend_model": "BLOCKS PrintCore.stl",
-	"default_materials": "Generic PLA @Blocks;Generic PETG @Blocks;Generic TPU @Blocks"
+	"default_materials": "Blocks PLA @Blocks_RF50;Blocks PETG @Blocks_RF50;Blocks TPU @Blocks_RF50",
+	"not_support_bed_type": "Smooth Cool Plate;Engineering Plate;Textured Cool Plate;Cool Plate (SuperTack)"
 }

resources/profiles/Blocks/machine/fdm_klipper_common.json

@@ -123,9 +123,6 @@
 	"wipe": [
 		"1"
 	],
-	"default_filament_profile": [
-		"Generic PLA @Blocks"
-	],
 	"bed_exclude_area": [
 		"0x0"
 	],

resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RF50.json

@@ -21,7 +21,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_patter": "grid",
+	"sparse_infill_pattern": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,5 +57,7 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1"
+	"elefant_foot_compensation_layers": "1",
+	"skirt_loops": "2",
+	"skirt_type": "perobject"
 }

resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json

@@ -21,7 +21,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_patter": "grid",
+	"sparse_infill_pattern": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,5 +57,7 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1"
+	"elefant_foot_compensation_layers": "1",
+	"skirt_loops": "2",
+	"skirt_type": "perobject"
 }

resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RF50.json

@@ -21,7 +21,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_patter": "grid",
+	"sparse_infill_pattern": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,5 +57,7 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1"
+	"elefant_foot_compensation_layers": "1",
+	"skirt_loops": "2",
+	"skirt_type": "perobject"
 }

resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_Pro_S100.json

@@ -1,14 +1,15 @@
 {
 	"type": "process",
-	"name": "0.20mm Standard 0.4 nozzle @Blocks",
+	"name": "0.20mm Standard 0.4 nozzle @Blocks_Pro_S100",
 	"inherits": "fdm_process_blocks_common",
 	"from": "system",
-	"setting_id": "47aDtVL6E5DVr7Mt",
+	"setting_id": "QSEguMMChNFZsK5H",
 	"instantiation": "true",
 	"layer_height": "0.2",
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "5",
 	"compatible_printers": [
 		"BLOCKS Pro S100 0.4 nozzle"
-	]
+	],
+	"renamed_from": "0.20mm Standard 0.4 nozzle @Blocks"
 }

resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_RF50.json

@@ -25,7 +25,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_patter": "grid",
+	"sparse_infill_pattern": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -61,5 +61,7 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1"
+	"elefant_foot_compensation_layers": "1",
+	"skirt_loops": "2",
+	"skirt_type": "perobject"
 }

resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_Pro_S100.json

@@ -1,14 +1,15 @@
 {
 	"type": "process",
-	"name": "0.24mm Draft 0.4 nozzle @Blocks",
+	"name": "0.24mm Draft 0.4 nozzle @Blocks_Pro_S100",
 	"inherits": "fdm_process_blocks_common",
 	"from": "system",
-	"setting_id": "ETADjxV6ViJQdnHA",
+	"setting_id": "uALfEFHGmup6vBYI",
 	"instantiation": "true",
 	"layer_height": "0.24",
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "5",
 	"compatible_printers": [
 		"BLOCKS Pro S100 0.4 nozzle"
-	]
+	],
+	"renamed_from": "0.24mm Draft 0.4 nozzle @Blocks"
 }

resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_RF50.json

@@ -21,7 +21,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_patter": "grid",
+	"sparse_infill_pattern": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,5 +57,7 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1"
+	"elefant_foot_compensation_layers": "1",
+	"skirt_loops": "2",
+	"skirt_type": "perobject"
 }

resources/profiles/Blocks/process/0.26mm Standard 0.6 nozzle @Blocks_RF50.json

@@ -21,7 +21,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_patter": "grid",
+	"sparse_infill_pattern": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,5 +57,7 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1"
+	"elefant_foot_compensation_layers": "1",
+	"skirt_loops": "2",
+	"skirt_type": "perobject"
 }

resources/profiles/Blocks/process/0.28mm Extra Draft 0.4 nozzle @Blocks_RF50.json

@@ -22,7 +22,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_patter": "grid",
+	"sparse_infill_pattern": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,5 +57,7 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1"
+	"elefant_foot_compensation_layers": "1",
+	"skirt_loops": "2",
+	"skirt_type": "perobject"
 }

resources/profiles/Blocks/process/0.30mm Extra Draft 0.4 nozzle @Blocks_Pro_S100.json

@@ -1,14 +1,15 @@
 {
 	"type": "process",
-	"name": "0.30mm Extra Draft 0.4 nozzle @Blocks",
+	"name": "0.30mm Extra Draft 0.4 nozzle @Blocks_Pro_S100",
 	"inherits": "fdm_process_blocks_common",
 	"from": "system",
-	"setting_id": "UbuICsmppKDsaaZ4",
+	"setting_id": "HYKF5l2OGvpugSQy",
 	"instantiation": "true",
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "4",
 	"layer_height": "0.30",
 	"compatible_printers": [
 		"BLOCKS Pro S100 0.4 nozzle"
-	]
+	],
+	"renamed_from": "0.30mm Extra Draft 0.4 nozzle @Blocks"
 }

resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_Pro_S100.json

@@ -1,14 +1,15 @@
 {
 	"type": "process",
-	"name": "0.30mm Optimal 0.8 nozzle @Blocks",
+	"name": "0.30mm Optimal 0.8 nozzle @Blocks_Pro_S100",
 	"inherits": "fdm_process_common 0.8 nozzle",
 	"from": "system",
-	"setting_id": "YqkYzp5zdH4R5upm",
+	"setting_id": "OUfZvizM5MGnvHfp",
 	"instantiation": "true",
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "3",
 	"layer_height": "0.3",
 	"compatible_printers": [
 		"BLOCKS Pro S100 0.8 nozzle"
-	]
+	],
+	"renamed_from": "0.30mm Optimal 0.8 nozzle @Blocks"
 }

resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_RF50.json

@@ -21,7 +21,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_patter": "grid",
+	"sparse_infill_pattern": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,5 +57,7 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1"
+	"elefant_foot_compensation_layers": "1",
+	"skirt_loops": "2",
+	"skirt_type": "perobject"
 }

resources/profiles/Blocks/process/0.30mm Optimal 1.0 nozzle @Blocks_Pro_S100.json

@@ -1,14 +1,15 @@
 {
 	"type": "process",
-	"name": "0.30mm Optimal 1.0 nozzle @Blocks",
+	"name": "0.30mm Optimal 1.0 nozzle @Blocks_Pro_S100",
 	"inherits": "fdm_process_common 1.0 nozzle",
 	"from": "system",
-	"setting_id": "8pBawPScHkyQu0SW",
+	"setting_id": "HGG9WxKVr89qNFDx",
 	"instantiation": "true",
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"layer_height": "0.30",
 	"compatible_printers": [
 		"BLOCKS Pro S100 1.0 nozzle"
-	]
+	],
+	"renamed_from": "0.30mm Optimal 1.0 nozzle @Blocks"
 }

resources/profiles/Blocks/process/0.30mm Standard 0.6 nozzle @Blocks_Pro_S100.json

@@ -1,14 +1,15 @@
 {
 	"type": "process",
-	"name": "0.30mm Standard 0.6 nozzle @Blocks",
+	"name": "0.30mm Standard 0.6 nozzle @Blocks_Pro_S100",
 	"inherits": "fdm_process_common 0.6 nozzle",
 	"from": "system",
-	"setting_id": "EPI3PAVK9LpJOZWO",
+	"setting_id": "gO2I1YjBl4nf8yzr",
 	"instantiation": "true",
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "3",
 	"layer_height": "0.30",
 	"compatible_printers": [
 		"BLOCKS Pro S100 0.6 nozzle"
-	]
+	],
+	"renamed_from": "0.30mm Standard 0.6 nozzle @Blocks"
 }

resources/profiles/Blocks/process/0.32mm Draft 0.6 nozzle @Blocks_RF50.json

@@ -22,7 +22,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_patter": "grid",
+	"sparse_infill_pattern": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,5 +57,7 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1"
+	"elefant_foot_compensation_layers": "1",
+	"skirt_loops": "2",
+	"skirt_type": "perobject"
 }

resources/profiles/Blocks/process/0.38mm Extra Draft 0.6 nozzle @Blocks_RF50.json

