Merge branch 'main' into fix/cli-printable-height

Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>

src/OrcaSlicer.cpp

@@ -1913,7 +1913,10 @@ int CLI::run(int argc, char **argv)
                         old_printable_width = static_cast<int>(old_printable_bbox.size().x());
                         old_printable_depth = static_cast<int>(old_printable_bbox.size().y());
                     }
-                    old_printable_height = (int)(config.opt_float("printable_height"));
+                    // A 3mf can carry an empty project_settings.config - the models in
+                    // resources/handy_models do - and opt_float() dereferences without checking.
+                    if (config.option<ConfigOptionFloat>("printable_height"))
+                        old_printable_height = (int)(config.opt_float("printable_height"));
 
                     if (config.option<ConfigOptionFloat>("extruder_clearance_height_to_rod"))
                         old_height_to_rod = config.opt_float("extruder_clearance_height_to_rod");
@@ -2592,7 +2595,8 @@ int CLI::run(int argc, char **argv)
                             orig_printable_width = static_cast<int>(orig_printable_bbox.size().x());
                             orig_printable_depth = static_cast<int>(orig_printable_bbox.size().y());
                         }
-                        orig_printable_height = (int)(config.opt_float("printable_height"));
+                        if (config.option<ConfigOptionFloat>("printable_height"))
+                            orig_printable_height = (int)(config.opt_float("printable_height"));
                         BOOST_LOG_TRIVIAL(info) << __FUNCTION__<< boost::format(":%1%, check printable size: old_printable_width=%2%, orig_printable_width=%3%, old_printable_depth=%4%, orig_printable_depth=%5%, old_printable_height=%6%, orig_printable_height=%7%")
                                     %__LINE__ %old_printable_width %orig_printable_width %old_printable_depth %orig_printable_depth %old_printable_height %orig_printable_height;
                         if ((orig_printable_width > 0) && (orig_printable_depth > 0) && (orig_printable_height > 0))
@@ -2779,37 +2783,6 @@ int CLI::run(int argc, char **argv)
         fetch_compatible_values = true;
     }
 
-    // Refresh every project filament no loaded filament replaces from its current system preset, as the GUI
-    // does when it loads the project; the filament merge below keeps the keys the project lists as changed.
-    // Entries stay in slot order, which the merge's variant bookkeeping relies on.
-    std::vector<bool> load_filaments_refresh(load_filaments_config.size(), false);
-    if (is_bbl_3mf && new_printer_name.empty()) {
-        const ConfigOptionStrings *project_filament_ids = m_print_config.option<ConfigOptionStrings>("filament_ids");
-        for (size_t index = 0; index < current_filaments_system_name.size(); index++) {
-            const int slot = static_cast<int>(index) + 1;
-            if (std::find(load_filaments_index.begin(), load_filaments_index.end(), slot) != load_filaments_index.end())
-                continue;
-            std::string system_name = current_filaments_system_name[index];
-            if (system_name.empty())
-                continue;
-            PresetBundle::convert_filament_preset_name(current_printer_name, system_name);
-            DynamicPrintConfig config;
-            std::string        error;
-            if (!ensure_system_preset_resolver().resolve_system_preset(config, Preset::TYPE_FILAMENT, system_name, config_substitution_rule, error)) {
-                BOOST_LOG_TRIVIAL(warning) << boost::format("CLI: system filament preset '%1%' not resolved (%2%); filament %3% keeps its values") % system_name % error % slot;
-                continue;
-            }
-            const size_t at = std::upper_bound(load_filaments_index.begin(), load_filaments_index.end(), slot) - load_filaments_index.begin();
-            load_filaments_id.insert(load_filaments_id.begin() + at,
-                project_filament_ids != nullptr && index < project_filament_ids->size() ? project_filament_ids->values[index] : std::string());
-            load_filaments_name.insert(load_filaments_name.begin() + at, system_name);
-            load_filaments_config.insert(load_filaments_config.begin() + at, std::move(config));
-            load_filaments_index.insert(load_filaments_index.begin() + at, slot);
-            load_filaments_inherit.insert(load_filaments_inherit.begin() + at, system_name);
-            load_filaments_refresh.insert(load_filaments_refresh.begin() + at, true);
-        }
-    }
-
     //fetch upward_compatible_machine
     if (fetch_upward_values) {
         if (!current_printer_system_name.empty()) {
@@ -3500,7 +3473,7 @@ int CLI::run(int argc, char **argv)
     }
 