@@ -21,7 +21,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_patter": "grid",
+	"sparse_infill_pattern": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,5 +57,7 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1"
+	"elefant_foot_compensation_layers": "1",
+	"skirt_loops": "2",
+	"skirt_type": "perobject"
 }

resources/profiles/Blocks/process/0.38mm Standard 0.8 nozzle @Blocks_RF50.json

@@ -22,7 +22,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_patter": "grid",
+	"sparse_infill_pattern": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,5 +57,7 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1"
+	"elefant_foot_compensation_layers": "1",
+	"skirt_loops": "2",
+	"skirt_type": "perobject"
 }

resources/profiles/Blocks/process/0.40mm Draft 0.6 nozzle @Blocks_Pro_S100.json

@@ -1,14 +1,15 @@
 {
 	"type": "process",
-	"name": "0.40mm Draft 0.6 nozzle @Blocks",
+	"name": "0.40mm Draft 0.6 nozzle @Blocks_Pro_S100",
 	"inherits": "fdm_process_common 0.6 nozzle",
 	"from": "system",
-	"setting_id": "CShVKoGspbMJNPw8",
+	"setting_id": "OjsLUl1heqv1cevs",
 	"instantiation": "true",
 	"bottom_shell_layers": "2",
 	"top_shell_layers": "2",
 	"layer_height": "0.40",
 	"compatible_printers": [
 		"BLOCKS Pro S100 0.6 nozzle"
-	]
+	],
+	"renamed_from": "0.40mm Draft 0.6 nozzle @Blocks"
 }

resources/profiles/Blocks/process/0.40mm Standard 0.8 nozzle @Blocks_Pro_S100.json

@@ -1,14 +1,15 @@
 {
 	"type": "process",
-	"name": "0.40mm Standard 0.8 nozzle @Blocks",
+	"name": "0.40mm Standard 0.8 nozzle @Blocks_Pro_S100",
 	"inherits": "fdm_process_common 0.8 nozzle",
 	"from": "system",
-	"setting_id": "TSRjmfWaatY7oLJB",
+	"setting_id": "laOTioBGySeudJpl",
 	"instantiation": "true",
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "4",
 	"layer_height": "0.40",
 	"compatible_printers": [
 		"BLOCKS Pro S100 0.8 nozzle"
-	]
+	],
+	"renamed_from": "0.40mm Standard 0.8 nozzle @Blocks"
 }

resources/profiles/Blocks/process/0.46mm Draft 0.8 nozzle @Blocks_RF50.json

@@ -22,7 +22,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_patter": "grid",
+	"sparse_infill_pattern": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,5 +57,7 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1"
+	"elefant_foot_compensation_layers": "1",
+	"skirt_loops": "2",
+	"skirt_type": "perobject"
 }

resources/profiles/Blocks/process/0.50mm Draft 0.8 nozzle @Blocks_Pro_S100.json

@@ -1,14 +1,15 @@
 {
 	"type": "process",
-	"name": "0.50mm Draft 0.8 nozzle @Blocks",
+	"name": "0.50mm Draft 0.8 nozzle @Blocks_Pro_S100",
 	"inherits": "fdm_process_common 0.8 nozzle",
 	"from": "system",
-	"setting_id": "vOtZHrDS88Shmf2m",
+	"setting_id": "oAhgUZdADR7kP87e",
 	"instantiation": "true",
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "4",
 	"layer_height": "0.50",
 	"compatible_printers": [
 		"BLOCKS Pro S100 0.8 nozzle"
-	]
+	],
+	"renamed_from": "0.50mm Draft 0.8 nozzle @Blocks"
 }

resources/profiles/Blocks/process/0.50mm Optimal 1.2 nozzle @Blocks_Pro_S100.json

@@ -1,14 +1,15 @@
 {
 	"type": "process",
-	"name": "0.50mm Optimal 1.2 nozzle @Blocks",
+	"name": "0.50mm Optimal 1.2 nozzle @Blocks_Pro_S100",
 	"inherits": "fdm_process_common 1.2 nozzle",
 	"from": "system",
-	"setting_id": "BKrEAKqDYzdH43wc",
+	"setting_id": "0eqNgX26jemsBfV5",
 	"instantiation": "true",
 	"bottom_shell_layers": "2",
 	"top_shell_layers": "3",
 	"layer_height": "0.50",
 	"compatible_printers": [
 		"BLOCKS Pro S100 1.2 nozzle"
-	]
+	],
+	"renamed_from": "0.50mm Optimal 1.2 nozzle @Blocks"
 }

resources/profiles/Blocks/process/0.50mm Standard 1.0 nozzle @Blocks_Pro_S100.json

@@ -1,14 +1,15 @@
 {
 	"type": "process",
-	"name": "0.50mm Standard 1.0 nozzle @Blocks",
+	"name": "0.50mm Standard 1.0 nozzle @Blocks_Pro_S100",
 	"inherits": "fdm_process_common 1.0 nozzle",
 	"from": "system",
-	"setting_id": "D40iksDm7mFjhSKn",
+	"setting_id": "z1qCW1cEMc4QvBbV",
 	"instantiation": "true",
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "3",
 	"layer_height": "0.50",
 	"compatible_printers": [
 		"BLOCKS Pro S100 1.0 nozzle"
-	]
+	],
+	"renamed_from": "0.50mm Standard 1.0 nozzle @Blocks"
 }

resources/profiles/Blocks/process/0.54mm Extra Draft 0.8 nozzle @Blocks_RF50.json

@@ -21,7 +21,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_patter": "grid",
+	"sparse_infill_pattern": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,5 +57,7 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1"
+	"elefant_foot_compensation_layers": "1",
+	"skirt_loops": "2",
+	"skirt_type": "perobject"
 }

resources/profiles/Blocks/process/0.60mm Draft 1.0 nozzle @Blocks_Pro_S100.json

@@ -1,14 +1,15 @@
 {
 	"type": "process",
-	"name": "0.60mm Draft 1.0 nozzle @Blocks",
+	"name": "0.60mm Draft 1.0 nozzle @Blocks_Pro_S100",
 	"inherits": "fdm_process_common 1.0 nozzle",
 	"from": "system",
-	"setting_id": "UJUe8XCBzZf8NyCL",
+	"setting_id": "gTTgtfG8qb9My3hH",
 	"instantiation": "true",
 	"bottom_shell_layers": "2",
 	"top_shell_layers": "3",
 	"layer_height": "0.60",
 	"compatible_printers": [
 		"BLOCKS Pro S100 1.0 nozzle"
-	]
+	],
+	"renamed_from": "0.60mm Draft 1.0 nozzle @Blocks"
 }

resources/profiles/Blocks/process/0.60mm Standard 1.2 nozzle @Blocks_Pro_S100.json