     //set the filament settings into print config
-    if ((load_filament_count > 0) || (up_config_to_date) || !load_filaments_config.empty())
+    if ((load_filament_count > 0) || (up_config_to_date))
     {
         //std::vector<int> filament_variant_count(filament_count, 1);
         std::vector<int> old_start_indice(filament_count, 0);
@@ -3559,8 +3532,6 @@ int CLI::run(int argc, char **argv)
         for (int index = 0; index < load_filaments_config.size(); index++) {
             DynamicPrintConfig&  config = load_filaments_config[index];
             int filament_index = load_filaments_index[index];
-            // A filament given with --load-filaments replaces the slot; a refreshed one keeps the project's changed keys.
-            const bool loaded = load_filament_count > 0 && !load_filaments_refresh[index];
             std::vector<std::string> different_keys;
 
             //ORCA: diff before load_default_gcodes_to_config, the way the process and machine
@@ -3570,12 +3541,12 @@ int CLI::run(int argc, char **argv)
             //      compared" to "compared as empty against the parent" and land in the column
             //      as an override the user never made.
             std::string filament_different_settings;
-            if (loaded)
+            if (load_filament_count > 0)
                 filament_different_settings = cli_different_settings(config, load_filaments_inherit[index], Preset::TYPE_FILAMENT);
 
             load_default_gcodes_to_config(config, Preset::TYPE_FILAMENT);
 
-            if (loaded) {
+            if (load_filament_count > 0) {
                 ConfigOptionStrings *opt_filament_settings = static_cast<ConfigOptionStrings *> (m_print_config.option("filament_settings_id", true));
                 std::string& filament_name = load_filaments_name[index];
                 ConfigOptionString* filament_name_setting = new ConfigOptionString(filament_name);
@@ -3647,7 +3618,7 @@ int CLI::run(int argc, char **argv)
                     flush_and_exit(CLI_CONFIG_FILE_ERROR);
                 }
 
-                if (!loaded && !different_keys_set.empty())
+                if ((load_filament_count == 0) && !different_keys_set.empty())
                 {
                     std::set<std::string>::iterator iter = different_keys_set.find(opt_key);
                     if ( iter != different_keys_set.end()) {
@@ -4691,7 +4662,8 @@ int CLI::run(int argc, char **argv)
                 BoundingBoxf temp_printable_bbox(temp_printable_area);
                 printer_plate.printable_width = static_cast<int>(temp_printable_bbox.size().x());
                 printer_plate.printable_depth = static_cast<int>(temp_printable_bbox.size().y());
-                printer_plate.printable_height = (int)(config.opt_float("printable_height"));
+                if (config.option<ConfigOptionFloat>("printable_height"))
+                    printer_plate.printable_height = (int)(config.opt_float("printable_height"));
             }
             if (temp_exclude_area.size() >= 4) {
                 printer_plate.exclude_width = (int)(temp_exclude_area[2].x() - temp_exclude_area[0].x());

src/libslic3r/Fill/FillGyroid.cpp

@@ -5,6 +5,7 @@
 #include <cmath>
 #include <algorithm>
 #include <iostream>
+#include <limits>
 #include "FillBase.hpp"
 #include "FillGyroid.hpp"
 
@@ -123,44 +124,41 @@ static inline double f(double x, double z_sin, double z_cos, bool vertical, bool
     }
 }
 
+// Repeats one period of a wave from the last sample at or before x_min to the first one at or after x_max.
 static inline Polyline make_wave(
-    const std::vector<Vec2d>& one_period, double width, double height, double offset, double scaleFactor,
-    double z_cos, double z_sin, bool vertical, bool flip)
+    const std::vector<Vec2d>& one_period, double x_min, double x_max, double offset, double scaleFactor, bool vertical)
 {
-    std::vector<Vec2d> points = one_period;
-    double period = points.back()(0);
-    if (width != period) // do not extend if already truncated
-    {
-        points.reserve(one_period.size() * size_t(floor(width / period)));
-        points.pop_back();
+    const double period = one_period.back().x();
+    // The last sample of a period is the first one of the next.
+    const size_t n  = one_period.size() - 1;
+    double       x0 = std::floor(x_min / period) * period;
+    size_t       i  = 0;
+    while (i + 1 < n && x0 + one_period[i + 1].x() <= x_min)
+        ++i;
 
-        size_t n = points.size();
-        do {
-            points.emplace_back(points[points.size()-n].x() + period, points[points.size()-n].y());
-        } while (points.back()(0) < width - EPSILON);
-
-        points.emplace_back(Vec2d(width, f(width, z_sin, z_cos, vertical, flip)));
-    }
-
-    // and construct the final polyline to return:
     Polyline polyline;
-    polyline.points.reserve(points.size());
-    for (auto& point : points) {
-        point(1) += offset;
-        point(1) = std::clamp(double(point.y()), 0., height);
+    polyline.points.reserve(size_t((x_max - x0) / period + 1.) * n + 1);
+    for (;;) {
+        Vec2d      point(x0 + one_period[i].x(), one_period[i].y() + offset);
+        const bool last = point.x() >= x_max;
         if (vertical)
             std::swap(point(0), point(1));
         polyline.points.emplace_back((point * scaleFactor).cast<coord_t>());
+        if (last)
+            break;
+        if (++i == n) {
+            i = 0;
+            x0 += period;
+        }
     }
-
     return polyline;
 }
 
-static std::vector<Vec2d> make_one_period(double width, double scaleFactor, double z_cos, double z_sin, bool vertical, bool flip, double tolerance)
+static std::vector<Vec2d> make_one_period(double scaleFactor, double z_cos, double z_sin, bool vertical, bool flip, double tolerance)
 {
     std::vector<Vec2d> points;
     double dx = M_PI_2; // exact coordinates on main inflexion lobes
-    double limit = std::min(2*M_PI, width);
+    double limit = 2*M_PI;
     points.reserve(coord_t(ceil(limit / tolerance / 3)));
 
     for (double x = 0.; x < limit - EPSILON; x += dx) {
@@ -239,7 +237,8 @@ static inline double compute_omega_factor(double density_adjusted, double line_s
     return std::clamp(raw, 1.0, 2.0);
 }
 
-static Polylines make_gyroid_waves(double gridZ, double density_adjusted, double line_spacing, double width, double height)
+// Waves covering bbox, with the pattern anchored at origin.
+static Polylines make_gyroid_waves(double gridZ, double density_adjusted, double line_spacing, const BoundingBox &bbox, const Point &origin)
 {
     const double scaleFactor = scale_(line_spacing) / density_adjusted;
 
@@ -254,29 +253,36 @@ static Polylines make_gyroid_waves(double gridZ, double density_adjusted, double
     const double z_cos = cos(z);
 
     bool vertical = (std::abs(z_sin) <= std::abs(z_cos));
+    // Range to cover in pattern units, with the waves running along x.
+    Vec2d lo = (bbox.min - origin).cast<double>() / scaleFactor;
+    Vec2d hi = (bbox.max - origin).cast<double>() / scaleFactor;
     double lower_bound = 0.;
-    double upper_bound = height;
     bool flip = true;
     if (vertical) {
         flip = false;
         lower_bound = -M_PI;
-        upper_bound = width - M_PI_2;
-        std::swap(width,height);
+        std::swap(lo(0), lo(1));
+        std::swap(hi(0), hi(1));
     }
 
-    std::vector<Vec2d> one_period_odd = make_one_period(width, scaleFactor, z_cos, z_sin, vertical, flip, tolerance); // creates one period of the waves, so it doesn't have to be recalculated all the time
+    std::vector<Vec2d> one_period_odd = make_one_period(scaleFactor, z_cos, z_sin, vertical, flip, tolerance); // creates one period of the waves, so it doesn't have to be recalculated all the time
     flip = !flip;                                                                   // even polylines are a bit shifted
-    std::vector<Vec2d> one_period_even = make_one_period(width, scaleFactor, z_cos, z_sin, vertical, flip, tolerance);
-    Polylines result;
+    std::vector<Vec2d> one_period_even = make_one_period(scaleFactor, z_cos, z_sin, vertical, flip, tolerance);
 