@@ -1,14 +1,15 @@
 {
 	"type": "process",
-	"name": "0.60mm Standard 1.2 nozzle @Blocks",
+	"name": "0.60mm Standard 1.2 nozzle @Blocks_Pro_S100",
 	"inherits": "fdm_process_common 1.2 nozzle",
 	"from": "system",
-	"setting_id": "PSBFrTykpkytPI2Q",
+	"setting_id": "ApcyToENCIANrI71",
 	"instantiation": "true",
 	"bottom_shell_layers": "2",
 	"top_shell_layers": "3",
 	"layer_height": "0.60",
 	"compatible_printers": [
 		"BLOCKS Pro S100 1.2 nozzle"
-	]
+	],
+	"renamed_from": "0.60mm Standard 1.2 nozzle @Blocks"
 }

resources/profiles/Blocks/process/0.70mm Draft 1.2 nozzle @Blocks_Pro_S100.json

@@ -1,14 +1,15 @@
 {
 	"type": "process",
-	"name": "0.70mm Draft 1.2 nozzle @Blocks",
+	"name": "0.70mm Draft 1.2 nozzle @Blocks_Pro_S100",
 	"inherits": "fdm_process_common 1.2 nozzle",
 	"from": "system",
-	"setting_id": "0ZQ0USGX9SwAKr29",
+	"setting_id": "DEv7X7zaTfxRQmjo",
 	"instantiation": "true",
 	"bottom_shell_layers": "2",
 	"top_shell_layers": "3",
 	"layer_height": "0.70",
 	"compatible_printers": [
 		"BLOCKS Pro S100 1.2 nozzle"
-	]
+	],
+	"renamed_from": "0.70mm Draft 1.2 nozzle @Blocks"
 }

resources/profiles/Blocks/process/0.70mm Extra Draft 1.0 nozzle @Blocks_Pro_S100.json

@@ -1,14 +1,15 @@
 {
 	"type": "process",
-	"name": "0.70mm Extra Draft 1.0 nozzle @Blocks",
+	"name": "0.70mm Extra Draft 1.0 nozzle @Blocks_Pro_S100",
 	"inherits": "fdm_process_common 1.0 nozzle",
 	"from": "system",
-	"setting_id": "69PFmjOVFBOIp3Qg",
+	"setting_id": "nUW7N9dJmTyQT4AG",
 	"instantiation": "true",
 	"bottom_shell_layers": "2",
 	"top_shell_layers": "3",
 	"layer_height": "0.70",
 	"compatible_printers": [
 		"BLOCKS Pro S100 1.0 nozzle"
-	]
+	],
+	"renamed_from": "0.70mm Extra Draft 1.0 nozzle @Blocks"
 }

resources/profiles/Blocks/process/0.80mm Extra Draft 1.2 nozzle @Blocks_Pro_S100.json

@@ -1,14 +1,15 @@
 {
 	"type": "process",
-	"name": "0.80mm Extra Draft 1.2 nozzle @Blocks",
+	"name": "0.80mm Extra Draft 1.2 nozzle @Blocks_Pro_S100",
 	"inherits": "fdm_process_common 1.2 nozzle",
 	"from": "system",
-	"setting_id": "iBwRI5JJewW5HJSv",
+	"setting_id": "JMy62SonRfK0cAdL",
 	"instantiation": "true",
 	"bottom_shell_layers": "2",
 	"top_shell_layers": "2",
 	"layer_height": "0.80",
 	"compatible_printers": [
 		"BLOCKS Pro S100 1.2 nozzle"
-	]
+	],
+	"renamed_from": "0.80mm Extra Draft 1.2 nozzle @Blocks"
 }

resources/profiles/OrcaFilamentLibrary.json

@@ -1,6 +1,6 @@
 {
 	"name": "OrcaFilamentLibrary",
-	"version": "02.04.00.12",
+	"version": "02.04.00.13",
 	"force_update": "0",
 	"description": "Orca Filament Library",
 	"filament_list": [

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA @base.json

@@ -6,7 +6,7 @@
 	"filament_id": "OFvgE0Zh",
 	"instantiation": "false",
 	"fan_cooling_layer_time": [
-		"80"
+		"81"
 	],
 	"fan_min_speed": [
 		"50"

src/libslic3r/AppConfig.cpp

@@ -205,13 +205,6 @@ void AppConfig::set_defaults()
     if (get("seq_top_layer_only").empty())
         set("seq_top_layer_only", "1");
 
-    // what the preview draws while the user drags it
-    {
-        const std::string mode = get("preview_reduced_detail_mode");
-        if (mode != "off" && mode != "solid" && mode != "shell")
-            set("preview_reduced_detail_mode", "off");
-    }
-
     // ORCA: darken the layers the preview layer slider is not scrubbed to
     if (get("preview_dim_previous_layers").empty())
         set_bool("preview_dim_previous_layers", false);

src/libslic3r/CAD/CadDocument.cpp

@@ -2673,10 +2673,10 @@ void CadDocument::apply_feature(TopoDS_Shape& result, bool& have_body,
                 ridge = pipe.Shape();
                 have_ridge = !ridge.IsNull();
             }
+        } catch (const Standard_Failure&) {
+            have_ridge = false; // OCCT failure — on OCCT >= 8 Standard_Failure derives from std::exception, so this handler must come first
         } catch (const std::exception&) {
             have_ridge = false; // fall back to the bare cylinder/bore below
-        } catch (const Standard_Failure&) {
-            have_ridge = false; // OCCT failure (not a std::exception) — must be caught here too
         }
 
         if (f.thread_internal) {

src/libslic3r/CAD/GeometryEngine.cpp

@@ -15,6 +15,8 @@
 #include <TopExp.hxx>
 #include <TopTools.hxx>
 #include <TopTools_IndexedMapOfShape.hxx>
+#include <TopTools_ListOfShape.hxx>
+#include <TopTools_IndexedDataMapOfShapeListOfShape.hxx>
 #include <Poly_Triangulation.hxx>
 #include <gp_Ax2.hxx>
 #include <gp_Dir.hxx>

src/libslic3r/Format/STEP.cpp

@@ -25,6 +25,7 @@
 #include "XCAFDoc_DocumentTool.hxx"
 #include "XCAFDoc_ShapeTool.hxx"
 #include "XCAFApp_Application.hxx"
+#include "TDF_LabelSequence.hxx"
 #include "TopoDS_Solid.hxx"
 #include "TopoDS_Compound.hxx"
 #include "TopoDS_Builder.hxx"

src/libslic3r/GCode.cpp

@@ -7969,6 +7969,20 @@ double GCode::calc_max_volumetric_speed(const double layer_height, const double
     return res;
 }
 
+// ORCA: Overlap at or below which the overhang fan switches on; negative when it does not depend on overlap
+// (Overhang_threshold_none cools every external perimeter).
+static float overhang_fan_overlap_threshold(int overhang_fan_threshold)
+{
+    switch (overhang_fan_threshold) {
+    case (int) Overhang_threshold_1_4: return 0.9f;
+    case (int) Overhang_threshold_2_4: return 0.75f;
+    case (int) Overhang_threshold_3_4: return 0.5f;
+    case (int) Overhang_threshold_4_4: return 0.25f;
+    case (int) Overhang_threshold_bridge: return 0.05f;
+    default: return -1.f;
+    }
+}
+
 std::string GCode::_extrude(const ExtrusionPath &path, std::string description, double speed)
 {
     std::string gcode;
@@ -8311,6 +8325,13 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
             
             ConfigOptionPercents         overhang_overlap_levels({90, 75, 50, 25, 13, 0});
 