-    for (double y0 = lower_bound; y0 < upper_bound + EPSILON; y0 += M_PI) {
-        // creates odd polylines
-        result.emplace_back(make_wave(one_period_odd, width, height, y0, scaleFactor, z_cos, z_sin, vertical, flip));
-        // creates even polylines
-        y0 += M_PI;
-        if (y0 < upper_bound + EPSILON) {
-            result.emplace_back(make_wave(one_period_even, width, height, y0, scaleFactor, z_cos, z_sin, vertical, flip));
+    // Every wave spans [offset + f_min, offset + f_max] across.
+    double f_min = std::numeric_limits<double>::max();
+    double f_max = std::numeric_limits<double>::lowest();
+    for (const std::vector<Vec2d> *one_period : { &one_period_odd, &one_period_even })
+        for (const Vec2d &point : *one_period) {
+            f_min = std::min(f_min, point.y());
+            f_max = std::max(f_max, point.y());
         }
+
+    Polylines result;
+    for (int i = int(std::ceil((lo.y() - f_max - lower_bound) / M_PI)); lower_bound + i * M_PI + f_min <= hi.y(); ++i) {
+        Polyline &wave = result.emplace_back(make_wave(i % 2 == 0 ? one_period_odd : one_period_even, lo.x(), hi.x(),
+                                                       lower_bound + i * M_PI, scaleFactor, vertical));
+        wave.translate(origin);
     }
 
     return result;
@@ -302,12 +308,12 @@ void FillGyroid::_fill_surface_single(
     // Distance between the gyroid waves in scaled coordinates.
     coord_t     distance = coord_t(scale_(this->spacing) / density_adjusted);
 
-    // align bounding box to a multiple of our grid module
-    bb.merge(align_to_grid(bb.min, Point(2*M_PI*distance, 2*M_PI*distance)));
+    // Anchor the pattern to our grid module; the 10-line shift keeps its established phase.
+    const coord_t shift  = coord_t(10 * scale_(this->spacing));
+    const Point   origin = align_to_grid(bb.min, Point(2*M_PI*distance, 2*M_PI*distance)) - Point(shift, shift);
 
-    // Expand the bounding box to avoid artifacts at the edges
-    coord_t expand = 10 * (scale_(this->spacing));
-    bb.offset(expand); 
+    // Keep the pattern ends and the multiline copies outside the contour.
+    bb.offset(scale_(this->spacing * params.multiline));
 
     // generate pattern
     Polylines polylines;
@@ -327,23 +333,14 @@ void FillGyroid::_fill_surface_single(
         const float density_factor = std::max(0.001f, float(params.density * DensityAdjust / params.multiline));
         const float period         = float(2.0 * M_PI) * float(this->spacing) / density_factor;
 
-        // bb is already expanded above by 10 * scale_(spacing) for edge artifacts;
-        // skip a second offset here to avoid raster-area bloat in the marching squares pass.
+        // A cell of margin for the rings closed along the raster border, and a fixed sampling grid for every region.
+        const coord_t cell = scaled(marchsq::GyroidField::gsizef);
+        bb.offset(cell);
+        bb.merge(align_to_grid(bb.min, Point(cell, cell)));
         marchsq::GyroidField sf(bb, this->z, period, float(omega));
         polylines = marchsq::get_gyroid_polylines(sf, SCALED_SPARSE_INFILL_RESOLUTION);
     } else {
-        polylines = make_gyroid_waves(
-            scale_(this->z),
-            density_adjusted,
-            this->spacing,
-            ceil(bb.size()(0) / distance) + 1.,
-            ceil(bb.size()(1) / distance) + 1.);
-
-        // The parametric generator produces wave coords relative to the grid origin;
-        // shift them into absolute layer coords. The marching-squares branch above
-        // already emits absolute coords via GyroidField::to_Point, so it skips this.
-        for (Polyline &pl : polylines)
-            pl.translate(bb.min);
+        polylines = make_gyroid_waves(scale_(this->z), density_adjusted, this->spacing, bb, origin);
     }
 
     // Apply multiline offset if needed

src/libslic3r/PresetBundle.cpp

@@ -5251,7 +5251,7 @@ static void apply_receiver_mix_relocations(DynamicPrintConfig&
 
 
 //convert the old filament preset to new one after split
-void PresetBundle::convert_filament_preset_name(const std::string& machine_name, std::string& filament_name)
+static void convert_filament_preset_name(std::string& machine_name, std::string& filament_name)
 {
     auto machine_iter = filament_preset_convert.find(machine_name);
     if (machine_iter != filament_preset_convert.end())

src/libslic3r/PresetBundle.hpp

@@ -238,9 +238,6 @@ public:
     // Keys a project keeps when its presets are loaded: those listed in its escaped
     // "different_settings_to_system" entry for the preset, plus the preset bookkeeping keys.
     static std::set<std::string> project_different_keys(const std::string &different_settings);
-    // A project filament saved under a name the current presets split per nozzle (e.g. H2D 0.6) is loaded from
-    // the preset that now holds its values.
-    static void convert_filament_preset_name(const std::string& machine_name, std::string& filament_name);
 
     PresetBundle();
     PresetBundle(const PresetBundle &rhs);

tests/cli/CMakeLists.txt

@@ -11,6 +11,13 @@ endif ()
 
 add_test(NAME cli_strict_mode
     COMMAND bash ${CMAKE_CURRENT_SOURCE_DIR}/test_cli_strict.sh $<TARGET_FILE:OrcaSlicer> ${ORCA_CLI_TEST_PYTHON})
+add_test(NAME cli_empty_project_config
+    COMMAND bash ${CMAKE_CURRENT_SOURCE_DIR}/test_cli_empty_project_config.sh $<TARGET_FILE:OrcaSlicer> ${ORCA_CLI_TEST_PYTHON} ${CMAKE_SOURCE_DIR})
+set_tests_properties(cli_empty_project_config PROPERTIES
+    LABELS "CLI;RequiresApp"
+    SKIP_RETURN_CODE 77
+    TIMEOUT 300)
+
 set_tests_properties(cli_strict_mode PROPERTIES
     LABELS "CLI;RequiresApp"
     SKIP_RETURN_CODE 77

tests/cli/test_cli_empty_project_config.sh

@@ -0,0 +1,52 @@
+#!/usr/bin/env bash
+# Regression check: a 3mf whose Metadata/project_settings.config carries no settings must load.
+#
+# The CLI reads printable_height out of the project config with opt_float(), which dereferences
+# what option<>() returns. With create = false that is null when the key is absent, so a project
+# saved without settings used to take the CLI down with a segfault. Both models in
+# resources/handy_models are such files.
+#
+# usage: test_cli_empty_project_config.sh <orca-slicer binary> <python3> <source dir>
+set -u
+
+BIN="${1:-}"
+PY="${2:-python3}"
+SRC="${3:-}"
+# 77 is the test's SKIP_RETURN_CODE.
+[ -x "$BIN" ] || { echo "SKIP: orca-slicer binary not found: $BIN"; exit 77; }
+[ -f "$SRC/resources/handy_models/OrcaBadge.3mf" ] || { echo "SKIP: handy model not found"; exit 77; }
+
+WORK="$(mktemp -d "${TMPDIR:-/tmp}/orca-cli-emptycfg.XXXXXX")"
+trap 'rm -rf "$WORK"' EXIT
+mkdir -p "$WORK/datadir"
+
+# Rewrite the project settings to an empty object, so the test holds no matter what the shipped
+# models carry later on.
+cp "$SRC/resources/handy_models/OrcaBadge.3mf" "$WORK/empty_config.3mf"
+"$PY" - "$WORK/empty_config.3mf" <<'PYEOF'
+import shutil, sys, zipfile
+
+path = sys.argv[1]
+entry = "Metadata/project_settings.config"
+with zipfile.ZipFile(path) as src:
+    items = [(i, src.read(i.filename)) for i in src.infolist()]
+with zipfile.ZipFile(path + ".new", "w", zipfile.ZIP_DEFLATED) as dst:
+    seen = False
+    for info, data in items:
+        if info.filename == entry:
+            data, seen = b"{\n}\n", True
+        dst.writestr(info, data)
+    if not seen:
+        dst.writestr(entry, b"{\n}\n")
+shutil.move(path + ".new", path)
+PYEOF
+
+"$BIN" --datadir "$WORK/datadir" --info "$WORK/empty_config.3mf" > "$WORK/info.txt" 2>&1
+rc=$?
+if [ $rc -ne 0 ]; then
+    echo "FAIL: --info on a project with empty settings exited $rc"
+    tail -20 "$WORK/info.txt"
+    exit 1
+fi
+grep -q "size_x" "$WORK/info.txt" || { echo "FAIL: --info printed no geometry"; cat "$WORK/info.txt"; exit 1; }
+echo "PASS: a project with empty settings loads"