+            // ORCA: Lets the path be split where the overhang fan switches, not only where the speed changes.
+            // Bridges and overhang perimeters are cooled regardless of overlap.
+            float fan_overlap_threshold = -1.f;
+            if (FILAMENT_CONFIG(enable_overhang_bridge_fan) && m_enable_cooling_markers && path.role() != erBridgeInfill &&
+                path.role() != erOverhangPerimeter)
+                fan_overlap_threshold = overhang_fan_overlap_threshold(FILAMENT_CONFIG(overhang_fan_threshold));
+
             if (NOZZLE_CONFIG(slowdown_for_curled_perimeters)){
                 ConfigOptionFloatsOrPercents dynamic_overhang_speeds(
                     {FloatOrPercent{100, true},
@@ -8331,7 +8352,8 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
                          FloatOrPercent{NOZZLE_CONFIG(overhang_4_4_speed).get_abs_value(ref_speed) * 100 / ref_speed, true}});
 
                 new_points = m_extrusion_quality_estimator.estimate_extrusion_quality(path, overhang_overlap_levels, dynamic_overhang_speeds,
-                                                                              ref_speed, speed, NOZZLE_CONFIG(slowdown_for_curled_perimeters));
+                                                                              ref_speed, speed, NOZZLE_CONFIG(slowdown_for_curled_perimeters),
+                                                                              fan_overlap_threshold);
         	}else{
                 ConfigOptionFloatsOrPercents dynamic_overhang_speeds(
                                                                      {FloatOrPercent{100, true},
@@ -8350,7 +8372,8 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
                      FloatOrPercent{NOZZLE_CONFIG(bridge_speed) * 100 / ref_speed, true}});
 
                 new_points = m_extrusion_quality_estimator.estimate_extrusion_quality(path, overhang_overlap_levels, dynamic_overhang_speeds,
-                                                                              ref_speed, speed, NOZZLE_CONFIG(slowdown_for_curled_perimeters));
+                                                                              ref_speed, speed, NOZZLE_CONFIG(slowdown_for_curled_perimeters),
+                                                                              fan_overlap_threshold);
             }
             variable_speed = std::any_of(new_points.begin(), new_points.end(),
                                          [speed](const ProcessedPoint &p) { return fabs(double(p.speed) - speed) > 1; }); // Ignore small speed variations (under 1mm/sec)
@@ -8502,28 +8525,10 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
       if (role == erBridgeInfill || role == erOverhangPerimeter) { // ORCA: Split out bridge infill to internal and external to apply separate fan settings
         return true;
       }
-      switch (overhang_fan_threshold) {
+      if (overhang_fan_threshold == Overhang_threshold_none)
-      case (int)Overhang_threshold_1_4:
-        return overlap <= 0.9f;
-        break;
-      case (int)Overhang_threshold_2_4:
-        return overlap <= 0.75f;
-        break;
-      case (int)Overhang_threshold_3_4:
-        return overlap <= 0.5f;
-        break;
-      case (int)Overhang_threshold_4_4:
-        return overlap <= 0.25f;
-        break;
-      case (int)Overhang_threshold_bridge:
-        return overlap <= 0.05f;
-        break;
-      case (int)Overhang_threshold_none:
         return is_external_perimeter(role);
-        break;
+      const float overlap_threshold = overhang_fan_overlap_threshold(overhang_fan_threshold);
-      default:
+      return overlap_threshold >= 0.f && overlap <= overlap_threshold;
-        return false;
-      }
     };
 
     std::string comment;

src/libslic3r/GCode/ExtrusionProcessor.hpp

@@ -41,10 +41,12 @@ std::vector<ExtendedPoint<L::Dim>> estimate_points_properties(const POINTS&
                                                               float                                   flow_width,
                                                               float                                   max_line_length = -1.0f,
                                                               float                                   min_distance    = -1.0f,
-                                                              // Maps an overhang distance onto the speed it will be printed at. Interior sampling
+                                                              // Speed an overhang distance prints at. Without it, interior sampling
-                                                              // needs it to tell which of the points it could add would change the G-code, and is
+                                                              // is skipped and every line over 4mm is split.
-                                                              // skipped without it.
+                                                              const std::function<float(float)>&      distance_to_speed = {},
-                                                              const std::function<float(float)>&      distance_to_speed = {})
+                                                              // Overlap (1 - distance / flow_width) at or below which the overhang
+                                                              // fan switches on; negative when the fan does not depend on overlap.
+                                                              float                                   fan_overlap_threshold = -1.0f)
 {
     bool   looped     = input_points.front() == input_points.back();
     std::function<size_t(size_t,size_t)> get_prev_index = [](size_t idx, size_t count) {
@@ -125,29 +127,43 @@ std::vector<ExtendedPoint<L::Dim>> estimate_points_properties(const POINTS&
         points.push_back(next_point);
     }
 
+    // ORCA: How an overhang distance prints, which is what the passes below compare. A segment is printed at the lower
+    // of the speeds at its two ends, and with the overhang fan on if the overlap at either end turns it on. A point
+    // added to a path can therefore only change the G-code where it prints at a different speed or fan state from the
+    // points either side of it, and the passes below add points there and nowhere else.
+    const float width_inv = 1.f / flow_width;
+    // Whether an overhang distance turns the overhang fan on. The overlap test check_overhang_fan applies in GCode.cpp.
+    auto fan_on = [fan_overlap_threshold, width_inv](float distance) {
+        return fan_overlap_threshold >= 0.f && 1.f - distance * width_inv <= fan_overlap_threshold;
+    };
+    // Whether two overhang distances are interchangeable ie have the same speed (beyond a 1mm/sec threshold that gcode.cpp filters out on) 
+    // and the same fan state.
+    auto same_speed_and_fan = [&distance_to_speed, &fan_on](float a, float b) {
+        return std::abs(distance_to_speed(a) - distance_to_speed(b)) <= 1.f && fan_on(a) == fan_on(b);
+    };
+    // Whether the first overhang distance prints slower than the second, beyond the 1mm/sec gcode.cpp tolerance, or turns the overhang
+    // fan on where the second does not. Against a supported point (overhang distance 0) it tells whether an end is
+    // affected by the overhang.
+    auto slower_or_cooled = [&distance_to_speed, &fan_on](float a, float b) {
+        return distance_to_speed(a) < distance_to_speed(b) - 1.f || (fan_on(a) && !fan_on(b));
+    };
+
     // ORCA: Interior sampling
-    // The passes below infer the support under a span from its endpoints alone, so an interior that is supported
+    // The passes below infer the support under a span from its endpoints alone, so a part that is supported
-    // differently from both ends is invisible to them: the outer perimeter of an overhang whose ends are caged by
+    // differently from both ends is invisible to them. The outer perimeter of an overhang whose ends are supported by
-    // full height walls reads as supported along its whole length. Probe the interior, keep the samples the
+    // reads as supported along its whole length. Probe the interior, keep the samples the endpoint interpolation fails to predict, 
-    // endpoint interpolation fails to predict, and bisect either side of each one, so a span that is only partly
+    // and bisect either side of each one, so a span that is only partly unsupported gets points where its support actually changes 
-    // unsupported gets points where its support actually changes instead of one reading spread across all of it.
+    // instead of one reading being spread across all of it.
-    if (PREV_LAYER_BOUNDARY_OFFSET && ADD_INTERSECTIONS && min_distance > 0 && distance_to_speed) {
+    // Skipped where there is nothing to find: min_distance <= 0 when no overhang can slow this path down, and
+    // fan_overlap_threshold < 0 when no overhang switches the fan on. It also needs distance_to_speed to tell which of
+    // the points it could add would change the G-code.
+    if (PREV_LAYER_BOUNDARY_OFFSET && ADD_INTERSECTIONS && distance_to_speed && (min_distance > 0 || fan_overlap_threshold >= 0.f)) {
         // Probe at least this densely before treating matching samples as evidence that a span is uniform. The
         // segmentation pass below only splits lines of 2mm or more, and every pass here drops points closer
-        // together than min_spacing, so finer discovery would not produce a more precise speed transition.
+        // together than min_spacing, so finer discovery would not produce a more precise transition.
         const double max_probe_spacing = std::max(2., 4. * min_spacing);
         // A backstop for that length test, which on a non-finite length would never be met.
         constexpr int max_bisection_depth = 10;
-        // Whether two readings are interchangeable. A segment is printed at the lower of the speeds its ends
-        // read, so a sample that agrees on speed with what is already known cannot change the G-code, whatever
-        // its distance says. The distances themselves are far too coarse a stand-in for this: the speed sections
-        // interpolate, so readings a small fraction of min_distance apart can still be tens of mm/s apart.
-        // The tolerance matches the one GCode.cpp applies when it decides a path has a variable speed at all.
-        auto same_speed = [&distance_to_speed](float a, float b) {
-            return std::abs(distance_to_speed(a) - distance_to_speed(b)) <= 1.f;
-        };
-        // Whether the first reading is printed slower than the second, once they are known to differ.
-        auto prints_slower = [&distance_to_speed](float a, float b) { return distance_to_speed(a) < distance_to_speed(b); };
 