tests/cli/test_cli_project_missing_keys.sh

@@ -1,13 +1,11 @@
 #!/usr/bin/env bash
-# End-to-end check that the CLI loads a project's printer, process and filament settings as the GUI does.
+# End-to-end check that the CLI loads a project's printer and process settings as the GUI does.
 #
 # The GUI takes every key a project does not list as changed from the project's current system preset:
 # keys saved before an option existed, and keys holding an older system value. Keys the project lists
 # in different_settings_to_system keep the project's value. A project is exported from the shipped
-# Bambu Lab P1S presets with two filaments; one printer key and one process key are removed, one printer
-# key, one process key and two filament keys (one per filament, one per extruder variant) are changed
-# without being listed, one process key and the first filament's density are changed and listed, and it
-# is sliced again: as is, with --uptodate, and with --load-filaments replacing only the second filament.
+# Bambu Lab P1S presets; one printer key and one process key are removed, one printer key and one
+# process key are changed without being listed, one key is changed and listed, and it is sliced again.
 #
 # usage: test_cli_project_missing_keys.sh <orca-slicer binary> <python3> <resources/profiles/BBL>
 set -u
@@ -47,7 +45,7 @@ slice() {
 
 slice base "$WORK/cube.stl" \
     --load-settings "$PROFILES/machine/Bambu Lab P1S 0.4 nozzle.json;$PROFILES/process/0.20mm Standard @BBL X1C.json" \
-    --load-filaments "$PROFILES/filament/Bambu PLA Basic @BBL P1S 0.4 nozzle.json;$PROFILES/filament/Bambu PLA Basic @BBL P1S 0.4 nozzle.json"
+    --load-filaments "$PROFILES/filament/Bambu PLA Basic @BBL P1S 0.4 nozzle.json"
 
 # The removed keys, with their option defaults from PrintConfig.cpp; stale keys changed without being
 # listed as different, which must come back with the system value; and a listed key the project keeps.
@@ -69,47 +67,30 @@ with zipfile.ZipFile(src) as zin, zipfile.ZipFile(dst, "w", zipfile.ZIP_DEFLATED
             for key in ("top_shell_layers", "extruder_clearance_height_to_rod"):
                 expected[key] = config[key]
                 config[key] = str(int(float(config[key])) + 1)
-            for key in ("filament_cost", "filament_max_volumetric_speed"):
-                expected[key] = config[key]
-                config[key] = [str(float(v) + 1) for v in config[key]]
             expected["wall_loops"] = str(int(config["wall_loops"]) + 1)
             config["wall_loops"] = expected["wall_loops"]
-            expected["filament_density"] = [str(float(config["filament_density"][0]) + 1)] + config["filament_density"][1:]
-            config["filament_density"] = [expected["filament_density"][0]] + [str(float(v) + 1) for v in config["filament_density"][1:]]
-            # One entry for the process, one per filament, one for the printer.
             different = config["different_settings_to_system"]
             different[0] = ";".join([k for k in different[0].split(";") if k] + ["wall_loops"])
-            different[1] = ";".join([k for k in different[1].split(";") if k] + ["filament_density"])
             data = json.dumps(config, indent=4)
         zout.writestr(item, data)
 with open(dst + ".expected.json", "w") as f:
     json.dump(expected, f)
 EOF
 
-check() {
-    if ! "$PY" - "$WORK/$1/out.3mf" "$WORK/old.3mf.expected.json" "$1" <<'EOF'
+slice project "$WORK/old.3mf"
+
+"$PY" - "$WORK/project/out.3mf" "$WORK/old.3mf.expected.json" <<'EOF'
 import json, sys, zipfile
 