         // Part of a segment still to bisect: its positions along the segment and bisections left.
         struct Subspan { double t0, t1; int depth; };
@@ -185,8 +201,8 @@ std::vector<ExtendedPoint<L::Dim>> estimate_points_properties(const POINTS&
             if (!interior.empty()) {
                 std::sort(interior.begin(), interior.end(),
                           [](const std::pair<double, float>& l, const std::pair<double, float>& r) { return l.first < r.first; });
-                // Coarse probing keeps every sample it took until this pass can see which ones bracket a speed
+                // Coarse probing keeps every sample it took until this pass can see which ones bracket a speed or
-                // transition. Matching samples cannot be discarded during discovery: one may be the last
+                // fan transition. Matching samples cannot be discarded during discovery: one may be the last
                 // supported point before a narrow unsupported pocket found by a later probe.
                 size_t kept = 0;
                 for (size_t i = 0; i < interior.size(); ++i) {
@@ -195,15 +211,15 @@ std::vector<ExtendedPoint<L::Dim>> estimate_points_properties(const POINTS&
                     const bool  at_end    = i + 1 == interior.size();      // And nothing follows the last sample but the segment's end
                     const float before    = at_start ? curr.distance : interior[kept - 1].second;
                     const float after     = at_end ? next.distance : interior[i + 1].second;
-                    // A sample is worth a point in the path only where it prints at a different speed from the
+                    // A sample is worth a point in the path only where it prints differently, in speed or fan state,
-                    // readings either side of it. Differing from one of the segment's own ends is not enough on
+                    // from the points either side of it. Differing from one of the segment's own ends is not enough on
-                    // its own where the sample is the faster of the two: the segmentation pass below already
+                    // its own where the sample is not the slower or cooled of the two: the segmentation pass below
-                    // ends the slowdown an end reads, at a distance taken from how far out that end is rather
+                    // already confines the slowdown and cooling at an end, at a distance taken from how far out that
-                    // than from wherever bisection happened to stop, and a point here would leave the span
+                    // end is rather than from wherever bisection happened to stop, and a point here would leave the
-                    // beside the end too short for that pass to run at all. Support an end cannot account for,
+                    // span beside the end too short for that pass to run at all. Support an end cannot account for,
-                    // where the interior is the slower reading, is exactly what this pass is here to find.
+                    // where the interior is the slower or cooled of the two, is exactly what this pass is here to find.
-                    const bool worth_before = !same_speed(sample, before) && (!at_start || prints_slower(sample, before));
+                    const bool worth_before = !same_speed_and_fan(sample, before) && (!at_start || slower_or_cooled(sample, before));
-                    const bool worth_after  = !same_speed(sample, after) && (!at_end || prints_slower(sample, after));
+                    const bool worth_after  = !same_speed_and_fan(sample, after) && (!at_end || slower_or_cooled(sample, after));
                     if (worth_before || worth_after)
                         interior[kept++] = interior[i];
                 }
@@ -239,51 +255,59 @@ std::vector<ExtendedPoint<L::Dim>> estimate_points_properties(const POINTS&
                 (next.distance > -boundary_offset && next.distance < boundary_offset + 2.0f)) {
                 double line_len = (next.position - curr.position).norm();
 
-                // ORCA: Segment path to smaller lines by adding additional points only if the path has an overhang that
+                // ORCA: A line prints as slow as its slower end and is cooled if either end is, so an overhang at one
-                // will trigger a slowdown and the path is also reasonably large, i.e. 2mm in length or more
+                // end would otherwise slow down or cool the whole line. Split the line so that only the part beside
-                // If there is no overhang in the start/end point, dont segment it.
+                // that end prints that way, if the line is reasonably long (2mm or more) and at least one end prints
-                // Ignore this check if the control of segmentation for overhangs is disabled (min_distance=-1)
+                // slower or cooled compared with a supported point (overhang distance 0). Deciding on how the end
-                if ((min_distance > 0 && ((std::abs(curr.distance) > min_distance) || (std::abs(next.distance) > min_distance)) && line_len >= 2.f) ||
+                // prints, rather than on its overhang distance against min_distance, also catches an end whose overhang
-                    (min_distance <= 0 && line_len > 4.0f)) {
+                // distance is exactly where the slowdown begins, such as an outline crossing at half a line width.
+                // Without distance_to_speed, split every line over 4mm.
+                const bool split_line = distance_to_speed ?
+                    line_len >= 2.f && (slower_or_cooled(curr.distance, 0.f) || slower_or_cooled(next.distance, 0.f)) :
+                    line_len > 4.0f;
+                if (split_line) {
+                    // Each end's piece is that end's overhang distance plus 1.5 line widths (3 * boundary_offset) long:
+                    // a0 ends the piece beside curr, a1 starts the piece beside next.
                     double a0 = std::clamp((curr.distance + 3 * boundary_offset) / line_len, 0.0, 1.0);
                     double a1 = std::clamp(1.0f - (next.distance + 3 * boundary_offset) / line_len, 0.0, 1.0);
                     double t0 = std::min(a0, a1);
                     double t1 = std::max(a0, a1);
 
-                    if (t0 < 1.0) {
+                    // Up to two cut points, in order along the line. Each takes its own overhang distance, so every
-                        Vec p0                          = curr.position + t0 * (next.position - curr.position);
+                    // piece prints by the overhang distances at its own two ends. t0 >= 1 or t1 <= 0 falls on the
-                        auto [p0_dist, p0_near_l, p0_x] = unscaled_prev_layer.template distance_from_lines_extra<SIGNED_DISTANCE>(
+                    // line's own end, so there is no cut. A cut closer than min_spacing to either end of the line is
-                            p0.template cast<AABBScalar>());
+                    // not meaningful and is filtered out (#6714).
-                        ExtendedPoint<L::Dim> new_p{};
+                    ExtendedPoint<L::Dim> cut[2]{};
-                        new_p.position = p0;
+                    bool                  keep[2] = {false, false};
-                        new_p.distance = float(p0_dist + boundary_offset);
+                    for (int k = 0; k < 2; ++k) {
-                        // ORCA: only create a new point in the path if the new point overhang distance will be used to generate a speed change
+                        const double t = k == 0 ? t0 : t1;
-                        // or if this option is disabled (min_distance<=0)
+                        if (k == 0 ? t >= 1.0 : t <= 0.0)
-                        if( (std::abs(p0_dist) > min_distance) || (min_distance<=0)){
+                            continue;
-                            // ORCA: also filter out points that are introduced to the start of the path when their distance from the start point is
+                        const Vec p                  = curr.position + t * (next.position - curr.position);
-                            // not meaningful
+                        auto [p_dist, p_near_l, p_x] = unscaled_prev_layer.template distance_from_lines_extra<SIGNED_DISTANCE>(
-                            if ((p0 - curr.position).norm() > min_spacing && (next.position - p0).norm() > min_spacing) {
+                            p.template cast<AABBScalar>());
-                                new_points.push_back(new_p);
+                        cut[k].position = p;
-                            }
+                        cut[k].distance = float(p_dist + boundary_offset);
-                        }
+                        keep[k] = (p - curr.position).norm() > min_spacing && (next.position - p).norm() > min_spacing;
-                    }
-                    if (t1 > 0.0) {
-                        Vec p1                          = curr.position + t1 * (next.position - curr.position);
-                        auto [p1_dist, p1_near_l, p1_x] = unscaled_prev_layer.template distance_from_lines_extra<SIGNED_DISTANCE>(
-                            p1.template cast<AABBScalar>());
-                        ExtendedPoint<L::Dim> new_p{};
-                        new_p.position = p1;
-                        new_p.distance = float(p1_dist + boundary_offset);
-                        // ORCA: only create a new point in the path if the new point overhang distance will be used to generate a speed change
-                        // or if this option is disabled (min_distance<=0)
-                        if( (std::abs(p1_dist) > min_distance) || (min_distance<=0)){
-                            // ORCA: filter out points that are introduced to the end of the path when their distance from the end point is
-                            // not meaningful
-                            if ((p1 - curr.position).norm() > min_spacing && (next.position - p1).norm() > min_spacing) {
-                                new_points.push_back(new_p);
-                            }
                     }
+                    if (distance_to_speed) {
+                        // Only keep a cut that changes the G-code: one that prints differently from at least one of the
+                        // points either side of it, which are the line's ends or the other cut where that is kept. A cut
+                        // that prints like both would only split a move into two identical ones.
+                        if (keep[0])
+                            keep[0] = !same_speed_and_fan(cut[0].distance, curr.distance) ||
+                                      !same_speed_and_fan(cut[0].distance, keep[1] ? cut[1].distance : next.distance);
+                        if (keep[1])
+                            keep[1] = !same_speed_and_fan(cut[1].distance, keep[0] ? cut[0].distance : curr.distance) ||
+                                      !same_speed_and_fan(cut[1].distance, next.distance);
+                        // Two cuts closer together than min_spacing would leave a micro segment between them, so only the
+                        // first is kept.
+                        if (keep[0] && keep[1] && (cut[1].position - cut[0].position).norm() <= min_spacing)
+                            keep[1] = false;
                     }
+                    for (int k = 0; k < 2; ++k)
+                        if (keep[k])
+                            new_points.push_back(cut[k]);
                 }
             }
             new_points.push_back(next);
@@ -423,7 +447,10 @@ public:
                                                            const ConfigOptionFloatsOrPercents &speeds,
                                                            float                               ext_perimeter_speed,
                                                            float                               original_speed,
-                                                           bool								   slowdown_for_curled_edges)
+                                                           bool								   slowdown_for_curled_edges,
+                                                           // Overlap at or below which the overhang fan switches on; negative when the fan
+                                                           // does not depend on overlap.
+                                                           float                               fan_overlap_threshold = -1.0f)
     {
         size_t                               speed_sections_count = std::min(overlaps.values.size(), speeds.values.size());
         std::vector<std::pair<float, float>> speed_sections;
@@ -463,7 +490,8 @@ public:
             }
         }
 
-        // If a meaningful (i.e. needing slowdown) overhang distance was not found, then we shouldn't split the lines
+        // If no overhang distance slows this path down, -1 turns interior sampling off unless the overhang fan can switch.
+        // Lines are only split where an end prints slower or cooled, so here only a fan switch splits them.
         if (!found)
             smallest_distance_with_lower_speed=-1.f;
 
@@ -487,9 +515,17 @@ public:
             return round(final_speed);
         };
 
+        // ORCA: The speed sections are built from ext_perimeter_speed, which can be above the speed this path prints at
+        // (original_speed, e.g. held down by resonance avoidance). Every segment is capped at original_speed below, so
+        // overhang distances whose speeds differ only above it print the same and must not count as a speed change when
+        // the path is split.
+        auto effective_speed = [&calculate_speed, original_speed](float distance) {
+            return std::min(calculate_speed(distance), original_speed);
+        };
+
         std::vector<ExtendedPoint<3>> extended_points =
             estimate_points_properties<true, true, true, true>(path.polyline.points, prev_layer_boundaries[current_object], path.width, -1,
-                                                               smallest_distance_with_lower_speed, calculate_speed);
+                                                               smallest_distance_with_lower_speed, effective_speed, fan_overlap_threshold);
         const auto width_inv = 1.0f / path.width;
         std::vector<ProcessedPoint> processed_points;
         processed_points.reserve(extended_points.size());

src/libvgcode/include/Types.hpp

@@ -158,21 +158,6 @@ enum class EGCodeExtrusionRole : uint8_t
 
 static constexpr std::size_t GCODE_EXTRUSION_ROLES_COUNT = static_cast<std::size_t>(EGCodeExtrusionRole::COUNT);
 
-//
-// What the reduced set, drawn while the user is dragging, holds in place of the full toolpaths
-//
-enum class EReducedDetailMode : uint8_t
-{
-    // nothing: no reduced set is built
-    Off,
-    // only the bottom and top layers of the visible range, for a caller that draws the print
-    // itself some other way
-    EndLayersOnly,
-    // every role but the infill under the skins and the gap fill: what can be seen from outside
-    ShellOnly,
-    COUNT
-};
-
 //
 // Option types
 //

src/libvgcode/include/Viewer.hpp

@@ -114,19 +114,6 @@ public:
     //
     bool is_dim_previous_layers() const;
     void set_dim_previous_layers(bool value);
-    //
-    // The reduced set drawn while the user drags: what the mode keeps, and always the bottom and
-    // top layers of the visible range. While a mode is set it is built alongside the full set, so
-    // set_reduced_detail() rebuilds nothing. Ignored on the OpenGL ES path.
-    //
-    EReducedDetailMode get_reduced_detail_mode() const;
-    void set_reduced_detail_mode(EReducedDetailMode mode);
-    // Whether the shell mode hides the infill roles; off for a profile that leaves them on the
-    // surface, with no top or bottom shell or no walls.
-    bool get_reduced_detail_hide_infill() const;
-    void set_reduced_detail_hide_infill(bool value);
-    void set_reduced_detail(bool value);
-    bool is_reduced_detail() const;
     float get_dim_previous_layers_brightness() const;
     void set_dim_previous_layers_brightness(float value);
     //

src/libvgcode/src/Settings.hpp

@@ -25,11 +25,6 @@ struct Settings
 		// ORCA: how bright those darkened layers are rendered, 1.0 = unchanged, 0.0 = black
 		float dim_previous_layers_brightness{ 0.4f };
 		bool spiral_vase_mode{ false };
-		// what the reduced set holds and whether it is drawn. Ignored on the OpenGL ES path.
-		EReducedDetailMode reduced_detail_mode{ EReducedDetailMode::Off };
-		// whether the shell mode may hide the infill roles: false when the profile leaves them on the surface
-		bool reduced_detail_hide_infill{ true };
-		bool reduced_detail{ false };
 		//
 		// Required update flags
 		//

src/libvgcode/src/Viewer.cpp

@@ -92,36 +92,6 @@ bool Viewer::is_dim_previous_layers() const
     return m_impl->is_dim_previous_layers();
 }
 
-void Viewer::set_reduced_detail(bool value)
-{
-    m_impl->set_reduced_detail(value);
-}
-
-bool Viewer::is_reduced_detail() const
-{
-    return m_impl->is_reduced_detail();
-}
-
-EReducedDetailMode Viewer::get_reduced_detail_mode() const
-{
-    return m_impl->get_reduced_detail_mode();
-}
-
-void Viewer::set_reduced_detail_mode(EReducedDetailMode mode)
-{
-    m_impl->set_reduced_detail_mode(mode);
-}
-
-bool Viewer::get_reduced_detail_hide_infill() const
-{
-    return m_impl->get_reduced_detail_hide_infill();
-}
-
-void Viewer::set_reduced_detail_hide_infill(bool value)
-{
-    m_impl->set_reduced_detail_hide_infill(value);
-}
-
 void Viewer::set_dim_previous_layers(bool value)
 {
     m_impl->set_dim_previous_layers(value);

src/libvgcode/src/ViewerImpl.cpp

@@ -17,7 +17,6 @@
 #include <algorithm>
 #include <cmath>
 #include <numeric>
-#include <cfloat>
 
 namespace libvgcode {
 
@@ -902,17 +901,9 @@ void ViewerImpl::reset()
 #else
     m_enabled_segments_count = 0;
     m_enabled_options_count = 0;
-    m_enabled_segments_reduced_count = 0;
-    m_enabled_options_reduced_count = 0;
-    m_enabled_segments_reduced_tex_size = 0;
-    m_enabled_options_reduced_tex_size = 0;
 
     m_settings_used_for_ranges = std::nullopt;
 