 with zipfile.ZipFile(sys.argv[1]) as z:
     config = json.loads(z.read("Metadata/project_settings.config"))
 with open(sys.argv[2]) as f:
     expected = json.load(f)
-errors = ["%s: %s is %r, want %r" % (sys.argv[3], key, config.get(key), want) for key, want in expected.items() if config.get(key) != want]
+errors = ["%s is %r, want %r" % (key, config.get(key), want) for key, want in expected.items() if config.get(key) != want]
 for e in errors:
     print("FAIL: " + e)
 sys.exit(1 if errors else 0)
 EOF
-    then
-        tail -n 40 "$WORK/$1/log"
-        exit 1
-    fi
-}
-
-slice project "$WORK/old.3mf"
-check project
-slice uptodate "$WORK/old.3mf" --uptodate
-check uptodate
-# The replaced second filament takes the system values the refresh would have given it.
-slice partial "$WORK/old.3mf" --load-filaments ";$PROFILES/filament/Bambu PLA Basic @BBL P1S 0.4 nozzle.json"
-check partial
+status=$?
+[ "$status" -eq 0 ] || { tail -n 40 "$WORK/project/log"; exit 1; }
 echo "PASS"

tests/fff_print/test_fill.cpp

@@ -13,6 +13,7 @@
 #include "libslic3r/AABBTreeLines.hpp"
 #include "libslic3r/Fill/Fill.hpp"
 #include "libslic3r/Fill/FillAdaptive.hpp"
+#include "libslic3r/Fill/FillGyroid.hpp"
 #include "libslic3r/Flow.hpp"
 #include "libslic3r/Geometry.hpp"
 #include "libslic3r/IntersectionPoints.hpp"
@@ -1257,6 +1258,61 @@ TEST_CASE("Multiline infill of an object matches the infill of a larger object w
     }
 }
 
+TEST_CASE("Gyroid infill of an object matches the infill of a larger object with the same center", "[Fill]")
+{
+    const bool   optimized = GENERATE(false, true);
+    const int    multiline = GENERATE(1, 2);
+    const float  density   = GENERATE(0.05f, 0.2f);
+    const double spacing   = 0.45;
+    CAPTURE(optimized, multiline, density);
+
+    auto circle = [](double radius) {
+        Polygon contour = make_circle_num_segments(scale_(radius), 120);
+        contour.translate(Point::new_scale(100., 60.));
+        return ExPolygon(std::move(contour));
+    };
+    const ExPolygon object = circle(20.);
+    const ExPolygon larger = circle(30.);
+    auto fill = [optimized, multiline, density, spacing](const ExPolygon &region, double z) {
+        std::unique_ptr<Fill> filler(Fill::new_from_type(ipGyroid));
+        filler->spacing = spacing;
+        filler->angle   = float(M_PI / 7.);
+        filler->z       = z;
+
+        FillParams params;
+        params.density          = density;
+        params.multiline        = multiline;
+        params.gyroid_optimized = optimized;
+        params.dont_adjust      = true;
+        Surface surface(stInternal, region);
+        return filler->fill_surface(&surface, params);
+    };
+    // Away from the boundary of the object, where both are clipped and connected the same way.
+    const Polygons inner = shrink(to_polygons(object), scale_(1.));
+    auto farthest = [&inner](const Polylines &from, const Polylines &to) {
+        const AABBTreeLines::LinesDistancer<Line> tree(to_lines(to));
+        double distance = 0.;
+        for (const Polyline &path : intersection_pl(from, inner))
+            for (const Point &point : path.equally_spaced_points(scale_(0.2)))
+                distance = std::max(distance, tree.distance_from_lines<false>(point));
+        return unscale<double>(distance);
+    };
+
+    // Marching squares simplifies rings that start elsewhere in each object.
+    const double tolerance = optimized ? SPARSE_INFILL_RESOLUTION + 0.01 : 0.01;
+    // Half a z period of the waves, through both switches between horizontal and vertical waves.
+    const double wave_distance = spacing * multiline / (density * FillGyroid::DensityAdjust);
+    for (int step = 0; step <= 8; ++step) {
+        const double z = wave_distance * M_PI * step / 8.;
+        CAPTURE(z);
+        const Polylines paths = fill(object, z);
+        REQUIRE_FALSE(paths.empty());
+        const Polylines reference = fill(larger, z);
+        CHECK(farthest(reference, paths) < tolerance);
+        CHECK(farthest(paths, reference) < tolerance);
+    }
+}
+
 TEST_CASE("Multiline cubic infill follows the cubic lines without crossing itself", "[Fill]")
 {
     const int    multiline = GENERATE(2, 3);