-    delete_textures(m_enabled_options_reduced_tex_id);
-    delete_buffers(m_enabled_options_reduced_buf_id);
-    delete_textures(m_enabled_segments_reduced_tex_id);
-    delete_buffers(m_enabled_segments_reduced_buf_id);
     delete_textures(m_enabled_options_tex_id);
     delete_buffers(m_enabled_options_buf_id);
     delete_textures(m_enabled_segments_tex_id);
@@ -1172,17 +1163,6 @@ void ViewerImpl::load(GCodeInputData&& gcode_data)
         glsafe(glGenTextures(1, &m_enabled_options_tex_id));
         glsafe(glBindTexture(GL_TEXTURE_BUFFER, m_enabled_options_tex_id));
 
-        // create (but do not fill) the reduced counterparts of the two buffers above
-        glsafe(glGenBuffers(1, &m_enabled_segments_reduced_buf_id));
-        glsafe(glBindBuffer(GL_TEXTURE_BUFFER, m_enabled_segments_reduced_buf_id));
-        glsafe(glGenTextures(1, &m_enabled_segments_reduced_tex_id));
-        glsafe(glBindTexture(GL_TEXTURE_BUFFER, m_enabled_segments_reduced_tex_id));
-
-        glsafe(glGenBuffers(1, &m_enabled_options_reduced_buf_id));
-        glsafe(glBindBuffer(GL_TEXTURE_BUFFER, m_enabled_options_reduced_buf_id));
-        glsafe(glGenTextures(1, &m_enabled_options_reduced_tex_id));
-        glsafe(glBindTexture(GL_TEXTURE_BUFFER, m_enabled_options_reduced_tex_id));
-
         glsafe(glBindBuffer(GL_TEXTURE_BUFFER, 0));
         glsafe(glBindTexture(GL_TEXTURE_BUFFER, old_bound_texture));
 #endif // ENABLE_OPENGL_ES
@@ -1194,18 +1174,6 @@ void ViewerImpl::load(GCodeInputData&& gcode_data)
     update_colors();
 }
 
-#ifndef ENABLE_OPENGL_ES
-// the roles that lie under a skin or between walls, never seen from outside the print
-static bool is_hidden_in_shell(EGCodeExtrusionRole role)
-{
-    return role == EGCodeExtrusionRole::InternalInfill ||
-           role == EGCodeExtrusionRole::SolidInfill ||
-           role == EGCodeExtrusionRole::InternalBridgeInfill ||
-           role == EGCodeExtrusionRole::GapFill;
-}
-#endif // ENABLE_OPENGL_ES
-
-
 void ViewerImpl::update_enabled_entities()
 {
     if (m_vertices.empty())
@@ -1213,17 +1181,6 @@ void ViewerImpl::update_enabled_entities()
 
     std::vector<uint32_t> enabled_segments;
     std::vector<uint32_t> enabled_options;
-#ifndef ENABLE_OPENGL_ES
-    // the reduced set is filled by the same walk, so switching to it costs no rebuild. Whatever the
-    // mode leaves out, the bottom and top layers of the visible range are kept whole: they are the
-    // surfaces the range cuts open
-    const EReducedDetailMode reduced_mode = m_settings.reduced_detail_mode;
-    const bool build_reduced = reduced_mode != EReducedDetailMode::Off;
-    const bool hide_infill = m_settings.reduced_detail_hide_infill;
-    std::vector<uint32_t> enabled_segments_reduced;
-    std::vector<uint32_t> enabled_options_reduced;
-    const Interval& layers_range = m_layers.get_view_range();
-#endif // ENABLE_OPENGL_ES
     Interval range = m_view_range.get_visible();
 
     // when top layer only visualization is enabled, we need to render
@@ -1271,20 +1228,6 @@ void ViewerImpl::update_enabled_entities()
             enabled_options.push_back(static_cast<uint32_t>(i));
         else
             enabled_segments.push_back(static_cast<uint32_t>(i));
-
-#ifndef ENABLE_OPENGL_ES
-        if (build_reduced) {
-            const bool end_layer = v.layer_id == layers_range[0] || v.layer_id == layers_range[1];
-            if (end_layer)
-                (v.is_option() ? enabled_options_reduced : enabled_segments_reduced).push_back(static_cast<uint32_t>(i));
-            else if (reduced_mode == EReducedDetailMode::ShellOnly) {
-                if (v.is_option())
-                    enabled_options_reduced.push_back(static_cast<uint32_t>(i));
-                else if (!v.is_extrusion() || !hide_infill || !is_hidden_in_shell(v.role))
-                    enabled_segments_reduced.push_back(static_cast<uint32_t>(i));
-            }
-        }
-#endif // ENABLE_OPENGL_ES
     }
 
 #ifdef ENABLE_OPENGL_ES
@@ -1313,23 +1256,6 @@ void ViewerImpl::update_enabled_entities()
     else
         glsafe(glBufferData(GL_TEXTURE_BUFFER, 0, nullptr, GL_STATIC_DRAW));
 
-    m_enabled_segments_reduced_count = enabled_segments_reduced.size();
-    m_enabled_options_reduced_count = enabled_options_reduced.size();
-    m_enabled_segments_reduced_tex_size = enabled_segments_reduced.size() * sizeof(uint32_t);
-    m_enabled_options_reduced_tex_size = enabled_options_reduced.size() * sizeof(uint32_t);
-
-    // uploaded even when nothing was built, so that the last reduced set is released as soon as
-    // the preference is switched off
-    assert(m_enabled_segments_reduced_buf_id > 0);
-    glsafe(glBindBuffer(GL_TEXTURE_BUFFER, m_enabled_segments_reduced_buf_id));
-    glsafe(glBufferData(GL_TEXTURE_BUFFER, m_enabled_segments_reduced_tex_size,
-                        enabled_segments_reduced.empty() ? nullptr : enabled_segments_reduced.data(), GL_STATIC_DRAW));
-
-    assert(m_enabled_options_reduced_buf_id > 0);
-    glsafe(glBindBuffer(GL_TEXTURE_BUFFER, m_enabled_options_reduced_buf_id));
-    glsafe(glBufferData(GL_TEXTURE_BUFFER, m_enabled_options_reduced_tex_size,
-                        enabled_options_reduced.empty() ? nullptr : enabled_options_reduced.data(), GL_STATIC_DRAW));
-
     glsafe(glBindBuffer(GL_TEXTURE_BUFFER, 0));
 #endif // ENABLE_OPENGL_ES
 
@@ -1537,23 +1463,6 @@ void ViewerImpl::toggle_top_layer_only_view_range()
     update_colors_texture();
 }
 
-// Both decide which vertices land in the reduced set, so the sets are rebuilt.
-void ViewerImpl::set_reduced_detail_mode(EReducedDetailMode mode)
-{
-    if (m_settings.reduced_detail_mode == mode)
-        return;
-    m_settings.reduced_detail_mode = mode;
-    m_settings.update_enabled_entities = true;
-}
-
-void ViewerImpl::set_reduced_detail_hide_infill(bool value)
-{
-    if (m_settings.reduced_detail_hide_infill == value)
-        return;
-    m_settings.reduced_detail_hide_infill = value;
-    m_settings.update_enabled_entities = true;
-}
-
 // ORCA: enable/disable darkening of the layers the layer slider is not scrubbed to
 void ViewerImpl::set_dim_previous_layers(bool value)
 {
@@ -1947,8 +1856,6 @@ size_t ViewerImpl::get_used_gpu_memory() const
     ret += m_colors_tex_size;
     ret += m_enabled_segments_tex_size;
     ret += m_enabled_options_tex_size;
-    ret += m_enabled_segments_reduced_tex_size;
-    ret += m_enabled_options_reduced_tex_size;
 #endif // ENABLE_OPENGL_ES
     return ret;
 }
@@ -2165,8 +2072,7 @@ void ViewerImpl::render_segments(const Mat4x4& view_matrix, const Mat4x4& projec
 #ifdef ENABLE_OPENGL_ES
     if (m_texture_data.get_enabled_segments_count() == 0)
 #else
-    const ActiveSet segments = active_segments();
+    if (m_enabled_segments_count == 0)
-    if (segments.count == 0)
 #endif // ENABLE_OPENGL_ES
         return;
 
@@ -2193,7 +2099,7 @@ void ViewerImpl::render_segments(const Mat4x4& view_matrix, const Mat4x4& projec
     const bool top_down = !m_rendering_shadow_casters && view_matrix[10] > 0.0f;
     glsafe(glUniform1i(m_uni_segments_reverse_order_id, top_down ? 1 : 0));
 #ifndef ENABLE_OPENGL_ES
-    glsafe(glUniform1i(m_uni_segments_instance_count_id, static_cast<int>(segments.count)));
+    glsafe(glUniform1i(m_uni_segments_instance_count_id, static_cast<int>(m_enabled_segments_count)));
 #endif // ENABLE_OPENGL_ES
     // ORCA: realistic view. The depth pass writes the map it would otherwise read, so it shades
     // with the lookup off.
@@ -2243,10 +2149,10 @@ void ViewerImpl::render_segments(const Mat4x4& view_matrix, const Mat4x4& projec
     glsafe(glBindTexture(GL_TEXTURE_BUFFER, m_colors_tex_id));
     glsafe(glTexBuffer(GL_TEXTURE_BUFFER, GL_R32F, m_colors_buf_id));
     glsafe(glActiveTexture(GL_TEXTURE3));
-    glsafe(glBindTexture(GL_TEXTURE_BUFFER, segments.tex_id));
+    glsafe(glBindTexture(GL_TEXTURE_BUFFER, m_enabled_segments_tex_id));
-    glsafe(glTexBuffer(GL_TEXTURE_BUFFER, GL_R32UI, segments.buf_id));
+    glsafe(glTexBuffer(GL_TEXTURE_BUFFER, GL_R32UI, m_enabled_segments_buf_id));
 
-    m_segment_template.render(segments.count);
+    m_segment_template.render(m_enabled_segments_count);
 #endif // ENABLE_OPENGL_ES
 
     if (curr_cull_face)
@@ -2272,8 +2178,7 @@ void ViewerImpl::render_options(const Mat4x4& view_matrix, const Mat4x4& project
 #ifdef ENABLE_OPENGL_ES
     if (m_texture_data.get_enabled_options_count() == 0)
 #else
-    const ActiveSet options = active_options();
+    if (m_enabled_options_count == 0)
-    if (options.count == 0)
 #endif // ENABLE_OPENGL_ES
         return;
 
@@ -2331,10 +2236,10 @@ void ViewerImpl::render_options(const Mat4x4& view_matrix, const Mat4x4& project
     glsafe(glBindTexture(GL_TEXTURE_BUFFER, m_colors_tex_id));
     glsafe(glTexBuffer(GL_TEXTURE_BUFFER, GL_R32F, m_colors_buf_id));
     glsafe(glActiveTexture(GL_TEXTURE3));
-    glsafe(glBindTexture(GL_TEXTURE_BUFFER, options.tex_id));
+    glsafe(glBindTexture(GL_TEXTURE_BUFFER, m_enabled_options_tex_id));
-    glsafe(glTexBuffer(GL_TEXTURE_BUFFER, GL_R32UI, options.buf_id));
+    glsafe(glTexBuffer(GL_TEXTURE_BUFFER, GL_R32UI, m_enabled_options_buf_id));
 
-    m_option_template.render(options.count);
+    m_option_template.render(m_enabled_options_count);
 #endif // ENABLE_OPENGL_ES
 
     if (!curr_cull_face)

src/libvgcode/src/ViewerImpl.hpp

@@ -109,21 +109,6 @@ public:
     // 0.0 = black
     bool is_dim_previous_layers() const { return m_settings.dim_previous_layers; }
     void set_dim_previous_layers(bool value);
-    //
-    // Draw from the reduced set; it is already built, so this is just a buffer binding.
-    //
-    void set_reduced_detail(bool value) {
-#ifdef ENABLE_OPENGL_ES
-        // no reduced set is built on OpenGL ES
-        value = false;
-#endif // ENABLE_OPENGL_ES
-        m_settings.reduced_detail = value;
-    }
-    bool is_reduced_detail() const { return m_settings.reduced_detail; }
-    EReducedDetailMode get_reduced_detail_mode() const { return m_settings.reduced_detail_mode; }
-    void set_reduced_detail_mode(EReducedDetailMode mode);
-    bool get_reduced_detail_hide_infill() const { return m_settings.reduced_detail_hide_infill; }
-    void set_reduced_detail_hide_infill(bool value);
     float get_dim_previous_layers_brightness() const { return m_settings.dim_previous_layers_brightness; }
     void set_dim_previous_layers_brightness(float value);
 
@@ -516,15 +501,6 @@ private:
     unsigned int m_enabled_options_tex_id{ 0 };
     size_t m_enabled_options_count{ 0 };
     //
-    // OpenGL buffers to store the reduced set drawn while Settings::reduced_detail is set
-    //
-    unsigned int m_enabled_segments_reduced_buf_id{ 0 };
-    unsigned int m_enabled_segments_reduced_tex_id{ 0 };
-    size_t m_enabled_segments_reduced_count{ 0 };
-    unsigned int m_enabled_options_reduced_buf_id{ 0 };
-    unsigned int m_enabled_options_reduced_tex_id{ 0 };
-    size_t m_enabled_options_reduced_count{ 0 };
-    //
     // Caches for size of data sent to gpu, in bytes
     //
     size_t m_positions_tex_size{ 0 };
@@ -532,27 +508,6 @@ private:
     size_t m_colors_tex_size{ 0 };
     size_t m_enabled_segments_tex_size{ 0 };
     size_t m_enabled_options_tex_size{ 0 };
-    size_t m_enabled_segments_reduced_tex_size{ 0 };
-    size_t m_enabled_options_reduced_tex_size{ 0 };
-
-    // The set the next draw reads from: the reduced one while dragging, if one is built.
-    bool use_reduced_set() const { return m_settings.reduced_detail && m_settings.reduced_detail_mode != EReducedDetailMode::Off; }
-    struct ActiveSet
-    {
-        size_t count{ 0 };
-        unsigned int buf_id{ 0 };
-        unsigned int tex_id{ 0 };
-    };
-    ActiveSet active_segments() const {
-        if (use_reduced_set())
-            return { m_enabled_segments_reduced_count, m_enabled_segments_reduced_buf_id, m_enabled_segments_reduced_tex_id };
-        return { m_enabled_segments_count, m_enabled_segments_buf_id, m_enabled_segments_tex_id };
-    }
-    ActiveSet active_options() const {
-        if (use_reduced_set())
-            return { m_enabled_options_reduced_count, m_enabled_options_reduced_buf_id, m_enabled_options_reduced_tex_id };
-        return { m_enabled_options_count, m_enabled_options_buf_id, m_enabled_options_tex_id };
-    }
 #endif // ENABLE_OPENGL_ES
 
     //